Month: May 2021

Reference of 20870-78-4, These common heterocyclic compound, 20870-78-4, name is 5-Bromoindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of commercial available 5-bromoindoline-2-one 2b (425 mg, 2 mmol) and pyrrole 3 (636 mg, 2.4 mmol) in ethanol (4.0 mL) six drops of piperidine were added and the mixture was heated for six hours under reflux. After cooling on ice the precipitate was filtered off, washed with ethanol and dried under vacuum to give 5 (886 mg) as an orange solid in 96% yield, mp: 245-247C, HNMR (d, ppm, DMSO-d): 0.97 (t, 6H, N(CH2CH3)2); 2.43 (s, 3H, CH3); 2.44 (s, 3H, CH3); 2.50 (m, 6H, 3xCH2); 3.29 (m, 2H, NH-CH2); 6.82 (d, 1H, 7-H); 7.25 (d, 1H, 6-H); 7.42 (s, 1H, 4-H); 7.77 (s, 1H, NH-CH2); 8.10 (s, 1H, Hvinyl); 10.99 (s, 1H, NHindole); 13.62 (s, 1H, NHpyrrole); ESI-MS (ES+): m/z=461 (M+H)+

Statistics shows that 5-Bromoindolin-2-one is playing an increasingly important role. we look forward to future research findings about 20870-78-4.

Reference:
Article; Kuchar, Manuela; Oliveira, Maria Cristina; Gano, Lurdes; Santos, Isabel; Kniess, Torsten; Bioorganic and Medicinal Chemistry Letters; vol. 22; 8; (2012); p. 2850 – 2855;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 552330-86-6,Some common heterocyclic compound, 552330-86-6, name is 5-Bromoisoindolin-1-one, molecular formula is C8H6BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate No.175-Bromo-2-(2,2,2-trifluoroethvn-2,3-dihvdro-lH-isoindol-l-one5-Bromo-2,3-dihydro-lH-isoindol-l-one (100 mg, 0.47 mmol) was dissolved inDMF (4.7 mL) and stirred at 0 C. NaH (38 mg, 0.94 mmol, 60% dispersion in oil) was carefully added in two portions, and the resulting mixture was allowed to stir at 0 C for 15 minutes before 2,2,2-trifluoroethyl trifluoromethanesulfonate (110 mg, 0.47 mmol) was added. The mixture was allowed to stir at 0 C for 30 minutes before saturated aqueous NaHC03 (10 mL) was carefully added, and the mixture was extracted with EtOAc. The organic layer was washed with water, brine, dried over anhydrous MgS04, filtered, and concentrated in vacuo. The residue was purified by MPLC on silica gel (using a gradient elution of 0-20% EtOAc/hexanes). Desired fractions were identified, combined, and concentrated in vacuo to afford the title compound. LRMS (ESI) calc’d for C10H7BrF3NO [M+H]+: 294, Found: 294.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromoisoindolin-1-one, its application will become more common.

Reference:
Patent; MERCK SHARP & DOHME CORP.; BRUBAKER, Jason; DINSMORE, Christopher J.; HOFFMAN, Dawn Marie; JUNG, Joon; LIU, Duan; PETERSON, Scott; SIU, Tony; TORRES, Luis E.; ZHANG, Hongjun; WEI, Zhongyong; SHI, Feng; WO2013/40863; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 20780-72-7, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 20780-72-7 name is 4-Bromoisatin, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: A mixture of 1 (0.4 mmol), 2 (0.4 mmol), Na2CO3 (0.8 mmol) and TBHP (0.4 mmol) in DMF (4 mL) was stirred at rt for 2 h. Then, the mixture was poured into ice-water, acidified with 1 N HCl aq. (6 mL). The mixture was extracted with ethyl acetate (20 mL x 3). The combined organic layer was dried over anhydrous Na2SO4 and concentrated in vacuo. The residue was purified by silica gel flash column chromatography to give desired products.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Bromoisatin, and friends who are interested can also refer to it.

Reference:
Article; Wu, Jun; Zhang, Hui; Ding, Xiao; Tan, Xuefei; Shen, Hong C.; Chen, Jie; He, Weimin; Deng, Hongmei; Song, Liping; Cao, Weiguo; Journal of Fluorine Chemistry; vol. 220; (2019); p. 54 – 60;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 17702-83-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 17702-83-9, name is 2-(8-Bromooctyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

a) Preparation of 8-piperidinyloctylphthalimide 8-Bromooctylphthalimide (517 mg; 2.0 mmoles) and piperazine (0.40 ml; 4.0 mmoles) were dissolved in anhydrous ethyl ether (5 ml). Reaction times and process as per Example 1. 431 mg of pure product were obtained. Yield 63percent.

The synthetic route of 2-(8-Bromooctyl)isoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MEDIOLANUM FARMACEUTICI S.P.A.; EP575954; (1993); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 56341-37-8, name is 6-Chlorooxindole, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 56341-37-8, Recommanded Product: 6-Chlorooxindole

Example 37 Preparation of intermediate E/Z-3-[5-(tert-butyl-dimethyl-silanyloxy)-3,3-dimethyl-pentylidene]-6-chloro-1,3-dihydro-indol-2-one To the mixture of 6-chlorooxindole (3.3 g, 20 mmol) (Crescent) and 5-(tert-butyl-dimethyl-silanyloxy)-3,3-dimethyl-pentanal (6.5 g, 26.6 mmol) in methanol (150 mL) was added a methanolic solution (25%, Aldrich) of sodium methoxide (10 g, 46 mmol) dropwise. The reaction mixture was stirred at room temperature for 10 min. The solvent was removed, and the residue was partitioned between ethyl acetate and water. The organic layer was separated, dried over Na2SO4, and concentrated. The residue was purified by chromatography (25-33% EtOAc in hexanes) to give E/Z-3-[5-(tert-butyl-dimethyl-silanyloxy)-3,3-dimethyl-pentylidene]-6-chloro-1,3-dihydro-indol-2-one as a off white solid (Yield 3.6 g, 46%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Chlorooxindole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Liu, Jin-Jun; Zhang, Jing; Zhang, Zhuming; US2011/201635; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 18711-13-2, name is 4,7-Dichloroindoline-2,3-dione, molecular formula is C8H3Cl2NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 4,7-Dichloroindoline-2,3-dione

General procedure: A mixture of isatin derivative (1.0 mmol), trans-4-hydroxy-L-proline (0.131 g,1 mmol), and CTAB (4 mmol) in water (50mL) was stirred at 80 C for 30 min. After completion of the reaction (monitored by TLC), the contents were filtered and the residue was washed thoroughly with water until free from CTAB. Finally, the residue was crystallized from a chloroform-petroleum ether mixture to afford the desired products in excellent yields. The characterizations of the products were accomplished by spectroscopic analysis (1H, 13C NMR, FTIR, and ESI-mass) and also by comparison of the data reported in the literature.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 18711-13-2, its application will become more common.

Reference:
Article; Naskar, Subhendu; Roy, Suprakash; Sarkar, Swarbhanu; Synthetic Communications; vol. 44; 11; (2014); p. 1629 – 1634;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 2913-97-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2913-97-5, name is N-(2-Oxoethyl)phthalimide belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a stirred solution of 2-(l,3-dioxoisoindolin-2-yl)acetaldehyde (product of step-3, 4.0 g, 21.15 mmol) in ethanol (40 mL), added hydroxylamine hydrochloride (2.930 g, 42.305 mmol) followed by sodium bicarbonate (3.55 g, 42.305 mmol) at room temperature and stirred at room temperature for 16 h. The solvent was stripped off, added water (50 mL) and extracted with ethyl acetate (2 x 100 mL). The combined organic layer was washed with water (100 mL) followed by brine, dried over sodium sulphate and concentrated under vacuum to get the title compound (3.2 g, 74percent) as an off white solid. LCMS: m/z 204.1 [M+H] +; NMR (300 MHz, DMSO-d6) delta 11.36 (s, 1H), 7.98 – 7.78 (m, 4H), 6.83 (t, / = 3.8 Hz, 1H), 4.39 (dd, / = 3.9, 0.9 Hz, 2H).

The synthetic route of N-(2-Oxoethyl)phthalimide has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AURIGENE DISCOVERY TECHNOLOGIES LIMITED; CHIKKANNA, Dinesh; KHAIRNAR, Vinayak; (74 pag.)WO2016/12958; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 129487-92-9, name is tert-Butyl 5-aminoindoline-1-carboxylate, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 129487-92-9, Recommanded Product: 129487-92-9

A mixture of 2-chloro-6-methylnicotinic acid (3.43 g), tert-butyl 5-AMINO-1-INDOLINECARBOXYLATE (5.15 g), 1- hydroxybenzotriazole hydrate (3.21 g) and 1- [3- (dimethylamino) PROPYL]-3-ETHYLCARBODIIMIDE (3.26 g) in N, N- dimethylformamide (30 ml) was stirred at ambient temperature overnight. The reaction mixture was poured into a mixture of ethyl acetate and water, and the organic layer was washed with brine and dried over magnesium sulfate. The solvent was evaporated in vacuo and the residue was chromatographed on silica gel eluting with ethyl acetate and n-hexane (6: 4 v/v). The eluted fractions containing the desired product were collected and evaporated in vacuo to give tert-butyl 5-{[(2- chloro-6-methyl-3-pyridinyl) carbonyl] AMINO}-1- indolinecarboxylate (6.65 g). 1H-NMR (DMSO-d6) : 8 1.51 (9H, s), 2.51 (3H, s), 3.07 (2H, T, J=8.5 Hz), 3.91 (2H, t, J=8.5 Hz), 7.37-7. 41 (2H, m), 7.52-7. 69 (2H, m), 7.92 (1H, d, J=7.6 Hz), 10.43 (1H, s)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; FUJISAWA PHARMACEUTICAL CO., LTD.; DAISO CO., LTD.; WO2004/39795; (2004); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3339-73-9, name is 3-(1,3-Dioxoisoindolin-2-yl)propanoic acid, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 3-(1,3-Dioxoisoindolin-2-yl)propanoic acid

Into a 1000-mL 4-necked round-bottom flask purged and maintained with an inert atmosphere of nitrogen, was placed a solution of 3-(l,3-dioxo-2,3-dihydro-lH-isoindol-2- yl)propanoic acid (40 g, 182.49 mmol, 1.00 equiv) in water (250 mL). This was followed by the addition of aniline (17 g, 182.55 mmol, 1.00 equiv). To this was added sodium carbonate (9.6 g, 90.57 mmol, 0.50 equiv). The resulting solution was stirred for 3 h at 25 C. The pH value of the solution was adjusted to 5-6 with hydrochloric acid (1 mol/L). The solids were collected by filtration. The filter cake was washed with 1×200 mL of water. This resulted in 40 g (74%) of 3-(l,3-dioxo- 2,3-dihydro-lH-isoindol-2-yl)-N-phenylpropanamide as a white solid. MS (ESI) m/z 295 ([M + H]+)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3339-73-9.

Reference:
Patent; REXAHN PHARMACEUTICALS, INC.; LEE, Young Bok; KIM, Jae Min; KIM, Deog Joong; AHN, Chang-Ho; WO2014/143960; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 132898-96-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 132898-96-5 name is 2,3-Dioxoindoline-5-sulfonyl chloride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Step 1: 5-{[(2R)-2-(Methoxymethyl)pyrrolidin-1-yl]sulfonyl}-1H-indole-2,3-dione To a stirred cold suspension of 2,3-dioxo-2,3-dihydro-1H-indol-5-sulfonyl chloride (5.00 g, 20.4 mmol) in a 1:1 mixture of THF: CHCl3 (140 mL) was added dropwise, via syringe pump, a solution of N,N-diisopropylethylamine (7.11 mL, 40.8 mmol, 2 eq) and (R)-2-(Methoxymethyl)pyrrolidine (3.27 mL, 26.5 mmol, 1.3 eq) in CHCl3 (60 mL) over a period of 1.5 hours with cooling in an ice bath. After stirring an additional 1 h, the reaction was concentrated. The crude product was purified on Biotage KP silica gel eluding with 95/5 CH2Cl2/CH3OH followed by a second chromatography on silica gel eluding with EtOAc to give 4.21 g (63.8%) of the title compound. NMR (400 MHz, DMSO-d6): consistent.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,3-Dioxoindoline-5-sulfonyl chloride, and friends who are interested can also refer to it.

Reference:
Patent; Wyeth; US2005/250798; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem