Month: September 2021

While the job of a research scientist varies, most chemistry careers in research are based in laboratories, where research is conducted by teams following scientific methods and standards. , Formula: C8H8N2O

General procedure: Isoindolin-1-one (200 mg, 1.50mmol) was dissolved in super-dry DMSO (4 mL), and Cs2CO3 (1215 mg, 3.75 mmol), CuI (58 mg, 0.30mmol) and N1,N2-dimethylethane-1,2-diamine (27 mg, 33 muL, 0.30 mmol) were added to the solution.The resulting mixture was stirred at room temperature for 10 min, after which iodobenzene (2.25mmol) was added. Then the mixture was heated to 120 C. When TLC showed that isoindolin-1-onehad been fully converted, the reaction was stopped. The mixture was extracted with ethyl acetate (20mL) and H2O (10 mL). The water phase was re-extracted with ethyl acetate (20 mL). The organic layerwas combined and washed with brine (10 mL). Then the solution was dried over anhydrous MgSO4,filtered and concentrated, and the crude residue was purified by flash chromatography over silica gelusing CH2Cl2/CH3OH as the gradient elution to afford the title compounds.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 6-Amino-2,3-dihydro-1H-isoindol-1-one, and friends who are interested can also refer to it.

Reference:
Article; Wang, Yixuan; Wang, Huiqiang; Jiang, Xinbei; Jiang, Zhi; Guo, Tingting; Ji, Xingyue; Li, Yanping; Li, Yuhuan; Li, Zhuorong; Molecules; vol. 24; 5; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

name: (S)-2-((2-Oxo-3-(4-(3-oxomorpholino)phenyl)oxazolidin-5-yl)methyl)isoindoline-1,3-dione,Chemistry involves the study of all things chemical – chemical processes, chemical compositions and chemical manipulation – in order to better understand the way in which materials are structured, how they change and how they react in certain situations.

20 g of 2-({(5S) -2-oxo-3-[4-(3-oxomo holin-4-yl) henyl]-1 ,3-oxazolidin-5-yl}methyl)-1H- isoindole-1,3(2H)-dione was suspended in 450 ml of ethanol, which was followed by addition of 6 ml of hydrazinehydrate in 50 ml of ethanol and the mixture was stirred and refluxed for 3 hours. Then, the suspension was cooled down to 65C and filtered and the cake was washed with 2×50 ml of nearly boiling ethanol. After drying 7.2 g of an off-white powder were obtained, which slowly melted at a temperature over 260C (this fraction contained 99.9% of 2,3-dihydrophtalazine-l,4-dione according to HPLC). After cooling of the hot filtrate another solid fraction separated. After its isolation by filtration and drying, 12.5 g of white lumpy powder with the melt, point of 141-144C was obtained (this fraction contained 86.7% of the desired product, 12.7% of 2,3-dihydrophtalazine-l,4-dione, and the rest to 100 % were other unidentifiable impurities according to HPLC). The yield of the isolated amine calculated to the pure substance was 73%.

Hope you enjoy the show about 446292-08-6.

Reference:
Patent; ZENTIVA, K.S.; HALAMA Ales; KRULIS Radim; DAMMER, Ondrej; KALASEK, Stanislav; WO2013/120465; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Chemistry graduates have much scope to use their knowledge in a range of research sectors, including roles within chemical engineering, chemical and related industries, healthcare and more. , Formula: C10H7NO2

A 20-mL, microwave reaction vessel was charged with (3-bromopyridin-4-yl)-(4-(trifluoro methyl)phenyl)methanol (2.0 g, 6.02 mmol), 2-vinylisoindoline-1,3-dione (1.16 g, 6.68 mmol), 2-(dicyclohexylphosphino)biphenyl (0.211 g, 0.60 mmol), Pd(dba)2 (0.176 g, 0.30 mmol), NEt3 (1.0 mL, 7.23 mmol), and DMF. The mixture was purged with argon and heated in microwave synthesizer at 150 C. for 1 h. The reaction mixture was partitioned between water and EtOAc. The EtOAc layer was separated and aqueous layer was extracted again with EtOAc. The combined organic layers were washed with saturated NaHCO3, dried over Na2SO4, filtered, and concentrated in vacuo. The brown residue was triturated with DCM, the resulting precipitate was collected by filtration to afford the title compound as an ivory colored solid. 1H NMR (400 MHz, CDCl3): delta 8.70 (s, 1H), 8.58 (d, J= 5.1 Hz, 1H), 7.92-7.95 (m, 2H), 7.79-7.7.84 (m, 3H), 7.55-7.64 (m, 5H), 7.24 (s, 0.5H), 7.19 (s, 0.5H), 2.71 (d, J= 3.4 Hz, 1H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3485-84-5.

Reference:
Patent; Nishimura, Nobuko; Norman, Mark H.; Tamayo, Nuria; Tang, Phi; Bo, Yunxin Y.; US2009/82358; (2009); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Chemistry graduates have much scope to use their knowledge in a range of research sectors, including roles within chemical engineering, chemical and related industries, healthcare and more. , Reference of 169037-23-4

General procedure: To a solution of isatin 1 (1 mmol) in toluene (5 mL) was added the solution of trialkyl/aryl Al 2 (2 mmol, 2 M in toluene) dropwise at RT. Then the mixture was heated at 70 C and stirred for additional 3-3.5 h (see Table 2). The reaction was monitored by TLC. After completion of the reaction, toluene was evaporated and extracted with ethyl acetate (3 × 5 mL). The combined organic layer was washed with brine solution, dried over anhydrous Na2SO4, and concentrated under reduced pressure (rotary evaporator). The crude products were purified by silica gel column chromatography using ethyl acetate/hexanes (4:1-1:1). All compounds were characterized by (MP, NMR, Mass, and IR) spectral data.18

Interested yet? This just the tip of the iceberg, You can reading other blog about 169037-23-4.

Reference:
Article; Kumar, G. Santosh; Ramesh, Palakuri; Kumar, A. Sanjeeva; Swetha; Meshram; Tetrahedron Letters; vol. 54; 37; (2013); p. 5048 – 5051;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 603-62-3, name is 3-Nitrophthalimide, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 603-62-3, Reference of 603-62-3

The preparation of 2-amino-6-nitrobenzoic acid was carried out in accordance with the literature (R. Kahn, Chem. Ber. 1902, 35, 3857-3884; W. S. Saari, J. E. Schwering, J. Heterocycl. Chem. 1986, 23, 1253-1255) via regioselective opening of 3-nitrophthalimide with aqueous potassium hydroxide to give phthalamic acid and subsequent Hofmann degradation with sodium hypobromite to give the 2-amino-6-nitrobenzoic acid.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 603-62-3.

Reference:
Patent; Gruenenthal GmbH; US2008/293749; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Redox catalysis has been broadly utilized in electrochemical synthesis. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis., Reference of 1127-59-9

8-Methyl-2-(2-pyridyl)quinoline-4-carboxylic acid (VI; R1 =2′-aza, R2 =H) A mixture of 2-acetylpyridine (IV; R1 =2-aza: 6.05 g, 0.05 mol) and 7-methylisatin (V; R2 =H: 8.52 g, 0.053 mol) in 65 mL of 50percent EtOH–H2 O containing KOH (13 g) was refluxed for 2 h, then diluted with 50percent EtOH–H2 O to obtain a homogeneous solution, filtered and acidified (HOAc). The resulting acid was collected, washed with 30percent EtOH–H2 O and recrystallized from DMF–EtOH to provide the product (9.4 g, 67percent, mp. 319°-320° C. Anal. (C16 H12 N2 O2) C,H,N. Similar reactions using appropriately substituted acetophenones gave the 8-methyl-2-phenylquinoline-4-carboxylic acids (VI) listed in Table III.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 1127-59-9.

Reference:
Patent; Development Finance Corporation of New Zeland; US4904659; (1990); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

We’ll be discussing some of the latest developments in chemical about CAS: 6941-75-9. Electric Literature of 6941-75-9

280 ml of 1 M Borane-THF complex was added dropwise to a stirred solution of 4-bromophthalimide (20.85 g; 92.2 mmol) in anhydrous THF (200 ml) at O0C then heated at reflux overnight. The reaction was cooled to 00C then treated cautiously with methanol (100 ml) followed by 2M HCI (100 ml) then heated at reflux for 3 hours. The reaction mixture was cooled and the organics evaporated. The aqueous was diluted with water (100 ml) the extracted with DCM (x3). The aqueous was basified with 2M NaOH then extracted with DCM (x3). The combined DCM extracts were dried (MgSO4), filtered and evaporated to give 6.99 g of 5-bromo-2,3-dihydro-1 H-isoindole as a dark brown gummy solid. 1H NMR (DMSO-d6) 7.45 (1 H, s), 7.36 (1H, d), 7.20 (1 H, d), 4.05 (4H, s).

In the meantime we’ve collected together some recent articles in this area about 6941-75-9 to whet your appetite. Happy reading!

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; WO2008/44045; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Academic researchers, R&D teams, teachers, students, policy makers and the media all rely on us to share knowledge that is reliable, accurate and cutting-edge. Reference of 71294-07-0

General procedure: To a 25 mL round bottomed flask was added different substituted oxindoles 8 (0.2 mmol, 1.0 equiv.) and bromoethylsulfonium salt 9 (132.99 mg, 0.3 mmol, 1.5 equiv.), DMF (2 mL). The mixture was stirred at room temperature for 5min and Et3N (61.88 mg, 0.6 mmol, 3.0 equiv.) was added into reaction system. The mixture was stirred for 6h at room temperature until the reaction completed, quenched with saturated ammonium chloride solution (5 mL), and was extracted with EtOAc (3×30 mL). The combined organic layer washed with H2O (2×10 mL), dried with anhydrous sodium sulfate. After concentration, product was purified using column chromatography on silica gel with suitable eluent.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 71294-07-0.

Reference:
Article; Qin, Hui; Miao, Yuanyuan; Zhang, Ke; Xu, Jian; Sun, Haopeng; Liu, Wenyuan; Feng, Feng; Qu, Wei; Tetrahedron; vol. 74; 47; (2018); p. 6809 – 6814;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16800-68-3, name is 1-Acetylindolin-3-one, A new synthetic method of this compound is introduced below., Safety of 1-Acetylindolin-3-one

General procedure: 1a (35.0 mg, 0.2 mmol, 1 equiv.), tert-BuOK (22.4 mg, 0.2 mmol, 1.0 equiv.) were added to a Schlenk tube. Then 2 ml THF was added using a syringe. The reaction mixture was stirred 15min,and then added iodonium salt 2 (0.2 mmol, 1.0 eq). The reaction was stirred at 30C for 10 hours.After cooling to room temperature, the solvent was removed in vacuo and the residue was purifiedby silica gel using a proper eluent (EtOAc/Hexane) to afford the desired products

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Acetylindolin-3-one, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Zhang, Yanxia; Han, Jianwei; Liu, Zhen-Jiang; Synlett; vol. 26; 18; (2015); p. 2593 – 2597;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

With the volume and accessibility of scientific research increasing across the world, it has never been more important to continue building the reputation for quality and ethical publishing we’ve spent the past two centuries establishing., Product Details of 1029691-06-2

To a mixture of Compound 3 (14 g, 61 mmol) in MeOH/THF (300 mL/50mL) was added NaBH4 (3.4 g, 90 mmol) at 0 C , and stirred at rt overnight. 1 N HCl was added slowly to quenched the reaction. The mixture was concentrated in vacuo, and and the mixture was extracted with EtOAc (500 mLx3). The organic layer was concentrated to give the crude product, which was purified by column chromatography to give the compound 4 (8.0 g, 57 %). LCMS: 236.1 [M+l].

Keep reading other articles of 2-(3-Oxocyclopentyl)isoindoline-1,3-dione! Don’t worry, you don’t need a PhD in chemistry to understand the explanations! I believe this compound will play a more active role in future production and life.

Reference:
Patent; NOVIRA THERAPEUTICS, INC.; HARTMAN, George D.; FLORES, Osvaldo A.; WO2013/96744; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem