Author: Jessica.F

Application of 39603-24-2, These common heterocyclic compound, 39603-24-2, name is 5,7-Dimethylindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: An equimolar mixture of dipolarophile 1/7 (1 mmol), isatin 2a-e/acenaphthenequinone 11 (1 mmol) and sarcosine 3/1,3-thiazolane-4-carboxylic acid 5 (1 mmol) in 2,2,2-trifluoroethanol (10 ml) was refluxed forthe appropriate time (30-40 min). After completion of the reaction asindicated by (TLC), the solid precipitates were filtered and washed withethanol to furnish pure corresponding dispiropyrrolidine/thiapyrrolizidinederivatives. Synthesized compounds were well characterized by 1H NMR, 13CNMR, Mass and single crystal X-ray analysis of representative compounds.

Statistics shows that 5,7-Dimethylindoline-2,3-dione is playing an increasingly important role. we look forward to future research findings about 39603-24-2.

Reference:
Article; Dandia, Anshu; Singh, Ruby; Khan, Shahnawaz; Kumari, Sukhbeer; Soni, Pragya; Tetrahedron Letters; vol. 56; 30; (2015); p. 4438 – 4444;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 5181-35-1,Some common heterocyclic compound, 5181-35-1, name is 2-(2-Bromoethoxy)isoindoline-1,3-dione, molecular formula is C10H8BrNO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a clean dry flask containing suspension of 2-(2-bromoethoxy)isoindoline- l,3-dione (30 g, 0.111 mol), 1H- 1,2,3 triazole (7.66 g, 111 mmol) in dimethylformamide (150 ml) was added cesium carbonate ((36 g, 111 mmol) portion wise at room temperature under stirring. After 17 hours, the reaction mixture was filtered and filtrate was slowly poured into chilled water (1050 ml) under stirring. After 30 minutes of stirring, the separated precipitates were collected by filtration and washed with water (100 ml). The collected precipitates were dried at 40 C for 2 hours under high vacuum to obtain 18.5 g of a mixture of 2-[2-(2H- l,2,3-triazol-2-yl)ethoxy]- lH-isoindole- l,3(2H)-dione and 2-[2- (lH- l,2,3-triazol- l-yl)ethoxy]- lH-isoindole- l,3(2H)-dione as a white compound in 65% yield. Analysis: Mass: 259.2 (M+l); for Molecular weight: 258 and Molecular formula: C12H10N4O3; To a solution of mixture of 2-(2-(2H-l,2,3-triazol-2- yl)ethoxy)isoindoline-l,3-dione and 2-(2-(lH-l,2,3-triazol-l-yl)ethoxy)isoindoline-l,3-dione (13 g, 50.3 mmol, obtained from Step 1) in dichloromethane (130 ml) was added hydrazine hydrate (3.7 ml, 75.7 mmol) under stirring at room temperature. After 2 hours, the progress of reaction was monitored by thin layer chromatography using mixture of chloroform and methanol as solvent system. After completion of the reaction the unwanted solid was filtered out and washed with dichloromethane (25 ml). The collective filtrates were concentrated at 40 C under high vacuum to dryness to provide 6.5 g of a mixture of 2-[2-(aminooxy)ethyl]-2H-l,2,3-triazole and l-[2- (aminooxy)ethyl]-lH-l,2,3-triazole, which was used as such in the next step without any further purification; To a solution of sodium salt of (25,5 ?)-6-(benzyloxy)-7-oxo-l,6-diaza-bicyclo[3.2.1]octane-2-carboxylic acid (15 g, 54.3 mmol, prepared as per the procedure disclosed in International Patent Application No. PCT/IB2013/059264) in dimethylformamide (75 ml) was added EDC.HC1 (15.6 g, 81.6 mmol) at ambient temperature under stirring. Then N-methyl morpholine (16.5 ml, 0.150 moles) was added followed by HOBT (7.73 g, 50.7 mmol) and reaction mixture was stirred for 5 minutes at ambient temperature. To this reaction mixture was added a solution of mixture of 2-[2-(aminooxy)ethyl]- 2H-l,2,3-triazole and l-[2-(aminooxy)ethyl]-lH-l,2,3-triazole (6.5 g, product from Step 2) in dimethylformamide (6.5 ml) under stirring at 15 C and then allowed to attain room temperature. The progress of reaction was monitored by thin layer chromatography using mixture of chloroform and methanol (9: 1) as solvent system. After completion of the reaction (17 hours), the resulted reaction mixture was slowly poured into chilled water (500 ml) and extracted with ethyl acetate (2×150 ml). The combined organic layer was washed with brine (75 ml) and organic layer was dried over anhydrous sodium sulfate, concentrated on rotavapour to provide 17.5 g of crude compound. It was purified by column chromatography (silica gel 60-120 mesh) using mixture of hexane and acetone as an eluent. The upper spot containing fractions were collected at 30-40% concentration of acetone in hexane and concentrated to dryness under vacuum to provide7.5 g of (25,5 ?)-6-(benzyloxy)-7-oxo-N-[2-(2H-l,2,3-triazol-2-yl)ethoxy]-l,6-diazabicyclo [3.2.1]octane-2- carboxamide. Similarly lower spot containing fractions collected at 40-50% concentration of acetone in hexane were concentrated to dryness under vacuum to provide 5.2 g of of (25,5 ?)-6- (benzyloxy)-7-oxo-N-[2-(lH-l,2,3-triazol-l-yl)ethoxy]-l,6-diazabicyclo[3.2.1]octane-2- carboxamide. In total, 12.7 g was obtained in 70% yield. Analysis: Mass: 385.3 (M-l); for Molecular weight: 386 and Molecular formula: C18H22N6O4.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(2-Bromoethoxy)isoindoline-1,3-dione, its application will become more common.

Reference:
Patent; WOCKHARDT LIMITED; TADIPARTHI, Ravikumar; PATIL, Vijaykumar Jagdishwar; DEKHANE, Deepak; SHAIKH, Mohammad Usman; BIRAJDAR, Satish; DOND, Bharat; PATEL, Mahesh Vithalbhai; (100 pag.)WO2017/81615; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 868066-91-5, A common heterocyclic compound, 868066-91-5, name is 5-Bromo-2-methylisoindolin-1-one, molecular formula is C9H8BrNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Synthesis of 2-methyl-5-((9-((2-(trimethylsilyl)ethoxy)methyl)-9H-purin-6-yl)amino)isoindolin-1-one (4) Procedure A: A mixture of 9-((2-(trimethylsilyl)ethoxy)methyl)-9H-purin-6-amine (3, 0.10 g, 0.37 mmol), 5-bromo-2-methylisoindolin-1-one (2, 0.10 g, 0.45 mmol), sodium tert-butoxide (54 mg, 0.56 mmol) and XPhos (5 mg, 0.01 mmol) in toluene (10 mL) was degassed with argon for 30 min. Tris(dibenzylideneacetone)dipalladium(0) (20 mg, 0.022 mmol) was added under argon atmosphere and the reaction mixture was heated at 100° C. for 12 h. After completion of the reaction, the reaction mixture was filtered through celite pad and the filtrate was concentrated. The crude residue was purified by silica gel column chromatography using 0-10percent ethyl acetate in hexanes as eluent to afford 2-methyl-5-((9-((2-(trimethylsilyl)ethoxy)methyl)-9H-purin-6-yl)amino)isoindolin-1-one (4). Yield: 0.11 g, 71percent; MS (ESI) m/z 411 [M+1]+.

The synthetic route of 868066-91-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; eFFECTOR Therapeutics, Inc.; Sprengeler, Paul A.; Reich, Siegfried H.; Ernst, Justin T.; Webber, Stephen E.; Shaghafi, Mike; Murphy, Douglas; Tran, Chinh; (131 pag.)US10112955; (2018); B2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6941-75-9, name is 5-Bromoisoindoline-1,3-dione, This compound has unique chemical properties. The synthetic route is as follows., category: indolines-derivatives

280 ml of 1M Borane-THF complex was added dropwise to a stirred solution of 4-bromophthalimide (20.85 g; 92.2 mmol) in anhydrous THF (200 ml) at O0C then heated at reflux overnight. The reaction was cooled to 00C then treated cautiously with methanol (100 ml) followed by 2M HCI (100 ml) then heated at reflux for 3 hours. The reaction mixture was cooled and the organics evaporated. The aqueous was diluted with water (100 ml) the extracted with DCM (x3). The aqueous was basified with 2M NaOH then extracted with DCM (x3). The combined DCM extracts were dried (MgSO4), filtered and evaporated to give 6.99 g of 5-bromo-2,3-dihydro-1 H-isoindole as a dark brown gummy solid. 1H NMR (DMSO-d6) 7.45 (1 H, s), 7.36 (1H, d), 7.20 (1H, d), 4.05 (4H, s).

According to the analysis of related databases, 6941-75-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; WO2008/44041; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1914-02-9, name is 3,3-Dimethylindoline, A new synthetic method of this compound is introduced below., COA of Formula: C10H13N

General procedure: A mixture of 24.5 mg (0.18 mmol) 1,2,3,4-tetrahydroquinoline, 37.3 mg (0.188 mmol) 1-adamatanecarbonyl chloride and 44.4 mg (0.34 mmol) DIPEA in 1 mL DCM was shaken at room temperature for 4 h. The mixture was evaporated, dissolved in DMF and subjected to column chromatography on reversed phase eluting with a gradient formed from acetonitrile, water and formic acid to yield after evaporation of the product containing fractions 34.9 mg (64%) of the title compound as white solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Nettekoven, Matthias; Fingerle, Juergen; Grether, Uwe; Gruener, Sabine; Kimbara, Atsushi; Puellmann, Bernd; Rogers-Evans, Mark; Roever, Stephan; Schuler, Franz; Schulz-Gasch, Tanja; Ullmer, Christoph; Bioorganic and Medicinal Chemistry Letters; vol. 23; 5; (2013); p. 1177 – 1181;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 1914-02-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1914-02-9, name is 3,3-Dimethylindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 3; Preparation of 3, 3-dimethylindoline HCI salt; [0066]HCI 1.3 eq.[0067] The resulting mixture from Example 1 was treated with a slow addition of a solution ofNaBH4 (84 g) in 400 mL DI basified with 5N NaOH (pH~13) water in 3h at a temperature below 10 0C, then warmed to about room temperature. The reaction was worked up by adjusting pH to 8 with 14.5N NH4OH and the phases were then separated. The aqueous phase was extracted with IPAC (300 mL x 2). The combined organic phase was washed with DI water (80 mL) and saturated brine (80 mL) to give the corresponding indoline solution (containing 231 g of 3, 3-dimethylindoline, 85% assay yield.) [0068] To this indoline solution (in heptane/IPAC) was added 194 mL propan-2-ol, followed by the addition of 5 N HCl in IPA (408 mL) to form a suspension, which was stirred for 2h before filtration. The wet cake was then washed with heptane (100 mL x2) to afford the 3,3-dimethylindoline HCl salt. (255.6 g, 75.5% yield, 98.4 A% for the HCl salt).

The synthetic route of 3,3-Dimethylindoline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AMGEN INC.; KING, Anthony; LARSEN, Robert; LI, Tj; LU, Yuelie; WO2010/71828; (2010); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 20870-79-5, name is 5-Nitroindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Safety of 5-Nitroindolin-2-one

General procedure: A reaction mixture of compound 19-21 (2.35 mmol),compound 14-18 (2.14 mmol) and 2 drops of piperidine was stirred at RT for 3 h. The precipitate was filtered off and dried. The crude compound was purified by column chromatography using ethyl acetate in dichloromethane (13%) to afford the desired products (4, 22-32).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 20870-79-5.

Reference:
Article; Dai, Hou-Ling; Gao, Li-Xin; Yang, Ying; Li, Jing-Ya; Cheng, Jia-Gao; Li, Jia; Wen, Ren; Peng, Yan-Qing; Zheng, Jian-Bin; Bioorganic and Medicinal Chemistry Letters; vol. 22; 24; (2012); p. 7440 – 7443;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 18711-13-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 18711-13-2, name is 4,7-Dichloroindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows.

In these schemes, ketone (4.0 equiv.) and a catalytic amount of diethylamine (10 drops) are added to a solution of substituted isatin (1.0 equiv.) in methanol (5 mL). The mixture is stirred at room temperature until starting material (substituted isatin) disappears completely. The resulting solution is concentrated and applied to flash chromatography eluting with hexane / ethyl acetate to afford pure product in quantitative yield. Further purification is done by recrystallization with hexane / ethyl acetate. An example compound synthesized by the above scheme includes: 4,7-Dichloro-3- hydroxy-3-[2-(4-methoxyphenyl-2-oxoethyl)]-l,3-dihydroindol-2-one: white solid; mp 149- 151 C; 1H NMR (DMSO, 400 MH 1 z) delta 10.93 (s, 1H), 7.86 (d, 2H, J = 9.2 Hz), 7.26 (d, 1H, J = 8.8 Hz), 6.98 (d, 2H, J= 8.8 Hz), 6.86 (d, 1H, J = 8.4 Hz), 6.39 (s, 1H), 4.31 (d, 1H, J= 18.0 Hz), 3.80 (s, 3H), 3.61 (d, 1H, J= 18.0 Hz).

The chemical industry reduces the impact on the environment during synthesis 4,7-Dichloroindoline-2,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Patent; TOKALAS, INC.; VERNIER, Jean-michael; (82 pag.)WO2016/57698; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 24566-79-8, name is N-(6-Bromohexyl)phthalimide, A new synthetic method of this compound is introduced below., Formula: C14H16BrNO2

To the 500 ml RB-flask was added 4-phenylpiperidine hydrochloride (5 g, 25 mmol), N-(6-bromohexyl)phthalimide (15.5 g, 50 mmol), N,N-diisopropylethylamine (21.8 ml, 125 mmol), tetrabutylammonium iodide (0.2 g), and dioxane (250 ml) at room temperature. The reaction mixture was stirred at 100 C. for 72 h. The solvent was removed in vacuo and the crude product was purified by flash chromatography (98:2=Chloroform:2N ammonia in methanol) to afford 7.67 g of the desired product (77% yield): 1H NMR (400 MHz, CDCl3) delta 7.78-7.79 (m, 2H), 7.74-7.65 (m, 2H), 7.32-7.14 (m, 5H), 3.69 (t, 2H, J=7.35 Hz), 3.06 (d, 2H, J=11.0 Hz), 2.49 (quintet, 1H, J=7.6 Hz), 2.36 (t, 2H, J=7.6 Hz), 2.02 (t, 2H, J=12.5 Hz), 1.82 (br s, 4H), 1.69 (t, 2H, J=6.3 Hz), 1.54 (br s, 2H), 1.37 (br s, 4H); ESMS m/e: 391.3 (M+H)+; Anal. Calc. for C25H30N2O2+0.2H2O: C, 76.19; H, 7.77; N, 7.11. Found: C, 76.14; H, 7.38; N, 7.13.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Synaptic Pharmaceutical Corporation; US6727264; (2004); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 59-48-3, name is Indolin-2-one, molecular formula is C8H7NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of Indolin-2-one

Step 1 Oxindole (20.0 g; 0.15 mol) and lithium chloride (21.0 g; 0.49 mol) were suspended in tetrahydrofuran (400 mL) and the mixture cooled to -78° C. n-Butyllithium (120.0 mL; 0.30 mol, 2.5M in hexanes) was added slowly and the mixture was stirred for 20 minutes, then iodomethane (18.7 mL; 0.30 mol) was added. The mixture was warmed to 25° C., stirred overnight and then quenched with saturated aqueous ammonium chloride and diluted with diethyl ether. The organic layer was washed with water and brine, dried over magnesium sulfate, filtered and concentrated under reduced pressure. Purification by flash chromatography (0-20percent ethyl acetate-hexane) afforded 10.0 g (41percent) of 3,3-dimethyl-1,3-dihydro-indol-2-one as a yellow solid. MS (ESI) m/z 162 ([M+H]+).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 59-48-3, its application will become more common.

Reference:
Patent; Wyeth; US2007/72897; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem