Month: April 2021

Related Products of 24566-79-8, The chemical industry reduces the impact on the environment during synthesis 24566-79-8, name is N-(6-Bromohexyl)phthalimide, I believe this compound will play a more active role in future production and life.

General procedure: Amixture of the corresponding secondary amine 7a-d (5.5 mmol), anhydrous K2CO3 (6 mmol) andcompounds 2-4 (5 mmol) was added inCH3CN (20 ml). The mixture was heated at 65 C for 8-10 h. Thesolvent was evaporated under reduced pressure. Then water (25 mL) was added,and the mixture was extracted with dichloromethane (20 mL ¡Á 3). The combinedorganic phases were washed with saturated aqueous NaCl (30 mL), dried oversodium sulfate, and filtered. The solvent was evaporated under a vacuum. The residue was purified on a silicagel chromatography using mixtures of petroleum/acetone as eluent to obtain theoil products 8-10.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, N-(6-Bromohexyl)phthalimide, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Pan, Wanli; Hu, Ke; Bai, Ping; Yu, Lintao; Ma, Qinge; Li, Tao; Zhang, Xu; Chen, Changzhong; Peng, Kelin; Liu, Wenmin; Sang, Zhipei; Bioorganic and Medicinal Chemistry Letters; vol. 26; 10; (2016); p. 2539 – 2543;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 32372-82-0 as follows. category: indolines-derivatives

Isoindoline hydrochloride (31.1 mg, 0.2 mmol), graphene oxide (8 mg),And a stirrer is placed in the reaction tube, after replacing the inert gas,Add 1 ml of DMF and seal the reaction tube. Place the reaction tube at 150CIn the oil bath, stir the reaction for 18 hours; after cooling to room temperature,The catalyst was removed by filtration and the filtrate was diluted with 15 mL of water.And extracted with ethyl acetate 3 times, each time 15mL; combined extract,Dry with anhydrous sodium sulfate and filter. The filtrate is concentrated under reduced pressure.The crude product was purified by column chromatography with ethyl acetate:petroleum ether=1:3 (containing 1% triethylamine) as eluent. Black oil, 42% yield

According to the analysis of related databases, 32372-82-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Xiangtan University; Gong Xing; Xie Guilin; Cai Changqun; Zhang Jingyu; (19 pag.)CN107827816; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 39755-95-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 39755-95-8 as follows.

EXAMPLE 21 8-Methoxyindolo[2,1-b]quinazoline-6,12-dione STR29 Using the procedure in Example 12 and substituting isatoic anhydride for 5-chloroisatoic anhydride and 5-methoxyisatin for 5-fluoroisatin gave the title compound in 24% yield: mp 267.6-269 C.; 1 H NMR (300 MHz, DMSO-d6) delta 8.28 (d, 1H) 8.25 (d, 1H) 7.93 (d, 2H) 7.68-7.78 (m, 1H) 7.37-7.46 (m, 2H) 3.88 (s, 3H); MS (M+H)+ 279.

According to the analysis of related databases, 39755-95-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; PathoGenesis Corporation; US5441955; (1995); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 366453-22-7, name is 4-Methoxyisoindolin-1-one, A new synthetic method of this compound is introduced below., category: indolines-derivatives

Step c: To an ice-cold solution of [11C] (291 mg, 1.78 [MMOL)] in CH2CI2 (20 mL) was added a 1.0 M BBr3 solution in [CH2CI2] (3.6 mL, 3.6 [MMOL).] The cold bath was then removed and the resulting solution was stirred for 16 h at ambient temperature. The reaction was carefully quenched by the addition of water and the mixture was extracted with EtOAc. The combined extracts were washed with water and brine, dried [(MGS04),] filtered and evaporated to dryness to give [11D] (232 mg, 87% yield) as beige solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BOEHRINGER INGELHEIM (CANADA) LTD.; WO2004/26875; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 18711-13-2, name is 4,7-Dichloroindoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 18711-13-2, category: indolines-derivatives

4,7-Dichloro-3-(2-(4-cyclopropyl-2-fluorophenyl)-2-oxoethyl)-3-hydroxyindolin-2- one (EXAMPLE 18): To 4,7-dichloroindoline-2,3-dione (A) ( 261 mg, 1.21 mmol) in 15 mL of methanol were l-(4-cyclopropyl-2-fluorophenyl)ethanone (B) (280 mg, 1.57 mmol) and 10 drops of diethylamine (2). The reaction was stirred at 50C for 24 hours. The solvent was removed and the residue was purified with flash chromatography (0-5% Methanol/CH2C12) to get an off white solid. 4,7-Dichloro-3-(2-(4-cyclopropyl-2-fluorophenyl)-2-oxoethyl)-3- hydroxyindolin-2-one (EXAMPLE 18): off-white solid; 1H NMR (DMSO-d6, 400 MHz) delta 0.82 (m, 2H), 1.07 (m, 2H), 2.01(m, 1H), 3.66 (d, 1H, J=16 Hz), 4.26 (d, 1H, J=16Hz), 6.44(s, 1H), 6.91(d, 1H, J=8Hz), 7.01 (m, 2H), 7.31 (d, 1H, J=8Hz), 7.57(m, 1H), 10.96 (s, 1H). Chiral separation was performed by a method substantially similar to the method described above. LC screening was performed with: column: RegisCell, 250 mm x 4.6 mm, 5 mum, hexane/IPA (80/20), 1.5 ml/min, injection volume: 2.0 mu, pressure: 51.5 bar. Peak 1 : retention time: 5.16 min, width: 0.238 min, area: 3716.20, area %: 49.78. Peak 2: retention time: 6.49 min, width: 0.324 min, area: 3749.55, area %: 50.22.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; TOKALAS, INC.; VERNIER, Jean-michael; (82 pag.)WO2016/57698; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 25369-33-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 25369-33-9 as follows.

General procedure: A reaction mixture of the proper substituted indolin-2-ones 6,aldehyde (1.2 eq.), and piperidine (0.1 eq.) in ethanol (1 mL/0.5 mmol oxindole) was refluxed for 3-5 h, under nitrogen atmosphere. After, the mixture was cooled and put on ice, where the product precipitated. The product was filtered in vacuum with cold ethanol [10,14-17]. Finally, the product was placed in the vacuum desiccators to give the expected compound. The indolin-2-ones 3e was generated through substituted isatin in the presence of hydrazine monohydrate and ethylene glycerol, under reflux [18].

According to the analysis of related databases, 25369-33-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Nunes, Rute C.; Ribeiro, Carlos J.A.; Monteiro, Angelo; Rodrigues, Cecilia M.P.; Amaral, Joana D.; Santos, Maria M.M.; European Journal of Medicinal Chemistry; vol. 139; (2017); p. 168 – 179;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 317-20-4, name is 7-Fluoroisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 317-20-4, HPLC of Formula: C8H4FNO2

General procedure: Indoles (0.20mmol), isatins (0.10mmol), and 60 wt%PWA/MCM-41 catalyst (0.0050 g) were stirred in THF(0.3mL) at room temperature for 2.5 h and monitored byTLC. The product were purified by column chromatographyon silica gel using petroleum ether/ethyl acetate (20 : 1, 10 : 1,5 : 1, 2 : 1, 1 : 1) as the eluent. All compounds (3a-3o) werecharacterized by 1H and 13C NMR (400MHz) spectral analysis.The catalyst was separated from the reaction mixture bycentrifugalization, dried at 473K for 4 h after washing withethanol, then continued to be reused for the next reaction.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Xing, Liuzhuang; Hui, YongHai; Yang, Jinghui; Xing, Xuejian; Hou, Yadong; Wu, Yang; Fan, Kui; Wang, Wei; Journal of Chemistry; vol. 2018; (2018);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3676-85-5, name is 5-Aminoisoindoline-1,3-dione, A new synthetic method of this compound is introduced below., Recommanded Product: 5-Aminoisoindoline-1,3-dione

Example 86 N-(1,3-Dioxo-2,3-dihydro-1H-5-isoindolyl)-N’-(2-nitrobenzyl)urea Diphenylphosphoryl azide (165 mg, 0.60 mmol, 1.2 eq) and triethylamine (61 mg, 0.60 mmol, 1.2 eq) were added to a solution of 2-nitrophenylacetic acid (90 mg, 0.50 mmol) in toluene, and the mixture was stirred at 110C for 60 min. Thereafter, 4-aminophthalimide (81 mg, 0.50 mmol, 1.0 eq) and a minor amount of DMF were added thereto, and the mixture was stirred at 110C for 2 hr. After the completion of the reaction, water and ethyl acetate were added thereto, and the precipitated crystal was collected by filtration, was washed with ethyl acetate, and was further washed with a chloroform/methanol solution to give the title compound as a crystal (11 mg, 6.5%). MS m/z: 340 1H-NMR delta: 4.61 (2H, d, J = 5.37 Hz), 7.00 (1H, t, J = 5.73 Hz), 7.53 – 7.70 (4H, m), 7.76 (1H, t, J = 7.44 Hz), 8.00 (1H, s), 8.06 (1H, d, J = 7.44 Hz), 9.48 (1H, s), 11.09 (1H, s)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; KIRIN BEER KABUSHIKI KAISHA; EP1256574; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 337536-15-9,Some common heterocyclic compound, 337536-15-9, name is 4-Bromoisoindolin-1-one, molecular formula is C8H6BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A suspension of Example 1C (10.6g, 50 mmol) and 4,4,5,5,4′,4′,5′,5 -octamethyl-[2,21bi[[l,3,2]dioxaborolanyl] (15.23g, 60 mmol) in DMF (390 mL) was stirred until a clearyellow solution was obtained. The solution was then treated with potassium acetate (14.72g,150 mmol), degassed with nitrogen, treated with [1.1 -bis(diphenylphosphino)-ferrocene]dichloropalladium [H]-CH2C12 (7g, 8.5 mmol) and heated to 90 C overnight. The(R)reaction was cooled to room temperature and filtered through diatomaceous earth (Celite ),and concentrated. The concentrate was partitioned between water and ethyl acetate and/?filtered through diatomaceous earth (Celite ). The organic phase was dried (Na2SO4),filtered, and concentrated. The crude product was purified by silica gel chromatographyeluting with 100% ethyl acetate and triturated from hexanes to give 4.56g (35% yield) of thedesired product

The synthetic route of 337536-15-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ABBOTT LABORATORIES; WO2004/108672; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Product Details of 169037-23-4

General procedure: A mixture of bisarylidenepiperidin-4-one (1.36 mmoL), isatin (2.72 mmoL) and L-phenylalanine (2.72 mmoL) were heated with stirring in [bmim]Br medium (3 mL) for 1 h at 100 C. After completion of the reaction (TLC), ethyl acetate (2 x 5 mL) was added and the reaction mixture was stirred for 10 min. The organic layer was removed under reduced pressure and the crude product was purified by column chromatography (ethyl acetate:hexane v/v 3:7). 5′-Benzyl-4′-(p-methoxyphenyl)-5-(trifluoromethoxy)spiro[3,2′]oxindolopyrrolidino-4′-(p-methoxyphenyl)-1?-styryl-5-benzylidene-spiro[3′.3?]piperidin-4?-one (5l): Melting point 270-272 C; White solid, 92%; 1H-NMR (CDCl3, 400 MHz): delta/ppm 5.00 (d, J = 14.64 Hz, 1H), 4.67-4.70 (m, 1H), 4.33 (d, J = 10.24 Hz, 1H), 3.86 (d, J = 13.92 Hz, 1H), 3.81 (s, 3H), 3.79 (s, 3H), 3.76 (d, J = 16.92 Hz, 1H), 3.47 (d, J = 15.4 Hz, 1H), 3.06 (d, J = 11.72 Hz, 1H), 2.75-2.79 (dd, J = 13.96, 8.08 Hz, 1H), 2.72 (d, J = 13.92 Hz, 1H), 6.59-6.66 (m, 2H), 7.14-7.63 (m, 21H, Ar); 13C-NMR (CDCl3, 100 MHz): delta/ppm 39.6, 47.3, 52.7, 53.1, 55.3, 55.4, 61.1, 67.3, 70.9, 100.8, 109.7, 114.1, 114.4, 121.1, 122.2, 124.7, 124.9, 126.5, 127.4, 128.5, 128.6, 128.7, 129.3, 129.9, 130.1, 130.4, 134.5, 136.9, 138.3, 138.5, 138.7, 139.8, 139.8, 144.4, 179.6, 197.2. EI-MS: m/z 771 (M+). Anal. Calcd for C46H40F3N3O5: C, 71.58; H, 5.22; N, 5.44. Found: C, 71.71; H, 5.34; N, 5.56.

The synthetic route of 169037-23-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Arumugam, Natarajan; Almansour, Abdulrahman I.; Kumar, Raju Suresh; Govindasami, Periyasami; Al-thamili, Dhaifallah M.; Krishnamoorthy, Rajapandian; Periasamy, Vaiyapuri Subbarayan; Alshatwi, Ali A.; Mahalingam; Thangamani, Shankar; Menendez, J. Carlos; Molecules; vol. 23; 5; (2018);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem