Simple exploration of 5-Amino-2-methylisoindoline-1,3-dione

The synthetic route of 2307-00-8 has been constantly updated, and we look forward to future research findings.

Electric Literature of 2307-00-8, These common heterocyclic compound, 2307-00-8, name is 5-Amino-2-methylisoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Compound 20: 2-METHYL-5 -IY2-OXO-1 -PHENYL- 1.2-DIHYDRO-3 H-INDOL-3- YLIDENE)AMINO1-2H-ISOINDOLE- 1 ,3(2H)-DIONE: A mixture of 1-phenylisatin (50 mg, 0.22 mmol) and 4-amino-N-methylpthalimide (40 mg, 0.22 mmol) was heated neat at 215 0C for 2 h. The crude material was purified by preparative TLC using a mixture of 3:7 ethyl acetate and hexane as the eluent, giving the desired product as a yellow solid (8 mg, 0.02 mmol, 10 %). 1H NMR (400 MHz): delta 7.88 (d, J = 7.8, IH), 7.83 – 7.80 (m, IH), 7.51 (t, J = 7.5, IH), 7.47 – 7.18 (m, 6H), 7.02 (t, J = 8.0, IH), 6.91 – 6.79 (m, 2H), 6.58 (d, J = 7.5, IH), 3.22 (s, 3H); ESI-MS m/z found 382 (MH+).

The synthetic route of 2307-00-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; HELICON THERAPEUTICS, INC.; WO2008/2946; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Research on new synthetic routes about 1-Acetylindolin-3-one

The synthetic route of 1-Acetylindolin-3-one has been constantly updated, and we look forward to future research findings.

Reference of 16800-68-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16800-68-3, name is 1-Acetylindolin-3-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

3 – (2 – Thienyl) propyne acid 4 – nitrophenyl-unitz (81.9 mg 0.3 mmol), was obtained. N- Acetylindole -3 -unitz 26.3 mg (0.15 mmol), the carbene-unitz (0.015 mmol), 3.96 mg, 1 diazabicycloundecene 8 – (-7 -) and methylene-methylene chloride shown in Formula 45 mul IV 0.3 mmol were placed in 3 ml a 25 ml unitunito-two-port 3h bottle, and reacted 30 C, under unituniteous conditions, and concentrated, under inert atmosphere protection, unitant-like conditions. The eluate fractions of all the products 10:1 detected were collected by chromatography with petroleum ether: ethyl acetate in the timetime as eluent column chromatography, and the solvent was evaporated to obtain the residue unit, 26 mg and gave rise 58% to unit_.

The synthetic route of 1-Acetylindolin-3-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; China Pharmaceutical University; Du Ding; Sun Kewen; (10 pag.)CN110156800; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Extracurricular laboratory: Synthetic route of 2-(2-Hydroxyethyl)isoindoline-1,3-dione

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(2-Hydroxyethyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Related Products of 3891-07-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3891-07-4, name is 2-(2-Hydroxyethyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

a synthetic process of amlodipine besylate,The difference from Embodiment 1 is thatStep 2 specifically includes:In the reaction tank,Put 350kg of toluene,Stirring,Distilling toluene,After the liquid in the water separator is full,Keep the reflux water for 60 minutes,Sampling to determine water separation,When the water content of the reflux liquid is ?0.2%,Change the reflux to distillation,Distilling off toluene,Stir and cool down,When the temperature inside the tank drops to 45 C,Filling the reaction tank with nitrogen,Continue to cool down to 5 C,40 kg of N-(2-hydroxyethyl)-phthalimide was added with stirring.Then add 20kg of sodium hydride,Plus,Close the lid,Stir at 5 C,38.4 kg of ethyl 4-chloroacetoacetate was taken in the measuring tank.45kg of toluene and mix well,Drop into the reaction tank at 5 CAdd a solution of ethyl 4-chloroacetoacetate in toluene,The dripping time is controlled at 4 hours.Plus,Continue to stir the reaction for 2 hours.Slowly warming up,The temperature of the reaction solution was slowly raised to 38 C within 5 hours.The reaction time is more than 12 hours.Warm up to 51 C and keep warm for 1 hour.Until the reaction is complete,Cooling down,Control the internal temperature of 35 C,Add 61kg glacial acetic acid,Plus,Stirring was continued for 60 minutes to stir the material in the reaction solution evenly.The internal temperature is controlled at 35 C.Add 180kg of water,Plus,Continue to stir for 30 minutes.Stop filling with nitrogen,Stop stirring,Stand still and separate the water layer into the bucket.Transfer the toluene layer to the washing tank,Transfer the water layer to the reaction tank,Add 75 kg of toluene to the reaction tank.Stir,Stand still and separate the water layer into the bucket.Then transfer the toluene layer to the washing tank.Transfer the water layer to the reaction tank,Add 75 kg of toluene to the reaction tank.Stir,Rest,Separate the water layer,Combine the toluene layer into a water wash tank,Add 100kg of 25% salt water to the washing tank.Stir for 15 minutes,Let stand for 30 minutes,Divided into the water layer,Toluene solution of 4-[(2-phthalimido)ethoxy]acetic acid ethyl acetate;The yield of amlodipine besylate was 91.1%, and the purity was 99.3%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(2-Hydroxyethyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Shanghai Fenglin Biological Technology Co., Ltd.; Zheng Yulin; Chen Yushuang; Liu Lijuan; Gao Huanhuan; Yu Yaoying; (13 pag.)CN108456160; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Introduction of a new synthetic route about tert-Butyl 5-bromoisoindoline-2-carboxylate

The synthetic route of 201940-08-1 has been constantly updated, and we look forward to future research findings.

Reference of 201940-08-1, These common heterocyclic compound, 201940-08-1, name is tert-Butyl 5-bromoisoindoline-2-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

5-Bromo-1,3-dihydro-isoindole-2-carboxylic acid tert-butyl ester (2.97 g, 10 mmol) was azeotropically dried by evaporation from toluene. Tris(dibenzylideneacetone)dipalladium (0) (228 mg, 0.25 mmol), 2-(di-tert-butylphosphino)biphenyl (149 mg, 0.50 mmol) and sodium tert-butoxide (1.34 g, 13.9 mmol) were added and the flask was purged with nitrogen. Toluene (25 mL) then N-methylpiperazine (1.33 mL, 12 mmol) were added and the mixture was heated to 800C for 2 hours. After allowing to cool to r.t. the mixture was diluted with ether, filtered through Celite and concentrated to give a residue that was purified by flash chromatography on silica (2M methanolic ammonia/dichloromethane, 1% to 3% gradient). This afforded the title compound as a brown solid (1.45g, 46%). 1H NMR (MeOH-d4) 7.15 (1H, m), 6.94-6.88 (2H, m), 4.60-4.54 (4H, m), 3.20-3.17 (4H, m), 2.63-2.60 (4H, m), 2.34 (3H, s), 1.52 (9H1 s). MS: [M+H]+ 318.

The synthetic route of 201940-08-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; WO2008/44045; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some scientific research about 5-Nitroindoline-2,3-dione

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 611-09-6, name is 5-Nitroindoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 611-09-6, SDS of cas: 611-09-6

General procedure: The mixture of the Fe(III)(at)g-C3N4 nanocomposite (70 mg, 0.35 mmol based on Fe(III)) in aqueous media (3 ml) was dispersed for 30 min. Isatin (1 mmol) and indole (2.0 mmol) were added to the mixture and stirred in reflux conditions for an appropriate time. After the reaction was completed, the crude product was extracted with ethyl acetate and dried over anhydrous Na2SO4 followed by evaporation of the solvent. The pure products were achieved by recrystallization in hot ethanol and identified by IR, 1H & 13C NMR spectral data. The nanocomposite was washed with EtOH, dried, and reused for the next run.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri; Research on Chemical Intermediates; vol. 44; 11; (2018); p. 6741 – 6751;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Introduction of a new synthetic route about 4-Bromoisoindolin-1-one

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 337536-15-9, its application will become more common.

Some common heterocyclic compound, 337536-15-9, name is 4-Bromoisoindolin-1-one, molecular formula is C8H6BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 337536-15-9

Carbon monoxide (g, 10 atm) was introduced into a 250-mL pressure tank reactor charged with a solution of 4-bromoisoindolin-l-one (3.0 g, 14.2 mmol), sodium acetate (2.32 g, 28.3 mmol), and Pd(dppf)Cl2 (517 mg, 0.71 mmol) in methanol (150 mL). The resulting solution stirred for 24 h at 100 C and was then cooled to room temperature. The resulting solution was concentrated under vacuum and the residue was diluted with 50 mL of water and extracted with 3×50 mL of ethyl acetate. The combined organic phases were washed with 100 mL of brine, dried over anhydrous sodium sulfate, filtered, and concentrated under vacuum. The residue was purified via column chromatography on silica gel (eluting with ethyl acetate/petroleum ether (1 : 1)) to afford methyl l-oxoisoindoline-4-carboxylate (2.08 g, 77%) as a light brown solid. 1H- NMR (DMSO, 300 MHz) d (ppm): 8.75 (s, 1H), 8.15 (d, J = 7.5Hz, 1H), 7.94 (d, J = 7.5Hz, 1H,), 7.65 (m, 1H ), 4.60 (s, 2H), 3.89 (s, 3H). MS: (ESI, m/z): 192[M +H]+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 337536-15-9, its application will become more common.

Reference:
Patent; FORMA THERAPEUTICS, INC.; ZHENG, Xiaozhang; MARTIN, Matthew W.; NG, Pui Yee; THOMASON, Jennifer R.; HAN, Bingsong; RUDNITSKAYA, Aleksandra; LANCIA, JR., David R.; (180 pag.)WO2019/204550; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

The important role of 1-Acetylindolin-3-one

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 16800-68-3, name is 1-Acetylindolin-3-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16800-68-3, Computed Properties of C10H9NO2

3 – (4 – Bromophenyl) propyne acid 4 – nitrophenyl-unitz (103.5 mg 0.3 mmol), was obtained. N- Acetylindole -3 -unitz 26.3 mg (0.15 mmol), the carbene-unitz (0.015 mmol), 3.96 mg, 1 diazabicycloundecene 8 – (-7 -) and methylene-methylene chloride shown in Formula 45 mul IV 0.3 mmol were placed in 3 ml a 25 ml unitunito-two-port 2h bottle, and reacted 30 C, under unituniteous conditions, and concentrated, under inert atmosphere protection, unitant-like conditions. The eluate fractions of all the products 10:1 detected were collected by chromatography with petroleum ether: ethyl acetate in the timetime as eluent column chromatography, and the solvent was evaporated to obtain the residue unit, 51 mg and gave rise 90% to unit_.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; China Pharmaceutical University; Du Ding; Sun Kewen; (10 pag.)CN110156800; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

New learning discoveries about 6-Chloroisatin

The synthetic route of 6-Chloroisatin has been constantly updated, and we look forward to future research findings.

Reference of 6341-92-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6341-92-0, name is 6-Chloroisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 19a rac-6-Chloro-3-cyclohexyl-3-hydroxy-1,3-dihydro-indol-2-one A solution of cyclohexyl magnesium bromide in ether (2.0 M, 3.10 mL, 6.25 mmol) (Aldrich) was added dropwise to a suspension of 6-chloroisatin (0.45 g, 2.5 mmol) (Crescent) in tetrahydrofuran (12.5 mL) with cooling in a -25 C. bath and magnetic stirring at such a rate that reaction temperature was kept below -10 C. Cooling bath was then removed and mixture was allowed to warm to room temperature. After stirring for an additional 2 hours, 15% aqueous ammonium chloride solution (12.5 mL) was added and mixture was extracted with ethyl acetate. Ethyl acetate layers were then washed with water, brine, combined, dried (Na2SO4), filtered and concentrated. Residue was stirred in dichloromethane at room temperature for 30 minutes and filtered to give crude rac-6-chloro-3-cyclohexyl-3-hydroxy-1,3-dihydro-indol-2-one as an off-white powder. (Yield 0.28 g, 43%).

The synthetic route of 6-Chloroisatin has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Luk, Kim-Chun; So, Sung-Sau; Zhang, Jing; Zhang, Zhuming; US2006/293319; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Brief introduction of 6-Methoxyindoline-2,3-dione

The synthetic route of 52351-75-4 has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 52351-75-4, name is 6-Methoxyindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 52351-75-4

General procedure: Suitable indoline-2,3-dione 1a-c (1.0 mmol) was dissolved in methanol (5 mL) with gentle heating, then arylhydrazine (2.4 mmol) was slowly added with stirring at room temperature. After stirring overnight, the resulting precipitate was filtered and crystallized or the reaction mixture was evaporated to dryness and the residue suitably purified.

The synthetic route of 52351-75-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Campagna, Francesco; Catto, Marco; Purgatorio, Rosa; Altomare, Cosimo D.; Carotti, Angelo; De Stradis, Angelo; Palazzo, Gerardo; European Journal of Medicinal Chemistry; vol. 46; 1; (2011); p. 275 – 284;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

The origin of a common compound about 4-Methylindolin-2-one

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Methylindolin-2-one, other downstream synthetic routes, hurry up and to see.

Adding a certain compound to certain chemical reactions, such as: 13220-46-7, name is 4-Methylindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13220-46-7, Application In Synthesis of 4-Methylindolin-2-one

A mixture of 4-methylindolin-2-one (500 mg, 3.40 mmol), l-bromo-4-iodo- benzene (1.15 g, 4.06 mmol), Cul (500 mg, 2.63 mmol), L-PROLINE (310 mg, 2.69 mmol) and CsF (1.03 g, 6.78 mmol) in EtOAc (20 mL) was stirred at 50 C for 36 hours under N2 atmosphere. A black suspension was formed. TLC (PE/EtOAc = 3/1, Rf = 0.67) showed the starting material was consumed nearly. The reaction mixture was diluted with EtOAc/EEO (2/1, 100 mL) then separated. The aqueous was extracted with EtOAc (800 mL x3). The combined organic phase was concentrated. The residue was purified by Combi Flash (15% EtOAc in PE) to give l-(4-bromophenyl)-4-methylindolin-2-one (235 mg, yield: 23%) as a light yellow solid. NMR (400 MHz, CDCb) d 2.32 (3H, s), 3.60 (2H, s), 6.62 (1H, d, J= 8.0 Hz), 6.92 (1H, d, J= 7.6 Hz), 7.13 (1H, t , J= 8.0 Hz), 7.30 (2H, d, J= 8.4 Hz), 7.65 (2H, d , J= 8.2 Hz).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Methylindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; PETRA PHARMA CORPORATION; KESICKI, Edward A.; RAVI, Kannan Karukurichi; LINDSTROeM, Johan; PERSSON, Lars Boukharta; LIVENDAHL, Madeleine; VIKLUND, Jenny; GINMAN, Tobias; FORSBLOM, Rickard; RAHM, Fredrik; HICKEY, Eugene R.; DAHLGREN, Markus K.; GERASYUTO, Aleksey I.; (478 pag.)WO2019/126733; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem