Author: Jessica.F

Some common heterocyclic compound, 20780-72-7, name is 4-Bromoisatin, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 4-Bromoisatin

General procedure: To mixture of isatins (1 mmol), malononitrile (1 mmol), and dimedone or 4-hydroxycoumarin or barbituric acids (1 mmol) in ethanol (4 mL), 5mg of Fe3O4APTPOSS MNPs added as the catalyst, and the mixture was stirred for an appropriate time at room temperature (Table 2). The reaction was monitored by TLC. After completion of the reaction, precipitate was filtered and dried in a drying oven to furnish 2-aminopyrano-3-carbonitriles.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 20780-72-7, its application will become more common.

Reference:
Article; Safaei-Ghomi, Javad; Nazemzadeh, Seyed Hadi; Shahbazi-Alavi, Hossein; Catalysis Communications; vol. 86; (2016); p. 14 – 18;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 912999-79-2, name is 5-Chloroisoindoline hydrochloride, molecular formula is C8H9Cl2N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 912999-79-2

A mixture of Compound 151A (340 mg, 2.36 mmol) and 1-(azidomethyl)-4- methoxybenzene (500 mg, 3.07 mmol) in toluene (15 mL) was stirred at 110 C for 48 hours. The reaction mixture was concentrated and purified by column chromatography on silica gel using ethyl acetate- hexane as eluent to afford a Mixture 151B. LC-MS (ESI) m/z: 278 [M+H]._A Mixture 151B (60 mg, 0.217 mmol) and thionyl chloride (0.45 mL) in methylene chloride (10 mL) was stirred at 50 C for 5 hours. The reaction mixture was concentrated to give isic, which was used directly in the next step without further purification.LC-MS (ESI) m/z: 296 [M+H]._ A Mixture 151C (74 mg, 0.2 17 mmol), 5-chloroisoindoline (38 mg, 0.248 mmol), and K2C03 (60 mg, 0.43 5 mmol) in DMF (6 mL) was stirred at 60 C for 5 hours. The mixture was poured into water (100 mL) and extracted with ethyl acetate (100 mL x 3). The combined extracts were washed with brine (200 mL), dried over anhydrous sodium sulfate, filtered, and concentrated. The residue was purified with preparative HPLC to afford a Mixture 151D. LCMS (ESI) m/z: 413 [M+H]t

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 912999-79-2, its application will become more common.

Reference:
Patent; BIOMARIN PHARMACEUTICAL INC.; WANG, Bing; CHAO, Qi; (737 pag.)WO2019/133770; (2019); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 21857-45-4, name is 5-Methoxyindoline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 21857-45-4

To a solution of 5-methoxyindoline (175 mg, 1.17 mmol) in 3.6 mL of dry N,N-dimethylformamide was added sodium hydride (55%, 70 mg, 1.6 mmol) at 0 C. After the reaction mixture was stirred at the same temperature for 30 min, (2-bromoethyl)benzene (0.22 mL, 1.6 mmol) was added with additional stirring at room temperature overnight. After the reaction mixture was quenched with water at 0 C., the solution was extracted with diethyl ether (20 mL) twice. The combined extracts were washed with brine, and dried over MgSO4. After filtration, the filtrate was concentrated in vacuo, and the residue was purified by silica gel column chromatography (hexane/ethyl acetate=95/5 to 85/15) to obtain 5-methoxy-1-phenethylindole (95 mg, 32%).

The synthetic route of 5-Methoxyindoline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TOKYO INSTITUTE OF TECHNOLOGY; KYOTO UNIVERSITY; US2011/294850; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 25369-33-9 as follows. name: 7-Chloroindolin-2-one

To a suspension of AlCl3 (13.4 g, 0.10 mol) in methylene chloride (40 mL) is added a solution of 7-Chlorooxindole (0.10 mol) and chloroacetyl chloride (8 mL, 0.10 mol) at 0 C. The solution is warmed to ambient temperature for two hours and poured onto ice and extracted with methylene chloride, washing with saturated bicarbonate solution, brine, and drying over MgSO4 would provide the desired chloroketone.

According to the analysis of related databases, 25369-33-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Wittman, Mark D.; Balasubramanian, Neelakantan; Velaparthi, Upender; Zimmermann, Kurt; Saulnier, Mark G.; Liu, Peiying; Sang, Xiaopeng; Frennesson, David B.; Stoffan, Karen M.; Tarrant, James G.; Marinier, Anne; Roy, Stephan; US2004/44203; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 141452-01-9, These common heterocyclic compound, 141452-01-9, name is Methyl indoline-5-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 17 (0.28 g, 1.58 mmol) in pyridine (2 mL) was added 4-methoxybenzenesulfonyl chloride (0.32 g, 1.58 mmol) and heated to reflux for 6 h. The reaction mixture was purified by chromatography over silica gel to afford 18c as a white solid (85% yield; 1:1 EtOAc/n-hexane): 1H NMR (300 MHz, CDCl3) delta 2.96 (t, J=8.7 Hz, 2H), 3.80 (s, 3H), 3.85 (s, 3H), 3.93 (t, J=8.7 Hz, 2H), 6.89 (d, J=8.7 Hz, 2H), 7.62 (d, J=8.4 Hz, 1H), 7.20-7.76 (m, 3H), 7.88 (d, J=8.4 Hz, 1H).

Statistics shows that Methyl indoline-5-carboxylate is playing an increasingly important role. we look forward to future research findings about 141452-01-9.

Reference:
Patent; Taipei Medical University; Liou, Jing-Ping; Lin, Chien-Huang; Pan, Shiow-Lin; Yang, Chia-Ron; Teng, Che-Ming; US2015/368195; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 611-09-6,Some common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, molecular formula is C8H4N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of malononitrile (1 mmol), isatin (1 mmol), dicarbonyl (1 mmol), PEGOSO3H(0.1 mmol), and water (2 mL) was stirred under reflux for the appropriate time (shown in Tables 3, 4). After completion of the reaction, the reaction mixture was filtered and the residue was washed with ethanol. The crude solid product was recrystallized from EtOH to afforded the pure products in high purity and yield.Assignment of the structures of the products was based on their 1H NMR, 13C NMR,and IR spectra.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Nitroindoline-2,3-dione, its application will become more common.

Reference:
Article; Nasseri; Zakerinasab; Research on Chemical Intermediates; vol. 41; 8; (2015); p. 5261 – 5270;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 1074-82-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1074-82-4 as follows.

Into a reaction vessel were put potassium phthalimide (5.00g, 27.0mmol), benzyltrimethylammonium chloride (0.50g, 2.70mmol) and tert -buyl alcohol (50ml) and then thereto was added (S)-epichlorohydrin (6.53g, 54.0mmol). The mixture was stirred at 20C for 24 hours and the solvent was removed. To the residue was added ethyl acetate (30ml), the mixture was washed with water (20ml), and then ethyl acetate was removed to give crude (S)-glycidylphthalimide (3.95g, yield: 72%, optical purity: 97%e.e.) as a white solid.

According to the analysis of related databases, 1074-82-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; DAISO CO., LTD.; EP1403267; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

61-70-1, name is 1-Methylindolin-2-one, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 61-70-1

General procedure: An oven-dried reflux tube equipped with a magnetic stir bar and a Teflon stopcock was charged with aryl halide (1 mmol), oxindole (1 mmol),potassium carbonate (1.1 mmol), catalyst nanoparticles (0.05 mmol)and 1,4-dioxane (2 ml) and heated at 70 C. The mixture was vigorously stirred under these reaction conditions and completion of the reaction was monitored by TLC (EtOAc: n-hexane, 25:75). After completion of the reaction, the reaction mixture was cooled to room temperature, the magnetic nanoparticles of the catalyst were collected using a magnet. Ethyl acetate (5 mL) and water (10 mL)were added to the mixture in the next step. The aqueous layer was furtherextracted by ethyl acetate (2*5 mL). The combined organic layerswere washed with saturated brine, dried over CaCl2, filtered, and concentrated to give a residue which was purified by recrystallization from ethanol and water or by column chromatography on silica gelusing EtOAc: n-hexane, 1:7.

The synthetic route of 61-70-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Moghaddam, Firouz Matloubi; Tavakoli, Ghazal; Latifi, Fatemeh; Saeednia, Borna; Catalysis Communications; vol. 75; (2016); p. 37 – 41;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 317-20-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 317-20-4 name is 7-Fluoroisatin, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: In a 25 mL round bottom flask, isatins 1 (1 mmol), 3-phenylisoxazol-5(4H)-one 2 (1 mmol) or 3-ethylisoxazol-5(4H)-one 7 (1 mmol), pyrazol-5-amine 3 (1 mmol) or 6-aminopyrimidine-2,4-(1H,3H)-dione 5 (1 mmol), and Amberlyst-15 (100 mg) were stirred in CH3OH (5.0 mL) at 80 C. When the reaction was completed (detected by TLC), the spherical catalyst was separated by a sieve at once under hot condition. Then, the reaction mixture was cooled to room temperature, and solid precipitation occurred. After filtration, the crude product was recrystallized from EtOH and DMF to give pure compound.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 7-Fluoroisatin, and friends who are interested can also refer to it.

Reference:
Article; Niu, Qingqing; Xi, Junhua; Li, Lei; Li, Li; Pan, Chengli; Lan, Meijun; Rong, Liangce; Tetrahedron Letters; vol. 60; 43; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16800-68-3, name is 1-Acetylindolin-3-one, A new synthetic method of this compound is introduced below., SDS of cas: 16800-68-3

The N- acetyl-3-indolyl-one 1.75g (10mmol), 1,2- dimethyl-indole 1.35g (10mmol) and cuprous iodide 0.19g (1.0mmol) was dissolved in ethanol, was heated to 60 C after 12 hours the reaction, extracted with dichloromethane, the organic layers combined, dried over anhydrous sodium sulfate, dichloromethane / methanol to give a white solid product was recrystallized from N- acetyl -3- (indol-3-methyl-N- ) – indole (2.8g, yield 92%),

The synthetic route of 16800-68-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sun Yat-sen University; Weng, Jiang; Lu, Gui; Guo, Jing; (7 pag.)CN105669516; (2016); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem