Month: May 2021

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 199328-10-4 as follows. Recommanded Product: 199328-10-4

EXAMPLE I Methyl 1-acetyl-2-indolinone-5-carboxylate 10.5 g of methyl 2-indolinone-5-carboxylate (prepared analogously to Ogawa, Hidenori et al. in Chem.Pharm.Bull 36, 2253-2258 (1988)) are stirred in 30 ml of acetic anhydride for 4 hours at 140 C. The mixture is then left to cool, poured onto ice water and the precipitate is suction filtered. The product is washed with water once more, then taken up in methylene chloride, dried over sodium sulphate and concentrated by evaporation. Yield: 11 g (86% of theory), Rf value: 0.63 (silica gel, methylene chloride/methanol=50:1).

According to the analysis of related databases, 199328-10-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Boehringer Ingelheim Pharma KG; US6319918; (2001); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 15362-40-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 15362-40-0, name is 1-(2,6-Dichlorophenyl)-2-indolinone belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 9 1-(2,6-Dichlorophenyl)-3-isopropylidene-1,3-di-hydro-2H-indol-2-one 1-(2,6-Dichlorophenyl)-oxindole (27.8 g; 0.10 mole) is dissolved in 300 ml of acetone, pyrrolidine (10 ml; 0.12 mole) is measured to the solution and it is warmed to reflux temperature. The reaction mixture is refluxed for 3 hours and the solution is evaporated. The product separated in crystalline form is dissolved in dichloro-methane, extracted twice with 10% hydrogen chloride, the organic phase is dried over sodium sulfate, clarified with bone coal, filtered and evaporated. The product is used for the catalytic hydrogenation without recrystallization. Analytical samples may be obtained by recrystal-lization from ethyl acetate. Yield: 31.82 g of yellow crystal (97%). M.p.: 180-182 C. (ethyl acetate). IR (KBr): 1700 (C=O), 793 cm-1. 1H-NMR (CDCl3, TMS, 400 MHz): 2.46 (3H, s), 2.66 (3H, s), 6.40 (1H, dd, J=0.6, 7.8 Hz), 7.09 (1H, dt, J=1.2, 7.6 Hz), 7.17 (1H, dt, J=1.0, 7.6 Hz), 7.35 (1H, dd, J=7.6, 8.7 Hz), 7.50 (2H, d, J=8.2 Hz), 7.64 (1H, d, J=7.5 Hz) ppm. 13C-NMR (CDCl3, TMS, 101 MHz): 23.4, 25.4, 108.5, 122.0, 122.3, 123.7, 123.8, 127.6, 128.9, 130.4, 130.9, 135.9, 140.0, 156.1, 166.2 ppm. Analysis for the Formula C17H13Cl2NO (318.21): Calculated: C, 64.17; H, 4.12; Cl, 22.28; N, 4.40%. Found: C, 64.02; H, 4.11; Cl, 22.14; N, 4.39%.

The synthetic route of 1-(2,6-Dichlorophenyl)-2-indolinone has been constantly updated, and we look forward to future research findings.

Reference:
Patent; EGIS GYOGYSZERGYAR RT.; US2007/232619; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

19155-24-9, name is 3,3-Dimethylindolin-2-one, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 3,3-Dimethylindolin-2-one

A solution of 3,3-dimethylindolin-2-one (1.5 g, 9.31 mmol)Was dissolved in tetrahydrofuran (90 mL)The solution was cooled to 0 ° C,To this was added borane-tetrahydrofuran (37.3 mL, 37.22 mmol).The reaction solution was refluxed at 87 ° C overnight,Cooled to room temperature and quenched with methanol (10 mL).The mixture was further refluxed at 85 ° C for 2 hours, after which it was concentrated under reduced pressure.The residue was purified by silica gel column chromatography (petroleum ether / ethyl acetate (v / v) = 20/1)The title compound was obtained as a yellow oil (0.87 g, 63.5percent).

The synthetic route of 19155-24-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jiatuo Sciences Corporation; Xi Ning; Wang Ruyong; Wang Liang; (112 pag.)CN104016979; (2017); B;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 19727-83-4, name is 6-Nitroindoline, molecular formula is C8H8N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 19727-83-4

10.0 g (0.061 mol) of 6-nitro-2,3-dihydro-1H-indole (16) was dispersed in 100 ml of dimethylformamide in a synthetic nitrogen atmosphere, stirred for about 10 minutes at room temperature,12.6 g (0.068 mol) of (1-bromoethyl) benzene and 12.4 ml (0.073 mol) of diisopropylethylamine (DIPEA) were added to the reaction solution. The reaction solution was gradually heated and stirred at 100 C for 5 hours, Completed.After cooling the reaction mixture to room temperature, 100 ml of distilled water and 200 ml of ethyl acetate were added and the mixture was stirred for 30 minutes. The organic layer was separated and washed with H 2 O. The recovered organic layer was dried over anhydrous magnesium sulfate and the solvent was distilled off under reduced pressure The obtained solid product was dispersed in 50 ml of methanol, stirred for 30 minutes, filtered and dried to obtain 12.5 g of 6-nitro-2,3-dihydro-1- (1-phenylethyl)-1H-indole (76.7%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 19727-83-4, its application will become more common.

Reference:
Patent; Korea Research Institute of Chemical Technology; Shin Seung-rim; Jeon Geun; Shin Jong-il; Park Yeong-il; Ahn Gyeong-ryong; (48 pag.)KR101842495; (2018); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 320734-35-8,Some common heterocyclic compound, 320734-35-8, name is 7-Bromooxindole, molecular formula is C8H6BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of 2a-j (1.50 mmol) and 5 (1.50 mmol) in ethanol (10 mL) was treated with a catalytic amount of piperidine. The reaction mixture was stirred under reflux until complete consumption of the substituted indolin-2-ones was observed by TLC. After cooling, the precipitate was filtered, recrystallised from absolute ethanol and dried in air to furnish pure (E)-3-(benzothiazol-2-ylmethylene)indolin-2-ones 6a-j.

The synthetic route of 320734-35-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhang, Chao; Xu, Juan; Zhao, Xinyu; Kang, Congmin; Journal of Chemical Research; vol. 41; 9; (2017); p. 537 – 540;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 611-09-6, These common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 30 mg of SiO2_g-C3N4 nanocomposite was dispersed in aqueous media (3 ml) for 30 min and dimedone or 4-hydroxycoumarin (1 mmol), malononitrile (1 mmol) and isatin (1.0 mmol) were added to the mixture. Then, the mixture was stirred at reflux conditions for an appropriate time, while the reaction progress was monitored by thin layer chromatography (TLC). After the reaction was completed, ethyl acetate was employed for the extraction of crude product and the products were dried over anhydrous Na2SO4. The solvent was evaporated followed by recrystallizing of the crude product in hot ethanol, and pure products were identified by IR, 1H and 13C NMR spectral data. The SiO2_g-C3N4 nanocatalyst was washed with EtOH, dried and reused for the next run.

Statistics shows that 5-Nitroindoline-2,3-dione is playing an increasingly important role. we look forward to future research findings about 611-09-6.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri, Mohammad Ali; Research on Chemical Intermediates; vol. 44; 2; (2018); p. 1173 – 1188;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, molecular formula is C8H4ClNO4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 2,3-Dioxoindoline-5-sulfonyl chloride

A solution of rpml21 (0.211 g, 0.861 mmol) and morpholine (0.187 g, 2.139 mmol, 2.5 eq), in anhydrous DCM (7 ml) and anhydrous chloroform (1 ml) was stirred for 3h at room temperature under Ar. The yellow precipitate was collected by filtration and dried under vacuum. The crude product was used in the next step without further purification.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 132898-96-5, its application will become more common.

Reference:
Patent; UNIVERSITY OF SOUTH FLORIDA; H. LEE MOFFITT CANCER CENTER AND RESEARCH INSTITUTE, INC.; WO2007/117699; (2007); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

24566-79-8, name is N-(6-Bromohexyl)phthalimide, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: N-(6-Bromohexyl)phthalimide

2-[6-(4-phenyl-1-piperidinyl)hexyl]-1H-isoindole-1,3(2H)-dione: To the 500 ml RB-flask was added 4-phenylpiperidine hydrochloride (5 g, 25 mmol), N-(6-bromohexyl)phthalimide (15.5 g, 50 mmol), N,N-diisopropylethylamine (21.8 ml, 125 mmol), tetrabutylammonium iodide (0.2 g), and dioxane (250 ml) at room temperature. The reaction mixture was stirred at 100 oC for 72 h. The solvent was removed in vacuo and the crude product was purified by flash chromatography (98:2=Chloroform: 2N ammonia in methanol) to afford 7.67 g of the desired product (77% yield): 1H NMR (400 MHz, CDCl3) delta 7.78-7.79 (m, 2H), 7.74-7.65 (m, 2H), 7.32-7.14 (m, 5H), 3.69 (t, 2H, J=7.35 Hz), 3.06 (d, 2H, J=11.0 Hz), 2.49 (quintet, 1H, J=7.6 Hz), 2.36 (t, 2H, J=7.6 Hz), 2.02 (t, 2H, J=12.5 Hz), 1.82 (br s, 4H), 1.69 (t, 2H, J=6.3 Hz), 1.54 (br s, 2H), 1.37 (br s, 4H); ESMS m/e: 391.3 (M+H) +; Anal. Calc. for C25H30N2O2+0.2H2O: C, 76.19; H, 7.77; N, 7.11. Found: C, 76.14; H, 7.38; N, 7.13.

The synthetic route of 24566-79-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Borowsky, Beth; Blackburn, Thomas P.; Ogozalek, Kristine; US2003/82623; (2003); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 20870-79-5, name is 5-Nitroindolin-2-one, molecular formula is C8H6N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: indolines-derivatives

Step 2 5-Amino-1,3-dihydro-indol-2-one 5-Nitro-1,3-dihydro-indol-2-one 30b (3.56 g, 20 mmol) was dissolved in 200 ml of acetic acid under stirring, and added with palladium on activated carbon (1.0 g, 5%) to the solution at room temperature. The reaction mixture was stirred under a hydrogen atmosphere. After thin lay chromatography showed the disappearance of starting materials, the reaction mixture was filtered, and concentrated under reduced pressure to obtain the title compound 5-amino-1,3-dihydro-indol-2-one 30c (2.04 g, yield 68.9%) as a white solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 20870-79-5, its application will become more common.

Reference:
Patent; ChoTang, Peng Cho; Su, Yidong; Li, Yali; Zhang, Lei; Zhao, Fuqiang; Yang, Jialiang; Zhou, Ying; Bie, Pingyan; Qian, Guangtao; Ju, Minggang; US2010/75952; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 480-91-1, These common heterocyclic compound, 480-91-1, name is Isoindolin-1-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 2B:; [00193] Potassium nitrate (1.215 g, 12.02 mmol) was added portionwise to a solution of Intermediate 2A (1.6 g, 12.02 mmol) in sulfuric acid (24 mL) at 0 0C over 10 min. The reaction mixture was stirred for 3 h at ambient temperature. The reaction mixture was poured onto ice and the resulting precipitate was washed with water and dried in vacuo to yield Intermediate 2B (1.85 g, 10.38 mmol, 86 % yield) as a beige solid.

The synthetic route of 480-91-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2008/79836; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem