Month: July 2021

Electric Literature of 32692-19-6,Some common heterocyclic compound, 32692-19-6, name is 5-Nitroindoline, molecular formula is C8H8N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of silver sulfate (100 g, 0. 32 mol) and iodine (82 g, 0.32 mol) IN NN-DIMETHYLFORMAMIDE (700 mL) and ethanol (1400 mL) was treated with 5-nitro-2, 3-DIHYDRO-1H-INDOLE I (48 G, 0. 29 mol). The resulting mixture was stirred at 25C for 1.5 h, filtered and the filter pad washed with ethyl acetate. The filtrate was concentrated in vacuo to a volume of approximately 500 mL. This solution was treated with a L. oN aqueous sodium thiosulfate solution (100 mL) and a saturated aqueous sodium chloride solution (400 mL). The resulting precipitate was collected by filtration, washed with water and petroleum ether, and dried in vacuo to afford 7-IODO-5-NITRO-2, 3-DIHYDRO-1H-INDOLE II (83.9 G, 98. 9%) as a white solid: 1H NMR (DMSO-D6, 300 MHz) 8 8. 18 (d, J = 2. 20 Hz, 1H), 7. 80 (d, J = 1. 46 Hz, 1H), 7. 03 (broad s, 1H), 3.65 (t, J = 8. 97 Hz, 2H), 3. 17 (t, J = 8. 60 Hz, 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Nitroindoline, its application will become more common.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; WO2004/101568; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 6872-06-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6872-06-6, name is 2-Methylindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A 25 mL oven-dried Schlenk tube was sequentially added N-methylaniline 1 or aniline 4 (0.2 mmol), Ethyl Bromodifluoroacetate 2a (81.2 mg, 0.4 mmol), DMF (1ml) and H2O (1 mL) was added under air. The reaction mixture was stirred for 6 h at 110. The solution was then diluted with ethyl acetate (20 mL), washed with brine (10 mL), extracted with ethyl acetate (3*5 mL), dried over anhydrous Na2SO4, filtered and evaporated under vacuum. The crude reaction mixture was purified by column chromatography (silica gel, ethyl acetate/petroleum ether) yielded the desired product 3 or 5.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Methylindoline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Xu, Zhuo-Wei; Xu, Wen-Yi; Pei, Xiao-Jun; Tang, Fei; Feng, Yi-Si; Tetrahedron Letters; vol. 60; 18; (2019); p. 1254 – 1258;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 19155-24-9, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 19155-24-9 name is 3,3-Dimethylindolin-2-one, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

a 5-Chloroacetyl-3,3-dimethyl-2H-indol-2-one 10.8 g (66.4 mmoles) 3,3-dimethyl-3H-indol-2-one are slowly added (in 1 h) to a suspension of 26 7 g (200 mmoles) aluminium chloride and 15 g, that is 10.58 ml (133 mmoles) chloroacetyl chloride in 60 ml dichloromethane, then the mixture is heated under reflux for 1 h 30 min. The brown suspension obtained is slowly poured into 500 ml ice-water, the mixture is stirred for 30 min and then filtered and the solid is washed with a little ether and dried. 16.3 g of crystals are obtained, which are used as such in the following step.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,3-Dimethylindolin-2-one, and friends who are interested can also refer to it.

Reference:
Patent; Synthelabo; US5034401; (1991); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 1074-82-4, name is Potassium 1,3-dioxoisoindolin-2-ide, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1074-82-4, category: indolines-derivatives

To a stirred solution of 1,6-dibromohexane (12.3 mL, 81.0 mmol) in DMF (10 mL), was added potassium phthalate (5.0 g, 27.0 mmol) portion-wise over 30 mm at room temperature. After complete addition, the reaction mixture was stirred at 90 C for 18 h, then quenched with water (300 mL) and extracted with diethyl ether (150 mL x 2). The combined organic extracts were washed with water (100 mL x 2), followed by brine (50 mL x 2) and dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure. The resultant residue was purified by silica gel column chromatography (60-120 mesh) using 5-10% EtOAc / hexanes to afford 3-i as an off- white solid (6.3 g, 76% yield). LCMS: 310.95 (M+ 1).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Potassium 1,3-dioxoisoindolin-2-ide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; CV6 THERAPEUTICS (NI) LIMITED; SPYVEE, Mark; LEWIS, Michael; (300 pag.)WO2018/98204; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 603-62-3, name is 3-Nitrophthalimide belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 3-Nitrophthalimide

General procedure: A mixture of the appropriate thiol (6 mmol), 3-nitrophthalimide(4 mmol) and K2CO3 (10 mmol) in 20 mL acetone was heated underreflux for 24 h. The reaction was cooled to room temperature anddiluted with 150 mL water. The mixture was subsequently acidifiedto pH 2 with 6 N HCl. The resulting precipitate was collectedby filtration and dried at 50 C [19].

The synthetic route of 603-62-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Van Der Walt, Mietha M.; Terre’Blanche, Gisella; Petzer, Anel; Petzer, Jacobus P.; Bioorganic Chemistry; vol. 59; (2015); p. 117 – 123;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 3676-85-5, A common heterocyclic compound, 3676-85-5, name is 5-Aminoisoindoline-1,3-dione, molecular formula is C8H6N2O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 99 N-(1,3-Dioxo-2,3-dihydro-1H-5-isoindolyl)-N’-(2,4,6-trifluorobenzyl)urea Diphenylphosphoryl azide (198 mg, 0.72 mmol, 1.2 eq) and triethylamine (73 mg, 0.72 mmol, 1.2 eq) were added to a solution of 2,4,6-trifluorophenylacetic acid (114 mg, 0.60 mmol) in toluene, and the mixture wasstirred at 110C for 60 min. Thereafter, 4-aminophthalimide (97 mg, 0.60 mmol, 1.0 eq) and a minor amount of DMF were added thereto, and the mixture was stirred at 110C for 2.5 hr. After the completion of the reaction, water and ethyl acetate were added thereto, and the precipitated crystal was collected by filtration and was washed with ethyl acetate to give the title compound as a crystal (97 mg, 46.4%). MS m/z: 349 1H-NMR delta: 4.36 (2H, d, J = 4.64 Hz), 6.91 (1H, t, J = 5.73 Hz), 7.19 (2H, t, J = 8.66 Hz), 7.57 (1H, dd, J = 1.71, 8.05 Hz), 7.66 (1H, d, J = 8.29 Hz), 7.98 (1H, d, J = 1.71 Hz), 9.17 (1H, s), 11.08 (1H, s)

The synthetic route of 3676-85-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; KIRIN BEER KABUSHIKI KAISHA; EP1256574; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 16800-68-3 as follows. category: indolines-derivatives

General procedure: 1a (35.0 mg, 0.2 mmol, 1 equiv.), tert-BuOK (22.4 mg, 0.2 mmol, 1.0 equiv.) were added to a Schlenk tube. Then 2 ml THF was added using a syringe. The reaction mixture was stirred 15min,and then added iodonium salt 2 (0.2 mmol, 1.0 eq). The reaction was stirred at 30C for 10 hours.After cooling to room temperature, the solvent was removed in vacuo and the residue was purifiedby silica gel using a proper eluent (EtOAc/Hexane) to afford the desired products

According to the analysis of related databases, 16800-68-3, the application of this compound in the production field has become more and more popular.

Reference:
Article; Zhang, Yanxia; Han, Jianwei; Liu, Zhen-Jiang; Synlett; vol. 26; 18; (2015); p. 2593 – 2597;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 50727-04-3, name is 5-Methoxyisoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 5-Methoxyisoindoline-1,3-dione

A stirred solution of 4-methoxyphthalimide (21.3 g, 0.12 mol) in anhydrous tetrahydrofuran (425 ml) at 00C was treated dropwise with a solution of borane in tetrahydrofuran (1M, 340 ml, 0.34 mol) and the resulting mixture was stirred and held at reflux for 16 hours. The mixture was cooled to 0C, methanol (150 ml) was added dropwise followed by 5M hydrochloric acid (150 ml) and the mixture was stirred and held at reflux for 3 hours. Upon cooling to room temperature the organic solvent was removed in vacuo, the mixture was diluted with water (750 ml) and was extracted with dichloromethane (3 x 750 ml). The aqueous layer was basified to pH 12 or above by the addition of 5M sodium hydroxide, extracted with dichloromethane (3 x 750 ml) and the combined extracts were evaporated to dryness in vacuo to afford 5-methoxyisoindoline (8.34 g, 47%) as a brown oil. 1H NMR (DMSO-d6) 7.13 (1 H, d), 6.84 (1H1 d), 6.74 (1H, dd), 4.05 (2H, s), 4.01 (2H, s), 3.73 (3H, s). MS: [M+H]+ 150.

The synthetic route of 5-Methoxyisoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; WO2008/44045; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 19155-24-9, name is 3,3-Dimethylindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 19155-24-9, Product Details of 19155-24-9

3,3-Dimethyl-1,3-dihydro-indol-2-one (5.5 g, 34 mmol) was dissolved in dimethylformamide (50 mL) and sodium hydride (1.4 g, 38 mmol) was added portionwise and the mixture was stirred 30 minutes then benzyl bromide (4.8 mL, 41 mmol) was added. The mixture was stirred 2 hours then quenched with saturated aqueous ammonium chloride, diluted with ether, washed with water, and saturated brine. The organic layer was separated, dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. The crude product was purified via Isco chromatography (Redisep, silica, gradient 0-20percent ethyl acetate in hexane) to afford 7.1 g (83percent) of 1-benzyl-3,3-dimethyl-1,3-dihydro-2H-indol-2-one. HPLC purity 96.4percent at 210-370 nm, 9.5 minutes; Xterra RP18, 3.5u, 150*4.6 mm column, 1.2 mL/min, 85/15-5/95 (Ammon. Form. Buff. Ph=3.5/ACN+MeOH) for 10 minutes, hold 4 minutes. HRMS: calculated for C17H17NO+H+, 252.13829; found (ESI, [M+H]+), 252.142

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,3-Dimethylindolin-2-one, and friends who are interested can also refer to it.

Reference:
Patent; Wyeth; US2007/72928; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 3335-98-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3335-98-6, name is 1-Phenyloxindole belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: An oven-dried reflux tube equipped with a magnetic stir bar and a Teflon stopcock was charged with aryl halide (1 mmol), oxindole (1 mmol),potassium carbonate (1.1 mmol), catalyst nanoparticles (0.05 mmol)and 1,4-dioxane (2 ml) and heated at 70 C. The mixture was vigorously stirred under these reaction conditions and completion of the reaction was monitored by TLC (EtOAc: n-hexane, 25:75). After completion of the reaction, the reaction mixture was cooled to room temperature, the magnetic nanoparticles of the catalyst were collected using a magnet. Ethyl acetate (5 mL) and water (10 mL)were added to the mixture in the next step. The aqueous layer was furtherextracted by ethyl acetate (2*5 mL). The combined organic layerswere washed with saturated brine, dried over CaCl2, filtered, and concentrated to give a residue which was purified by recrystallization from ethanol and water or by column chromatography on silica gelusing EtOAc: n-hexane, 1:7.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Phenyloxindole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Moghaddam, Firouz Matloubi; Tavakoli, Ghazal; Latifi, Fatemeh; Saeednia, Borna; Catalysis Communications; vol. 75; (2016); p. 37 – 41;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem