Month: July 2021

Adding a certain compound to certain chemical reactions, such as: 5428-09-1, name is 2-Allylisoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 5428-09-1, Safety of 2-Allylisoindoline-1,3-dione

General procedure: An oven-dried, two-necked round-bottom flask containing a stir bar was charged with an aryl bromide 1 (1.0 mmol), Pd(OAc)2 (6.8 mg, 0.03 mmol), K2CO3 (165.9 mg, 1.2 mmol), HQ (15.6 mg, 0.1 mmol), allylamine (1.2 mmol), and DMF (3.0 ml) under nitrogen at room temperature. Following degassing three times, the flask was placed in an oil bath, and the mixture was stirred and heated at the appropriate temperature. After an appropriate reaction time, the flask was removed from the oil bath and cooled to room temperature. Water (20 ml) was added, and the mixture was extracted with CH2Cl2 (3×20 ml). The combined organic layer was washed with brine, dried (Na2SO4), filtered, and concentrated in vacuo. The product was purified by flash column chromatography on silica gel using ethyl acetate/hexane as an eluent.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Jiang, Zhen; Zhang, Lingjuan; Dong, Chaonan; Ma, Baode; Tang, Weijun; Xu, Lijin; Fan, Qinghua; Xiao, Jianliang; Tetrahedron; vol. 68; 24; (2012); p. 4919 – 4926;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 32692-19-6, name is 5-Nitroindoline, A new synthetic method of this compound is introduced below., Formula: C8H8N2O2

1-{1-[6-(5-nitro-2,3-dihydro-indole-1-carbonyl)-pyrimidin-4-yl]-piperidin-4-yl}-1,3-dihydro-imidazo[4,5-b]pyridin-2-one 150 mg (0.47 mmol) TBTU were added to 150 mg (0.44 mmol) 6-[4-(2-oxo-2,3-dihydro-imidazo[4,5-b]pyridin-1-yl)-piperidin-1-yl]-pyrimidine-4-carboxylic acid, 75 mg (0.46 mmol) 5-nitro-2,3-dihydro-1H-indole, 100 muL and (0.712 mmol) triethylamine in 1.5 mL DMF and the mixture was stirred overnight at RT. The reaction mixture was poured onto 30 mL water. The precipitated product was suction filtered and dried at 50 C. in the CAD. Yield: 130 mg (61% of theoretical) ESI-MS: m/z=487 (M+H)+

The synthetic route of 32692-19-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; US2011/195954; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41663-84-7, name is 2-Methyl-5-nitroisoindoline-1,3-dione, A new synthetic method of this compound is introduced below., Computed Properties of C9H6N2O4

Example 12Conversion of Treated 4NPI to BisimideA 2-liter, 5-necked oil jacketed glass vessel, equipped with a Dean and Stark receiver topped with a reflux condenser, a mechanical stirrer, and means for maintaining a nitrogen atmosphere, was charged with 335 g (1.63 mol) of 4-NPI in 1000 g of toluene (resulting from the bicarbonate treatment of the 4NPI/water slurry, see above), and 6.2 g (0.008 mol HEG-Cl) of a catalyst solution composed of 34.4% by wt. HEG-Cl, 10.0% sodium chloride, and 55.6% water. An additional 500 g of toluene was added. The solution was brought to reflux using an external hot oil unit set at 120 C. to supply hot oil to the jacket of the vessel, and the water was removed by azeotropic distillation. Approximately 500 g of toluene was removed during the distillation. The dry 4-NPI/catalyst toluene solution was then added via a flexible fitting to a 5-liter, 5-necked oil jacketed glass vessel (equipped with a Dean and Stark Receiver topped with a reflux condenser, mechanical stirrer, and means for maintaining a nitrogen atmosphere) containing 222 g (8.15 mol) of BPA disodium salt and 700 g of toluene (the salt solution can also be added to the NPI solution). The temperature on the 5-liter vessel was maintained at 120 C. using a hot oil recirculating unit. HPLC of the reaction mixture indicated that the displacement reaction was complete in 60 min. to afford a 99.4% yield of BPA bisimide. The mixture was cooled to 80 C. and extractively purified with three 580 mL portions of 1% aqueous sodium hydroxide to afford pure bisimide with a yellowness index (YI) of 2.0.The YI was measured with a Macbeth 7000 spectrometer using ASTM D-1925. A blank of methylene chloride was measured for YI prior to measurement of the sample. This YIblank measurement was recorded for use in correcting the final measurement. About 0.5 g of a sample was dissolved into 10 mL of methylene chloride. The sample was then filtered through a 0.5 g HPLC filter. The mixture was then transferred to a 3.7 cm×5 cm×10 mm path length cell. The cell was placed into the calorimeter (ASTM D11925) and the YI was determined.The equation (I) below was used to correct the YI. This equation (I) is general and allows for solutions to also be measured for YI.YIcor=(YImeas-YIblank)*0.5*100/(wt. Sample in G*% solids of the sample) (I) The washes were done at 80 C., with a 5 minute agitation time and a 7 minute settling time. The YI of the material was 2.2. The YI of a typical reaction (without bicarbonate treatment of the 4NPI/water slurry) is 3 to 4.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SABIC Innovative Plastics IP B.V.; US2009/292128; (2009); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 6872-06-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6872-06-6, name is 2-Methylindoline, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: Formyl chloride derivatives (7 mmol) was added to the solution ofvarious arylamines (7 mmol) in acetone (25 ml). After stirring at 60 Cfor 6 h, the reaction mixture was concentrated to remove acetone. Theresidue was purified by column chromatography with petroleum/ethylacetate (9:1) to afford the target compound 15-27 and 29-32.

The chemical industry reduces the impact on the environment during synthesis 2-Methylindoline. I believe this compound will play a more active role in future production and life.

Reference:
Article; Fu, Dong-Jun; Li, Miaomiao; Zhang, Sai-Yang; Li, Jiang-Feng; Sha, Beibei; Wang, Longhao; Zhang, Yan-Bing; Chen, Ping; Hu, Tao; Bioorganic Chemistry; vol. 92; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 868066-91-5,Some common heterocyclic compound, 868066-91-5, name is 5-Bromo-2-methylisoindolin-1-one, molecular formula is C9H8BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 5-bromo-2-methylisoindolin-l-one (Example 31, step (i), 60.4 g) in dioxane (2 L) was added 4,4,4′,4′,5,5,5′,5′-octamethyl-2,2′-bi(l,3,2-dioxaborolane) (67.8 g), potassium acetate (65.4 g) and Pd(dppf)Cl2 (6 g) under an atmosphere of nitrogen. The mixture was heated to 1000C and stirred for 4 h. The reaction mixture was cooled to room temperature and filtered. The filtrate was concentrated and the crude product was purified by chromatography on silica eluting with petroleum ether / ethyl acetate (6:1 to 2: 1) to afford the sub-titled compound (72 g).1H NMR (400 MHz, CDCl3): delta 7.89-7.88 (m, 2H), 7.83-7.81 (m, IH), 4.35 (s, 2H), 3.19 (s, 3H), 10.34 (s, 12H).

The synthetic route of 868066-91-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; FORD, Rhonan; METE, Antonio; MATHER, Andrew; MILLICHIP, Ian; WO2010/128324; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41910-64-9, name is 4-Chloroindoline, A new synthetic method of this compound is introduced below., Computed Properties of C8H8ClN

Step 2: (cis) (4-(4-chloroindolin- l-yl)thiazol-2-yl) (2,6-dimethylmorpholino) methanone (cis) (4-bromothiazol-2-yl) (2,6-dimethylmorpholino)methanone (step- 1 of compound 45, 1.0 g, 3.28 mmol) and 4-chloroindoline (0.55 g, 3.60 mmol) were added to seal tube containing toluene (25 ml). Sodium tert-butoxide (0.47 g, 4.91 mmol) was added, the nitrogen gas was bubbled through reaction mixture for 15 minutes and tris(dibenzylideneacetone)dipalladium(0) (0.15 g, 0.16 mmol) was added under nitrogen and the tube was sealed. The reaction mixture was heated at 100C for 18 hr under stirring. The progress of reaction was monitored by TLC. The reaction mixture was cooled to 25C and diluted with ethyl acetate (100 ml) and washed with water (25 ml). The organic layer was dried over sodium sulfate filtered and concentrated under reduced pressure to obtain a crude product; which was purified by flash column chromatography using 15% ethyl acetate in hexanes as an eluent to obtain the title compound (0.75 g, 60.6%). MS: m/z 378 (M+l). iHNMR (CDCI3, 400 MHz): delta 7.52 (d, J = 8.8 Hz, 1H), 7.18-7.05 (m, 2H), 6.33 (s, 1H), 5.56 (d, J = 13.2 Hz, 1H), 4.56 (d, J = 13.2 Hz, 1H), 3.99 (t, J = 8.8 Hz, 2H), 3.82-3.66 (m, 2H), 3.24 (t, J = 8.8 Hz, 2H), 3.10 (t, J = 12.8 Hz, 1H), 2.63 (t, J = 12.8 Hz, 1H), 1.41- 1.22 (m, 6H).

The synthetic route of 41910-64-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; LUPIN LIMITED; SINHA, Neelima; KARCHE, Navnath, Popat; HAJARE, Anil, Kashiram; ADURKAR, Shridhar, Keshav; LAIRIKYENGBAM, Bikramjit, Singh; RAJE, Firoj, Aftab; TILEKAR, Ajay, Ramchandra; THUBE, Baban, Rupaji; PALLE, Venkata P.; KAMBOJ, Rajender, Kumar; WO2013/132380; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 199328-10-4, The chemical industry reduces the impact on the environment during synthesis 199328-10-4, name is Methyl Oxindole-5-carboxylate, I believe this compound will play a more active role in future production and life.

Into a 50-mL round-bottom flask was placed methyl 2-oxo-2,3-dihydro-1H- indole-5-carboxylate (800 mg, 4.18 mmol, 1.00 equiv) and methanol (10 mL). This was followed by the addition of a solution of NaOH (670 mg, 16.75 mmol, 4.00 equiv) in water (10 mL) dropwise with stirring at 0oC. The resulting solution was stirred for 14 h at 20oC. The mixture was then concentrated under vacuum and the residue taken up in 20 mL of H2O. This was washed with 2×5 mL of dichloromethane. The pH was adjusted to 4 with hydrochloric acid (1 N) and extracted with 5×50 mL of ethyl acetate and the organic layers combined. Concentration resulted in 592 mg (80%) of 2-oxo-2,3-dihydro- 1H-indole-5-carboxylic acid as a yellow solid

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl Oxindole-5-carboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Epizyme, Inc.; Poley, Megan Allen Clunan; Kunz, Kevin Wayne; Mills, James Edward John; Mitchell, Lona Helen; munckhof, Michael John; Harvey, Darren Martin; (303 pag.)KR2017/45749; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6341-92-0, name is 6-Chloroisatin, A new synthetic method of this compound is introduced below., Formula: C8H4ClNO2

General procedure: The mixture of substituted isatins 1 (1 mmol), phthalic anhydride or succinic anhydride 2 (1 mmol), 1,3-dimethylurea (1,3-diethylurea) 3 (1.5 mmol), p-TSA?H2O (0.2 mmol), and CH3CN (3 mL) was put in a 25 mL flask and reacted under 80 C (monitored by TLC) about 5 h. After completion, the reaction the mixture was cooled to room temperature and the precipitate was obtained by filtration. Compound 4 was purified by recrystallization from EtOH.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Li, Lei; Xu, Hui; Yan, Lirong; Xu, Zhongyun; Ling, Zhi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron Letters; vol. 58; 25; (2017); p. 2468 – 2474;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 954-81-4, name is N-(5-Bromopentyl)phthalimide, A new synthetic method of this compound is introduced below., Quality Control of N-(5-Bromopentyl)phthalimide

General procedure: A mixture of the intermediates 3a-3e (5 mmol) and corresponding secondary amine 4a-4g (5.5 mmol) was added in CH3CN (20 ml) at the presence of anhydrous K2CO3 (6 mmol). The mixture was heated at 65 C for 6-10 h. The solvent was evaporated in vacuo. The residue was dissolved in CH2Cl2 (25 mL), washed with water (20 mL × 3), and the combined organic phases were washed with saturated aqueous NaCl (30 mL), dried over sodium sulfate, and filtered. The solvent was evaporated under reduced pressure. The residue was purified on a silica gel chromatography using mixtures of petroleum/acetone as eluent to get the target products TM-1~TM-28.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Sang, Zhipei; Wang, Keren; Wang, Huifang; Yu, Lintao; Wang, Huijuan; Ma, Qianwen; Ye, Mengyao; Han, Xue; Liu, Wenmin; Bioorganic and Medicinal Chemistry Letters; vol. 27; 22; (2017); p. 5053 – 5059;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 7477-63-6, A common heterocyclic compound, 7477-63-6, name is 7-Chloroisatin, molecular formula is C8H4ClNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Amixture of isatin (1.0 mmol), malononitrile or its derivative (1.0mmol) and Et3N (1.0 mmol) in 3.0 mL ethanol were stirred at roomtemperature for half an hour. Then a solution of hydrazine hydrate (1.1 mmol)and dialkyl acetylenedicarboxylate (1.1 mmol) in 2.0 mL ethanol was added toit. The whole solution was stirred at room temperature for stipulated time asindicated in Table 2. The progress of the reaction was monitored by TLC. Aftercompletion of the reaction, the resulting precipitates were collected by filtration and the crudeproduct was recrystallized from the mixture of methanol and acetonitrile (7:3). In some cases the crude product were purified by columnchromatography using silica gel (60-120 mesh) and 50percent ethyl acetate in hexaneas eluent.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Pal, Suman; Khan, Md. Nasim; Karamthulla, Shaik; Abbas, Sk Jahir; Choudhury, Lokman H.; Tetrahedron Letters; vol. 54; 40; (2013); p. 5434 – 5440;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem