Author: Jessica.F

Adding a certain compound to certain chemical reactions, such as: 17630-75-0, name is 5-Chloro-2-oxindole, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 17630-75-0, Recommanded Product: 17630-75-0

7-Bromo-5-Chloro-2-Oxindole 5-Chloro-2-oxindole (16.8 g) and 19.6 g of N-bromosuccinimide were suspended in 140 mL of acetonitrile and refluxed for 3 hours. Thin layer chromatography (silica, ethyl acetate) at 2 hours of reflux showed 5-chloro-2-oxindole or N-bromosuccinimide (Rf 0.8), product (Rf 0.85) and a second product (Rf 0.9) whose proportions did not change after another hour of reflux. The mixture was cooled to 10 C., the precipitate was collected by vacuum filtration, washed with 25 mL of ethanol and sucked dry for 20 minutes in the funnel to give 14.1 g of wet product (56% yield). The solid was suspended in 200 mL of denatured ethanol and slurry-washed by stirring and refluxing for 10 minutes. The mixture was cooled in an ice bath to 10 C. The solid product was collected by vacuum filtration, washed with 25 mL of ethanol and dried under vacuum at 40 C. to give 12.7 g (51% yield) of 7-bromo-5-chloro-2-oxindole.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Chloro-2-oxindole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Sugen. Inc.; US2003/100555; (2003); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7477-63-6, name is 7-Chloroisatin, This compound has unique chemical properties. The synthetic route is as follows., Safety of 7-Chloroisatin

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 °C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

According to the analysis of related databases, 7477-63-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 181140-34-1, These common heterocyclic compound, 181140-34-1, name is (R)-(-)-N-(2,3-Epoxypropyl)phthalimide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Compounds 3-7 have been synthesized using a procedure originally reported by Roehrig et al.16 Chiral amine or amino alcohol (0.6 mmol, 1.2 equiv) in 10 mL isopropanol was added to the solutionof (R)-N-(2,3-epoxypropyl)phthalimide (102 mg, 0.50 mmol)in 10 mL of isopropanol at in an ice bath and stirred for 1 h. then refluxed for 12 h. The reaction monitored by TLC. Solvent was removed by rotary evaporator under reduced pressure after completion of the reaction.

The synthetic route of 181140-34-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Karakaplan, Mehmet; Jameel, Basam; Tetrahedron Asymmetry; vol. 27; 14-15; (2016); p. 597 – 602;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7699-18-5, name is 5-Methoxyindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C9H9NO2

General procedure: Amixture of 2-oxindole (5.19 mmol), 4-(dimethylamino)cinnamaldehyde (5.71mmol) and piperidine (3.11 mmol) in methanol (20 mL) was heated under refluxfor 18 h. Then, the mixture was concentrated under reduced pressure. The residuewas purified by silica gel column chromatography (hexane/ethyl acetate/methanol= 50/50/1) to afford A (Y1 =H, 55%) as reddish brown crystals.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 7699-18-5.

Reference:
Article; Furuta, Kyoji; Kawai, Yu; Mizuno, Yosuke; Hattori, Yurika; Koyama, Hiroko; Hirata, Yoko; Bioorganic and Medicinal Chemistry Letters; vol. 27; 18; (2017); p. 4457 – 4461;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 611-09-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 611-09-6 as follows.

General procedure: A mixture of isatin derivatves (1 mmole), malononitrile (1 mmole),1,3-dicarbonyl compounds (1 mmole), and Fe3+-mont. (0.05 g) in CH3CN(5 mL) was heated using an Elmasonic S 40 H ultrasonic cleaning unit at 50 C under silent condition. The progress of the reaction was monitored by TLC (EtOAc/hexane 3:7). After completion of the reaction, the catalyst was removed by filtration. Water was added to the residue. The solid which was obtained was filtered off and dried to provide pure products of the spirooxindole derivatives (4a-j) (Table 3).

According to the analysis of related databases, 611-09-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Mamaghani, Manouchehr; Tabatabaeian, Khalil; Pourshiva, Mina; Nia, Roghayeh Hossein; Journal of Chemical Research; vol. 39; 6; (2015); p. 314 – 317;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 496-12-8 as follows. name: Isoindoline

Example 68A 4-bromophenyl isoindoline-2-carboxylate To a solution of isoindoline (167 mg, 1.401 mmol) and DIEA (0.445 mL, 2.55 mmol) in CH2Cl2 (3 mL), was added 4-bromophenyl carbonochloridate (300 mg, 1.274 mmol). The mixture was stirred at rt for 1 h, then was quenched with water. The mixture was diluted with EtOAc (100 mL), then was washed with 1N HCl, sat Na2CO3 and brine, dried over Na2SO4, and concentrated. The crude product was purified via flash chromatography to afford 310 mg (76%) of Example 68A. MS (ESI) m/z: 318.0 (M+H)+; 1H NMR (500 MHz, CDCl3) delta 7.53-7.48 (m, 2H), 7.36-7.29 (m, 4H), 7.13-7.07 (m, 2H), 4.94 (s, 2H), 4.84 (s, 2H)

According to the analysis of related databases, 496-12-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Glunz, Peter W.; Zou, Yan; Quan, Mimi L.; US2014/206686; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 446292-08-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 446292-08-6 as follows.

The reaction flask was charged with 210.7 g (0.5 mol) of the compound prepared in Example 7, (S)-2-{[2-oxo-3-(4-(3-oxorpholine)phenyl)oxazolidin-5-yl]methyl}isoindole-(VII), 1500 ml of absolute ethanol, 500 ml of 30% aqueous methylamine solution, stirred evenly, heated to 40 C to 60 C for 8 hours, TLC in the control (dichloromethane: methanol = 20: 1, volume ratio) reaction is complete, with 10% hydrochloric acid to adjust the pH between 1-2 to precipitate a large number of white solid, cooled to about 15 C, stirring 2 hours, filter. The filter cake was washed with 300 ml of absolute ethanol and dried under reduced pressure to give 147.0 g of a white solid (compound of formula VIII) with a molar yield of 89.7% and an HPLC purity of 98.7%.

According to the analysis of related databases, 446292-08-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Peking University Fangzheng Group Co., Ltd.; Peking University Pharmaceutical Co., Ltd.; Peking University Medical Treatment Industrial Group Co., Ltd.; Xu Hong; Lei Bingying; Zhang Zheng; Wang Wei; Ren Juan; (15 pag.)CN105085370; (2017); B;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 17702-83-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 17702-83-9, name is 2-(8-Bromooctyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Procedure M1. A mixture of the appropriate 2-(bromoalkyl)isoindoline-1,3-dione (1 equiv) with amine (pyrrolidine or morpholine) (1.1 equiv) in the presence of K2CO3 (3 equiv) was stirred in acetonitrile under reflux for 20 h. Subsequently, the solvent was evaporated under reduced pressure,producing a residue which was further dissolved in 20 mL of water and extracted with DCM(3 x 30 mL). The organic layer was dried with anhydrous Na2SO4. The solvent was then evaporated and the residue was purified by silica gel column chromatography (S3) yielding a yellow oil. The finalproduct was transformed into hydrochloride salt. The following compounds were obtained.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(8-Bromooctyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Hebda, Michalina; Bajda, Marek; Wieckowska, Anna; Szal?aj, Natalia; Pasieka, Anna; Panek, Dawid; Gody?, Justyna; Wichur, Tomasz; Knez, Damijan; Gobec, Stanislav; Malawska, Barbara; Molecules; vol. 21; 4; (2016);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 5332-26-3, A common heterocyclic compound, 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, molecular formula is C9H6BrNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3.5 g (87 mmol) of sodium hydride are added portionwise to a solution of 25 g (87 mmol) of dimethyl 2-(4-tert-butoxycarbonylpiperazin-1-yl)malonate in 250 ml of tetrahydrofuran cooled to 2 C. The reaction medium is stirred at ambient temperature for 30 minutes and then brought back to 2 C., before adding, dropwise, 21 g (87 mmol) of 2-bromomethylisoindole-1,3-dione in 200 ml of tetrahydrofuran. The reaction medium is stirred at ambient temperature for 20 h, treated by adding 500 ml of water and then extracted with ethyl acetate. The organic phase is dried over magnesium sulfate, filtered, and concentrated under vacuum. [0193] The crude product obtained is purified by chromatography on silica gel, elution being carried out with a 70/30 heptane/ethyl acetate mixture. 27.5 g (73%) of dimethyl 2-(4-tert-butoxycarbonylpiperazin-1-yl)-2-(1,3-dioxo-1,3-dihydroisoindol-2-ylmethyl)malonate are obtained in the form of a white solid.

The synthetic route of 5332-26-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GALDERMA RESEARCH & DEVELOPMENT; MOUNIER, Carine; Carlavan, Isabelle; Aubert, Jerome; Jomard, Andre; Rossio, Patricia; US2014/275108; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 61-70-1, name is 1-Methylindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 1-Methylindolin-2-one

Step 2; Preparation of 1-methyl-5-nitro-1,3-dihydro-indol-2-one; 1-Methyl-1,3-dihydro-indol-2-one (Step 1, 2.10 g, 14.3 mmol) is added in portions to 70% nitric acid (10 ml) at -10 C. After the addition is complete, the reaction is allowed to warm to room temperature and then stirred for 5 hours. The mixture is diluted with ice water and the resulting precipitate filtered, washed with water, and dried under a vacuum to give the title compound as a brown solid. HPLC r.t. 3.97 min; MS for C9H8N2O3 m/Z 193.9(M+H)+.

The synthetic route of 1-Methylindolin-2-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Josyula, Vara Prasad Venkata Nagendra; Luehr, Gary; Gordeev, Mikhail; US2006/229348; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem