Author: Jessica.F

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 61-70-1 as follows. COA of Formula: C9H9NO

General procedure: All reactions were conducted in 10 mL glass vials fitted with crimpcap septum caps. The reaction vial, equipped with a magnetic stir bar,was charged under an N2 atmosphere with 1-methylindolin-2-one (4)(73.6 mg, 0.5 mmol), Pd2(dba)3 (10 mg, 0.011 mmol, 2.5 mol%), i-Pr-BI-DIME (7) (0.022 mmol, 5 mol%), LiHMDS (1 M in toluene, 0.55 mL,0.55 mmol) and the aryl halide (1.1 equiv), then sealed with a crimpcap septum. THF (0.5 mL) and toluene (0.5 mL) were added via syringe and the reaction was heated to 70 C for 4-24 h. The reaction mixture was cooled to room temperature then filtered through a Celite pad with EtOAc (5 mL) as eluent. The filtered solution waswashed with H2O (3 mL), dried over MgSO4 and then concentrated under reduced pressure. The crude residue was purified using a 12 g silica column (30% EtOAc/hexanes) to afford the corresponding oxindole product.

According to the analysis of related databases, 61-70-1, the application of this compound in the production field has become more and more popular.

Reference:
Article; Mangunuru, Hari P. R.; Malapit, Christian A.; Haddad, Nizar; Reeves, Jonathan T.; Qu, Bo; Rodriguez, Sonia; Lee, Heewon; Yee, Nathan K.; Song, Jinhua J.; Busacca, Carl A.; Senanayake, Chris H.; Synthesis; vol. 50; 22; (2018); p. 4435 – 4443;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 3335-98-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 3335-98-6 as follows.

General procedure: An oven-dried reflux tube equipped with a magnetic stir bar and a Teflon stopcock was charged with aryl halide (1 mmol), oxindole (1 mmol),potassium carbonate (1.1 mmol), catalyst nanoparticles (0.05 mmol)and 1,4-dioxane (2 ml) and heated at 70 C. The mixture was vigorously stirred under these reaction conditions and completion of the reaction was monitored by TLC (EtOAc: n-hexane, 25:75). After completion of the reaction, the reaction mixture was cooled to room temperature, the magnetic nanoparticles of the catalyst were collected using a magnet. Ethyl acetate (5 mL) and water (10 mL)were added to the mixture in the next step. The aqueous layer was furtherextracted by ethyl acetate (2*5 mL). The combined organic layerswere washed with saturated brine, dried over CaCl2, filtered, and concentrated to give a residue which was purified by recrystallization from ethanol and water or by column chromatography on silica gelusing EtOAc: n-hexane, 1:7.

According to the analysis of related databases, 3335-98-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Moghaddam, Firouz Matloubi; Tavakoli, Ghazal; Latifi, Fatemeh; Saeednia, Borna; Catalysis Communications; vol. 75; (2016); p. 37 – 41;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 15937-07-2, The chemical industry reduces the impact on the environment during synthesis 15937-07-2, name is 5,6-Dimethoxyindoline, I believe this compound will play a more active role in future production and life.

1st Stage 7.1 g of 2-chloro-5-nitropyridine (0.045 mol) were stirred with 8.0 g of 5,6-dimethoxyindoline (0.045 mol) and 4.2 g of sodium hydrogen carbonate (0.050 mol) for 2.5 h at 80 C. in 50 ml of DMSO. After cooling, the mixture was poured onto ice, the precipitate was removed by filtration under suction and the product was dried in vacuo at 45 C. The intermediate product 5,6-dimethoxy-1-(5-nitro-(2-pyridyl)-indoline was obtained in a yield of 23.1% (melting point: 202-207 C.).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5,6-Dimethoxyindoline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Naumann, Frank; Hollenberg, Detlef; Hoeffkes, Horst; Rose, David; US2004/6834; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 19727-83-4, name is 6-Nitroindoline, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 19727-83-4, category: indolines-derivatives

Example 26 6,7-Dimethoxy-4-(6-nitro-2,3-dihydro-indol-1-yl)-quinazoline Utilizing a procedure analogous to that described in Example 1, this product was prepared in 91% yield from 6-nitro-indoline (1 eq.) and 4-chloro-6,7-dimethoxy-quinazoline (1.0 eq) in i-PrOH. (M.P. 275 C. (dec); GC-MS: 352 (M+); anal. RP18-HPLC RT: 4.30 min.).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 6-Nitroindoline, and friends who are interested can also refer to it.

Reference:
Patent; Pfizer Inc.; US5736534; (1998); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 774-47-0, name is 5,6-Difluoroindoline-2,3-dione, molecular formula is C8H3F2NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 774-47-0

Example 3 2-Amino-4,5-difluorobenzoic acid To a 2 liter four neck round bottom flask equipped with a mechanical stirrer, a condenser and a thermometer was charged 100 g of 5,6-difluoroisatin and 900 ml of aqueous 2.5N sodium hydroxide solution. The mixture was stirred until a homogeneous purple solution resulted. To this solution, and with external cooling (acetone/wet ice), was charged 162 ml of a 30% solution of hydrogen peroxide over a period of about 20 minutes. The reaction temperature never rose above 45C throughout the addition. After addition was complete, the reaction mixture was heated for 2 hours and was then cooled to room temperature. This mixture was then carefully quenched into a solution of 6N HCl (200 ml) in a 5 liter flask. The temperature stayed at about 15-20C throughout the addition. A 5 liter flask was used because of extensive foaming during the quench. The pH of the quench mixture was adjusted from about 5.0 to about 1.0 with concentrated hydrochloric acid as precipitation of the product caused stirring to slow down. To the reaction mixture was then added 260 ml of 50% NaOH solution to bring the pH up to 4.50. The mixture was filtered and the solids were sucked dry. The product was then dried in an oven at 40C and reduced pressure to obtain 95 g of the title compound, m.p. 180-181C. NMR(CDCl3 300 MHz): 7.56 (1H,dd,J=8 Hz, J=7 Hz), 6.68 (1H,dd,J=8 Hz, J=7 Hz).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 774-47-0, its application will become more common.

Reference:
Patent; PFIZER INC.; EP342849; (1990); A3;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 2058-72-2,Some common heterocyclic compound, 2058-72-2, name is 5-Bromo-1-methylindoline-2,3-dione, molecular formula is C9H6BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A solution of isatins 1 (0.6 mmol), 3-methyl-4-nitro-5-isatylidenylisoxazoles 2 (0.4 mmol) and proline or thioproline (0.8 mmol) in the 10.0 mL of EtOH at reflux for 5 h. After completion of the reaction, as indicated by TLC, the reaction mixture was directly subjected to flash column chromatography on silica gel (petroleum ether/EtOAc = 5:1-3:1) to furnish the corresponding products 3.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromo-1-methylindoline-2,3-dione, its application will become more common.

Reference:
Article; Lin, Bing; Zhang, Wen-Hui; Wang, Dan-Dan; Gong, Yi; Wei, Qi-Di; Liu, Xiong-Li; Feng, Ting-Ting; Zhou, Ying; Yuan, Wei-Cheng; Tetrahedron; vol. 73; 34; (2017); p. 5176 – 5188;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 611-09-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 611-09-6, name is 5-Nitroindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of substituted isatins (1 mmol),cyclic 1,3-diketone (1 mmol), malononitrile (1 mmol)and nano Ag/kaolin (0.085 g, 7 mol%) in EtOH (10mL) was stirred at reflux temperature. Uponcompletion instead of compilation, monitored by TLC(n-hexane/ethyl acetate: 2/1), the reaction mixture wasallowed to cool to room temperature. The catalyst wasseparated by filtration of this solution. The solution wasconcentrated under vacuum to afford the product,which was purified by recrystallization in the ethanol.All the products were identified by comparing of meltingpoint and 1H NMR spectra with those of authenticsamples reported in the literature.2- Amino -5′ – Nitro -2 ‘ , 5- Ioxo -5 , 6 , 7 , 8 -Tetrahydrospiro[Chrom-ene-4,3’-Indoline]-3-Carbonitrile (4c).m.p. 283-285 C; 1H NMR (400 MHz,DMSO-d6) : 1.79 -2.02 (m, 2H, CH2), 2.22-2.26 (m,2H, CH2), 2.62-2.69 (m, 2H, CH2), 7.03 (d, J=8.6Hz, 1H), 7.40 (brs, 2H, NH2), 7.87 (s, 1H, ArH), 8.13(d, J= 6.22 Hz, 1H, ArH), 11.17 (s, 1H, NH).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Nitroindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Sadeghi, Bahareh; Lasemi, Zahra; Azimi, Razieh; Oriental Journal of Chemistry; vol. 31; 2; (2015); p. 1175 – 1179;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 5394-18-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 5394-18-3 name is 2-(4-Bromobutyl)isoindoline-1,3-dione, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: Chemistry. Compounds 4-10 were synthesized following methodologies previously reported and the analytical and structural data was in agreement with formerly published data.1, 2 Briefly, 4,7-dichloroquinoline or 4-chloropyridine, respectively, was reacted at 100 ºC for 2 to 3 h with 10 molar equivalents (eq) of the respective diaminoalkane to afford the resultant amine; the reaction mixture was then brought to room temperature and diluted with dichlorometane (DCM), and the solution washed with 5% aqueous Na2CO3. The organic layer was isolated and dried over anhydrous Na2SO4, filtered, and the filtrate evaporated to dryness. In the case of the morpholine derivative, 2 eq of morpholine were reacted with 1 eq of 1-(N-phthaloyl)amino-4-bromobutane for 1 day to yield N-(N-phthaloyl)aminobutylmorpholine; after the previously described extraction process, the phthalimide group of the latter compound was removed with hydrazine in ethanol to afford the desired amine. Following, the respective cinnamic acid was activated in N,N-dimethylformamide (DMF), using 2 eq of O-(benzotriazol-1-yl)-N,N,N’,N’-tetramethyluronium tetrafluoroborate and 2 eq of N,N-diethyl-N-isopropylamine (DIEA) at 0 oC for 10 min. Subsequently, the corresponding amine was added and the mixture was left to react for 1 day. The mixture was then diluted in DCM, washed with 5% aqueous Na2CO3 and the organic layer collected, dried over Na2SO4, filtered, and the filtrate evaporated to dryness. The crude product was further purified by column liquid chromatography on silica, using a mixture of ethyl acetate and methanol (8:2 v/v) as eluent.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-(4-Bromobutyl)isoindoline-1,3-dione, and friends who are interested can also refer to it.

Reference:
Article; Perez, Bianca C.; Fernandes, Iva; Mateus, Nuno; Teixeira, Catia; Gomes, Paula; Bioorganic and Medicinal Chemistry Letters; vol. 23; 24; (2013); p. 6769 – 6772;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 496-12-8, name is Isoindoline, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 496-12-8, Computed Properties of C8H9N

Will Isoindoline (58 muL, 0.5 mmol),And a stirrer is placed in the reaction tube,After replacing the inert gas,DMF (193 muL, 2.5 mmol) was added, and the reaction tube was sealed.The reaction tube was placed in a 150 C oil bath reactor and the reaction was stirred for 96 hours.After cooling to room temperature, it was diluted with 15 mL of water and extracted with ethyl acetate three times, 15 mL each time.The combined extracts were dried over anhydrous sodium sulfate and filtered, and the filtrate was concentrated under reduced pressure, and the crude product was subjected to column chromatography with ethyl acetate: petroleum ether = 1:3 (1% triethylamine) as eluent. Get pure.Black oily liquid with a yield of 80%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Isoindoline, and friends who are interested can also refer to it.

Reference:
Patent; Xiangtan University; Gong Xing; Yin Jiawen; Cai Changqun; (15 pag.)CN109293569; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 19727-83-4, name is 6-Nitroindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Product Details of 19727-83-4

EXAMPLE 128 Step A-Preparation of 1-(1-methyl(4-piperidyl))-6-nitroindoline 6-Nitroindoline (5 g) was dissolved in 200 mL of dichloroethane, N-methyl-4-piperidone (5 g) was added to the mixture, followed by 12 g NaBH(OAc)3 and 1 mL of glacial AcOH. The mixture was stirred at RT overnight. Saturated NaHCO3 solution (200 mL) was added to the reaction mixture and stirred for 1 h. The resulting mixture was separated by separation funnel, the organic layer was extracted once with saturated NaHCO3 solution and once with brine. The resulting organic layer was dried over MgSO4, filtered and concentrated in vacuo. The crude material was purified by flash chromatography on silica gel with 2:1 EtOAc:MeOH to afford an orange oil. MS: 262 (M+1). Calc’d. for C14H19N3O2-261.32.

The synthetic route of 19727-83-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Chen, Guoqing; Adams, Jeffrey; Bemis, Jean; Booker, Shon; Cai, Guolin; Pietro, Lucian Di; Dominguez, Celia; Elbaum, Daniel; Germain, Julie; Geuns-Meyer, Stephanie; Handley, Michael; Huang, Qi; Kim, Joseph L.; Kim, Tae-Seong; Kiselyov, Alexander; Ouyang, Xiaohu; Patel, Vinod F.; Smith, Leon M.; Stec, Markian; Tasker, Andrew; Xi, Ning; Xu, Shimin; Yuan, Chester Chenguang; Croghan, Michael; US2003/125339; (2003); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem