Month: September 2021

Chemistry graduates have much scope to use their knowledge in a range of research sectors, including roles within chemical engineering, chemical and related industries, healthcare and more. , Synthetic Route of 60434-13-1

General procedure: To a mixture of ethyl acetoacetate or methyl acetoacetate (1 eqv), formaldehyde (1.1 eqv) and NH4OAc (1.5 eqv) in acetic acid (3 mL) was added FeWO4 (20 mol%) at room temperature and the mixture was heated at 80 C for 2 h (monitoring by TLC) to give poly-substituted pyridine (3), to this solution isatin (1 eqv) was added and heating continued at same temperature for 3 h (monitoring by TLC). After that the reaction mixture was cooled to room temperature neutralized with sodium bicarbonate and extracted with EtOAc (2 × 10 mL). The organic layers were washed with brine, dried using sodium sulphate .Evaporation of the solvent gave the crude product which was purified by silica gel column chromatography. Elution of the column with petroleum ether-EtOAc gave the desired product.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 60434-13-1.

Reference:
Article; Paplal, Banoth; Nagaraju, Sakkani; Sathish, Kota; Kashinath, Dhurke; Catalysis Communications; vol. 103; (2018); p. 110 – 115;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 667463-64-1, Having gained chemical understanding at molecular level, chemistry graduates may choose to apply this knowledge in almost unlimited ways, as it can be used to analyze all matter and therefore our entire environment.

I-12.1 (15.0 g, 63 mmol) and hydrazine hydrate (30 mL, 618 mmol) are heated to 125 C. for 72 h. To the cool reaction mixture DCM is added and extracted with water and 1 M HCl. The organic layer is dried over MgSO4 and concentrated. The crystallized residue is dissolved in DCM, methanol is added and the DCM is removed in vacuo. The crystallized product is filtered by suction and washed with cold methanol. Yield 63%, m/z 226/228 [M+H]+, rt 1.16 min, LC-MS Method V001-003.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 667463-64-1.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; BINDER, Florian; GRAUERT, Matthias; GRUNDL, Marc; HAEBEL, Peter Wilhelm; OOST, Thorsten; PAUTSCH, Alexander; PETERS, Stefan; VINTONYAK, Viktor; US2014/275025; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3484-35-3, name is 5-Methylindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 5-Methylindolin-2-one

General procedure: To a solution of 3-substituted-5-benzylidene-2-thioxo-4-thiazolidinone (3a-3h, 8a-8f) (0.003 mol) in 1,4-dioxane (15 ml) was added HC(OEt)3 (2 ml) and BF3·Et2O (2 ml). The reaction mixture was heated to 80 C and stirring was continued at the same temperature for 4 h. The resulting 2-ethylthio-3-substituted-5-benzylidene-4-thiazolium fluoroborate (4a-4h, 9a-9f) was precipitated, filtered off, and dried without any additional purification, as starting material for the following reactions. To a mixture of thiazolium fluoroborate (4a-4h, 9a-9f) (0.003 mol) and indolin-2-one (11a-11f) (0.003 mol) in acetonitrile (15 ml) was added triethylamine (0.91 g, 0.009 mol) dropwise at 25 C, and the mixture was stirred for 4 h at the same temperature. The orange precipitate was collected and washed with ethyl acetate (8 ml). The crude product thus obtained was recrystallized from methanol or acetone to give compound (5a-5s, 10a-10s).

Interested yet? This just the tip of the iceberg, You can reading other blog about 3484-35-3.

Reference:
Article; Wang, Shuobing; Zhao, Yanfang; Zhang, Guogang; Lv, Yingxiang; Zhang, Ning; Gong, Ping; European Journal of Medicinal Chemistry; vol. 46; 8; (2011); p. 3509 – 3518;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C9H4F3NO3

General procedure: A mixture of beta-nitrostyrenes, isatin and tyrosine (1:1:1) was stirredunder heating at 100 C for 1 h in [bmim]Br (200 mg). After the reaction was completed, 10 mL of ethyl acetate was added to the reaction mixture and stirred for 15 min. The organic layer was separated, washed with water, and dried. The cycloadduct was further purified using hexane: ethyl acetate (3:2 v/v) as eluent employing column chromatography technique. After extraction of the cycloadduct, [bmim]Br wasdried under vacuum at 80 C for 2 h to exclude any water trapped from moisture and reused for subsequent runs.

The synthetic route of 169037-23-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Kumar, Raju Suresh; Almansour, Abdulrahman I.; Arumugam, Natarajan; Mohammad, Faruq; Kotresha; Menendez, J. Carlos; Bioorganic and Medicinal Chemistry; vol. 27; 12; (2019); p. 2487 – 2498;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 20780-72-7, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 20780-72-7 as follows.

General procedure: Isatin 1 (147.1 mg, 1 mmol), (E)-1-phenylpent-2-ene-1,4-dione (2a, 348.4 mg, 2 mmol), and thiourea I (57 mg, 0.1 mmol) were cooled to -20 °C, dissolved in toluene (3 mL), and the mixture was stirred at -20 °C for 24 h. The progress of the reaction was monitored by TLC and NMR spectroscopy. The product was isolated by direct column chromatography on silica gel (CH2Cl2/EtOAc 95:5 to 85:15)

The chemical industry reduces the impact on the environment during synthesis 4-Bromoisatin. I believe this compound will play a more active role in future production and life.

Reference:
Article; Trubitson, Dmitri; ?ari, Sergei; Kaabel, Sandra; Kudrjashova, Marina; Kriis, Kadri; Jaerving, Ivar; Pehk, Tonis; Kanger, Tonis; Synthesis; vol. 50; 2; (2018); p. 314 – 322;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Chemistry graduates have much scope to use their knowledge in a range of research sectors, including roles within chemical engineering, chemical and related industries, healthcare and more. , COA of Formula: C8H4BrNO2

5-bromo-2-ethylisoindoline-1,3-dioneTo a solution of 5-bromoisoindoline-1 ,3-dione (1 130 mg, 5 mmol) in THF (25 mL) was added iodoethane (0.606 mL, 7.50 mmol) and then slowly was added NaH (144 mg, 6.00 mmol). The resulting reaction was stirred at RT for 22 h. To the reaction mixture was added DMF (2 mL) then stirred at RT for 23 h. To the reaction mixture was added more DMF (3 mL) then was stirred at RT for 120 h. The reaction mixture was diluted with H20 (20 mL), acidified with HCI (1 mL, 1.0 N), extracted with EtOAc (3 x 20 mL), washed with brine (20 mL), dried over MgS04, filtered, evaporated down under vacuum, and purified by flash chromatography to afford desired product 5-bromo-2-ethylisoindoline-1 ,3-dione (899.7 mg, 3.54 mmol, 70.8 % yield). LC-MS mlz 254.1 (M+H)+, 0.90 min (ret. time).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 6941-75-9.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; ASTEX THERAPEUTICS LIMITED; BOEHM, Jeffrey Charles; DAVIES, Thomas Glanmor; WOOLFORD, Alison Jo-anne; GRIFFITHS-JONES, Charlotte Mary; WILLEMS, Hendrika Maria Gerarda; NORTON, David; SAXTY, Gordon; HEIGHTMAN, Thomas Daniel; LI, Tindy; KERNS, Jeffrey K.; DAVIS, Roderick S.; YAN, Hongxing; WO2015/92713; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Academic researchers, R&D teams, teachers, students, policy makers and the media all rely on us to share knowledge that is reliable, accurate and cutting-edge. Synthetic Route of 39603-24-2

General procedure: In a 50 mL flask, a mixture of hydrazine hydrate 1 (1 mmol), beta-keto ester 2 (acetylacetic ether or ethyl benzoylacetate) (1 mmol) was stirred at room temperature (78C) for 5 minutes. And then, 2-hydroxynaphthalene-1,4-dione 3 (1 mmol), isatins 4 (1 mmol), MgCl2 (0.1 mmol) and 5 mL ethanol were added to it. The mixture was stirred at 78C for the appropriate time. After completion of the reaction (monitored by TLC), the reaction mixture was cooled to room temperature, 5 mL water was added to it. Then the precipitated products were filtered and washed with cold ethanol (3 mL×2) to afford the pure products as solid powder in good to excellent yields without further purification.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 39603-24-2.

Reference:
Article; Shen, Tianhua; Fu, Zhijie; Che, Fengfeng; Dang, Haibo; Lin, Yan; Song, Qingbao; Tetrahedron Letters; vol. 56; 9; (2015); p. 1072 – 1075;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Redox catalysis has been broadly utilized in electrochemical synthesis. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis., Reference of 19155-24-9

3,3-dimethyl-indol-2-one (0.65 g, 4.03 mmol) and sodium acetate (0.33 g, 4.07 mmol) were stirred in acetic acid (5 cm3) then bromine (0.66 g, 4.13 mmol) in acetic acid (5 cm3) was added drop-wise to the reaction mixture. The reaction was stirred for 50 min., then poured into water. The mixture was basified with sodium carbonate, extracted with ethyl acetate (.x.3), dried (MgSO4), filtered, and evaporated to give the subtitled compound (0.89 g, 92percent) 1H NMR (DMSO-d6) delta 1.21 (s, 6 H), 6.76 (d, 1 H, J=8.22 Hz), 7.29 (dd, 1 H, J=2.12 Hz, 8.23 Hz), 7.49 (d, 1 H, J=2.03 Hz), 10.4 (s, 1H).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 19155-24-9.

Reference:
Patent; American Home Products Corporation; Ligand Pharmaceuticals, Inc.; US6355648; (2002); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 141452-01-9, Chemistry built the modern world, from the materials that make up the everyday objects around us, the batteries in our devices and cleaning products that help to maintain sanitation.

Preparation of Compound 113, 6-(pyridin-2-ylmethoxy)nicotinic acid[00135] LiOH (1 .345 M, 0.615 mL, 0.827 mmol) was added to a solution ofCompound 1 12 (0.101 g, 0.414 mmol) in THF (2 mL), followed by MeOH (0.6 mL) and the reaction mixture was stirred at rt for 26 h, concentrated to remove organic solvents, diluted with water, and washed with EtOAc (1 x). The aqueous phase was acidified to pH 2-3 with 2 M HCI, and the resulting precipitate was isolated by filtration, washed with water and dried to afford the title compound (79 mg, 83%) as a white solid.1H NMR (500 MHz, DMSO) 5 13.07 (s, 1 H), 8.71 (dd, J = 2.5, 0.8 Hz, 1 H), 8.56 (ddd, J = 5.0, 1 .8, 1 .1 Hz, 1 H), 8.19 (dd, J = 8.6, 2.4 Hz, 1 H), 7.81 (td, J = 7.7, 1 .7 Hz, 1 H), 7.46 (br d, J = 7.8 Hz, 1 H), 7.34 (ddd, J = 7.6, 4.8, 1 .1 Hz, 1 H), 7.04 (dd, J = 8.6, 0.8 Hz, 1 H), 5.50 (s, 2H). HRMS (ESI+): calcd for C12H11N2O3 (M + H)+, 231 .0764; found 231 .0760.

Keep reading other articles of Methyl indoline-5-carboxylate! Don’t worry, you don’t need a PhD in chemistry to understand the explanations! I believe this compound will play a more active role in future production and life.

Reference:
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; JONES, Keith; RYE, Carl; CHESSUM, Nicola; CHEESEMAN, Matthew; PASQUA, Adele Elisa; PIKE, Kurt Gordon; FAULDER, Paul Frank; WO2015/49535; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., Application of 334952-09-9

2-carbonylindolone-6-carboxylic acid (40 g, 0.23 mol) was added to the reaction flask, 200 ml of methanol was added, and the mixture was slowly added dropwise, and the temperature was raised to 60 C by slowly dropping thionyl chloride (32 g, 0.27 mol). The reaction was carried out for 6 hours. After completion of the reaction, the reaction mixture was evaporated to dryness, ground with methanol, filtered and dried to obtain 40 g of 2-carbonylindolone-6-carboxylate in a yield of 93%.

The chemical industry reduces the impact on the environment during synthesis 2-Oxoindoline-6-carboxylic acid. I believe this compound will play a more active role in future production and life.

Reference:
Patent; (6 pag.)CN106854173; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem