Author: Jessica.F

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6341-92-0, name is 6-Chloroisatin, This compound has unique chemical properties. The synthetic route is as follows., name: 6-Chloroisatin

General procedure: A 25-mL flask, equipped with a magnetic stirring bar, was charged with 2-(1,3-dithiolan-2- ylidene)acetonitrile 1a (143 mg, 1.0 mmol), isatin 2a (74 mg, 0.5 mmol), and MeCN (3.0 mL), followed by addition of a solution of I2 (25 mg, 0.1 mmol) in MeCN (1.0 mL). The reaction mixture was stirred at 80 C for 12 h. After 1a was consumed, as indicated by TLC, the reaction mixture was quenched with saturated aqueous Na2S2O3 (1.0 mL) and water (20.0 mL), and stirred for another 10 min. The fully precipitated solid was filtered and washed with water (20.0 mL). Then it was further washed with petroleum ether-ethyl acetate (1/1, V/V, 20.0 mL) and dried under vacuum to afford 3a.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6341-92-0.

Reference:
Article; Liang, Deqiang; Li, Xiangguang; Yang, Juan; Li, Yanni; Wang, Baoling; Cheng, Ping; Synthetic Communications; vol. 46; 23; (2016); p. 1924 – 1931;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 17702-83-9,Some common heterocyclic compound, 17702-83-9, name is 2-(8-Bromooctyl)isoindoline-1,3-dione, molecular formula is C16H20BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 2-(omega-Bromoalkyl)-isoindoline-1,3-dione (1 equiv) with N-methylbenzylamine (1 equiv) or its substituted analog in the presence of K2CO3 (3 equiv) was stirred in acetonitrile under reflux for 16 h. Once the reaction was finished, the solvent was evaporated under vacuum, producing a residue that was further dissolved in 50 mL of 5 M NaOH and extracted with ethyl acetate (3 x 50 mL). The combined organic extracts were dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure. The crude product was purified by silica gel column chromatography (dichloromethane to dichloromethane/methanol 98:2), yielding a yellow oil. The final product was obtained in the form of hydrochloride salt. The following compounds were obtained.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(8-Bromooctyl)isoindoline-1,3-dione, its application will become more common.

Reference:
Article; Guzior, Natalia; Bajda, Marek; Rakoczy, Jurand; Brus, Boris; Gobec, Stanislav; Malawska, Barbara; Bioorganic and Medicinal Chemistry; vol. 23; 7; (2015); p. 1629 – 1637;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 317-20-4, name is 7-Fluoroisatin, This compound has unique chemical properties. The synthetic route is as follows., Safety of 7-Fluoroisatin

EXAMPLES Example 1 Preparation of 7-Fluoro-1,3-dihydroindol-2-one; To a mixture of 7-fluoro-1H-indole-2,3-dione (100 g, 0.606 mol) in ethylene glycol (500 mL) was added an aqueous hydrazine solution (54% wt, 73 g, 1.21 mol) dropwise over 30 minutes. The mixture was heated to 120 C. and stirred for 6 hours. The mixture was cooled to room temperature and water (500 mL) was added. Concentrated hydrochloric acid (HCl; 60 mL) was added, the mixture was warmed to about 35 to about 40 C., and the mixture was stirred for 1 hour. The mixture was then cooled to about 0 to about 5 C. The solid compound was filtered, washed with cold water and dried at 55 C. under vacuum to give an off-white solid (76 g) in 83% yield with 96% HPLC purity.

According to the analysis of related databases, 317-20-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Wyeth; US2007/27327; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 104618-31-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, This compound has unique chemical properties. The synthetic route is as follows.

The title compound from Step A above (28 g, 114 mmol) was dissolved in dichloromethane (990 mL) and pyridinium chlorochromate (33.6 g, 157 mmol) was added in portions. The reaction mixture was stirred at room temperature for 8 h. Then another batch of pyridinium chlorochromate (10.4 g, 48.6 mmol) was added in portions and stirring at room temperature was continued for 18 h. The reaction mixture was filtered through a pad of Celite and the Celite pad was washed with dichlormethane (400 mL). The combined filtrate was concentrated under reduced pressure and the residue was purified by chromatography on silica using ethyl acetate/n-heptane (60/40) as a mobile phase to afford the title compound as a white solid (24.62 g, 88%)1H-NMR (400 MHz, CDCl3): delta=2.17-2.24 (m, 2H), 2.60-2.71 (m, 4H), 2.80-2.90 (m, 2H), 4.78 (tt, 1H), 7.84-7.88 (m, 2H), 7.97-8.02 (m, 2H)

The chemical industry reduces the impact on the environment during synthesis 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Patent; AC Immune, S.A.; US2011/280808; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 102359-00-2, Application In Synthesis of 2-Oxoindoline-5-carboxylic Acid

General procedure: To a solution of 4 (1.77 g, 10 mmol) in 120 mL ofdichloromethane and 10 mL of DMF was added 4-methylmorpholine or DIEA (10 mL), TBTU (4.81 g, 15mmol) and aniline derivatives (11 mmol). The mixture wasstirred under room temperature for 18 h and washed in turnwith 5% sodium carbonate solution, 5% citric acid solutionand saturated sodium chloride solution. After dried byanhydrous sodium sulfate, the organic layer was evaporatedto dryness. The residue was purified with flash chromatography(CH2Cl2:CH3OH, 50:1) to afford intermediates 5a-5l, which were used in the next step in short time. To asolution of compounds 5a-5l (1.0 mmol) in 10 mL methanolwas added piperidine (30 muL) and 1H-pyrrole-2-carbaldehyde/furan-2-carbaldehyde (1.0 mmol). The mixturewas stirred at 60 C for 5 h and cooled to room temperature.After kept in fridge overnight, the target compounds 6a-6land 7a-7l were obtained in high yields.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Ai, Juntao; Lv, Meng; Li, Xiaohui; Chen, Zhuo; Hu, Gaoyun; Li, Qianbin; Medicinal Chemistry Research; vol. 27; 1; (2018); p. 161 – 170;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 1127-59-9, name is 7-Methylindoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1127-59-9, Formula: C9H7NO2

General procedure: Compound B (11.9 mg, 0.02 mmol) was added at 4 C in a mixed solution of Eosin 1a (29.4 mg, 0.2 mmol) and methyl acetoacetate 2a (107.8 muL, 1.0 mmol) in tetrahydrofuran (1.0 mL). The reaction was stirred at 4 C for 96 hours. Spin-drying, column chromatography (petrole ether: ethyl acetate = 1 : 1-1 : 2), and evaporated to give a pale yellow amorphous solid 49.0mg, yield 93%, 90% ee.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7-Methylindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Anhui University of Technology; Zhang Dongxin; Yin Lei; Zhong Junchao; Man Jingjing; Chen Yan; Zhang Qianfeng; (21 pag.)CN110041243; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 19727-83-4, name is 6-Nitroindoline, A new synthetic method of this compound is introduced below., SDS of cas: 19727-83-4

6-Aminoindoline A solution of 6-nitroindoline (1 g, 6.1 mmol) in 50 mL of ethyl acetate was hydrogenated under an atmosphere of hydrogen with Pd-C 10% (100 mg) at rt for 3 h. Filtration over celite afforded 1.0 g (98%) of 6-aminoindoline. Data for 6-aminoindoline: 1 H NMR (400 MHz, CDCl3) 7.40 (d,J=7.4, 1H), 6.05 (d,J=2.0, 1H), 6.03 (d,J=7.5, 1H), 3.67 (bs, 1H), 3.49 (t,J=8.1, 2H), 3.48 (bs, 2H), 2.90 (t,J=8.2, 2H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Ligand Pharmaceuticals Incorporated; US5696130; (1997); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 169037-23-4, The chemical industry reduces the impact on the environment during synthesis 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, I believe this compound will play a more active role in future production and life.

General procedure: To a suspension of intermediate 6 (0.2mmol) in anhydrous EtOH (30mL) was added different substituent (0.2mmol). The mixture was continually stirred under 50C for 2~3h until no starting material. Then the solvent was evaporated by rotary evaporation. The residue was purified by flash chromatography to afford compounds 7a-n.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-(Trifluoromethoxy)indoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Li, Hongling; Wang, Haijun; Wang, Jing; Lin, Yu; Ma, Yukun; Bu, Ming; Steroids; vol. 153; (2020);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 340702-10-5, name is 6-Fluoroisoindolin-1-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 340702-10-5

To a stirred solution of 6-fluoroisoindolin-l-one (10 g, 66.2 mmol) in anhydrous dichloromethane (100 mL) were added triethylamine (16.72, 165.5 mmol, 21.8 mL), di-iert-butyl dicarbonate (17.3 g, 79.4 mmol) and catalytic DMAP (100 mg) at room temperature. The reaction mixture was stirred at room temperature for 16 h. After completion, this was diluted with CH2CI2, washed with H20, and then washed with saturated aqueous NaHCC . The organic layer was dried over NaiSOzt, filtered and concentrated in vacuo. The crude compound was purified by silica gel, chromatography (0-30% ethyl acetate in hexanes) to give the product. MS: (ES) m/z calculated for C13H14FNO3 PVI + H]+ 252.3, found 252.3.

The synthetic route of 6-Fluoroisoindolin-1-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CHEMOCENTRYX, INC.; CHEN, Xi; DRAGOLI, Dean, R.; FAN, Junfa; KALISIAK, Jaroslaw; KRASINSKI, Antoni; LELETI, Manmohan, Reddy; MALI, Venkat; MCMAHON, Jeffrey; SINGH, Rajinder; TANAKA, Hiroko; YANG, Ju; YU, Chao; ZHANG, Penglie; (198 pag.)WO2017/87607; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 59-48-3, name is Indolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of Indolin-2-one

To a 50 ml single-flask containing 30 ml of acetonitrile was cooled to 0C. Indole-2-one (0.023 mol) and N-bromosuccinimide (0.023 mol) was added, and then stirred at 0C for 4 hours. The primrose precipitate was collected by vacuum filtration, washed with water, and dried under in the air.

The synthetic route of Indolin-2-one has been constantly updated, and we look forward to future research findings.

Reference:
Article; Wang, Lihong; Li, Zhanshan; Lu, Lianhong; Zhang, Wei; Tetrahedron; vol. 68; 5; (2012); p. 1483 – 1491;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem