S-21 News Chemistry Milestones Of 919103-45-0

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 919103-45-0, name is 6-Iodoindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. category: indolines-derivatives

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 919103-45-0, name is 6-Iodoindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. category: indolines-derivatives

Step 4: N-(2,5-Dimethyl-2H-pyrazol-3-yl)-2-(2-oxo-2,3-dihydro-1H-indol-6-ylsulfanyl)-benzamide CuI (40 mg, 0.05 mmol), potassium carbonate (1.66 g, 12 mmol), 6-iodooxindole (as prepared in Preparation 1; 0.5 g, 1.93 mmol) and N-(2,5-Dimethyl-2H-pyrazol-3-yl)-2-mercapto-benzamide (as prepared in step 3 above; 0.477 g, 1.93 mmol) were added to a dry schlenk tube. The tube was evacuated and refilled with Ar(g) (3 times). Isopropanol (3.0 mL) and ethylene glycol (0.250 mL) were injected into the schlenk tube. The schlenk tube was sealed with a teflon valve and was heated to 80 C. and stirred for over 24 hours. Subsequently the reaction mixture was allowed to reach room temperature then diluted with EtOAc (20 mL) and water (10 mL). The mixture was acidified with 1 M HCl(aq) and the organics were separated and set aside. The aqueous phase was washed with EtOAc (2×20 mL). The organic layers were combined, dried over silica gel, filtered and concentrated in vacuo affording a yellow solid. The solid was then purified via flash silica gel chromatography (gradient eluant 10 to 40% EtOAc in Hexanes) affording the title compound as a pale yellow solid (0.379 g, 1.01 mmol, 52% yield).

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 919103-45-0.

Reference:
Patent; Allergan, Inc.; US2007/15748; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

S-21 News Extracurricular laboratory: Synthetic route of 435273-55-5

Reference of 435273-55-5, The prevalence of solvent effects in heterogeneous catalysis has motivated developing quantitative kinetic, spectroscopic, and theoretical assessments of solvent structures and their interactions with reaction intermediates and transition states.

Reference of 435273-55-5, The prevalence of solvent effects in heterogeneous catalysis has motivated developing quantitative kinetic, spectroscopic, and theoretical assessments of solvent structures and their interactions with reaction intermediates and transition states.

Example 2: Synthesis of 5,6-dimethyldibenzo[crfj/lindol-4(5//)-one; 4-Bromo-2-methylisoindolin-l-one (60 mg, 0.26 mmol) obtained in Step 3 of Example 1, 2-acetylphenylboronic acid (51 mg, 0.32 mmol), tetrakis(triphenylphosphine)palladium (12 mg, 0.01 mmol), 2- (dicyclohexylphosphino)-2′-(N,N-dimethylamino)biphenyl (8 mg, 0.02 mmol) and cesium carbonate (259 mg, 0.80 mmol) were dissolved in a 1 m. of ethanol-2 mNo. toluene mixture and placed in a vessel. The vessel was sealed using a septum, and heated for 5 min at 120C and for 10 min at 150C is a microwave reactor and cooled to room temperature. The reaction mixture was filtered through a cellite column while washing with ethyl acetate, and the solvent was evaporated under a reduced pressure. The resulting residue was subjected to silica gel column chromatography to obtain 5,6- dimethyldibenzoindol-4(5H)-one (52 mg (77%)).1H NMR (300 MHz, CDCl3) delta 8.56-8.53 (m, 2H), 8.08-8.05 (m, 2H), 7.79-7.76 (m, IH), 7.65-7.59 (m, 2H), 3.75 (s, 3H), 2.84 (s, 3H).

Hope you enjoy the show about 435273-55-5.

Reference:
Patent; KOREA RESEARCH INSTITUTE OF CHEMICAL TECHNOLOGY; WO2009/51417; (2009); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

S-21 News What I Wish Everyone Knew About 496-12-8

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 496-12-8 as follows. 496-12-8

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 496-12-8 as follows. 496-12-8

To a stirred solution of [(3S,5S)-5-{[(2S)-2-cyanopyrrolidin-1-yl]carbonyl}-2-oxopyrrolidin-3-yl]acetic acid (265 mg, 0.50 mmol) and HOBt (42 mg, 0.55 mmol) in 1,4-dioxane (3 mL) was added a solution of EDC (105 mg, 0.55 mmol) in CH2Cl2 (3 mL). The mixture was stirred for 10 min at room temperature. Isoindoline (65 mg, 0.55 mmol) in CH2Cl2 (2 mL) was added with stirring. After 16 h, the reaction mixture was washed with saturated aqueous NaHCO3 (10 mL), 1 N aqueous citric acid (10 mL), and brine (10 mL). The organic layers were dried over MgSO4, filtered, and concentrated. The residue was purified over silica gel using CH2Cl2/MeOH (98:2) as an eluent to yield compound 1 (128 mg, 0.35 mmol, 70%). 1H NMR (300 MHz, CDCl3): (6/1 mixture of trans/cis amide rotomers) delta 7.30-7.26 (m, 4H), 6.56 (s, 0.86H), 6.06 (s, 0.14H), 4.82-4.77 (m, 4.86H, overlapped two singlet at 4.82, 4.77), 4.60 (d, J=6.6 Hz, 0.14H), 4.55 (d, J=9.0 Hz, 0.14H), 4.40 (dd, J=3.0, 9.0 Hz, 0.86H), 3.61-3.04 (m, 2H), 3.02-2.88 (m, 2H), 2.68-2.36 (m, 3H), 2.29-2.12 (m, 4H). MS (ES+) m/z calcd. for C20H22N4O3: 366.17. found: 367.1 (M+H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; National Health Research Institutes; US2010/234431; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

S News Extended knowledge of 87-48-9

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 87-48-9, name is 5-Bromoindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Application of 87-48-9

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 87-48-9, name is 5-Bromoindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Application of 87-48-9

General procedure: TiCl4 (0.7 mL, 6 mmol)was added to a stirred suspension of Zn powder (0.78 g, 12 mmol) in freshlydistilled anhydrous THF (15 mL) at room temperature (rt) under a dry N2atmosphere. After completion of the addition, the mixture was refluxed for 2 h.The suspension of the low-valent titanium reagent thus-formed was cooled tort. A solution of isatin or its derivatives 1 or 3 (2 mmol) in THF (10 mL) wasadded dropwise. The mixture was stirred at room temperature for about 5 minunder N2. After this period, the thin layer chromatography (TLC) analysis of themixture showed the reaction completed. The reaction mixture was quenchedwith 3% HCl (15 mL) and extracted with CHCl3 (3 50 mL). The combinedextracts were washed with water (3 50 mL) and dried over anhydrousNa2SO4. After evaporation of the solvent under reduced pressure, the crudeproduct was purified by column chromatography (petroleum ether/ethylacetate = 5:1) to give the pure products 2 or 4.

Because a catalyst decreases the height of the energy barrier, its presence increases the reaction rates of both the forward and the reverse reactions by the same amount.Read on for other articles about 87-48-9.

Reference:
Article; Lin, Wei; Hu, Ming-Hua; Feng, Xian; Fu, Lei; Cao, Cheng-Pao; Huang, Zhi-Bin; Shi, Da-Qing; Tetrahedron Letters; vol. 55; 14; (2014); p. 2238 – 2242;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

S News Continuously updated synthesis method about 56341-37-8

Chemistry graduates have much scope to use their knowledge in a range of research sectors, including roles within chemical engineering, chemical and related industries, healthcare and more. , Recommanded Product: 6-Chlorooxindole

Chemistry graduates have much scope to use their knowledge in a range of research sectors, including roles within chemical engineering, chemical and related industries, healthcare and more. , Recommanded Product: 6-Chlorooxindole

Compound 1 (62 mmol) and Compound 2 (60 mmol) were dissolved in 200 mL of methanol.After the dissolution was sufficient, piperidine (12 mmol) was added, and the mixture was refluxed at 70 C.After 5 hours, it was cooled to room temperature and stirred overnight.After the reaction is completed, the suspension is filtered.The obtained solid was washed three times with methanol and dried to give a yellow solid.Compound 3 data:

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 56341-37-8.

Reference:
Patent; South University of Science and Technology of China; Xu Jing; Ning Chengqing; Huang Hengjun; (47 pag.)CN108864113; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

S News What Kind of Chemistry Facts Are We Going to Learn About 52351-75-4

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., Computed Properties of C9H7NO3

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., Computed Properties of C9H7NO3

General procedure: A mixture of PPh3 (1.1 eq), isatin or 5-nitro-isatin (1.0 eq), andsubstituted 2-bromoacetate (1.1 eq) was heated at 80 C, then morpholine (1.1 eq) was added. After the reaction completion and cooling to the room temperature, the mixture was diluted with water, extracted with CH2Cl2, and the organic phase was dried over sodium sulfate. The solvent was removed under reduced pressure and the residue was purified by chromatography using Petroleum ether/Ethyl acetate to give the target compounds.

Hope you enjoy the show about 52351-75-4.

Reference:
Article; Song, Zhuang; Chen, Cai-Ping; Liu, Jun; Wen, Xiaoan; Sun, Hongbin; Yuan, Haoliang; European Journal of Medicinal Chemistry; vol. 124; (2016); p. 809 – 819;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

S News The origin of a common compound about 6872-06-6

While the job of a research scientist varies, most chemistry careers in research are based in laboratories, where research is conducted by teams following scientific methods and standards. , Related Products of 6872-06-6

While the job of a research scientist varies, most chemistry careers in research are based in laboratories, where research is conducted by teams following scientific methods and standards. , Related Products of 6872-06-6

General procedure: N-heterocycle substrate (0.2 mmol), Na-AMO (20 mg, 10 mol%), catechol Q-2 (3.3 mg, 0.02 mmol) was added into a reaction tube. The reaction tube was filled and protected with oxygen using a O2 balloon, then H2O was added into the reaction tube with a syringe. The reaction was allowed to react at room temperature for 20 h. After completion of reaction, the resulting mixture was filtered, washed with EtOAc and extracted by EtOAc. The organic phases were combined, washed with brine and dried with Na2SO4. Next, organic solution was concentrated under reduced vacuum to give the crude product. Finally, the product was purified by silica gel chromatography to yield the pure product.

I am very proud of our efforts over the past few months and hope to 6872-06-6 help many people in the next few years.

Reference:
Article; Tang, Tao; Bi, Xiuru; Meng, Xu; Chen, Gexin; Gou, Mingxia; Liu, Xiang; Zhao, Peiqing; Tetrahedron Letters; vol. 61; 5; (2020);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

S News Get Up to Speed Quickly on Emerging Topics: 1074-82-4

With the volume and accessibility of scientific research increasing across the world, it has never been more important to continue building the reputation for quality and ethical publishing we’ve spent the past two centuries establishing., Application of 1074-82-4

With the volume and accessibility of scientific research increasing across the world, it has never been more important to continue building the reputation for quality and ethical publishing we’ve spent the past two centuries establishing., Application of 1074-82-4

a) Preparation of 6-bromohexylphthalimide Potassium phthalimide (5.4 mmoles) was added to a solution of 1,6-dibromohexane (3.95 g; 16.2 mmoles) in dimethylformamide (8 ml) and heated to 80C approx. under stirring. Reaction times and process as per Example 4. 2.46 g of pure product were obtained. Yield 66%.

The design and synthesis of related molecules that are more effective, more selective, and less toxic than aspirin are important objectives of biomedical research.Keep reading other articles of Potassium 1,3-dioxoisoindolin-2-ide.

Reference:
Patent; MEDIOLANUM FARMACEUTICI S.P.A.; EP575954; (1993); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

9/23/2021 News The Shocking Revelation of 324-03-8

Chemical research careers are more diverse than they might first appear, as there are many different reasons to conduct research and many possible environments. Computed Properties of C8H4FNO2

Chemical research careers are more diverse than they might first appear, as there are many different reasons to conduct research and many possible environments. Computed Properties of C8H4FNO2

To a mixture of 5.0 g (30.3 mmol) 6-fluoro-1H-indole-2,3-dione in 75 mL of 33% aq. potassium hydroxide solution was added 4.67 g (53.0 mmol) pyruvic acid and this mixture was heated at 40C for 18 hours. After cooling to room temperature 10% aq. sulfuric acid was added (pH about 1). The formed solid was isolated by filtration and dried in vacuum. The solid was the desired 7-fluoroquinoline-2,4-dicarboxylic acid,which was used without further purification. Yield: 6.02 g (85%).1H-NMR (300 MHz, DMSO d6) 6 (ppm) = 7.78 (ddd, 1H), 7.99 (dd, 1H), 8.42 (s, 1H),8.89 (dd, 1H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; HEISLER, Iring; BUCHMANN, Bernd; CLEVE, Arwed; HEROULT, Melanie; NEUHAUS, Roland; PETRUL, Heike; QUANZ-SCHOeFFEL, Maria; KOPITZ, Charlotte Christine; (285 pag.)WO2016/202935; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

9/23/2021 News The origin of a common compound about 132898-96-5

HPLC of Formula: C8H4ClNO4S,The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research.

HPLC of Formula: C8H4ClNO4S,The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research.

General procedure: To a stirred solution of the N-Boc-protected pyrrolidine (1.0 mmol) in dry DCM (3 mL) at 0 C under argon atmosphere, TFA (1.14 g, 10.0 mmol) was added dropwise. The obtained solution was stirred at 0 C for 30 min followed by stirring at r.t. for 2 h. Subsequently, the solution was poured to cold 10% aq. NaOH (15 mL) and extracted with DCM (3 × 15 mL). The combined organic phases were dried over MgSO4 and concentrated under reduced pressure resulting in the corresponding unprotected pyrrolidine, which was used in the next step without further purification. The free pyrrolidine (ca. 1 mmol) from the previous step was then taken up in CHCl3 (2.2 mL) and DIPEA (2.0 mmol) was added. The solution was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.5 mmol) in CHCl3/THF (1:1, 15 mL) at room temperature. The resulting mixture was stirred further for 1 h and the solvent was removed under reduced pressure. After purification by flash column chromatography the target isatin sulfonamide was obtained.

According to the analysis of related databases, 132898-96-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Limpachayaporn, Panupun; Riemann, Burkhard; Kopka, Klaus; Schober, Otmar; Schaefers, Michael; Haufe, Guenter; European Journal of Medicinal Chemistry; vol. 64; (2013); p. 562 – 578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem