Category: indolines-derivatives

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 71294-03-6 as follows. 71294-03-6

Example 9 Preparation of 3-(4,6-diethoxy-1,3,5-triazin-2-yl)-7-fluoro-1,3-dihydro-2H-indol-2-one 7-Fluoro-1,3-dihydro-2H-indol-2-one (1.0 g) is introduced as initial charge in 10 ml of N,N-dimethylacetamide. A solution of potassium carbonate (1.8 g) and potassium hydroxide (0.3 g) in 10 ml of water is added and the mixture is briefly after-stirred. Then, a solution of 2-chloro-4,6-diethoxy-1,3,5-triazine (3.0 g, ca. 50% purity) in 10 ml of N,N-dimethylacetamide, and 10 ml of water are added. A solid separates out from the clear yellow solution. The mixture is stirred at room temperature and further 2-chloro-4,6-diethoxy-1,3,5-triazine (1 g, ca. 50% purity) is added in two portions after 2 and 18 hours. The mixture is stirred for a further 3 hours at 30 C., admixed with 10 ml of toluene, adjusted to pH 1-2 with hydrochloric acid (10%) and after-stirred for 30 min. The solid is filtered off with suction, washed twice alternately with water and heptane and dried. This gives the title compound as solid in an HPLC purity of 99% area (1.53 g, 72% of theory). LC-MS: M+H=319 (86%). 1H NMR (400 MHz, DMSO-D6): delta (ppm)=11.3 (s, 1H), 7.59 (d, 1H), 6.96 (dd, 1H), 6.93-7.00 (m, 1H), 4.50 (q, 4H), 1.37 (t, 6H).

According to the analysis of related databases, 71294-03-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BAYER INTELLECTUAL PROPERTY GMBH; Karig, Gunter; Ford, Mark James; Siegel, Konrad; US2013/345422; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

2058-72-2, Adding some certain compound to certain chemical reactions, such as: 2058-72-2, name is 5-Bromo-1-methylindoline-2,3-dione, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2058-72-2.

General procedure: A mixture of isatin(1.0 mmol), alpha-amino acid (1.0 mmol) and acrylamide (1.0 mmol) in 4.0 mL aqueous methanol (1:3) was heated in an oil bath to reflux temperature for 40 min to 7 hours. The resulting precipitates were collected by filtration and washed with cold methanol to give the analyticallypure products 4.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2058-72-2.

Reference:
Article; Pavlovskaya, Tatyana L.; Yaremenko, Fedor G.; Lipson, Victoria V.; Shishkina, Svetlana V.; Shishkin, Oleg V.; Musatov, Vladimir I.; Karpenko, Alexander S.; Beilstein Journal of Organic Chemistry; vol. 10; (2014); p. 117 – 126;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

2058-74-4,Some common heterocyclic compound, 2058-74-4, name is 1-Methylisatin, molecular formula is C9H7NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of N-methylisatin (322 mg, 2.0 mmol), phenylacethylene (306 mg, 3.0 mmol), CuI (76 mg, 0.4 mmol), and Cs2CO3 (978 mg, 3.0 mmol) in CH3CN (4.0 mL) was stirred at room temperature for 18 h. After aqueous extractive workup and column chromatographic purification process (CH2Cl2/EtOAc, 15:1) 1a was obtained as a pale yellow soild, 347 mg (66%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Methylisatin, its application will become more common.

Reference:
Article; Roh, Hwa Jung; Kim, Su Yeon; Min, Beom Kyu; Kim, Jae Nyoung; Tetrahedron Letters; vol. 58; 1; (2017); p. 21 – 24;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 496-12-8, name is Isoindoline, This compound has unique chemical properties. The synthetic route is as follows., 496-12-8

To a stirred solution of [(3S,5S)-5-{[(2S)-2-cyanopyrrolidin-1-yl]carbonyl}-2-oxopyrrolidin-3-yl]acetic acid (265 mg, 0.50 mmol) and HOBt (42 mg, 0.55 mmol) in 1,4-dioxane (3 mL) was added a solution of EDC (105 mg, 0.55 mmol) in CH2Cl2 (3 mL). The mixture was stirred for 10 min at room temperature. Isoindoline (65 mg, 0.55 mmol) in CH2Cl2 (2 mL) was added with stirring. After 16 h, the reaction mixture was washed with saturated aqueous NaHCO3 (10 mL), 1 N aqueous citric acid (10 mL), and brine (10 mL). The organic layers were dried over MgSO4, filtered, and concentrated. The residue was purified over silica gel using CH2Cl2/MeOH (98:2) as an eluent to yield compound 1 (128 mg, 0.35 mmol, 70%). 1H NMR (300 MHz, CDCl3): (6/1 mixture of trans/cis amide rotomers) delta 7.30-7.26 (m, 4H), 6.56 (s, 0.86H), 6.06 (s, 0.14H), 4.82-4.77 (m, 4.86H, overlapped two singlet at 4.82, 4.77), 4.60 (d, J=6.6 Hz, 0.14H), 4.55 (d, J=9.0 Hz, 0.14H), 4.40 (dd, J=3.0, 9.0 Hz, 0.86H), 3.61-3.04 (m, 2H), 3.02-2.88 (m, 2H), 2.68-2.36 (m, 3H), 2.29-2.12 (m, 4H). MS (ES+) m/z calcd. for C20H22N4O3: 366.17. found: 367.1 (M+H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; National Health Research Institutes; US2010/234431; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

3484-35-3, Name is 5-Methylindolin-2-one, 3484-35-3, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

General procedure: To a solution of appropriate oxindole (8a-e, 0.3 mmol) in ethanol (3 mL) was addedcorresponding aldehyde (12a-h, 0.32 mmol) and a catalytic amount of piperidine. The reactionmixture was stirred at reflux for 6-12 h (monitored by TLC). After cooling, the precipitate wasfiltered, washed with cold ethanol, and dried in air to furnish pure (Z)-3-(4′-(aminoalkoxy)-3′-methoxybenzylidene)indolin-2-one title compounds of formula (5a-t) as yellow/brown/orangesolids in moderate to excellent yields.

Statistics shows that 5-Methylindolin-2-one is playing an increasingly important role. we look forward to future research findings about 3484-35-3.

Reference:
Article; Senwar, Kishna Ram; Reddy, T. Srinivasa; Thummuri, Dinesh; Sharma, Pankaj; Bharghava, Suresh K.; Naidu; Shankaraiah, Nagula; Bioorganic and Medicinal Chemistry Letters; vol. 26; 16; (2016); p. 4061 – 4069;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

1127-59-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1127-59-9, name is 7-Methylindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of 1H-pyrazol-5-amin (1 mmol), isatin (1 mmol) and enolizable C ? H activated compound (1 mmol) in NDDES (1.5 ml)was stirred under microwave irradiation at 60¡ãC for an appropriate time. The progress of the reaction was monitored by TLC. After completion of the reaction, the mixture was cooled to room temperature and cold water was added to the reaction mixture. The precipitated solid was isolated by filtration, washed with water and purified by recrystallization from ethanol.

The synthetic route of 7-Methylindoline-2,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhang, Wei-Hong; Chen, Meng-Nan; Hao, Yi; Jiang, Xin; Zhou, Xiao-Lin; Zhang, Zhan-Hui; Journal of Molecular Liquids; vol. 278; (2019); p. 124 – 129;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

61-70-1, Adding some certain compound to certain chemical reactions, such as: 61-70-1, name is 1-Methylindolin-2-one, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 61-70-1.

General procedure: An oven-dried reflux tube equipped with a magnetic stir bar and a Teflon stopcock was charged with aryl halide (1 mmol), oxindole (1 mmol),potassium carbonate (1.1 mmol), catalyst nanoparticles (0.05 mmol)and 1,4-dioxane (2 ml) and heated at 70 C. The mixture was vigorously stirred under these reaction conditions and completion of the reaction was monitored by TLC (EtOAc: n-hexane, 25:75). After completion of the reaction, the reaction mixture was cooled to room temperature, the magnetic nanoparticles of the catalyst were collected using a magnet. Ethyl acetate (5 mL) and water (10 mL)were added to the mixture in the next step. The aqueous layer was furtherextracted by ethyl acetate (2*5 mL). The combined organic layerswere washed with saturated brine, dried over CaCl2, filtered, and concentrated to give a residue which was purified by recrystallization from ethanol and water or by column chromatography on silica gelusing EtOAc: n-hexane, 1:7.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 61-70-1.

Reference:
Article; Moghaddam, Firouz Matloubi; Tavakoli, Ghazal; Latifi, Fatemeh; Saeednia, Borna; Catalysis Communications; vol. 75; (2016); p. 37 – 41;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

99365-40-9, A common compound: 99365-40-9, name is 6-Bromoindolin-2-one, belongs to indolines-derivatives compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

General procedure: To the phenstatin-3-aldehyde/isocombretastatin-3-aldehyde(16a-b) (0.303 mmol/0.304 mmol) prepared in the above stepwas added corresponding substituted oxindoles (17a-h)(0.303 mmol) and catalytic amount of piperidine (1.0 ml) in ethanol.Heated the reaction mixture to reflux for 4 h at 85 C. The solidcompounds obtained in the reaction vessel were filtered and washed with ethanol for 4-5 times. After complete air drying thefinal compounds phenstatin/isocombretastatin-oxindole analogs(5a-h and 6a-h) were obtained as pure solids (yield 71-90%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Bromoindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Kumar, G. Bharath; Nayak, V. Lakshma; Sayeed, Ibrahim Bin; Reddy, Vangala Santhosh; Shaik, Anver Basha; Mahesh, Rasala; Baig, Mirza Feroz; Shareef, Mohd Adil; Ravikumar; Kamal, Ahmed; Bioorganic and Medicinal Chemistry; vol. 24; 8; (2016); p. 1729 – 1740;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

71294-03-6, A common compound: 71294-03-6, name is 7-Fluoroindolin-2-one, belongs to indolines-derivatives compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

a) 7-fluoro-1,3,3-trimethylindolin-2-one To a suspension of NaH (8.79 g, 220 mmol) in tetrahydrofuran (100 ml) was added 7- fluoroindolin-2-one (8.30 g, 54.9 mmol) portionwise within 20 minutes. The reaction mixture was stirred for 30 minutes. Mel (31.2 g, 13.7 ml, 220 mmol) was added dropwise at 24-27 Cwithin 1.5 hours. The reaction mixture was stirred at room temperature for 3 hours. The reaction mixture was very carefully quenched with 20 ml saturated aqueous ammonium chloride solution at 10-15 C, then diluted with tert-butyl methyl ether and water. The aqueous phase was extracted with tert-butyl methyl ether, the combined organic phases were washed with brine and dried over sodium sulfate. The solvent was evaporated and the residue purified by silica gelchromatography using ethyl acetate heptane as eluent. The title compound was obtained as orange crystals (9.91 g).MS ESI (mz): 194.3 [(M+H)j.1H NMR (CDC13, 400 MHz): 8(ppm) = 6.99-6.97 (m, 3H), 3.43 (d, J = 2.62 Hz, 3H), 1.37 (s, 6H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7-Fluoroindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BRUNNER, Daniela; HILPERT, Hans; KOLCZEWSKI, Sabine; LIMBERG, Anja; MALBERG, Jessica; PRINSSEN, Eric; RIEMER, Claus; SHANKAR, Bavani G.; STOLL, Theodor; WO2014/202493; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

61-70-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 61-70-1, name is 1-Methylindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: An oven-dried reflux tube equipped with a magnetic stir bar and a Teflon stopcock was charged with aryl halide (1 mmol), oxindole (1 mmol),potassium carbonate (1.1 mmol), catalyst nanoparticles (0.05 mmol)and 1,4-dioxane (2 ml) and heated at 70 C. The mixture was vigorously stirred under these reaction conditions and completion of the reaction was monitored by TLC (EtOAc: n-hexane, 25:75). After completion of the reaction, the reaction mixture was cooled to room temperature, the magnetic nanoparticles of the catalyst were collected using a magnet. Ethyl acetate (5 mL) and water (10 mL)were added to the mixture in the next step. The aqueous layer was furtherextracted by ethyl acetate (2*5 mL). The combined organic layerswere washed with saturated brine, dried over CaCl2, filtered, and concentrated to give a residue which was purified by recrystallization from ethanol and water or by column chromatography on silica gelusing EtOAc: n-hexane, 1:7.

The synthetic route of 61-70-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Moghaddam, Firouz Matloubi; Tavakoli, Ghazal; Latifi, Fatemeh; Saeednia, Borna; Catalysis Communications; vol. 75; (2016); p. 37 – 41;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem