Month: April 2021

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 675109-26-9, name is 6-Bromoisoindolin-1-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 6-Bromoisoindolin-1-one

General procedure: Bromoisoindolin-1-one (2.0 g, 9.43 mmol) was dissolved with warming in DMF (150 mL),then cooled to 0C. NaH (415 mg, 10.4 mmol) was added and the mixture stirred under N2 at 0C for 0.5 h. Methyl iodide (0.65 mL, 10.4 mmol) was added dropwise and the reaction allowed to warm to room temperature and stir for another I h. A small quantity of water was added to quench the reaction then the DMF removed under reduced pressure to give an oily yellow residue which was dissolved in EtOAc (150 mL). This solution waswashed with water (3×100 mL), brine (100 mL) and dried (Na2SO4)., Removal of the solvent under reduced pressure gave a solid which was purified by filtration through a plug of silica gel (10% acetone/CH2C12 as eluant). The title compound was isolated as a very pale yellow crystalline solid (1.64 g, 80%). ? H NMR [400 MHz, (CD3)2S0] oe 7.85 (dd, J= 1.5, 0.6 Hz, 1 H), 7.66 (dd, J= 8.0, 1.7 Hz, 1 H), 7.59 (d, J- 8.0 Hz, I H), 4.46 (s,2 H), 3.05 (s, 3 H). LRMS (APCI) calcd for C9H8BrNO 226, 228 (MH), found 226, 228.

The synthetic route of 675109-26-9 has been constantly updated, and we look forward to future research findings.

These common heterocyclic compound, 6872-06-6, name is 2-Methylindoline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 2-Methylindoline

General procedure: Concentrated H2SO4(1.16 mmol in the case of amine 2a or 0.65 mmol in thecase of amines 2b,c,e,f) was added to a mixture of amine2a-,e,f (1.55 mmol) and 2 (20 ml). The mixture wasstirred at 60-70 until complete dissolution of amine.6-Chloropurine (1a) (200 mg, 1.29 mmol) was then added,and the obtained mixture was refluxed for 6 h, cooled, andtreated with aqueous ammonia to 8-9 with stirring. Theprecipitate that formed was filtered off and washed withcold water (3×3 ml). Compound 3a did not need furtherpurification, compounds 3b,c,e,f were purified by silica gelflash chromatography (eluent 95:5 CHCl3-MeOH).

The synthetic route of 2-Methylindoline has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 99365-40-9, name is 6-Bromoindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 6-Bromoindolin-2-one

A solution of 0.17 g (0.82 mmol)of 6-bromoindolin-2-one, 0.25 g of bis(pinacolato)diboron and 0.20 g (0.98 mmol) of KOAc in 5 mL of DMSO was degassed with Ar sparging for 5 min, then 33 mg (0.041 mmol) of 1,1′- bis(diphenylphosphino)ferrocene-palladium(II) dichloride was added and the reaction solution was stirred at 85 0C for 18 h. The reaction solution was poured into 250 mL ofEtOAc, washed twice with a 1 M aqueous solution Of MgSO4, once with brine, then concentrated in vacuo, and purified by flash chromatography eluting with a linear gradient of 20% EtOAc in hexane to neat EtOAc to yield the title compound. MS (M+H)+ 260.

The synthetic route of 99365-40-9 has been constantly updated, and we look forward to future research findings.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 446292-07-5, name is (R)-2-(2-Hydroxy-3-((4-(3-oxomorpholino)phenyl)amino)propyl)isoindoline-1,3-dione, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C21H21N3O5

N,N-Carbonyldiimidazole (2.897kg , 1.47eq) was added to a suspension of compound according to d. ) (5.1kg, 12.114mol ) in toluene (49L) . The reaction mixture was refluxed for 3h, then at 60 0C, ethanol (14L) was added. After cooling to 25 0C, the precipitate was filtered and 4.8 kg of (S) -2- ( (2-oxo-3- (4- (3- oxomorpholino) phenyl) oxazolidin-5-yl) methyl) isoindoline- 1, 3-dione was obtained as a colorless solid (Yield 88,3 %)

According to the analysis of related databases, 446292-07-5, the application of this compound in the production field has become more and more popular.

Electric Literature of 3676-85-5, The chemical industry reduces the impact on the environment during synthesis 3676-85-5, name is 5-Aminoisoindoline-1,3-dione, I believe this compound will play a more active role in future production and life.

Example 89 N-(1,3-Dioxo-2,3-dihydro-1H-5-isoindolyl)-N’-(2,3,6-trichlorobenzyl)urea Diphenylphosphoryl azide (162 mg, 0.59 mmol, 1.2 eq) and triethylamine (60 mg, 0.59 mmol, 1.2 eq) were added to a solution of 2,3,6-trichlorophenylacetic acid (118 mg, 0.49 mmol) in toluene, and the mixture was stirred at 110C for 60 min. Thereafter, 4-aminophthalimide (80 mg, 0.49 mmol, 1.0 eq) and a minor amount of DMF were added thereto, and the mixture was stirred at 110C for 2.5 hr. After the completion of the reaction, water and ethyl acetate were added thereto, and the precipitated crystal was collected by filtration and was washed with ethyl acetate to give the title compound as a crystal (57 mg, 29.1%). MS m/z: 397, 399 1H-NMR delta: 4.63 – 4.66 (2H, m), 6.87 (1H, t, J = 5.24 Hz), 7.55 (1H, d, J = 8.54 Hz), 7.57 (1H, dd, J = 1.95, 8.05 Hz), 7.67 (2H, d, J = 8.54 Hz), 8.00 (1H, d, J = 1.71 Hz), 9.14 (1H, s), 11.09 (1H, s)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Aminoisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 552330-86-6, name is 5-Bromoisoindolin-1-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Product Details of 552330-86-6

5-Bromo-2-methylisoindolin-1-oneTo a solution of 5-bromoisoindolin-1-one (2500 mg, 11.79 mmol) in DMF (20 mL) under nitrogen, at 0 °C, was added NaH (566 mg, 14.15 mmol) and the mixture was stirred for 30 min. After which, Mel (0.885 mL, 14.15 mmol) was added dropwise and the mixture was stirred at 0 °C for 2 h. The reaction was quenched with sat. aqueous NH4CI, and extracted with EtOAc (3 x 30 mL). The organic layer was washed with brine, dried and concentrated to afford 5-bromo-2-methylisoindolin-1-one (2500 mg, 7.30 mmol, 61.9 percent yield). LC-MS: m/z 226 (M+H)+1.02 min (ret. time).

The synthetic route of 552330-86-6 has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 959235-95-1, name is 6-(Trifluoromethoxy)indoline, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 959235-95-1, Recommanded Product: 959235-95-1

A mixture of 6-(trifluoromethoxy)indoline [CAS 959235-95-1 ] (837 mg, 4.12 mmol), 2-(2-(2-((fe/t-butyldimethylsilyl)oxy)ethoxy)-4-chlorophenyl)-2-((3-methoxy-5-(1 /-/- 1 ,2,4-triazol-1 -yl)phenyl)amino)acetic acid 5d (2.196 g, 4.12 mmol), HATU (2.35 g, 6.18 mmol) and diisopropylethylamine (2 ml_, 12.36 mmol) in DMF (20 ml_) was stirred at room temperature for 2 h. The mixture was diluted with water. The resulting gummy material was taken up with EtOAc, washed with a solution of K2CO3 10% in water, water, dried over MgSO4, filtered and the solvent was concentrated under reduced pressure. The residue was purified by flashchromatography on silica gel (15-40 muiotatauiota, 80 g, heptane/EtOAc gradient 70/30 to 60/40). The pure fractions were combined and the solvent was concentrated under reduced pressure to give 2-(2-(2-((terf-butyldimethylsilyl)oxy)ethoxy)-4- chlorophenyl)-2-((3-methoxy-5-(1 H-1 ,2,4-triazol-1 -yl)phenyl)amino)-1 -(6- (trifluoromethoxy)indolin-1 -yl)ethanone 6a (1 .65 g).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

20870-79-5, name is 5-Nitroindolin-2-one, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 20870-79-5

5-Amino-2-oxindole 5-Nitro-2-oxindole (6.3 g) was hydrogenated in methanol over 10% palladium on carbon to give 3.0 g (60% yield) of the title compound as a white solid,

The synthetic route of 20870-79-5 has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 20870-79-5, name is 5-Nitroindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C8H6N2O3

To a suspension of the lactam (10.0 g, 56 mmol) in 200 ml of 1,2-dichloroethane, was added POBr3 (15.3 g, 53.2 mmol) at RT. The resulting mixture was heated at reflux temperature in a 90 C. oil bath for 0.5 hour (the reaction formed a copious amount of precipitate, and an oil bath was preferred over a heating mantle, as it provided gentle heating and avoided a darkening of the precipitate). The reaction was cooled just below reflux temperature, and imidazole (4.57 g, 62 mmol) was added in one portion. The resulting gummy suspension was heated at reflux temperature in an oil bath for another 2 hours. The reaction was cooled to RT, and 100 mL of ice-water was added. Solid NaHCO3 (ca. 50 g) was added to the mixture until no further gas was evolved. The suspension was extracted with DCM (4×), and the combined DCM extracts were washed with 300 mL of brine. The DCM extracts were filtered through silica gel and concentrated to dryness to afford a crude product. The crude product was recrystallized from chloroform to give 5.41 g of the desired compound as a white solid. The filtrate was concentrated to dryness, and the residue was purified by flash column chromatography (30% EtOAc/Hex) to give an additional 2.6 g of desired product. MS (ESI) m/e (M+H+): 242.

The synthetic route of 20870-79-5 has been constantly updated, and we look forward to future research findings.

1074-82-4, name is Potassium 1,3-dioxoisoindolin-2-ide, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 1074-82-4

To a solution of 1 -(bromomethyl)-4-methylbenzene (5 g, 27 mmol) in DMF (30 mL) was added potassium 1 ,3-dioxoisoindolin-2-ide (7.51 g, 40.5 mmol) .The mixture was stirred at 100C for 14 hours. The reaction mixture was concentrated under reduced pressure to remove DMF. The residue was purified by column chromatography (Si02, petroleum ether:ethyl acetate = 0 to 20%) to give 2-(4-methylbenzyl)isoindoline-1 ,3-dione (5.50 g, 81 % yield).1H NMR (chloroform-c/400 MHz) delta 7.85 (d, J = 3.2 Hz, 2H), 7.84 (d, J = 3.2 Hz, 2H), 7.34 (d, J = 7.6 Hz, 2H), 7.13 (d, J = 8.0 Hz, 2H), 4.82 (s, 2H), 2.32 (s, 3H).

The synthetic route of 1074-82-4 has been constantly updated, and we look forward to future research findings.