Month: May 2021

Synthetic Route of 16800-68-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16800-68-3, name is 1-Acetylindolin-3-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of 1a (35 mg, 0.2 mmol) and 2a (52.4 mg,0.4 mmol) in DCE (3 mL) was added iodine (10 mg, 0.04 mmol). The reaction mixture was heated at 80 C for 24 h, then cooled to room temperature and quenched with saturated sodium thiosulfate. The mixture was extracted with CH2Cl2, the combined organic layer was dried over Na2SO4 and concentrated under reduced pressure. The crude product was purified by flash column chromatography on silica gel to afford title compound.

The synthetic route of 1-Acetylindolin-3-one has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 106352-01-6, name is 3-((1,3-Dioxoisoindolin-2-yl)methyl)benzoic acid, A new synthetic method of this compound is introduced below., Application In Synthesis of 3-((1,3-Dioxoisoindolin-2-yl)methyl)benzoic acid

To 3-(1 ,3-Dioxo-1,3-dihydro-isoindol-2-ylmethyl)-benzoic acid (300 mg, 1.066 mmol) in DCM (1 mL9 are added at O0C triethylamine (164 uL, 1.173 mmol) and ethylchloroformate (112 uL, 1.173 mmol). After stirring at O0C during 15 min and filtration, the obtained solution is added at 0C to NaBH4 (61 mg, 1.599 mmol) in water (400 uL) before stirring at 00C during 30 min and at rt during 2h. The solution is acidified to pH 3 with an aqueous 1N HCI solution, extracted with ethylacetate, the organic phase is dried and evaporated to give a crude compound before purification by flash chromatography on silica gel (eluent: cyclohexane/ethyl acetate 9/1 to 1/1) to yield a colorless gum. TLC, Rf (cyclohexane/ethyl acetate 1/1) = 0.15.

The synthetic route of 106352-01-6 has been constantly updated, and we look forward to future research findings.

Related Products of 120266-80-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 120266-80-0, name is 5-Aminoindolin-2-one hydrochloride belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

5-lsothiocyanato-1 ,3-dihydro-indol-2-oneTo a stirring solution of 5-amino- ,3-dihydro-indol-2-one hydrochloride (2 g, 10.83 mmol) and diisopropylethylamine (4.19 g, 32.49 mmol) in drydichloromethane (100 ml) at 0 C under N2, thiophosgene (1.49 g, 10.83 mmol) in dichloromethane is added dropwise and stirred for 30 minutes. The reaction mixture is quenched with water (100 ml) and the layers are separated, the organic layer is washed with water (50 ml X2) and dried over anhydrous MgS04 to get the product as brown crystalline solid (2.03 g, 99.02 %); TLC: chloroform/methanol (9.5/0.5) Rf- 0.5;1H-NMR (400 MHz, DMSO-d6): delta [ppm] 10.60 (s, 1H), 7.31 (s, 1 H), 7.25 (d, J = 7.88 Hz, 1H), 6.82 (d, J = 8.24 Hz, 1 H), 3.50 (s, 2H

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Aminoindolin-2-one hydrochloride, other downstream synthetic routes, hurry up and to see.

Adding a certain compound to certain chemical reactions, such as: 161596-47-0, name is (S)-2-(Oxiran-2-ylmethyl)isoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 161596-47-0, Recommanded Product: 161596-47-0

((S)-2-(oxiran-2-ylmethyl)isoindoline-1,3-dione (4.56g, 22.46mmol, 1.3eq.) and 4-(4-isocyanatophenyl)morpholin-3-one (3.77g, 17.29mmol) were dissolved in isoamyl acetate (70mL) respectively, and heated to 120C. Then magnesium chloride (0.12g, 1.28mmol) was added, the mixture was reacted for 4h, white solid was obtained by filtration (6.97g, yield:95.5%). ESI-MS(m/z): 422(M+H), 444(M+Na); 1HNMR(400MHz, CDCl3) delta: 3.74(m, 2H), 3.94(m, 4H), 4.10(m, 2H), 4.32(s, 2H), 4.98(m, 1H), 7.34(d, 2H), 7.56(d, 2H), 7.75(m, 2H), 7.88(m, 2H); HPLC: 98.82%

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (S)-2-(Oxiran-2-ylmethyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 84764-41-0, name is 2-(2-(2-Methyl-1,3-dioxolan-2-yl)ethyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., HPLC of Formula: C14H15NO4

20 g of 2- (2- (2-methyl-1,3-dioxolan-2-yl) ethyl) isoindoline-1,3-dione was dissolved in 200 ml Liter of methanol, and to the inside of a 4.60 grams of 98% purity of hydrazine hydrate. The reaction was stirred for 12 hours under reflux. reaction After the end of the reaction, the reaction system was allowed to stand at room temperature and suction filtered. The filtrate was dried under reduced pressure to give crude 2- (2-methyl-1,3-Dioxolan-2-yl) ethylamine was used directly in the next step in a yield of 99%.

The synthetic route of 84764-41-0 has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 153744-36-6, name is Methyl 3-(1,3-dioxoisoindolin-2-yl)-2-hydroxypropanoate, A new synthetic method of this compound is introduced below., Formula: C12H11NO5

General procedure: tert-Butyl(2-iodoethoxy) diphenylsilane (1.4 eq) andAg2CO3 (4.0 eq) were added to a suspension of the aminoacid derivative (1.0 eq) in toluene (10.0 ml). The reactionmixture was stirred in a pressure tube at 120 C until TLCindicated complete consumption of the amino acid derivative,cooled to rt, filtered through a paper filter and reducedin vacuum. The residue was purified by flash columnchromatography on silica (eluent: pentane/Et2O 7:3).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

25369-31-7, name is 7-Nitroindolin-2-one, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Computed Properties of C8H6N2O3

To a solution of 7-nitroindolin-2-one in methanol (1.0 gm/60 ml), added Pd/C (300 mg, 30 wt %). H2 gas maintained with pressure using hydrogen gas balloon, solution stirred for 4 hours at RT. The catalyst was removed by filtration over celite. The filtrate was concentrated in vacuo to give crude product, which was washed with diethyl ether to afford compound 7-aminoindolin-2-one; YD: 76.77%; mp:248-251 C.; R1 0.6 (CHC13:MeOH:: 9.0:1.0). 1H NMR (DMSO-d6) 200 MHz, delta 3.382 (s, 2H), 4.794 (s, 2H), 6.453- 6.498 (m, 2H), 6.673 (t, J=8.0 Hz, 1H), 9.906 (s, 1H). MS (ESI): mlz 146.8 [M-H]-.

The synthetic route of 25369-31-7 has been constantly updated, and we look forward to future research findings.

Synthetic Route of 25128-35-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 25128-35-2 as follows.

Step 1: 2-amino-3-(methoxycarbonyl)benzoic acidTo a solution (0.4 M) of 2,3-dioxoindoline-7-carboxylic acid (1 eq.) in MeOH, HCl gas was bubbled and the reaction mixture was stirred at 800C for 2 h. After evaporation of the solvent, the resulting residue was diluted with CHCI3, washed with aqueous NaHC?3 (saturated solution), brine and dried. Evaporation of the solvent afforded a crude (MS (ES+) m/z 206 (M+H)+) that was dissolved in H2O2 (10%). To the resulting solution (0.2 M) was added an equal volume of aqueous NaOH (2.5% solution) and the reaction mixture was stirred at RT for 15 min. The reaction mixture was acidified with cone. HCl and the resulting precipitate was filtered off and washed with water to afford (88%) the title compound as white powder. 1H NMR (400 MHz, DMSO-ds, 300K) ? 3.82 (s, 3H), 6.60 (t, IH, J 7.4), 8.04 (m, 3H), 12.94 (bs, IH); MS (ES+) m/z 196 (M+H)+.

According to the analysis of related databases, 25128-35-2, the application of this compound in the production field has become more and more popular.

Reference of 120266-80-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 120266-80-0 name is 5-Aminoindolin-2-one hydrochloride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

5-lsothiocyanato-1,3-dihydro-indol-2-one To a stirring solution of 5-amino-1,3-dihydro-indol-2-one hydrochloride (2 g, 10.83 mmol) and diisopropylethylamine (4.19 g, 32.49 mmol) in dry dichloromethane (100 ml) at 0 C under N2, thiophosgene (1.49 g, 10.83 mmol) in dichloromethane is added dropwise and stirred for 30 minutes. The reaction mixture is quenched with water (100 ml) and the layers are separated, the organic layer is washed with water (50 ml X2) and dried over anhydrous MgSO.to get the product as brown crystalline solid (2.03 g, 99.02 %); TLC: chloroform/methanol (9.5/0.5) Rf- 0.5; H-NMR (400 MHz, DMSO-d6): delta [ppm] 10.60 (s, 1H), 7.31 (s, 1H), 7.25 (d, J = 7.88 Hz, 1H), 6.82 (d, J = 8.24 Hz, 1H), 3.50 (s, 2H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Aminoindolin-2-one hydrochloride, and friends who are interested can also refer to it.

Synthetic Route of 20870-77-3,Some common heterocyclic compound, 20870-77-3, name is 4-Chloroindolin-2-one, molecular formula is C8H6ClNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

REFERENCE EXAMPLE 30 5.5 g of 4-chlorooxindole was dissolved in 80 ml of dioxane and 6.2 g of sodium borohydride was suspended in the resulting solution. 12.7 ml of trifluoroacetic acid (d=1.48) was added thereto dropwise at room temperature while stirring. After heat-refluxing the mixture for 4.5 hours, the solvent was removed therefrom under reduced pressure. Water was added to the residue and the water-insoluble materials were removed by filtration and washed with diethyl ether. The filtrate was extracted with diethyl ether and the ether layer was dried over anhydrous sodium sulfate followed by removing the solvent. The residue was distilled under reduced pressure to obtain 3.9 g of 4-chloroindoline as a colorless oily product having a boiling point of 135 C. at 10 mm Hg.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Chloroindolin-2-one, its application will become more common.