Month: September 2021

These common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 132898-96-5

General procedure: To a stirred solution of the N-Boc-protected pyrrolidine (1.0 mmol) in dry DCM (3 mL) at 0 C under argon atmosphere, TFA (1.14 g, 10.0 mmol) was added dropwise. The obtained solution was stirred at 0 C for 30 min followed by stirring at r.t. for 2 h. Subsequently, the solution was poured to cold 10% aq. NaOH (15 mL) and extracted with DCM (3 × 15 mL). The combined organic phases were dried over MgSO4 and concentrated under reduced pressure resulting in the corresponding unprotected pyrrolidine, which was used in the next step without further purification. The free pyrrolidine (ca. 1 mmol) from the previous step was then taken up in CHCl3 (2.2 mL) and DIPEA (2.0 mmol) was added. The solution was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.5 mmol) in CHCl3/THF (1:1, 15 mL) at room temperature. The resulting mixture was stirred further for 1 h and the solvent was removed under reduced pressure. After purification by flash column chromatography the target isatin sulfonamide was obtained.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 132898-96-5.

Reference:
Article; Limpachayaporn, Panupun; Riemann, Burkhard; Kopka, Klaus; Schober, Otmar; Schaefers, Michael; Haufe, Guenter; European Journal of Medicinal Chemistry; vol. 64; (2013); p. 562 – 578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 99365-40-9, Chemistry built the modern world, from the materials that make up the everyday objects around us, the batteries in our devices and cleaning products that help to maintain sanitation.

a) 6-Bromo-3,3-dimethyl-l,3-dihydro-indol-2-one To a suspension of potassium tert-butylate (12.8 g, 114 mmol) in dry THF (80 ml) at 0C under an argon atmosphere was added portionwise 6-bromoindolin-2-one (5.0 g, 22.9 mmol) followed by copper(I) bromide-dimethylsulfide complex (470 mg, 2.29 mmol). Mel (6.82 g, 3.00 ml, 48.0 mmol) was added dropwise within 45 minutes, keeping temperature of the reaction mixture below 8C. The reaction mixture was warmed to room temperature and kept at this temperature for 16 hours. The reaction mixture was cooled to 0C again and saturated aqueous ammonium chloride solution was cautiously added. The mixture was diluted with tert-butyl methyl ether and water. The aqueous phase was extracted with tert-butyl methyl ether, the combined organic phases were dried over sodium sulfate, the solvent was evaporated and the residue purified by silica gel chromatography using ethyl acetate/ heptane as eluent. The title compound was obtained as light yellow solid (5.17 g). MS ESI (m/z): 240.0/ 242.1 [(M+H)+]. 1H NMR (CDC13, 400 MHz): (ppm) = 8.12 (m, 1H), 7.20-7.16 (m, 1H), 7.09-7.08 (m, 1H), 7.06-7.04 (m, 1H), 1.39 (s, 6H).

The design and synthesis of related molecules that are more effective, more selective, and less toxic than aspirin are important objectives of biomedical research.Keep reading other articles of 6-Bromoindolin-2-one.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BRUNNER, Daniela; MALBERG, Jessica; SHANKAR, Bavani G.; KOLCZEWSKI, Sabine; LIMBERG, Anja; PRINSSEN, Eric; RIEMER, Claus; STOLL, Theodor; WO2014/40969; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 3676-85-5, name is 5-Aminoisoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3676-85-5, Recommanded Product: 3676-85-5

Example 88 N-(2,4-Dichlorobenzyl)-N’-(1,3-dioxo-2,3-dihydro-1H-5-isoindolyl)urea Diphenylphosphoryl azide (162 mg, 0.59 mmol, 1.2 eq) and triethylamine (60 mg, 0.59 mmol, 1.2 eq) were added to a solution of 2,4-dichlorophenylacetic acid (101 mg, 0.49 mmol) in toluene, and the mixture was stirred at 110C for 60 min. Thereafter, 4-aminophthalimide (80 mg, 0.49 mmol, 1.0 eq) and a minor amount of DMF were added thereto, and the mixture was stirred at 110C for 2.5 hr. After the completion of the reaction, water and ethyl acetate were added thereto, and the precipitated crystal was collected by filtration and was washed with ethyl acetate. The resultant crystal was washed with a chloroform/methanol solution to give the title compound as a crystal (9 mg, 5.0%). MS m/z: 363, 365 1H-NMR delta: 4.37 (2H, d, J = 4.88 Hz), 6.99 (1H, t, J= 5.22 Hz), 7.38 – 7.44 (2H, m), 7.57 – 7.63 (2H, m), 7.68 (1H, d, J = 8.29 Hz), 8.01 (1H, s), 9.46 (1H, s), 11.08 (1H, s)

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 3676-85-5.

Reference:
Patent; KIRIN BEER KABUSHIKI KAISHA; EP1256574; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 56341-37-8, name is 6-Chlorooxindole, A new synthetic method of this compound is introduced below., Quality Control of 6-Chlorooxindole

6-Chloroindolin-2-one (8.35 g, 50 mmol) and 3-chloro-2-fluorobenzaldehyde (8.295 g, 52.5 mmol) were stirred at reflux in the presence of piperidine (1 ml) for 6 hours. The reaction suspension was then filtered, and the solid obtained was washed with methanol and dried to give a yellow solid product, (E)-6-chloro-3-(3-chloro-2-fluorobenzylidene)indol2-one (14.63g, 47.5mmol). Yield: 95%. 1H NMR (400MHz, DMSO): delta 10.85 (s, 1 H), 7.70 (q, J=7.3Hz 2 H), 7.54 (s, 1 H), 7.36 (t, J=8Hz 1 H), 7.16 (d, J=8Hz 1 H), 6.92-6.86 (m, 2 H); MS: Calcd for C15H9Cl2FNO ([M+H]+): 308, found: 308.0.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6-Chlorooxindole.

Reference:
Patent; Xiao, Fei; MA, Jie; XIAO, Fei; REN, Hongjun; WANG, Wei; XU, Hongtao; WANG, Meng; ZOU, Lihui; DING, Fei; SU, Fei; (41 pag.)EP3498712; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 60434-13-1, name is 5-Chloro-1-methylindoline-2,3-dione, A new synthetic method of this compound is introduced below., Product Details of 60434-13-1

A mixture of 2- (1-benzyl-2-oxoindol-3-yl) acetic acid67.4 mg (0.24 mmol),5-chloro-1-methyl isatin 39 mg (0.2 mmol)N, N’-2- (7-benzo benzotriazole) -N, N, N ‘, N’-tetramethyluronium hexafluorophosphate (106.4 mg, 0.28 mmol)Triethylamine 50.6 mg (0.5 mmol)And 2 mL of tetrahydrofuran were placed in a 25 mL two-necked flask,Reaction at 0 C for 6 h,The reaction solution was concentrated,Eluting with a mixed solvent of petroleum ether: ethyl acetate ratio of 3: 1 as elution column,Collecting the eluted fraction of all the products detected,The solvent was removed by rotary distillation to give 82.4 mg of product,The yield was 90% and the Dr value was 4: 1.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 60434-13-1.

Reference:
Patent; China Pharmaceutical University; Du Ding; Cao Jing; Dong Shuding; (14 pag.)CN106749295; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 3676-85-5, Researchers are common within chemical engineering and are often tasked with creating and developing new chemical techniques, frequently combining other advanced and emerging scientific areas.

Example 82 N-(2-Chlorobenzyl)-N’-(1,3-dioxo-2,3-dihydro-1H-5-isoindolyl)urea Diphenylphosphoryl azide (165 mg, 0.60 mmol, 1.2 eq) and triethylamine (61 mg, 0.60 mmol, 1.2 eq) were added to a solution of 2-chlorophenylacetic acid (85 mg, 0.50 mmol) in toluene, and the mixture was stirred at 110C for 60 min. Thereafter, 4-aminophthalimide (81 mg, 0.50 mmol, 1.0 eq) and a minor amount of DMF were added thereto, and the mixture was stirred at 110C for 2 hr. After the completion of the reaction, water and ethyl acetate were added thereto, and the precipitated crystal was collected by filtration and was washed with ethyl acetate to give the title compound as a crystal (37 mg, 22.6%). MS m/z: 329 1H-NMR delta: 4.40 (2H, d, J = 5.61 Hz), 6.94 (1H, t, J = 5.98 Hz), 7.28 – 7.38 (2H, m), 7.41 (1H, dd, J = 1.71, 7.56 Hz), 7.46 (1H, dd, J = 1.71, 7.56 Hz), 7.61 (1H, dd, J = 1.83, 8.17 Hz), 7.68 (1H, d, J = 8.54 Hz), 8.01 (1H, d, J = 1.46 Hz), 9.42 (1H, s), 11.08 (1H, s)

We are continuing to develop the new Research Structures and WebCSD systems in response to feedback from you, our user community, so we would love to hear what you think about the enhanced search functionality and any suggestions you might have about 3676-85-5.

Reference:
Patent; KIRIN BEER KABUSHIKI KAISHA; EP1256574; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

SDS of cas: 6341-92-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 6341-92-0 as follows.

General procedure: A sealed tube was charged with isatin 1 (1a 147 mg, 1.0 mmol), ammonia hydrate 2 (25%, 421 mg, 3.0 mmol) and H2O2 (30%, 227 mg, 2.0 mmol) at room temperature, and then solvent DMSO (4 mL) was added. The resulting mixture was stirred at 30 C in a sealed vessel under air after 4 h, then added 50 mL water to the mixture, extracted with CH3COOC2H5 3 times (3 x 50 mL). The extract was washed with 30% NaCl solution (V/V), dried over anhydrous Na2SO4 and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel (Petroleum ether/Ethyl acetate = 3:1) to yield the desired product 3a as a yellow solid (89% yield).

Hope you enjoy the show about 6341-92-0.

Reference:
Article; Wang, Yu-Wei; Zheng, Lei; Jia, Feng-Cheng; Chen, Yun-Feng; Wu, An-Xin; Tetrahedron; vol. 75; 11; (2019); p. 1497 – 1503;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., name: 2-Methyl-5-nitroisoindoline-1,3-dione

EXAMPLE I In a 500 ml three-necked flask equipped with a mechanical stirrer, Dean-Stark trap/condenser, nitrogen inlet, and thermometer was added 25.71 grams (0.20 moles) of p-chlorophenol, 100 ml dimethylsulfoxide, and 150 ml of chlorobenzene. After stirring and nitrogen purging the mixture for 30 min., 15.80 grams of aqueous sodium hydroxide (50.62 wt. %; 0.20 moles) was added. The mixture was heated up to 150 C. with the azeotropic removal of the water of reaction. After the removal of water was complete the temperature was lowered to 60 C. and 41.23 grams (0.20 moles) of 4-nitro-N-methyl phthalimide was added. The mixture was stirred overnight. Upon cooling to room temperature the product precipitated from solution. Filtration, washing the precipitate with water, and recrystallization from isopropanol yielded 50.8 grams of 4-(p-chlorophenyl)-N-methyl phthalimide. The melting point was 131-132 C.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Methyl-5-nitroisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; General Electric Company; US4623732; (1986); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 496-12-8, New month, new HOT articles! We are pleased to share a selection of our referee-recommended HOT articles for 2021. We hope you enjoy reading these articles.

Preparation of the title compound was initiated by subjecting the product from step 2 A (0.02 g, 0.03 mmol) to isoindoline (0.01 g, 0.06 mmol) andDBU (0.01 g, 0.06 mmol) in 1 mL DCM at 45 0C for 3 h. Once complete byMS analysis, the reaction was diluted with 10 mL EtOAc and extracted withNaHCtheta3 (2 x 10 mL) and brine (2 x 20 mL). The organic phase was dried over anhydrous Na2SO4, filtered, and then concentrated in vacuo. The residue was purified by silica gel flash chromatography using 70%EtOAc/hexanes affording pyridazinone 4a. (0.01 g, 64 %).MS (ESI) m/z = 755.3 (M+H)+.

As always, wish you can browse a selection of our May HOT articles below about Isoindoline.

Reference:
Patent; ENANTA PHARMACEUTICALS, INC.; WO2008/19266; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Redox catalysis has been broadly utilized in electrochemical synthesis. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis., Application of 118-29-6

To a mixture of compound 2,3,3-Trimethylindolenine (1) (2.0 g, 12.5 mmol, 1.1 eq.) and A (Hydroxymethyl)phthalimide (3) (2.02 g 11.4 mmol, 1 eq.) were added 14.7 mL of concentrated sulfuric acid and the system stirred at room temperature for 6 days. The reaction was then poured over ice and made basic with concentrated aqueous ammonium hydroxide. After crystallizing at -20 C overnight, the resulting precipitate was filtered, rinsed with ice cold water, and dried under vacuum to give indolenine 4 as a light yellow shiny crystalline solid. Yield 88.3%. XH NMR (400 MHz, CDCl3); d 7.82-7.87 (m, 2H, Ar- H); 7.67-7.72 (m, 2H, Ar-H); 7.44-7.48 (m, 1H, Ar-H); 7.35-7.42 (m, 2H, Ar-H); 4.87 (s, 2H,CH2); 2.25 (s, 3H, CH3) 1.28 (s, 6H, CH3).

The chemical industry reduces the impact on the environment during synthesis 2-(Hydroxymethyl)isoindoline-1,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; SIMBERG, Dmitri; SMITH, Weston J.; (107 pag.)WO2019/126565; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem