Month: May 2021

Some common heterocyclic compound, 20870-79-5, name is 5-Nitroindolin-2-one, molecular formula is C8H6N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 5-Nitroindolin-2-one

A. A suspension of 5-nitroindolin-2-one (2.0 g, 11.13 mmol), and 10% palladium on carbon (500 mg) in methanol (100 mL) was hydrogenated for 2 hours under 45 psi. The reaction mixture was filtered through celite and the resulting cake was washed with methanol. The filtrate was concentrated to afford 5-aminoindolin-2-one as a tan-colored solid (1.6 g).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 20870-79-5, its application will become more common.

Reference:
Patent; Schering Aktiengesellschaft; US2005/90541; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

99365-40-9, name is 6-Bromoindolin-2-one, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 6-Bromoindolin-2-one

NaHC03 (23 g, 283 mmol, 2.0 eq) and di-tert-butyl dicarbonate (46 mL, 212 mmol, 1.5 eq) were added to a stirred solution of 6-bromoindolin-2-one (30 g, 141.5 mmol, 1.0 eq) in THF (300 mL) at rt. The mixture was refluxed for 3 h, then cooled to rt, diluted with water (100 mL) and extracted with EtOAc (2x 100 mL). The combined organic layers were washed with brine (50 mL), dried and evaporated under reduced pressure. The raw product was purified by column chromatography [silica gel 100-200 mesh, PE/EtOAc = 9:1]. White solid. Yield: 35 g, (79%). 1H NMR (400 MHz, CDCI3, delta ppm): 8.03 (d, J = 1.2 Hz, 1H), 7.27 (dd, J = 8.0, 1.6 Hz, 1H), 7.12 (d, J = 8.0 Hz, 1H), 3.58 (s, 2H), 1.64 (s, 9H).

The synthetic route of 99365-40-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GRUeNENTHAL GMBH; KONETZKI, Ingo; JAKOB, Florian; WAGENER, Markus; WELBERS, Andre; HESSLINGER, Christian; (168 pag.)WO2017/108204; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 6341-92-0, name is 6-Chloroisatin, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C8H4ClNO2

Example 109 2-(6-Chloro-2,3-dioxo-2,3-dihydro-indol-1-yl)-4-methyl-pentanoic acid thiazol-2-ylamide A mixture of sodium hydride (60% in oil, 264 mg) in N,N-dimethylformamide at 0 C. was treated with a solution of 6-chloro-1H-indole-2,3-dione (1.0 g) in N,N-dimethyl formamide (total volume is 25 mL). The reaction mixture was then stirred for 30 min at 0 C. After this time, the reaction mixture was treated with 2-bromo-4-methyl-pentanoic acid methyl ester (prepared as in Example 9, 1.38 g) and stirred for another 1 h at 0 C. The reaction mixture was then allowed to warm to room temperature and stirred for 3 h. After this time, the reaction was diluted with water and extracted with methylene chloride. The organic layers were combined and then dried over sodium sulfate, filtered to remove the drying agent and the filterate concentrated in vacuo. The residue obtained was then purified by silica gel column chromatography to afford 2-(6-chloro-2,3-dioxo-2,3-dihydro-indol-1-yl)-4-methyl-pentanoic acid methyl ester (1.3 g, 76%).

The synthetic route of 6-Chloroisatin has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Kester, Robert Francis; US2012/142705; (2012); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 100510-65-4, name is 6-Amino-3,3-dimethylindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 100510-65-4, name: 6-Amino-3,3-dimethylindolin-2-one

Example No.11: 6-(4-(Cyclopropylamino)furo[3,2-i/|pyrimidin-2-ylamino)-3,3- dimethylindolin-2-oneTo a flask was added 2-chloro-A^-cyclopropylfuro[3,2-i/]pyrimidin-4-amine (0.45 g, 2.14 mmol, Example No.3, Step C), 6-amino-3,3-dimethylindolin-2-one (0.378 g, 2.14 mmol, Astatech), K2C03 (0.89 g, 6.44 mmol) and i-AmOH (5 mL). To the mixture was added Pd2dba3 (0.1 18 g, 0.129 mmol) and X-Phos (0.123 g, 0.258 mmol). The mixture was heated to about 100 C and stirred for about 15 h. The mixture was filtered and the filtrate was directly purified by column chromatography eluting with 0 to 70% of 10% MeOH/DCM (containing 2M 1.5% NH3 in EtOH) and DCM (25 g silica gel)). The material was then dried in a vacuum oven at about 65 C for about 48 h. The solid was then suspended in Et20 (5 mL), sonicated for 2 min and filtered. The solid was dried in a vacuum oven at about 80 C for about 16 h to give 6-(4- (cyclopropylamino)furo[3,2-ii|pyrimidin-2-ylamino)-3,3-dimethylindolin-2-one (0.195 g, 26%o): LC/MS (Table 2, Method c) R, = 1.81 min.; MS m/z: 350 (M+H)+. Syk IC50 = A

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Amino-3,3-dimethylindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ABBOTT LABORATORIES; CALDERWOOD, David, J.; WILSON, Noel, S.; COX, Philip; HOEMANN, Michael, Z.; CLAPHAM, Bruce; MULLEN, Kelly, D.; VASUDEVAN, Anil; VILLAMIL, Clara I; LI, Bin; SOMAL, Gagandeep; WO2012/48222; (2012); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 102359-00-2, A common heterocyclic compound, 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, molecular formula is C9H7NO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Compound 7 (2.1 g, 0.012 mol) and HBTU (5.0 g, 0.013 mol) were dissolved in dry DMF, in a 250 ml round bottom flask. DIPEA (6.5 ml, 0.037 mol) was added and the reaction mixtures were stirred for 30 min. L or D- phenylalanine methyl ester hydrochloride (3.0 g, 0.014 mol) or glutamic acid dimethyl ester hydrochloride (3.0 g 0.014 mol) was added and the reaction mixture was kept stirring overnight under ambient conditions. Reaction monitoring by TLC was performed on silica gel plates using CHCl3:MeOH 9:1 as eluent. Saturated NaHCO3 solution (150 ml) was added to the mixture and the precipitate was filtered, washed with saturated NaHCO3 solution and water. The crude product was purified by column chromatography CHCl3:MeOH (95:5) to give the product as white to off-white solid.

The synthetic route of 102359-00-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Nemes, Zoltan; Takacs-Novak, Krisztina; Voelgyi, Gergely; Valko, Klara; Beni, Szabolcs; Horvath, Zoltan; Szokol, Balint; Breza, Nora; Dobos, Judit; Szantai-Kis, Csaba; Illyes, Eszter; Boros, Sandor; Kok, Robbert Jan; ?rfi, Laszlo; Bioorganic and Medicinal Chemistry Letters; vol. 28; 14; (2018); p. 2391 – 2398;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 239463-85-5, name is (R)-3-(5-(2-Aminopropyl)-7-cyanoindolin-1-yl)propyl benzoate (2R,3R)-2,3-dihydroxysuccinate belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C26H31N3O8

General procedure: 3- {5- (2R) -2-aminopropyl} -7-cyano-2,3-dihydro-1H-indol-1-yl}Propyl benzoate(2R, 3R) -mono-tartaric acid salt(Mono-tartaric acid salt of the compound of formula (II)),Potassium carbonate (80 g),And a mixed solvent of acetonitrile and dimethylacetamide (ACN / DMAC = 500 mL / 500 mL) was heated to 80 DEG C,Stir for 30 min. To the reaction mixture were added 70 g of 2- [2- (2,2,2-trifluoroethoxy) phenoxy] ethyl methanesulfonate (compound of formula 3) and 9.70 g of KI,The reaction was carried out at the same temperature for 10 hours.The reaction mixture was cooled to room temperature,And extracted with 1 L of ethyl acetate and 1.5 L of water.The organic layer obtained by layer separation was washed with 1 L of brine,After drying over 40 g of anhydrous MgSO4 for 30 minutes,After washing again with 200 mL of ethyl acetate, the solvent was removed by distillation. 400 mL of methanol, 100 mL of water and 20 g of KOH were added to the obtained residue. After the mixture was stirred at room temperature for 10 hours,1 L of ethyl acetate and 1 L of water were added and extracted for 10 minutes.The organic layer obtained by layer separation was washed sequentially with 1 L of saturated aqueous solution and 1 L of saturated brine,After drying over 40 g of anhydrous MgSO4 for 30 minutes,After washing with 200 mL of ethyl acetate,18 g of oxalic acid was added.The reaction mixture was stirred at 50 for 30 minutes, It cooled to room temperature.600 mL of isopropyl ether was added to the reaction mixture,Stirred for 2 hours, and then filtered.The obtained crystals were washed with 200 mL of isopropyl ether,At 40 for 10 hours to give the titled compound as a dried in vacuo to 88 g.The reaction was carried out in the same manner as in Example 1, except that 23 g of succinic acid was used instead of oxalic acid to obtain 92 g of tabular compound.Yield: 82%Purity: 99.5%Impurities (dimer): Not more than 0.1%

The synthetic route of 239463-85-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Dasan Medichem Co., Ltd.; Ryu, Hyung Sun; Sin, Dong Kyun; Kim, Sung Ho; Ahn, Jin Woo; Kim, Jae Hyung; Aum, Woon Yong; (12 pag.)KR2016/92976; (2016); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 7699-18-5,Some common heterocyclic compound, 7699-18-5, name is 5-Methoxyindolin-2-one, molecular formula is C9H9NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 4.4.18 (Z)-5-methoxy-3-((2-(3,4,5-trimethoxyphenyl)-1H-benzo[d]imidazol-6-yl)methylene)indolin-2-one (5r) Compound 5r was prepared according to the method described for compound 5a, employing aldehyde 11e (156 mg, 0.5 mmol) and 5-methoxyindolin-2-one (12b, 81 mg, 0.5 mmol) to obtain the pure product 5r as a yellow solid (134 mg, 59%); mp: 168-166 C; IR (KBr): 3425, 3174, 2354, 1690, 1640, 1575, 1488, 1435, 1280, 1120, 1032, 992, 846, 742 cm-1; 1H NMR (300 MHz, DMSO-d6): delta 10.34 (bs, 1H), 7.89 (s, 1H), 7.77 (s, 1H), 7.66 (d, J = 8.1 Hz, 1H), 7.58 (s, 1H), 7.54 (s, 2H), 7.36 (s, 1H), 6.89-6.66 (m, 2H), 3.92 (s, 6H), 3.76 (s, 3H), 3.62 (s, 3H); 13C NMR (75 MHz, CDCl3 + DMSO-d6): delta 168.9, 153.7, 153.0, 139.0, 137.3, 136.3, 128.2, 127.7, 126.2, 124.8, 121.9, 114.2, 113.8, 111.2, 111.1, 110.0, 108.9, 108.5, 103.8, 59.9, 55.8, 55.0; MS (ESI): m/z 458 [M + H]+; HRMS (ESI) calcd for C26H24O5N3 m/z 458.16992 [M + H]+; found 458.17105.

The synthetic route of 7699-18-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Kamal, Ahmed; Nagaseshadri; Nayak, V. Lakshma; Srinivasulu, Vunnam; Sathish, Manda; Kapure, Jeevak Sopanrao; Suresh Reddy; Bioorganic Chemistry; vol. 63; (2015); p. 72 – 84;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 552330-86-6,Some common heterocyclic compound, 552330-86-6, name is 5-Bromoisoindolin-1-one, molecular formula is C8H6BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Bromoisoindolin-1-one (2.0 g, 9.43 mmol) was dissolved with warming in DMF (150 mL),then cooled to 0¡ãC. NaH (415 mg, 10.4 mmol) was added and the mixture stirred under N2 at 0¡ãC for 0.5 h. Methyl iodide (0.65 mL, 10.4 mmol) was added dropwise and the reaction allowed to warm to room temperature and stir for another I h. A small quantity of water was added to quench the reaction then the DMF removed under reduced pressure to give an oily yellow residue which was dissolved in EtOAc (150 mL). This solution waswashed with water (3×100 mL), brine (100 mL) and dried (Na2SO4)., Removal of the solvent under reduced pressure gave a solid which was purified by filtration through a plug of silica gel (10percent acetone/CH2C12 as eluant). The title compound was isolated as a very pale yellow crystalline solid (1.64 g, 80percent). ? H NMR [400 MHz, (CD3)2S0] oe 7.85 (dd, J= 1.5, 0.6 Hz, 1 H), 7.66 (dd, J= 8.0, 1.7 Hz, 1 H), 7.59 (d, J? 8.0 Hz, I H), 4.46 (s,2 H), 3.05 (s, 3 H). LRMS (APCI) calcd for C9H8BrNO 226, 228 (MH), found 226, 228.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromoisoindolin-1-one, its application will become more common.

Reference:
Patent; PETER MACCALLUM CANCER INSTITUTE; SPICER, Julie Ann; DENNY, William Alexander; MILLER, Christian Karl; O’CONNOR, Patrick David; HUTTUNEN, Kristiina; TRAPANI, Joseph A.; HILL, Geoff; ALEXANDER, Kylie; WO2014/28968; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

24566-79-8, name is N-(6-Bromohexyl)phthalimide, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Formula: C14H16BrNO2

General procedure: To a mixture of the corresponding R1R2NH (3.0 mmol), anhydrous K2CO3 (449 mg, 3.25 mmol) and KI (20.75 mg, 0.125 mmol) in CH3CN (12 ml) were added the appropriate intermediates 6-9 (2.5mmol). The reaction mixture was warmed to 60-65 C and stirred for 6-8 h under an argon atmosphere. After complete reaction, the solvent was evaporated under reduced pressure. Then water (25 mL) was added to the residue and the mixture was extracted with dichloromethane (25 mL¡Á3). The combined organic phases were washed with saturated aqueous sodium chloride (30 mL), dried over sodium sulfate, and filtered. The solvent was evaporated to dryness under reduced pressure. The residue was purified on a silica gel chromatography using mixtures of petroleum ether/EtOAc as eluent, obtaining the corresponding intermediates 10-13a-d.

The synthetic route of 24566-79-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Li, Yuxing; Qiang, Xiaoming; Li, Yan; Yang, Xia; Luo, Li; Xiao, Ganyuan; Cao, Zhongcheng; Tan, Zhenghuai; Deng, Yong; Bioorganic and Medicinal Chemistry Letters; vol. 26; 8; (2016); p. 2035 – 2039;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 19155-24-9, name is 3,3-Dimethylindolin-2-one, molecular formula is C10H11NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 19155-24-9

Step 4:3,3-dimethyl-2,3-dihydro-1H-indoleUnder a nitrogen atmosphere a solution of 6.20 mL (6.20 mmol) of a 1M solution lithium aluminium hydride in THF and 10 mL THF was slowly added dropwise to 1.00 g (6.20 mmol) 3,3-dimethyl-1,3-dihydro-indol-2-one in 50 mL THF.Then the reaction mixture was heated to 60¡ã C. for 1 h.After cooling to 0¡ã C., 3 mL ice water were slowly added dropwise.20 g sodium sulphate were added and the mixture was suction filtered.The solution was evaporated down i. vac.Yield: 0.80 g (88percent of theory)ESI-MS: m/z=148 (M+H)+

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 19155-24-9, its application will become more common.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; US2011/195954; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem