Month: August 2021

These common heterocyclic compound, 118-29-6, name is 2-(Hydroxymethyl)isoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 2-(Hydroxymethyl)isoindoline-1,3-dione

6.1 5-Phthalimidomethyl-2,3,3-trimethylindolenine To a stirred solution of 2,3,3,-trimethylindolenine (20 g, 126 mmol) in concentrated sulphuric acid (100 ml) at ambient temperature was added portionwise N-hydroxymethylphthalimide (20 g, 114 mmol). After 70 hours the reaction mixture was poured onto ice and made basic with concentrated ammonium hydroxide. The resulting precipitate was filtered and dried. The product was obtained as a yellow solid (34.84 g, 87%).

The synthetic route of 2-(Hydroxymethyl)isoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Carnegie Mellon University; US6686145; (2004); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

3891-07-4, name is 2-(2-Hydroxyethyl)isoindoline-1,3-dione, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 3891-07-4

Into the reaction tank, put 350 kg of toluene, stirring temperature, distillation of toluene, after the liquid in the water separator is filled, keep the reflux water for 60 minutes, and take a sample to measure the water, when the water content of the reflux liquid is ?0.2%, the reflux is changed to distillation, distilled 45kg of toluene (worked ethyl 4-chloroacetoacetate as a dilution solvent), stirring and lowering the temperature, when the temperature in the tank drops to 45 C, the reaction tank is filled with nitrogen, continue to cool down at-5 C, under stirring add 40 kg of N-(2-hydroxyethyl)-phthalimide, and the add 20 kg of sodium hydride, after the addition, cover the can lid, stirring at -5 C, into the metering tank draw 38.4 kg of ethyl 4-chloroacetoacetate, 45 kg of toluene and mix well, at -5 C condition added the drops of ethyl 4-chloroacetoacetate toluene solution, the dropping time is controlled at 4 hours, after the addition, the reaction is stirred and the temperature is slowly increased, the temperature of the reaction solution is slowly raised at 32 C within 5 hours, the reaction time is more than 12 hours, and the temperature is raised at 45 C to continue the heat preservation, until the reaction is complete, cool down, control the internal temperature of 25 C, add 61 kg of glacial acetic acid, after the addition, continue stirring to make the material in the reaction solution stir evenly, and the internal temperature is controlled at 25 C, add 180kg of water, add, continue to stir for 30 minutes, stop nitrogen filling, stop stirring, let stand, divide the water layer into the barrel and transfer the toluene layer to the washing tank, transfer the water layer into the reaction tank, into the reaction tank add 75kg of toluene, stir and let stand, the water layer is separated into barrels, and the toluene layer is transferred to a washing tank, the water layer is transferred into the reaction tank, 75 kg of toluene is added into the reaction tank, stirred, and allowed to stand, and the water layer was separated, combine the toluene layer into a water wash tank, add 100kg of 25% salt water to the washing tank, stir for 15 minutes, let stand for 30 minutes, and separate the water layer, obtained 4-[(2-phthalimido) ethyoxyl] ethyl acetoacetate toluene solution

The synthetic route of 3891-07-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shanghai Fenglin Biological Technology Co., Ltd.; Zheng Yulin; Chen Yushuang; Gao Huanhuan; Liu Lijuan; Yu Yaoying; (12 pag.)CN108358833; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 675109-26-9, name is 6-Bromoisoindolin-1-one, A new synthetic method of this compound is introduced below., Application In Synthesis of 6-Bromoisoindolin-1-one

To a solution of 6-bromo-2,3-dihydro-isoindol-l-one (1 equiv) in dry dioxan (0.1 M) were added bis(pinacolato)diboron (1.1 equiv), potassium acetate (3.5 equiv) and dppf (0.05 equiv). The reaction mixture was degassed with nitrogen for 20 minutes. PdCl2(dppf) (0.05 equiv) was added to the reaction mixture, which was degassed for a further 5 minutes. The reaction mixture was heated to 70C for 2 hours under nitrogen then heated to 1200C for 16 hours. The reaction mixture was partitioned between EtOAc and water. The aqueous phase was further extracted with EtOAc and the combined organic phases dried (MgSO4), filtered and concentrated in vacuo. The residue was sonicated in EtOAc, the suspension was filtered onto a sintered funnel and the collected grey solid was dried and used without further purification. 6-(4,4,5,5-Tetramethyl-[l,3,2]dioxaborolan-2-yl)-2,3-dihydro-isoindol-l-one: (82 % yield, 29 % purity, main impurity being the boronic acid 43 %) m/z (LC-MS, ESP): 519.5 [2M+H]+ R/T = 3.38 min

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; KUDOS PHARMACEUTICALS LIMITED; WO2008/23161; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 100487-74-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 100487-74-9, name is 6-Chloro-5-fluoroindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To the mixture of 6-chloro-5-fluoro-1,3-dihydro-indol-2-one (500 mg, 2.7 mmol) and 2-(4-Chloro-2-formyl-phenoxy)-2-ethyl-butyric acid methyl ester (844 mg, 2.97 mmol) (CGENETECH) in methanol (5 mL) was added pyrrolidine (95 mg, 1.35 mmol) dropwise. The mixture was then heated at 70 C. for 1 h. After cooled to room temperature, the mixture was partitioned between EtOAc and diluted HCl. The organic phase was washed with water, brine, dried over anhydrous Na2SO4 and concentrated to give the crude product as a red-yellow solid, which was used for the next step reaction without further purification.

The synthetic route of 6-Chloro-5-fluoroindolin-2-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Chen, Li; Han, Xingchun; Wang, Lisha; Wang, Min; Yang, Song; Zhang, Zhuming; US2010/190814; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 169037-23-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of isatin (0.15 g, 1 mmol), 5,5-dimethylcyclohexane-dione (0.14 g, 1 mmol), barbituric (0.13 g, 1 mmol) in gluconic acid aqueous solution (3 ml) was stirred at 100 C. The reaction progress was monitored by thin-layer chromatography. After completion of the reaction, the reaction mixture was cooled to room temperature. Then, the precipitated product was filtered and washed with water. The crude product was crystallized from ethanol to give 4a.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-(Trifluoromethoxy)indoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Guo, Rui-Yun; Wang, Ping; Wang, Guo-Dong; Mo, Li-Ping; Zhang, Zhan-Hui; Tetrahedron; vol. 69; 8; (2013); p. 2056 – 2061;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 774-47-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 774-47-0, name is 5,6-Difluoroindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of 5-amimotetrazole (1 mmol, 0.085 g), appropriateisatin (1 mmol), dimedone (1 mmol, 0.14 g) and [MeC(OH)2]+ClO4-(10 mol%) was stirred in EtOH/H2O (1:1, 4 mL) at 80 C. After theindicated time, the reaction was quenched into water (50 mL) andcooled. The precipitated product was separated by centrifugation andpurified by silica gel chromatography to afford the desired product. Allthe products were characterised by melting point, 1H NMR, 13C NMRand LC-MS.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5,6-Difluoroindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Dai, Yong; Qi, Gang; Qian, Xiao-Rong; Journal of Chemical Research; vol. 37; 11; (2013); p. 705 – 708;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 675109-45-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 675109-45-2, name is 6-Amino-2,3-dihydro-1H-isoindol-1-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

The starting material was prepared as follows: 6-Amino-2,3-dihydro-isoindol-1-one (0.810 g, CAS 675109-45-2) was dissolved in 12 ml of acetonitrile and treated successively with sodium iodide (2.458 g, 3 eq.), 1,5-dibromopentane (1.11 ml, 1.5 eq.), and N-ethyl-diisopropylamine (2.88 ml, 3.1 eq.), and the mixture was stirred at 75 C. for 20 h. Pouring onto crushed ice, twofold extraction with AcOEt, washing with water and brine, drying over magnesium sulfate, and evaporation of the solvents, followed by crystallization from hexane/ethyl acetate yielded 6-piperidin-1-yl-2,3-dihydro-isoindol-1-one (0.669 g) as light brown crystals, MS 217.3 ([M+H]+).

The synthetic route of 6-Amino-2,3-dihydro-1H-isoindol-1-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Gobbi, Luca Claudio; Zbinden, Katrin Groebke; Mohr, Peter; Obst, Ulrike; US2005/137168; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 102359-00-2, A common heterocyclic compound, 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, molecular formula is C9H7NO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The above material was dissolved in methanol (50 mL) and formic acid (5 miL) and hydrogenated over Pd/C (0.40 g) at elevated hydrogen pressure (50 psi) for 16 h. The reaction mixture was filtered through a plug of celite (10 g), the celite was washed with methanol (2X20 ML), the combined filtrates were evaporated to dryness, dissolved in H20 (20 mL), and re-evaporated. The resulting residue was dissolved in N, N-DIMETHYLFORMAMIDE (5 mL), and added in one portion to the previously prepared suspension of 2-oxoindoline-5-carboxylic acid (0.53 g, 3 MMOL), O-(BENZOTRIAZOL-L-YL)-N, N, N, N-TETRAMETHYLURONIUM tetrafluoroborate (1.1 g, 3.6 mmol), 1-HYDROXYBENZOTRIAZOLE (0.486 g, 3.6 mmol) and N,N-diisopropylethylamine (1.7 g, 12 mmol) in acetonitrile (10 ML) and N,N-dimethylformamide (10 mL). The mixture was stirred overnight, the solvents were removed in vacuo, and the residue was purified on a silica gel column using chloroform/methanol, (10: 1), then CHLOROFORM/METHANOL/AQUEOUS ammonia, (100: 10: 1), as the eluent. The semi-solid crude material was again subjected to silica gel chromatography using chloroform/methanol/aqueous ammonia, (150: 10: 1), as the eluent to afford 0.20 g (19% yield) the title compound as yellow foam: MS (ES) M/Z 367 (M++1).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ASTRAZENECA AB; WO2005/27823; (2005); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 667463-64-1, These common heterocyclic compound, 667463-64-1, name is 6-Bromo-1-methylindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 2: Synthesis of Intermediate I-4.2 [0294] I-4.1 (15.0 g, 63 mmol) and hydrazine hydrate (30 mL, 618 mmol) are heated to 125 C. for 72 h. To the cool reaction mixture DCM is added and extracted with water and 1 M HCl. The organic is layer is dried over MgSO4 and concentrated. The crystallized residue is dissolved in DCM, methanol is added and the DCM is removed in vacuo. The crystallized product is filtered by sunction and washed with cold methanol. Yield 63%, m/z 226/228 [M+H]+, rt 1.16 min, LC-MS Method V001-003.

The synthetic route of 667463-64-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; GRUNDL, Marc; MORSCHHAEUSER, Gerd; OOST, Thorsten; PAUTSCH, Alexander; US2014/275114; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 667463-64-1, name is 6-Bromo-1-methylindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C9H6BrNO2

1-4.1 (15.0 g, 63 mmol) and hydrazine hydrate (30 mL, 618 mmol) are heated to 125 C for 72 h. To the cool reaction mixture DCM is added and extracted with water and 1 M HC1. The organic layer is dried over MgS04 and concentrated. The crystallized residue is dissolved in DCM, methanol is added and the DCM is removed in vacuo. The crystallized product is filtered by sunction and washed with cold methanol. Yield 63%, m/z 226/228 [M+H]+, rt 1.16 min, LC-MS Method V001 003.

The synthetic route of 667463-64-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; GRUNDL, Marc; MORSCHHAEUSER, Gerd; OOST, Thorsten; PAUTSCH, Alexander; WO2014/140078; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem