Month: September 2021

With the volume and accessibility of scientific research increasing across the world, it has never been more important to continue building the reputation for quality and ethical publishing we’ve spent the past two centuries establishing., Application of 5332-26-3

N-(Bromomethyl)-phthalimide (14.4 g, 0.06 mol) and triethyl phosphite (12.0 g, 0.072 mol) were placed in a round-bottomed flask equipped with a reflux condenser and heated at 85-100 C. for 30 min. After the exothermic reaction had subsided, the flask was fitted for simple distillation and ethyl bromide was distilled from the reaction mixture with heating at 100-110 C. for 2 hours. The resulting light yellow oil solidified at room temperature. The crude product was washed with hexane and recrystallized from diethyl ether/hexane to yield white crystals. 16.0 g, 89.9%; mp 66-67 C. (lit. 67 C.); 1H NMR (CDCl3) delta 7.76 (m, 4H, C6H4), 4.19 (q, 4H, OCH2), 4.17 (d, 2H, CH2P), 1.33 (t, 6H, CH3).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(Bromomethyl)isoindoline-1,3-dione, its application will become more common.

Reference:
Patent; Board of Regents the University of Texas System; US6746662; (2004); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Safety of 1-(tert-Butoxycarbonyl)indoline-7-carboxylic acid, Modeling chemical reactions helps engineers virtually understand the chemistry, optimal size and design of the system, and how it interacts with other physics that may come into play.

A mixture of 1-(tert-butoxycarbonyl)indoline-7-carboxylic acid (460 mg, 1.75 mmol), MeI (0.22 mL, 3.5 mmol) and potassium carbonate (484 mg, 3.5 mmol) in acetone (20 mL) was heated at 60 C. After the reaction was complete, the reaction mixture was filtered through celite, eluted with dichloromethane and concentrated in vacuo. The residue was purified by silica gel chromatography with hexanes:ethyl acetate to give 1-tert-butyl 7-methyl indoline-1,7-dicarboxylate (390 mg, 80%).

The synthetic route of 143262-20-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DANA-FARBER CANCER INSTITUTE, INC.; Gray, Nathanael S.; Waller, David; Choi, Hwan Guen; Wang, Jinhua; Deng, Xianming; (104 pag.)US2016/24115; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In chemical reaction engineering, simulations are useful for investigating and optimizing a particular reaction process or system., Product Details of 25369-33-9

To a coo?ed (0 C) soution of 7-choroindohn-2-one (1 g, 6.0 mmo) in TFA (11 mL) was added Nbromosuccinimide (1 g, 6.0 mmo) portion wise and stirred the mixture at same temperature for 6 h. Concentrated TFA in vacuo with DCM (25 mL) and then with EtOAc. The crude product was triturated with ethano to provide the tiDe compound as a white soid (861 mg, 58% yie?d). MS (ES):mass cacd, for C6H5BrCNO, 244.9; m/z found, 246.0 [M+H]. 1H NMR (500 MHz, DMSO d6) oe 10.92 (5, 1 H), 7.52 7.48 (m, I H), 7.38 (d, J = 1.2 Hz, I H), 3.62 (s, 2H).

This is the end of this tutorial post, and I hope it has helped your research about 25369-33-9.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; AMERIKS, Michael K.; RAVULA, Suchitra; SAVALL, Bradley M.; SWANSON, Devin M.; ZIFF, Jeannie M.; SHIREMAN, Brock T.; (167 pag.)WO2016/176463; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 201940-08-1,Chemistry involves the study of all things chemical – chemical processes, chemical compositions and chemical manipulation – in order to better understand the way in which materials are structured, how they change and how they react in certain situations.

A mixture of 5-bromo-1,3-dihydro-isoindole-2-carboxylic acid tert-butyl ester (200 mg, 0.67 mmol), Pd (OAc) 2 (30 mg, 0.2 equiv), DPPP (55 mg, 0.2 equiv), TEA (0.93 mL, 10 equiv) and MeOH : DMSO (1: 1,4 mL) was stirred for 16 h under CO (balloon) at 80 C. LC-MS and TLC (20% EtOAc-Hexane) showed completion of the reaction. The Reaction mixture was concentrated to remove MeOH and diluted with EtOAc (10 mL), and washed with water (2 x 25 mL). The organic layer was dried (Na2S04), concentrated and purified by silica gel column chromatography (eluent = 20% EtOAc-Hexane), giving pure 1, 3-dihydro-isoindole-2,5- dicarboxylic acid 2-tert-butyl ester 5-methyl ester (150 mg, 81 %). MS (APCI+) : m/z 178.1 (MH+-Boc).

The design and synthesis of related molecules that are more effective, more selective, and less toxic than aspirin are important objectives of biomedical research.Keep reading other articles of tert-Butyl 5-bromoisoindoline-2-carboxylate.

Reference:
Patent; INTERMUNE, INC.; ARRAY BIOPHARMA INC.; WO2005/37214; (2005); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Academic researchers, R&D teams, teachers, students, policy makers and the media all rely on us to share knowledge that is reliable, accurate and cutting-edge. Computed Properties of C10H13N

A mixture of 3,3-dimethylindoline (5s, 103 mg, 0.700 mmol), potassium carbonate (288 mg,2.084 mmol), and 2-bromopropanenitrile (303 muL, 3.506 mmol) in 2 mL CH3CN was stirred at 80C overnight. The mixture was concentrated and purified by preparative HPLC. Fractions containing productwere partly concentrated and residue was extracted with 1 M NaHCO3 and CH2Cl2. Organic phases weredried over MgSO4, filtered, and concentrated to give 2-(3,3-dimethylindolin-1-yl)propanenitrile (105mg). LCMS m/z = 201.2 [M+1]+; 1H NMR (400 MHz, CDCl3) delta ppm 1.26 (s, 3H), 1.40 (s, 3H), 1.63 (d, J = 7.3Hz, 3H), 3.05 (d, 1H, J = 8.2 Hz), 3.25 (d, 1H, J = 8.2 Hz), 4.57 (q, 1 H, J = 7.3 Hz), 6.57 (d, 1H, J = 7.9 Hz),6.83-6.87 (m, 1H), 7.06 (dd, 1H, J1 =7.4 Hz, J2 = 0.8 Hz), 7.12-7.16 (m, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Dang, Huong; Feichtinger, Konrad; Frazer, John; Grottick, Andrew J.; Kasem, Michelle; Le, Minh; Lehman, Juerg; Morgan, Michael E.; Ren, Albert; Sage, Carleton R.; Schrader, Thomas O.; Semple, Graeme; Unett, David J.; Whelan, Kevin T.; Wong, Amy; Zhu, Xiuwen; Bioorganic and medicinal chemistry letters; (2020);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

While the job of a research scientist varies, most chemistry careers in research are based in laboratories, where research is conducted by teams following scientific methods and standards. , Quality Control of Isoindoline

Will Isoindoline (58 muL, 0.5 mmol),And a stirrer is placed in the reaction tube,After replacing the inert gas,DMF (193 muL, 2.5 mmol) was added, and the reaction tube was sealed.The reaction tube was placed in a 150 C oil bath reactor and the reaction was stirred for 96 hours.After cooling to room temperature, it was diluted with 15 mL of water and extracted with ethyl acetate three times, 15 mL each time.The combined extracts were dried over anhydrous sodium sulfate and filtered, and the filtrate was concentrated under reduced pressure, and the crude product was subjected to column chromatography with ethyl acetate: petroleum ether = 1:3 (1% triethylamine) as eluent. Get pure.Black oily liquid with a yield of 80%.

As always, wish you can browse a selection of our May HOT articles below about Isoindoline.

Reference:
Patent; Xiangtan University; Gong Xing; Yin Jiawen; Cai Changqun; (15 pag.)CN109293569; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 20780-72-7, name is 4-Bromoisatin, A new synthetic method of this compound is introduced below., Reference of 20780-72-7

General Procedure 3 Suzuki Coupling of 4-bromoindoline-2,3-dione Derivatives with Trifluoroborate Potassium Salts [0344] 4-Bromoisatin (1 eq) was added to a solution of the potassium trifluoroborate salt (1.4 eq), K3PO4 (3.6 eq) and degassed solvent. The reaction mixture was degassed and Pd(PPh3)2Cl2 or Pd(dppf)2Cl2 (0.1 eq) was added. The reaction vessel was sealed and heated by microwave irradiation (Biotage Initiator) for 4 h at 130° C. The reaction mixture was cooled to rt, diluted with EtOAc (10 mL/mmol substrate) and filtered through Celite®. The organic solution was washed with brine (10 mL/mmol substrate) and the resulting aqueous layer was further extracted with EtOAc (2×). The combined organic layers were dried over MgSO4, filtered and concentrated in vacuo to give the crude product which was purified as specified below. 4-(o-Tolyl)indoline-2,3-dione Following General Procedure 3,4-bromoisatin (100 mg, 0.44 mmol), potassium 2-methyphenyltrifluoroborate (123 mg, 0.62 mmol), K3PO4 (338 mg, 1.59 mmol) and Pd(PPh3)2Cl2 (31 mg, 0.04 mmol) in THF/H2O (3:1, 3 mL) gave the crude reaction mixture, which was purified via flash column chromatography (eluent 30-40° C. petrol/acetone, 4:1) to afford the product as an orange solid (65 mg, 59percent). deltaH (500 MHz, DMSO-d6) 2.15 (3H, s), 6.93 (2H, m), 7.14 (1H, d, J=7.6 Hz), 7.20-7.26 (1H, m), 7.30 (1H, d, J=7.3 Hz), 7.32-7.37 (1H, m), 7.56 (1H, app t, J=7.9 Hz), 8.84 (1H, br s) deltaC (125 MHz, DMSO-d6) 19.7, 111.2, 115.7, 125.6, 126.3, 128.6, 128.8, 130.1, 135.7, 136.4, 137.9, 142.8, 149.3, 159.2, 182.0 mp 161-162° C.

You can also check out more blogs about 20780-72-7.

Reference:
Patent; Christou, Ivy; Cross, Rebecca Lillian; Gianella-Borradori, Matteo; Greaves, David Robert; Russell, Angela Jane; Wynne, Graham Michael; US2014/378451; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In chemical reaction engineering, simulations are useful for investigating and optimizing a particular reaction process or system., Reference of 100510-65-4

EXAMPLE G N-Propyl-N’-[2,3-dihydro-3,3-dimethyl-2-oxo-(1H)-indol-6-yl]-urea 3.52 g. (0.02 mole) 6-amino-2,3-dihydro-3,3-dimethyl-(1H)-indolin-2-one are suspended in 40 ml. anhydrous dioxan and mixed at ambient temperature within the course of 10 minutes with a solution of 1.7 g. (0.02 mole) n-propyl isocyanate in 10 ml. dioxan, whereupon a clear solution is formed. Shortly thereafter, the product begins to separate out as a crystalline mass. After 1 hour, the suspension is mixed with ligroin and the precipitate is filtered off with suction, washed with ligroin and diethyl ether and recrystallized from ethanol. Yield 3.91 g. (75% of theory); m.p. 223-225 C.

You can get involved in discussing the latest developments in this exciting area about 6-Amino-3,3-dimethylindolin-2-one.

Reference:
Patent; Boehringer Mannheim GmbH; US4985448; (1991); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

While the job of a research scientist varies, most chemistry careers in research are based in laboratories, where research is conducted by teams following scientific methods and standards. , name: 2-(Bromomethyl)isoindoline-1,3-dione

EXAMPLE 20 Reaction of N-bromomethylphthalimide with trimethyl phosphite as described in Example 18 for N-(2-bromoethyl)phthalimide and triethyl phosphite gives dimethyl phthalimidomethylphosphonate.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(Bromomethyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SmithKline Corporation; US4112086; (1978); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Career opportunities within science and technology are seeing unprecedented growth across the world, and those who study chemistry or another natural science at university now have increasingly better career prospects. COA of Formula: C8H8N2O2

General procedure: We described the synthesis of the compound 1 (Table 2) to illustrate the general procedure for TFA accelerated Petasis three-component reaction. The descriptions of the preparations of all reported compounds are in the Supporting information section. To a magnetically stirred mixture of 5-nitroindoline (0.164 g, 1.0 mmol), 4-tolyboronic acid (0.135 g, 1.0 mmol), and glyoxylic acid monohydrate (0.092 g, 1.0 mmol) in CH2Cl2 (5 ml) was added TFA (20 mul). The mixture was stirred at room temperature for 4 h. After the completion of the reaction (TLC monitoring), half of the solvent was evaporated by means of a rotovap. The resulting solid was filtered through a sintered glass funnel. The collected solid was thoroughly washed with petroleum ether and a small amount of ice water (5 ml), and then dried in vacuo at room temperature for 24 h to afford 0.26 g (83.3 %) of 2-(5-nitroindolin-1-yl)-2-(p-tolyl) acetic acid as a light yellow solid.

This is the end of this tutorial post, and I hope it has helped your research about 32692-19-6.

Reference:
Article; Zhang, Jing; Yun, Fan; Xie, Rui; Cheng, Chunhui; Chen, Guangyao; Li, Jingxuan; Tang, Pingwah; Yuan, Qipeng; Tetrahedron Letters; vol. 57; 35; (2016); p. 3916 – 3919;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem