Author: Jessica.F

Application In Synthesis of 5-Bromoisoindoline-1,3-dione, New month, new HOT articles! We are pleased to share a selection of our referee-recommended HOT articles for 2021. We hope you enjoy reading these articles.

General procedure: To a solution of NBP (1.5 mmol, 0.339 g) and DBU (1.5 mmol, 0.218 mL) in MeCN (2.0 mL), ethyl phenylphosphinate 1a (1.0 mmol, 0.154 mL) was added. The reaction mixture was stirred at 0 C for 10 min. After the starting material 1a was consumed as indicated by TLC, the reaction mixture was poured into water and then extracted with CH2Cl2 (3 x 10 mL). The combined organic phase was washed with water (3 x 10 mL), dried over anhydrous MgSO4, filtered and concentrated under reduced pressure. The crude product was purified by flash chromatography (silica gel, petroleum ether: ethyl acetate = 3:1) to give 2a (268 mg, 85%) as a white solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6941-75-9.

Reference:
Article; Li, Yueju; Liang, Fushun; Tetrahedron Letters; vol. 57; 26; (2016); p. 2931 – 2934;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 35197-64-9 as follows. Electric Literature of 35197-64-9

4-(4,6-d4-(4,6-Dimethoxy-l,3,5-triazin-2-yl)-4-methylmo holin-4-ium chloride (166 mg, 0.598 mmol) was added to a solution of methyl 3-amino-4-hydroxybenzoate (100 mg, 0.598 mmol) and 2-bromo-4-(l,3-dioxoisoindolin-2-yl)butanoic acid (187 mg, 0.598 mmol) in DMF (5 mL), and the reaction stirred overnight at ambient temperature. The reaction mixture was diluted with ethyl acetate and washed with brine. The organic layer was separated and concentrated to afford methyl 3-(2-bromo-4-(l,3-dioxoisoindolin-2-yl)butanamido)-4-hydroxybenzoate as a thin film which was used directly in the next step without further purification. MS (ESI, m/z): 461, 463 [M+H]+.

We are continuing to develop the new Research Structures and WebCSD systems in response to feedback from you, our user community, so we would love to hear what you think about the enhanced search functionality and any suggestions you might have about 35197-64-9.

Reference:
Patent; FORMA THERAPEUTICS, INC.; ZHENG, Xiaozhang; NG, Pui, Yee; THOMASON, Jennifer, R.; ZABLOCKI, Mary-Margaret; HAN, Bingsong; BARCZAK, Nicholas; LIU, Cuixian; RUDNITSKAYA, Aleksandra; LANCIA JR., David, R.; BAIR, Kenneth, W.; (315 pag.)WO2017/40963; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 3335-98-6, name is 1-Phenyloxindole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 3335-98-6

General procedure: A mixture of isatins (1, 1.0 mmol), indolin-2-ones (2, 1.0 mmol) and ZrCl4 (23 mg, 0.1 mmol) was heated in anhydrous ethanol (5 mL) under reflux. After the disappearance of the reactants (8-12 h, monitored by TLC), the mixture was slowly cooled to room temperature. The red solids precipitated and were collected by filtration, then washed by a small amount of anhydrous ethanol to deliver pure compounds 3.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Liu, Meilin; Qiu, Shaozhong; Ye, Yu; Yin, Guodong; Tetrahedron Letters; vol. 57; 52; (2016); p. 5856 – 5858;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Academic researchers, R&D teams, teachers, students, policy makers and the media all rely on us to share knowledge that is reliable, accurate and cutting-edge. Application of 110568-64-4

Step 3: 5-aminoisoindolin-1-oneIron powder (2.51 g, 45 mmol), water (0.97 ml) and HCl (37percent, 0.74 ml), were added to a stirred suspension of the 5-nitroisoindolin-1-one (800 mg, 4.5 mmol) from step 2 of this example in EtOH (11.2 ml). The mixture was heated at 95 °C for 2h. Ammonia (7N in MeOH) was added (ImL) to make the pH of the mixture alkaline. The mixture was filtered to removed undissolved solids and the filter cake washed with EtOH (2×40 ml). The filtrate and organic washes were combined and concentrated in vacuum to give the titled compound.

Statistics shows that 6-Nitroisoindolin-1-one is playing an increasingly important role. we look forward to future research findings about 110568-64-4.

Reference:
Patent; MERCK SHARP & DOHME CORP.; WOOD, Harold, B.; ADAMS, Alan, D.; SZEWCZYK, Jason, W.; ZHANG, Yong; YANG, Meng; WO2011/19538; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

SDS of cas: 169037-23-4, Having gained chemical understanding at molecular level, chemistry graduates may choose to apply this knowledge in almost unlimited ways, as it can be used to analyze all matter and therefore our entire environment.

Diethylcyanomethylphosphonate (279 mg, 1.58 mmol) was dissolved in dry THF (6 mL) at 0oC. Sodium hydride (66 mg, 1.15 mmol) was added and, to the resulting suspension, 5-trifluoromethoxyistain (347 mg, 1.50 mmol) was added slowly. Upon completion of the reaction as shown by TLC analysis, water (10 mL), brine (10 mL) and ethyl acetate (10 mL) were added and the aqueous layer extracted with ethyl acetate (3 x 5 mL) and dried with Na2SO4. The solvent was evaporated in vacuo and the resulting solid was purified by column chromatography (PSp:EtOAc 1:0 to 1:1) to yield a yellow product (31%), 1H NMR (400 MHz, CDCl3): d 6.39 (s, 1H), 6.91 (d, J 8.7, 1H), 7.26-7.31 (m, 1H), 7.84 (br s, 1H), 7.94 (d, J 1.9, 1H); 13C NMR (100 MHz, CDCl3): d 99.8, 111.3, 115.3, 118.9, 120.43 (q, J 258), 120.6, 126.9, 141.3, 142.5, 144.8 (q, J 2.1), 165.9; IR (neat, cm-1): 3254, 2228, 1760, 1728, 1624, 1473, 1245, 1124; HRMS: m/z: [M+Na]+ calcd for C11H5N2O2F3Na, 277.0195; found, 277.0188.

According to the analysis of related databases, 169037-23-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Davis, Holly J.; Kavanagh, Madeline E.; Balan, Tudor; Abell, Chris; Coyne, Anthony G.; Bioorganic and Medicinal Chemistry Letters; vol. 26; 15; (2016); p. 3735 – 3740;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Career opportunities within science and technology are seeing unprecedented growth across the world, and those who study chemistry or another natural science at university now have increasingly better career prospects. Application of 675109-45-2

6-Ammnoisoindolin-1-one (15.34 mg, 0.104 mmol) was dissolved in DCM (1.0 mL) along with pyridine (0.039 mL, 0.487 mmol) and DIEA (0.032 mL, 0.183 mmol). Intermediate 14SF (28 mg, 0.061 mmol) in 2 mL of DCM was added dropwise, and the reaction mixture was stirred at room temperature for 50 minutes. The reaction was quenched with 1.0 N HC1 (0.5 mL). All solvent was removed under vacuum. The crudewas dissolved in DMSO/THF (2:1, 6 mL) and purified via preparative LC/MS (method C,40-100% B over 18 mm, then a 5-mm hold at 100% B). Fractions containing the desired product were combined and dried via centrifugal evaporation to yield Example 178 (10.7 mg, 31% yield). ?H NMR (500MHz, DMSO-d6) 8.72 (s, 1H), 8.56 (s, 1H), 8.51 (br. s., 1H), 7.86 (d, J=10.7 Hz, 2H), 7.81 (br. s., 2H), 7.61 (br. s., 1H), 7.46 (d, J=5.8 Hz, 1H),5.48-5.38 (m, 1H), 4.54 (d, J12.2 Hz, 1H), 4.41 (dd, J=12. 1, 7.2 Hz, 1H), 4.29 (s, 2H),4.08 (s, 3H), 3.64 (dd, J15.9, 9.8 Hz, 1H), 3.36 (d, J=13.7 Hz, 1H), 2.62 (s, 3H);LC-MS: method C, 2 to 98% B. RT = 2.21 mm, MS (ESI) m/z: 572.30 (M+H).Analytical HPLC purity (method B): 100%.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 675109-45-2.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; ZHANG, Xiaojun; PRIESTLEY, Eldon Scott; HALPERN, Oz Scott; JIANG, Wen; REZNIK, Samuel Kaye; RICHTER, Jeremy M.; (545 pag.)WO2018/13776; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

SDS of cas: 3484-35-3,You could be based in a pharmaceutical company, working on developing and trialing new drugs; or in a public-sector research center, helping to ensure national healthcare provision keeps pace with new discoveries.

General procedure: To a solution of 3-substituted-5-benzylidene-2-thioxo-4-thiazolidinone (1-19) (0.003 mol) in 1,4-dioxane (15 mL) was added HC(OEt)3(2 mL) and BF3Et2O (2 mL). The reaction mixture washeated to 80 C and stirring was continued at the same temperature for 4 h. Theresulting 2-ethylthio-3-substituted-5-benzylidene- 4-thiazolium fluoroborate (Ic, IIc) was precipitated, filteredoff, and dried without any additional purification, as starting material forthe following reactions. To a mixture of thiazolium fluoroborate (Ic, IIc) (0.003 mol) and correspondingindolin-2-one (0.003 mol) in acetonitrile (15 mL) was added triethylamine (0.91g, 0.009 mol) dropwise at 25 C, and the mixture was stirred for 4 h at thesame temperature. The orange precipitate was collected and washed with ethylacetate (8 mL). The crude product thus obtained was recrystallized from methanol or acetone to give compound (1-19).

We are continuing to develop the new Research Structures and WebCSD systems in response to feedback from you, our user community, so we would love to hear what you think about the enhanced search functionality and any suggestions you might have about 3484-35-3.

Reference:
Article; Wang, Feng; Liu, Zijian; Wang, Jian; Tao, Jun; Gong, Ping; Bao, Xue; Zhao, Yanfang; Wang, Yulin; European Journal of Medicinal Chemistry; vol. 101; (2015); p. 126 – 132;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Recommanded Product: 1127-59-9, The prevalence of solvent effects in heterogeneous catalysis has motivated developing quantitative kinetic, spectroscopic, and theoretical assessments of solvent structures and their interactions with reaction intermediates and transition states.

General procedure: Mg(ClO4)2 (10 mol %) was added to a mixture of isatin (2 mmol), malononitrile or ethyl cyanoacetate (2mmol), and dimedone (2 mmol) in aqueous ethanol solution(50%, v/v, 5 mL), and the resulting mixture was stirred at 50C for 30-60 min. Upon completion of the reaction (TLC),the mixture was allowed to cool to room temperature. The resulting solid was filtered and washed successively with water (2 × 30 mL) and cold aqueous ethanol (2 × 1 mL) to afford pure product 4.

According to the analysis of related databases, 1127-59-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Wu, Chunlei; Shen, Runpu; Chen, Jianhui; Hu, Chunqi; Bulletin of the Korean Chemical Society; vol. 34; 8; (2013); p. 2431 – 2435;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 16800-68-3, name is 1-Acetylindolin-3-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Synthetic Route of 16800-68-3

General procedure: 1a (35.0 mg, 0.2 mmol, 1 equiv.), tert-BuOK (22.4 mg, 0.2 mmol, 1.0 equiv.) were added to a Schlenk tube. Then 2 ml THF was added using a syringe. The reaction mixture was stirred 15min,and then added iodonium salt 2 (0.2 mmol, 1.0 eq). The reaction was stirred at 30C for 10 hours.After cooling to room temperature, the solvent was removed in vacuo and the residue was purifiedby silica gel using a proper eluent (EtOAc/Hexane) to afford the desired products

This is the end of this tutorial post, and I hope it has helped your research about 16800-68-3.

Reference:
Article; Zhang, Yanxia; Han, Jianwei; Liu, Zhen-Jiang; Synlett; vol. 26; 18; (2015); p. 2593 – 2597;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 20870-79-5 as follows. Application In Synthesis of 5-Nitroindolin-2-one

To a suspension of the lactam (10.0 g, 56 mmol) in 200 ml of 1 ,2-dichloroethane, was added POBr3 (15.3g, 53.2 mmol) at RT. The resulting mixture was heated at reflux temperature in a 9OC oil bath for 0.5 hour (the reaction formed a copious amount of precipitate, and an oil bath was preferred over a heating mantle, as it provided gentle heating and avoided a darkening of the precipitate). The reaction was cooled just below reflux temperature, and imidazole (4.57 g, 62 mmol) was added in one portion. The resulting gummy suspension was heated at reflux temperature in an oil bath for another 2 hours. The reaction was cooled to RT, and 100 mL of ice-water was added. Solid NaHCO3 (ca. 50 g) was added to the mixture until no further gas was evolved. The suspension was extracted with DCM (4chi), and the combined DCM extracts were washed with 300 mL of brine. The DCM extracts were filtered through silica gel and concentrated to dryness to afford a crude product. The crude product was recrystallized from chloroform to give 5.41 g of the desired compound as a white solid. The filtrate was concentrated to dryness, and the residue was purified by flash column chromatography (30% EtO Ac/Hex) to give an additional 2.6 g of desired product. MS (ESI) m/e (MH-H+): 242.

You can also check out more blogs about 20870-79-5.

Reference:
Patent; MERCK SHARP &; DOHME CORP.; COBURN, Craig, A.; MCCAULEY, John, A.; LUDMERER, Steven, W.; LIU, Kun; VACCA, Joseph, P.; WU, Hao; HU, Bin; SOLL, Richard; SUN, Fei; WANG, Xinghai; YAN, Man; ZHANG, Chengren; ZHENG, Mingwei; ZHONG, Bin; ZHU, Jian; WO2010/111483; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem