Month: April 2021

Application of 1504-06-9,Some common heterocyclic compound, 1504-06-9, name is 3-Methyloxindole, molecular formula is C9H9NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In the Schlenk bottle to point pen 1 b indicated by the 2 – indolone derivatives (29.4 mg, 0.2 mmol), butyl alcohol peroxide (t – BuOOH, 43.2 mg, 0 . 48 mmol), then adding the solvent water (2 ml), then the reactor in air atmosphere, 80 C stirring under the conditions of the reaction, TLC monitoring the reaction by the disappearance of the process until the raw material (the reaction time is 24 hours), after the reaction, the reaction solution is extracted with ethyl acetate three times, the organic phase dried with anhydrous sodium sulfate, filtered and concentrated under reduced pressure to remove the solvent, the residue by column chromatography (elution solvent: ethyl acetate/hexane) to obtain the target product I – 2. (86% Yield);

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3-Methyloxindole, its application will become more common.

Reference:
Patent; Ningbo University; Song Sizhe; Wei Wenting; Bao Wenhui; Meng Yanan; Meng Xiaoxiao; (10 pag.)CN109776387; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3484-35-3, name is 5-Methylindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 5-Methylindolin-2-one

General procedure: To a 25 mL round bottomed flask was added different substituted oxindoles 8 (0.2 mmol, 1.0 equiv.) and bromoethylsulfonium salt 9 (132.99 mg, 0.3 mmol, 1.5 equiv.), DMF (2 mL). The mixture was stirred at room temperature for 5min and Et3N (61.88 mg, 0.6 mmol, 3.0 equiv.) was added into reaction system. The mixture was stirred for 6h at room temperature until the reaction completed, quenched with saturated ammonium chloride solution (5 mL), and was extracted with EtOAc (3¡Á30 mL). The combined organic layer washed with H2O (2¡Á10 mL), dried with anhydrous sodium sulfate. After concentration, product was purified using column chromatography on silica gel with suitable eluent.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3484-35-3.

Reference:
Article; Qin, Hui; Miao, Yuanyuan; Zhang, Ke; Xu, Jian; Sun, Haopeng; Liu, Wenyuan; Feng, Feng; Qu, Wei; Tetrahedron; vol. 74; 47; (2018); p. 6809 – 6814;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 19155-24-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 19155-24-9, name is 3,3-Dimethylindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 3,3-dimethylindolin-2-one (31) (12.9 mg, 0.08 mmol), 4-bromo-2-methoxybenzonitrile (30) (17.0 mg, 0.08 mmol), COPPER (I) IODIDE (7.80 mg, 0.04 mmol), TRANS- (1R, 2R)- N, N’- DIMETHYL- CYCLOHEXANE- 1, 2- DIAMINE (11.7 mg, 0.08 mmol) and POTASSIUM PHOSPHATE (35.0 mg, 0.16 mmol) in DMSO (0.50 mL) was heated to 80C for 1.5 h, then heated to 100C for 21h. The reaction mixture was diluted with ethyl acetate, filtered through a plug of silica gel and concentrated by rotary evaporation. The resulting residue was purified by prep-HPLC to afford 4-(3,3-dimethyl-2-oxoindolin-1-yl)-2-methoxybenzonitrile (32) (8.75 mg, 37percent). 1H NMR (500 MHz, DMSO-d6) d ppm 1.41 (s, 6 H) 3.95 (s, 3 H) 6.95 (d, J=7.81 Hz, 1 H) 7.14 (t, J=7.32 Hz, 1 H) 7.20 (d, J=7.81 Hz, 1 H) 7.24 (t, J=7.81 Hz, 1 H) 7.36 (s, 1 H) 7.46 (d, J=6.83 Hz, 1 H) 7.90 (d, J=7.81 Hz, 1 H)

The synthetic route of 3,3-Dimethylindolin-2-one has been constantly updated, and we look forward to future research findings.

Reference:
Article; Guo, Chuangxing; Pairish, Mason; Linton, Angelica; Kephart, Susan; Ornelas, Martha; Nagata, Asako; Burke, Benjamin; Dong, Liming; Engebretsen, Jon; Fanjul, Andrea N.; Bioorganic and Medicinal Chemistry Letters; vol. 22; 7; (2012); p. 2572 – 2578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 25369-33-9, These common heterocyclic compound, 25369-33-9, name is 7-Chloroindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Appropriate indolin-2-one or indoline-2-thione (0.3 g) was mixed with acetic anhydride (3 mL) and 4-dimethylaminopyridine (DMAP, 1 mol %). The mixture was heated at 150 C in a round-bottomed flask equipped with an air condenser and CaCl2 guard tube. The reaction time for each reactant is provided in [Table 2] and [Table 3]. After the completion of the reaction excess acetic anhydride was evaporated under reduced pressure. The solid residue obtained in the case of the triacetylated products was suspended in cold methanol and vacuum filtered. The product collected was thoroughly washed with hexane and dried. In the case of mono and diacetylated products the solid residue was purified using flash column chromatography (FCC) (silica gel, hexanes/ethyl acetate).

The synthetic route of 25369-33-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Jha, Mukund; Chou, Ting-Yi; Blunt, Brian; Tetrahedron; vol. 67; 5; (2011); p. 982 – 989;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 366453-22-7, name is 4-Methoxyisoindolin-1-one, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 4-Methoxyisoindolin-1-one

Step c: To an ice-cold solution of [11C] (291 mg, 1.78 [MMOL)] in CH2CI2 (20 mL) was added a 1.0 M BBr3 solution in [CH2CI2] (3.6 mL, 3.6 [MMOL).] The cold bath was then removed and the resulting solution was stirred for 16 h at ambient temperature. The reaction was carefully quenched by the addition of water and the mixture was extracted with EtOAc. The combined extracts were washed with water and brine, dried [(MGS04),] filtered and evaporated to dryness to give [11D] (232 mg, 87% yield) as beige solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 366453-22-7.

Reference:
Patent; BOEHRINGER INGELHEIM (CANADA) LTD.; WO2004/26875; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7477-63-6, name is 7-Chloroisatin, A new synthetic method of this compound is introduced below., Recommanded Product: 7-Chloroisatin

General procedure: To the reaction mixture containing isatin (0.5mmol) in water (2mL), indole (0.5mmol), diethanolamine (20mol percent) was slowly added at room temperature. After thecompletion of reaction as monitored by TLC, the reaction mixture was washed with brine solution and then extracted with ethyl acetate. The organic layer was dried over anhydrous Na2SO4 and the product was purified by flash chromatography on the silica gel column using a gradient of petroleum ether/ethyl acetate, as eluent to afford pure products 1?41.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Sai Prathima, Parvathaneni; Rajesh, Pamanji; Venkateswara Rao, Janapala; Sai Kailash, Uppalapati; Sridhar, Balasubramanian; Mohan Rao, Mandapati; European Journal of Medicinal Chemistry; vol. 84; (2014); p. 155 – 159;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 20780-72-7, name is 4-Bromoisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 20780-72-7, HPLC of Formula: C8H4BrNO2

To a solution of 4-bromoisatin 30 (100 mg, 0.44 mmol) in degassed THF/H2O (3:1, 3 mL) was added potassium 4-methyphenyltrifluoroborate (123 mg, 0.62 mmol) and K3PO4 (338 mg, 1.59 mmol) followed by Pd(PPh3)2Cl2 (31 mg, 0.04 mmol). The reaction vessel was sealed and heated by microwave irradiation for 4 h at 130 ¡ãC. The reaction mixture was cooled to rt, diluted with EtOAc (5 mL) and filtered through Celite?. The organic solution was washed with brine (5 mL) and the resulting aqueous layer was further extracted with EtOAc (2*). The combined organic layers were dried (MgSO4), filtered and concentrated in vacuo to give the crude product. The product was purified via flash column chromatography (eluent 30-40 ¡ãC petrol/acetone, 4:1) to afford the title compound (42) as an orange solid (72 mg, 68percent); mp 178-179 ¡ãC; numax (solid) 3274, 3051, 2906, 1741, 1609, 1486; deltaH (400 MHz, CDCl3) 2.43 (3H, s, CH3), 6.88 (1H, d, J = 8.0 Hz, C(7)H), 7.08 (1H, d, J = 8.0 Hz, C(5)H), 7.28 (2H, d, J = 8.5 Hz, C(3′)H and C(5′)H), 7.45 (2H, d, J = 8.5 Hz, C(6′)H and C(2′)H), 7.55 (1H, app t, J = 8.0 Hz, C(6)H), 8.70 (1H, br s, NH); deltaC (125 MHz, CDCl3) 21.4, 110.8, 114.4, 125.9, 128.8, 129.0, 133.1, 138.0, 139.4, 143.8, 154.2, 159.2, 178.3; m/z (ESI-) 236 ([M-H]-, 100percent); HRMS (ESI-) C15H10NO2S- ([M-H]-) requires 236.0717; found 236.0716.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Bromoisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Gianella-Borradori, Matteo; Christou, Ivy; Bataille, Carole J.R.; Cross, Rebecca L.; Wynne, Graham M.; Greaves, David R.; Russell, Angela J.; Bioorganic and Medicinal Chemistry; vol. 23; 1; (2015); p. 241 – 263;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 317-20-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 317-20-4 name is 7-Fluoroisatin, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: In a 15 mL quartz tube equipped with a magnetic stirrer bar, isatin (1 mmol), 1,3-dicarbonyl compound (1 mmol), malononitrile (1 mmol), and Na2 eosin Y (0.02 mmol) were added successively in ethyl lactate/water (3:1, 2 mL). The reaction tube was exposed to green LED (520e525 nm, 10 W) irradiation at a distance of approximately 3 mm from bottom of the tube (SI, Fig. S1) at room temperature in air with stirring for an appropriate time. The reaction progress was monitored by TLC. Upon completion, water was added to the mixture and the solid precipitate was filtered and washed with ethanol to obtain the desired pure product.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 7-Fluoroisatin, and friends who are interested can also refer to it.

Reference:
Article; Chen, Meng-Nan; Di, Jia-Qi; Li, Jiao-Mian; Mo, Li-Ping; Zhang, Zhan-Hui; Tetrahedron; (2020);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 110568-64-4, The chemical industry reduces the impact on the environment during synthesis 110568-64-4, name is 6-Nitroisoindolin-1-one, I believe this compound will play a more active role in future production and life.

Step d:[00296] A mixture of 5-nitro-2,3-dihydro-isoindol-l-one derivative (l eq), 10% Pd-C (0.05 eq) and 10 mL AcOEt is hydrogenated at room temperature for 6hrs. The catalyst is removed by filtration through Celite and the filtrate is evaporated to afford the title compound.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Nitroisoindolin-1-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GALAPAGOS NV; MENET, Christel, Jeanne, Marie; BLANC, Javier; HODGES, Alastair, James; BURLI, Roland, Werner; BRECCIA, Perla; BLACKABY, Wesley, Peter; VAN ROMPAEY, Luc, Juliaan, Corina; FLETCHER, Stephen, Robert; WO2010/10184; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 21544-81-0,Some common heterocyclic compound, 21544-81-0, name is 4,6-Dimethoxyindoline-2,3-dione, molecular formula is C10H9NO4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Hydrogen peroxide (30 % solution in water, 30 ml) was added dropwise to a stirred solution of 4,6-dimethoxy-2,3-dioxoindoline (27 g) in a concentrated aqueous sodium hydroxide solution (33 %, 220 ml). The resultant mixture was stirred at ambient temperature for 10 minutes. Ice was added and the basicity of the mixture was reduced to pH9 by the addition of concentrated aqueous hydrochloric acid and the mixture was then acidified to pH3.5 by the addition of glacial acetic acid. The resultant precipitate was isolated, washed with water and dried overnight under vacuum to give 2-amino-4,6-dimethoxybenzoic acid (15.9 g); NMR Spectrum : (DMSOd6) 3.7 (s, 3H), 3.78 (s, 3H), 5.79 (s, 1H), 5.92 (s, 1H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4,6-Dimethoxyindoline-2,3-dione, its application will become more common.

Reference:
Patent; AstraZeneca AB; EP1292594; (2004); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem