Month: June 2021

Reference of 18711-15-4,Some common heterocyclic compound, 18711-15-4, name is 4,6-Dichloroisatin, molecular formula is C8H3Cl2NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 3 Preparation of 2-amino-4,6-dichlorobenzoic acid To a solution of 4,6-dihloro-1H-indole-2,3-dione (5.0 g, 23.1 mmol) in 75 ml of 1 N NaOH was partially added hydrogen peroxide (28% v/v, 10 ml) at room temperature. After stirring the mixture for 2 hours, an insoluble dark brown solid was removed by filtration. The filtrate was acidified with a cone, hydrochloric acid to a pH of 2. The yellow precipitate thus formed was harvested, washed with distilled water, and dried in a vacuum. Recrystallization in benzene produced the title compound as an ivory solid (3.90 g, 82%). TLC Rf=0.1 (ethylacetate: n-hexane=1:1); m.p. 188-189 C.; 1H NMR (DMSO-d6) delta 6.76 (d, 1H, J=1.9 Hz, ArH), 6.85 (d, 1H, J=1.9 Hz, ArH); MS (EI) m/e 206 [M+], 162 [M+-CO2].

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4,6-Dichloroisatin, its application will become more common.

Reference:
Patent; Korea Research Institute of Chemical Technology; US2009/203708; (2009); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 496-12-8, name is Isoindoline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C8H9N

Intermediate 5A 2-(4-bromo-3-fluorophenyl)-1-(isoindolin-2-yl)ethanone [0492] [0493] To a mixture of 2-(4-bromo-3-fluorophenyl)acetic acid (300 mg, 1.287 mmol), isoindoline (0.161 mL, 1.416 mmol), and HATU (734 mg, 1.931 mmol) in DMF (5 mL), was add DIEA (0.450 mL, 2.6 mmol). The mixture was stirred rt for 18 h. The reaction mixture was diluted with EtOAc, then was washed with H2O, 1N HCl, H2O, sat. Na2CO3 and brine. The organic phase was dried (Na2SO4), filtered through a 1? pad of SiO2 and concentrated. The crude product was purified by flash chromatography (gradient from 0 to 100% ethyl acetate/hexanes) to afford 379 mg (88%) of Intermediate 5A as an off-white solid. MS (ESI) m/z: 333.9 (M+H)+; 1H NMR (400 MHz, CDCl3) delta 7.50 (dd, J=8.0, 7.4 Hz, 1H), 7.33-7.22 (m, 4H), 7.14 (dd, J=9.2, 2.0 Hz, 1H), 7.01 (dd, J=8.5, 1.9 Hz, 1H), 4.83 (s, 4H), 3.72 (s, 2H)

The synthetic route of Isoindoline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Glunz, Peter W.; Zou, Yan; Quan, Mimi L.; US2014/206686; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3676-85-5, name is 5-Aminoisoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C8H6N2O2

EXAMPLE 8 The steps followed in the procedure of this example are illustrated diagrammatically below: STR6 Step (a), Production of 5-Aminophthalide Twenty grams of 4-aminophthalimide was added to a mixture of 41 gm zinc and 122 gm sodium hydroxide in 50 ml water (with good stirring) over 30 minutes. The mixture was stirred another 30 minutes, then heated to 60. When ammonia ceased to be evolved the mixture was heated for an additional 60 minutes, then cooled to about 30. The zinc residues were filtered off and the solution was acidified with 30 ml concentrated hydrochloric acid. The solution was heated to 90 for 45 minutes, then cooled and neutralized with 20 gm solid sodium carbonate, which brought the pH to 8-9. The product was filtered, washed with water and air dried. Wt=16.8 gm, m.p.=177-189.

The synthetic route of 3676-85-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Pennwalt Corporation; US4665181; (1987); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 59-48-3,Some common heterocyclic compound, 59-48-3, name is Indolin-2-one, molecular formula is C8H7NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

5-Bromo-2-oxindole 2-Oxindole (1.3 g) in 20 mL acetonitrile was cooled to -10 C. and 2.0 g N-bromosuccinimide was slowly added with stirring. The reaction was stirred for 1 hour at -10 C. and 2 hours at 0 C. The precipitate was collected, washed with water and dried to give 1.9 g (90% yield) of the title compound.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Indolin-2-one, its application will become more common.

Reference:
Patent; Sugen, Inc.; US6486185; (2002); B1;; ; Patent; Sugen, Inc.; US6114371; (2000); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 39603-24-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 39603-24-2, name is 5,7-Dimethylindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of 2-amino benzophenone (1 mmol), corresponding isatin or aldehyde (1 mmol) and ammonium acetate (2 mmol) in ethanol (5 mL) was stirred at room temperature. The progress of reaction was monitored by TLC. After completion of the reaction ice-cold water was added and stirred for a while. The solid product obtained was filtered and washed with water. This was further purified by crystallization from ethanol or by short column chromatographyon silica gel using ethyl acetate-petroleum ether as the eluent.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5,7-Dimethylindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Kamal, Ahmed; Babu, Korrapati Suresh; Chandrasekhar, Cheemalamarri; Nagaraju, Burri; Visweswara Sastry; Ganesh Kumar; Tetrahedron Letters; vol. 56; 46; (2015); p. 6373 – 6376;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 20870-79-5, name is 5-Nitroindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 5-Nitroindolin-2-one

The commercial 5-nitroindolin-2-one (1.00 g, 5.61 mmol) was hydrogenated in EtOH (70 mL) in the presence of 10% Pd-C (315 mg, 2.97 mmol) for 4 h. Then the catalyst was filtered off through Celite, the Celite rinsed with additional EtOH and the solution was evaporated, to give 17 as a brown solid (698 mg, 4.71 mmol, 84% yield). 1H NMR (CD3OD): delta 3.43 (s, 2H, CH2); 6.63-6.65 (m, 2H, Ar); 6.73-6.74 (m, 1H, Ar) ppm. Anal. (C8H8N2O) Calc%: C 64.85, H 5.44, N 18.91; Found%: C 65.03, H 5.49, N 18.83.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 20870-79-5.

Reference:
Article; Sestito, Simona; Nesi, Giulia; Daniele, Simona; Martelli, Alma; Digiacomo, Maria; Borghini, Alice; Pietra, Daniele; Calderone, Vincenzo; Lapucci, Annalina; Falasca, Marco; Parrella, Paola; Notarangelo, Angelantonio; Breschi, Maria C.; Macchia, Marco; Martini, Claudia; Rapposelli, Simona; European Journal of Medicinal Chemistry; vol. 105; (2015); p. 274 – 288;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 104618-31-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 1: 4- (Phthalimido) -cyclohexanone [0034] 4- (Phthalimido) -cyclohexanol (146 g) was mixed with AcOEt (1000 mL) , after which and NaBr (8 g) and TEMPO(0.5 g) was added. 1000 mL of NaClO (10 %) was added in portions and the reaction mixture was adjusted using NaHCtheta3 to pH 7- 8 to maintain the temperature between 5 and 20 0C. After the reaction was completed, the aqueous layer was separated and the organic layer was washed with brine (400 mL) and dried over Na2SO4. The solvent was removed under reduced pressure to give the product as white solid (95 % yield) .

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; CHIRAL QUEST, INC.; WEI, Yuan; LI, Tianqiao; CHI, Yongxiang; ZHU, Jingyang; WO2010/78250; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 56341-37-8, name is 6-Chlorooxindole, molecular formula is C8H6ClNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C8H6ClNO

Step 1: 3,3-Dibromo-6-chloro-1,3-dihydro-indol-2-one At room temperature, to a solution of 6-chlorooxindole (10.0 g, 59.7 mmol) in t-BuOH (500 mL) and water (2.6 mL) was added pyridinium tribromide (57.25 g, 79 mmol, 3 eq) and the reaction was stirred for 3.5 hr. The reaction was diluted with water (500 mL) and extracted with EtOAc (3*). The combined organic extracts were washed with sat. aq. NaHCO3 (3*), dried over MgSO4, filtered and concentrated to give the title compound as a tan solid (19.66 g, 100% yield). NMR (400 MHz, DMSO-d6): consistent. MS: (API-ES+) m/z 325[M+H].

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 56341-37-8, its application will become more common.

Reference:
Patent; Wyeth; US2005/250798; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 2436-29-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2436-29-5 as follows.

A solution of N-chloro-3-phenylaniline (1.00 g, 4.91 mmol) in ethylene dichloride (10.0 mL) was cooled to 0 C and treated with 3-(1,3-dioxoisoindolin-2-yl)propanal (1.05 g, 5.15 mmol) and sodium triacetoxyborohydride (1.46 g, 6.87 mmol). The mixture was warmed to 25 C and stirred for 24 h. The mixture was treated with a solution of 1 M aqueous NaOH (2.0 mL), stirred for 0.5 h, then partitioned between between saturated aqueous NaCl (100 mL), and CH2Cl2 (100 mL). The organic layer was washed with saturated aqueous NaCl (3 100 mL), dried (Na2SO4), and concentrated in vacuo. The residue was dissolved in a minimal amount of CH2Cl2 and purified by flash chromatography (SiO2, 0-10% ethyl acetate-hexanes) to afford the title compound as a yellow oil (0.847 g, 44%). 1H NMR (600 MHz, CDCl3) 7.84 (2H, dd, J = 5.4, 3.1 Hz), 7.72 (2H, dd, J = 5.5, 3.0 Hz), 7.32 (2H, t, J = 7.9 Hz), 7.07-7.12 (4H, m), 6.78 (2H, m), 6.71 (1H, m), 3.78 (4H, m), 2.06 (2H, quintet, J = 7.5 Hz); 13C NMR (150 MHz, CDCl3) 168.5, 149.5, 146.9, 135.1, 134.2, 132.2, 130.3, 129.9, 124.5, 124.1, 123.5, 119.8, 118.0, 116.2, 50.1, 36.1, 27.0; LCMS m/z 391.1 ([M + H+], C23H19ClN2O2 requires 391.1).

According to the analysis of related databases, 2436-29-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Kastrinsky, David B.; Sangodkar, Jaya; Zaware, Nilesh; Izadmehr, Sudeh; Dhawan, Neil S.; Narla, Goutham; Ohlmeyer, Michael; Bioorganic and Medicinal Chemistry; vol. 23; 19; (2015); p. 6528 – 6534;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 71294-03-6,Some common heterocyclic compound, 71294-03-6, name is 7-Fluoroindolin-2-one, molecular formula is C8H6FNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 5: 7-Fluoro-1,3-dihydro-indol-2-one (7.3 g, 48 mmol) and lithium chloride (6.67 g, 158 mmol) were dissolved in tetrahydrofuran (200 mL). The solution was cooled to -78 C. and n-butyllithium (40 mL, 100 mmol) was added slowly over a 15 minute period. After 20 minutes at -78 C., methyl iodide (6 mL, 96 mmol) was added and the mixture allowed to warm to room temperature. After 24 hours, the mixture was poured into water and extracted with ethyl acetate. The organic layer was dried over anhydrous magnesium sulfate, and concentrated in vacuo. The crude product was purified via Biotage chromatography (Flash40i, silica, 10% then 20% ethyl acetate/hexane) gave 4.1 g (48%) 7-fluoro-3,3-dimethyl-1,3-dihydro-2H-indol-2-one. MS (ESI) m/z 180, ([M+H]+).

The synthetic route of 71294-03-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Wyeth; US2008/153873; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem