Category: indolines-derivatives

Related Products of 3891-07-4,Some common heterocyclic compound, 3891-07-4, name is 2-(2-Hydroxyethyl)isoindoline-1,3-dione, molecular formula is C10H9NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Activation of 2-(2-hydroxyethyl)isoindoline-1,3-dione to Form VA To the mixture of commercially available 2-(2-hydroxyethyl) isoindoline-1,3-dione (8.8 g. 1.00 equiv) and triethylamine (5.8 g, 1.25 equiv) in methylene chloride (69 mL) is added benzenesulfonyl chloride (9.3 g, 1.05 equiv) dropwise at under about 25 C. The mixture is stirred at room temperature until the reaction is complete as determined by HPLC. The reaction mixture is washed with an aqueous solution of sodium bicarbonate. The organic solution is concentrated under reduced pressure and the product is precipitated by adding hexanes (83 mL) to the residue. VA is isolated by filtration (15.1 g, 99% yield). 1H NMR (400 MHz, DMSO-d6): delta 7.77-7.82 (m, 4H), 7.71 (d, J=8.0, 2H), 7.52 (t, J=8.0, 1H), 7.41 (t, J=8.0, 2H), 4.29 (t, J=4.0, 2H), 3.81 (t, J=4.0, 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(2-Hydroxyethyl)isoindoline-1,3-dione, its application will become more common.

Reference:
Patent; Gilead Sciences, Inc.; Chiu, Anna; Feng, Yanshu; Gao, Hanrong; Kerschen, James A.; Reichwein, John; Sarma, Keshab; Thompson, Andrew S.; Zhao, Xinjun; US2015/225384; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 883-44-3, name is 2-(3-Hydroxypropyl)isoindoline-1,3-dione, molecular formula is C11H11NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C11H11NO3

Resin 2.7; – To all of the resin 2.6 obtained above suspended in 30 mL of dry THF is added as solids 11.02 g (42 mmole, 3 equiv) of triphenylphosphine and 8.62 g (42 mmole, 3 equiv) of N-(3-hydroxypropyl)phthalimide. The resulting suspension is agitated with a slow stream of argon through the bottom of the vessel while 8.49 g (42 mmole, 3 equiv) of diisopropylazodicarboxyate is introduced in a dropwise fashion. The resulting suspension is agitated for 18 h at 25C when the solvents are filtered and washed with CH2C12, ‘PrOH, DMF, THF then CH2C12 (3 x 75 mL each). The resin is dried under vacuum overnight to give a product that is negative by the Kaiser amine test reaction.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 883-44-3, its application will become more common.

Reference:
Patent; MEDIQUEST THERAPEUTICS, INC.; WO2005/105729; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 15362-40-0,Some common heterocyclic compound, 15362-40-0, name is 1-(2,6-Dichlorophenyl)-2-indolinone, molecular formula is C14H9Cl2NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a four-necked flask was added compound IV (233 g, 0.84 mol), potassium hydroxide (94.3 g, 1.68 mol), 10% hydrochloric acid 668 mL, zinc hydroxide (167 g, 1.68 mol), and the temperature was raised to 85 C for 8 hours , Cooling to 60 ~ 65 , vacuum filtration, filter cake and add a small amount of water to get 499.5g (compound I: diclofenac zinc), the yield of 91%.

The synthetic route of 15362-40-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Jilin University; Liaoyuan Yinying Pharmaceutical Co., Ltd.; Li Guiying; Wang Zhaokun; Li Shumei; Peng Xiaojuan; Jin Xingtong; (8 pag.)CN106905178; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 41910-64-9, These common heterocyclic compound, 41910-64-9, name is 4-Chloroindoline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 11b, Example 26b: (+)-2-[2-(4-Chloro-2,3-dihydroindol-1-yl)-2-oxoethyl]-6-(2-hydroxymethylmorpholin-4-yl)-3H-pyrimidin-4-one In a 25 ml round-bottomed flask, 42 mg of the sodium salt of [4-(2-hydroxymethylmorpholin-4-yl)-6-oxo-1,6-dihydropyrimidin-2-yl]acetic acid (example 25b, step 9b) and 22 mg of 4-chloro-2,3-dihydro-1H-indole are placed in 1 ml of dimethylformamide and 0.2 ml of pyridine, and then 33 mg of N-[3-(dimethylamino)propyl]-N?-ethylcarbodiimide hydrochloride are added. The reaction medium is stirred at ambient temperature for 20 h, then evaporated, water is added, and the resulting mixture is triturated. The solid formed is filtered off, and rinsed successively with water, then with diisopropyl ether, with methylene chloride and then with pentane. The resulting solid is dried under vacuum for 2 h. (+)-2-[2-(4-Chloro-2,3-dihydroindol-1-yl)-2-oxoethyl]-6-(2-hydroxymethylmorpholin-4-yl)-3H-pyrimidin-4-one is isolated (18 mg) in the form of a pulverulent solid (yield=31%).Mass Spectrometry:The spectra were obtained on a Waters UPLC-SQD apparatusIonization: positive and/or negative mode electrospray (ES+/-)Chromatographic Conditions: Column: Acquity BEH C18-1.7 mum-2.1¡Á50 mm Solvents: A: H2O (0.1% formic acid) B: CH3CN (0.1% formic acid) Column temperature: 50 C. Flow rate: 1 ml/min Gradient (2 min): from 5 to 50% of B in 0.8 min; 1.2 min: 100% of B; 1.85 min: 100% of B; 1.95: 5% of BAnalytical Results:Retention time Tr (min)=0.66; [M+H]+: m/z 405; [M-H]-: m/z 4031H NMR spectrum (400 MHz): 2.58 (partially masked m, 1H); 2.83 (m, 1H); 3.19 (t, J=8.7 Hz, 2H); 3.27 to 3.52 (partially masked m, 4H); 3.77 (s, 2H); 3.82 to 3.96 (m, 2H); 4.12 (m, 1H); 4.21 (t, J=8.7 Hz, 2H); 4.71 (t, J=6.1 Hz, 1H); 5.20 (s, 1H); 7.09 (d, J=7.9 Hz, 1H); 7.22 (t, J=7.9 Hz, 1H); 7.97 (d, J=7.9 Hz, 1H); 11.61 (broad s, 1H)Optical rotation: alphaD=+19 C.=0.950 mg/0.5 ml in DMSO

Statistics shows that 4-Chloroindoline is playing an increasingly important role. we look forward to future research findings about 41910-64-9.

Reference:
Patent; SANOFI; Brollo, Maurice; Carry, Jean-Christophe; Certal, Victor; Didier, Eric; Doerflinger, Gilles; EL Ahmad, Youssef; Filoche-Romme, Bruno; Halley, Frank; Karlsson, Karl Andreas; Schio, Laurent; Thompson, Fabienne; US2013/274253; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 954-81-4, name is N-(5-Bromopentyl)phthalimide, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 954-81-4, name: N-(5-Bromopentyl)phthalimide

a) 4-[5-(1,3-Dioxo-1,3-dihydro-isoindol-2-yl)-pentyloxy]-benzoic acid methyl ester A mixture of 4-hydroxy-benzoic acid methyl ester (3.01 g, 19.8 mmol), 2-(5-bromo-pentyl)-isoindole-1,3-dione (3.9 g, 13.2 mmol), and K2CO3 (1.82 g, 13.2 mmol) in acetone (150 mL) was heated to reflux for 24 h. The reaction mixture was cooled to rt and the solvents were removed in vacuo. The crude was diluted in EtOAc and washed with 1N NaOH and brine. The organic layer was dried over sodium sulfate. The solvents were removed in vacuo. The crude was recrystallized from EtOAc to afford the title compound as a white solid (4 g, 83%). 1H-NMR (CDCl3): delta 7.95-7.98 (m, 2H), 7.83-7.86 (m, 2H), 7.70-7.73 (m, 2H), 6.86-6.89 (m, 2H), 4.00 (t, 2H, J=6.22 Hz), 3.88 (s, 3H), 3.73 (t, 2H, J=7.29 Hz), 1.82-1.89 (m, 2H), 1.73-1.81 (m, 2H), 1.50-1.57 (m, 2H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Subasinghe, Nalin; Khalil, Ehab; Ali, Farah; Hufnagel, Heather Rae; Ballentine, Shelley; Travins, Jeremy M.; Leonard, Kristi A.; Bone, Roger F.; US2005/4031; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 52537-00-5,Some common heterocyclic compound, 52537-00-5, name is 6-Chloro-2,3-dihydro-1H-indole, molecular formula is C8H8ClN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 208b Preparation of rac-6,6′-Dichloro-3′-(3-chloro-benzyl)-2,3,1′,3′-tetrahydro-[1,3′]biindolyl-2′-one The mixture of rac-3-bromo-6-chloro-3-(3-chloro-benzyl)-1,3-dihydro-indol-2-one (100 mg, 0.27 mmol) (from example 1c supra), 6-chloro-2,3-dihydro-1H-indole (62 mg, 0.45 mmol) and K2CO3 (110 mg, 0.80 mmol) in DMF (1 mL) was stirred at room temperature overnight. Then water (10 mL) was added and the desired product was precipitated out. The crude product was purified by prep-HPLC to give 55 mg rac-6,6′-Dichloro-3′-(3-chloro-benzyl)-2,3,1′,3′-tetrahydro-[1,3′]biindolyl-2′-one. MS: [M+H]+=443

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 6-Chloro-2,3-dihydro-1H-indole, its application will become more common.

Reference:
Patent; Chen, Li; Yang, Song; Zhang, Jing; Zhang, Zhuming; US2008/81810; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 239463-85-5, name is (R)-3-(5-(2-Aminopropyl)-7-cyanoindolin-1-yl)propyl benzoate (2R,3R)-2,3-dihydroxysuccinate, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 239463-85-5, Safety of (R)-3-(5-(2-Aminopropyl)-7-cyanoindolin-1-yl)propyl benzoate (2R,3R)-2,3-dihydroxysuccinate

3-{5-(2R)-2-aminopropyl}-7-cyano-{2,3-dihydro-1H-indol-1-yl}propylbenzoate(2R,3R)tartarate(Mono-tartaric acid salt of the compound of formula (II)),A mixture of potassium carbonate (80 g) and a mixed solvent of acetonitrile and dimethylacetamide (ACN / DMAC = 500 mL / 500 mL) was heated to 80 DEG C and stirred for 30 minutes. To the reaction mixture70 g of 2- [2- (2,2,2-trifluoroethoxy) phenoxy] ethyl methanesulfonate (compound of formula 3) and 9.70 g of KI were added,The reaction was carried out at the same temperature for 10 hours.The reaction mixture was cooled to room temperature, 1 L of ethyl acetate and 1.5 L of water were extracted.The organic layer obtained by layer separation was washed with 1 L of brine,After drying over 40 g of anhydrous MgSO4 for 30 minutes,After washing again with 200 mL of ethyl acetate, the solvent was removed by distillation.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Dasan Medichem Co.,Ltd; Ryu, Hyung Sun; Sin, Dong Kyun; Kim, Sung Ho; Ahn, Jin Woo; Jo, Hey Jung; Moon, Sung Chul; Aum, Woon Yong; Kim, Jae Hyung; (14 pag.)KR2016/27537; (2016); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 58083-59-3, name is 6-Chloroisoindolin-1-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 58083-59-3, Safety of 6-Chloroisoindolin-1-one

A. A solution of 151 g of triethyloxonium tetrafluoroborate in 3200 ml of methylene chloride was stirred under argon at room temperature for 3.5 hours after the addition of 106.6 g of 6-chloro-2,3-dihydro-1H-isoindol-1-one. The mixture was then treated within 40 minutes with 1.28 l of saturated sodium hydrogen carbonate solution, the organic phase was separated and washed with 1.28 l of water. After drying over sodium sulphate the organic phase was filtered and evaporated. The residue was taken up in 1.3 l of diethyl ether, whereupon it was stirred at room temperature for about 30 minutes. After removing insoluble material by filtration the filtrate was evaporated. There was obtained 110.5 g of 1-ethoxy-6-chloro-3H-isoindole with a m.p. of 64¡ã-66¡ã.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Hoffmann-La Roche, Inc.; US5143912; (1992); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 17564-64-6, name is 2-(Chloromethyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., Product Details of 17564-64-6

(Bis(trimethylsilyl)amino)lithium (2.4 mL of a 1 M solution in THF, 2.4 mmol) was added dropwise to a solution of benzyl 3,3-dimethyl-4-oxo-piperidine-1-carboxylate (500 mg, 2 mmol) in THF (7 mL) at -78 C under N2. After 90 minutes, a solution of 2- (chloromethyl)isoindoline-1,3-dione (560 mg, 3 mmol) in THF (2 mL) was added. The reaction mixture was stirred for 1 hour then quenched by the addition of saturated aqueous NH4Cl solution (~2 mL). The reaction mixture was diluted with EtOAc, washed with a saturated aqueous sodium bicarbonate solution and brine. The organic phase was dried (MgSO4), filtered and concentrated in vacuo. The residue was purified by column chromatography (silica, PE/EtOAc gradient elution) and then by reverse phase chromatography (C18, MeCN / water- 0.1% ammonium hydroxide as eluent) to give benzyl 5-[(1,3-dioxoisoindolin-2-yl)methyl]-3,3-dimethyl-4-oxo-piperidine-1- carboxylate as a colourless oil (180 mg, 21%); MS m/z: 421 (M+H)+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; MERCK PATENT GMBH; VERTEX PHARMACEUTICALS INCORPORATED; BAYLY, Andrew; BLEICH, Matthew; CHARRIER, Jean-Damien; DODD, James; DURRANT, Steven; ENO, Meredith Suzanne; ETXEBARRIA I JARDI, Gorka; EVERITT, Simon; FRAYSSE, Damien; KELLY, Shazia; KNEGTEL, Ronald; MOCHALKIN, Igor; MORTIMORE, Michael; NORTH, Kiri; PORICHIS, Filippos; PULLIN, Robert; RUTHERFORD, Alistair; STORCK, Pierre-Henri; TWIN, Heather Clare; XIAO, Yufang; (1159 pag.)WO2019/148132; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 20870-79-5, name is 5-Nitroindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Safety of 5-Nitroindolin-2-one

5-Nitro-1,3-dihydro-indol-2-one (6.3 g) was hydrogenated in methanol over 10% palladium on carbon to give 3.0 g (60% yield) of 5-amino-1,3-dihydro-indol-2-one as a white solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 20870-79-5.

Reference:
Patent; Sugen, Inc.; US6846839; (2005); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem