Month: April 2021

Adding a certain compound to certain chemical reactions, such as: 24566-79-8, name is N-(6-Bromohexyl)phthalimide, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 24566-79-8, Safety of N-(6-Bromohexyl)phthalimide

General procedure: Amixture of the corresponding secondary amine 7a-d (5.5 mmol), anhydrous K2CO3 (6 mmol) andcompounds 2-4 (5 mmol) was added inCH3CN (20 ml). The mixture was heated at 65 C for 8-10 h. Thesolvent was evaporated under reduced pressure. Then water (25 mL) was added,and the mixture was extracted with dichloromethane (20 mL × 3). The combinedorganic phases were washed with saturated aqueous NaCl (30 mL), dried oversodium sulfate, and filtered. The solvent was evaporated under a vacuum. The residue was purified on a silicagel chromatography using mixtures of petroleum/acetone as eluent to obtain theoil products 8-10.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Application of 18711-15-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 18711-15-4, name is 4,6-Dichloroisatin, This compound has unique chemical properties. The synthetic route is as follows.

A solution of 4,6-dichloroisatine (7.2 g, 33 mmol) in THF (120 ml) was dropwise added under nitrogen atmosphere to 3,4-dichlorophenylmagnesium bromide (200 ml, 0.5 M in THF). The mixture was stirred 4 h at 70 C, then NH4Claq was added. After extraction in EtOAc, the organic phase was washed three times with NaOH 1 N, then dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by column chromatography on silica gel (cyclohexane/EtOAc = 8/2) to give 11 (6.73 g, 56%) as a white solid.

The chemical industry reduces the impact on the environment during synthesis 4,6-Dichloroisatin. I believe this compound will play a more active role in future production and life.

Electric Literature of 480-91-1,Some common heterocyclic compound, 480-91-1, name is Isoindolin-1-one, molecular formula is C8H7NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Isoindolin-1-one (200 mg, 1.50mmol) was dissolved in super-dry DMSO (4 mL), and Cs2CO3 (1215 mg, 3.75 mmol), CuI (58 mg, 0.30mmol) and N1,N2-dimethylethane-1,2-diamine (27 mg, 33 muL, 0.30 mmol) were added to the solution.The resulting mixture was stirred at room temperature for 10 min, after which iodobenzene (2.25mmol) was added. Then the mixture was heated to 120 C. When TLC showed that isoindolin-1-onehad been fully converted, the reaction was stopped. The mixture was extracted with ethyl acetate (20mL) and H2O (10 mL). The water phase was re-extracted with ethyl acetate (20 mL). The organic layerwas combined and washed with brine (10 mL). Then the solution was dried over anhydrous MgSO4,filtered and concentrated, and the crude residue was purified by flash chromatography over silica gelusing CH2Cl2/CH3OH as the gradient elution to afford the title compounds.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Isoindolin-1-one, its application will become more common.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Formula: C9H4F3NO3

General procedure: Sulfonated-beta-cyclodextrin (beta-CD-SO3H) (76 mg, 0.06 mmol) was dissolved in water (5 mL) at RT by stirring to get the clear solution in 50 mL round bottom ask. Further, isatin 2 (0.31 mmol) and tryptamine 1a/isotryptamine 1b (0.31 mmol) were added to the solution under constant stirring and mixture was heated at 80 C for 8-12 h. The progress of the reaction was monitored by TLC. After completion of reaction, it was cooled to room temperature, water was added to it. The aqueous phase was extracted with ethylacetate. The organic extracts were combined, washed with brine and dried over sodium sulfate. The solvent was evaporated in vacuo and the crude product obtained was puried by column chromatography using chloroform/methanol (99:1) as an eluent furnishing the product. The spectral and analytical data of all the reported products is consistent with the previous (6c,d,f) reports.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 169037-23-4.

Electric Literature of 1127-59-9,Some common heterocyclic compound, 1127-59-9, name is 7-Methylindoline-2,3-dione, molecular formula is C9H7NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Isatin 1 (3 mmol), malononitrile (0.2 g, 3 mmol,), bicyclic CH-acid 2 (3 mmol) and sodium acetate (0.025 g, 0.3 mmol) in ‘solvent-free’ manner or with additive (‘on-solvent’ manner) were grinded with a pestle and mortar at ambient temperature for 15 minutes. After the reaction was finished, the mixture was air-dried. Then the crude solid was put on filter, rinsed with water (2 mL) and EtOH (2 mL), and then dried with a water pump to isolate the spiro-oxindole 3.

The synthetic route of 1127-59-9 has been constantly updated, and we look forward to future research findings.

Related Products of 496-12-8, A common heterocyclic compound, 496-12-8, name is Isoindoline, molecular formula is C8H9N, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step two:Add to 50mL DMSO7-(4-Chlorophenyl)-1,8-naphthyridin-2-ylcarbamate (5.0 mmol) and isoporphyrin(5.5mmol),Stir at 80 C overnight.The reaction mixture was quenched with water (200 mL)Combine the organic phase,Wash with saturated sodium chloride solution,Dry over anhydrous sodium sulfate,filter,The residue was purified by silica gel column chromatography (hexane: methanol:Obtain a title in the form of a white solidCompound 1.59g,The yield was 79.6%.

The synthetic route of 496-12-8 has been constantly updated, and we look forward to future research findings.

Application of 5332-26-3,Some common heterocyclic compound, 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, molecular formula is C9H6BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: The vacuum dried intermediate 3 (0.002 mol) was then reacted with mono- and di-substituted benzoic acids (0.003 mol) separately in presence of anhydrous potassium carbonate (0.003 mol) in DMF (10 mL). The reaction mixture was stirred at room temperature for about 2 h. The progress of the reaction was monitored by TLC. After completion of the reaction, the reaction mixture was poured into ice-cold water and allowed stir for 10 min. The solid obtained was filtered and washed successively with distilled water and recrystallized from ethanol to obtain4(a-n).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(Bromomethyl)isoindoline-1,3-dione, its application will become more common.

Adding a certain compound to certain chemical reactions, such as: 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 5332-26-3, COA of Formula: C9H6BrNO2

EXAMPLE 20 Reaction of N-bromomethylphthalimide with trimethyl phosphite as described in Example 18 for N-(2-bromoethyl)phthalimide and triethyl phosphite gives dimethyl phthalimidomethylphosphonate.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(Bromomethyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

317-20-4, name is 7-Fluoroisatin, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: indolines-derivatives

Preparation 5. Synthesis of 8-F-4-CO2H-quinoline: To a solution of 7-fluoroisatin (500 mg, 3.03 mmol) in water (10 mL) at the room temperature were added aqueous NaOH solution (2.5 mL, SM, 12.5 mmol) and sodium pyruvate (400 mg, 3.66 mmol), and it?s then placed in a microwavereactor (CEM discover 5) at 110C for 10 mm. The resulting solution was cooled down and acidified to pH 2, and the dark solid was then collected. A suspension ofsolid in water (2 mL) was then placed in a 10 mL microwave tube followed by stirring at 170C (or 280 psi) in a microwave reactor for 5 mm. The desired product (brown solid, 340 mg, 60% yield) was then filtered off and collected. LRMS (M+Hj m/z: cacld 192.04, found 192.16.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3484-35-3, name is 5-Methylindolin-2-one, A new synthetic method of this compound is introduced below., SDS of cas: 3484-35-3

General procedure: To a solution of 3-substituted-5-benzylidene-2-thioxo-4-thiazolidinone (3a-3h, 8a-8f) (0.003 mol) in 1,4-dioxane (15 ml) was added HC(OEt)3 (2 ml) and BF3·Et2O (2 ml). The reaction mixture was heated to 80 C and stirring was continued at the same temperature for 4 h. The resulting 2-ethylthio-3-substituted-5-benzylidene-4-thiazolium fluoroborate (4a-4h, 9a-9f) was precipitated, filtered off, and dried without any additional purification, as starting material for the following reactions. To a mixture of thiazolium fluoroborate (4a-4h, 9a-9f) (0.003 mol) and indolin-2-one (11a-11f) (0.003 mol) in acetonitrile (15 ml) was added triethylamine (0.91 g, 0.009 mol) dropwise at 25 C, and the mixture was stirred for 4 h at the same temperature. The orange precipitate was collected and washed with ethyl acetate (8 ml). The crude product thus obtained was recrystallized from methanol or acetone to give compound (5a-5s, 10a-10s).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.