Author: Jessica.F

Related Products of 59-48-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 59-48-3 name is Indolin-2-one, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A stirred mixture of sodium hydride (60%, 31g, 0.79 mol) in dry xylene (500 mL), under a nitrogen atmosphere, was heated to reflux for 30 min. l,3-Dihydro-indol-2-one 16a (100 g, 0.75 mol) was then slowly added via an addition funnel and stirred at reflux for 1.5 hrs. Dimethyl sulfate (104 g, 0.83 mol) was added drop-wise, whereupon the resulting homogeneous solution was refluxed for an additional 2 hrs. After cooling to room temperature, the reaction mixture was washed with water, dried over Na2SC>4, and concentrated under reduced pressure to afford l-methyl-l,3-dihydro-indol-2-one 16b (74 g, 67.3%). .HNMR (300 MHz, CDC13) 5 7.23-7.31 (m, 2 H), 7.04 (t, J= 7.5 Hz, 1 H), 6.82 (d, J= 7.8 Hz, 1 H), 3.52 (s, 2 H), 3.21 (s, 3 H).[0270] A suspension of NaH (60%, 70 g, 0.48 mol) in THF (300 mL) was stirred for 10 min at 0 C. Then a solution of l-methyl-l,3-dihydro-indol-2-one 16b (70 g, 2.88 mol) in THF (200 mL) was added at 0 C, and the mixture was stirred for 1 h at room temperature. Benzyl-bis-(2-chloro-ethyl)-amine (129 g, 0.48 mol) was added in portions at 0 C. The mixture was stirred overnight at room temperature, and then was poured into ice-water, extracted with EtOAc. The combined organic layers were dried over IS^SO^ and concentrated under reduced pressure. The residue was purified by column on silica gel (P.E./E.A. 2:1) to give compound 16c (24 g, 16.3%). lH NMR (300 MHz, CDCI3) 5 7.25-7.42 (m, 7 H), 7.02-7.07 (m, 1 H), 6.83 (d, J= 7.5, 1 H), 3.68 (s, 2 H), 3.19 (s, 3 H), 2.74-2.99 (m, 2 H), 2.66-2.72 (m, 2 H), 1.93-2.01 (m, 2 H), 1.79-1.85 (m, 2 H).[0271] To a solution of compound 16c (12 g, 39.2 mmol) in MeOH (100 mL) was added Pd(OH)2/C (1.5 g, 20%>) under N2. The suspension was hydrogenated under H2 (50 psi) at room temperature for 4.5 hrs. The catalyst was filtered off, and the filtrate was concentrated under reduced pressure to give the deprotected spiroindolone product 16d (8 g, 94.5%). ]H NMR (400 MHz, DMSO-rf6) 5 7.46 (d, J= 7.2,1 H), 7.23-7.27 (m, 1 H), 6.96-7.03 (m, 2 H), 3.04-3.14 (m, 5 H), 2.83-2.89 (m, 2 H), 1.61-1.67 (m, 2 H), 1.45-1.51 (m, 2 H). MS (ESI) m/z 217.1 [M+H]+ [0272] 1.0 eq of deprotected spiroindolone 16d (22 mg, 0.10 mmol) was dissolved in anhydrous l,2-dichloroethane:l,2-dimethoxyethane (1.0 mL, 1:1 v/v) and treated with 1.5 N-Carbethoxy-4-tropinone (30 mg, 0.15 mmol), followed by titanium tetraisopropoxide (88 /xL, 85 mg, 0.30mmol). The vial was flushed with nitrogen and stirred at room temperature ~70 h. The reactionwas then diluted with methanol (1.0 mL), cooled in an ice-BbO bath and treated with sodiumborohydride (8 mg, 0.20 mmol). After warming to room temperature and stirring for 90 min, thereaction was further diluted with methanol (2.0 mL), quenched with 1.0 N NaOH (500 juL) andstirred vigorously at room temperature for 10 min. The suspension obtained was centrifuged(3K rpm, 10 min) and the supernatant concentrated under reduced pressure. The residueobtained was dissolved in MeOH:acetonitrile (1250 fiL, 1:1 v/v), filtered, and purified byreverse-phase HPLC (2-40% CH3CN/0.1% TFA gradient over 10 min) to yield productcompound no. 149. LC/MS (10-99%) m/z [M+H]+398.2, retention time 1.93 min.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Indolin-2-one, and friends who are interested can also refer to it.

Reference:
Patent; VERTEX PHARMACEUTICALS, INCORPORATED; WO2006/23852; (2006); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 20876-36-2, name is 5-Aminoindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 5-Aminoindolin-2-one

Preparation of 5-(4-Chloro-5-trifluoromethyl-pyrimidin-2-ylamino)-1,3-dihydro-indol-2-one (4) To a solution of 5-trifluoromethyl-2,4-dichloropyrimidine (214.8 g; 0.921 mol) in 1:1 DCE/tBuOH (1.240 L) was added Zinc chloride 1M solution in ether (1 eq; 0.921 L). After 0.5 hour, 5-amino-oxindole (124 g; 0.837 mol) was added followed by triethylamine (129.4 ml; 0.921 mol) keeping temperature at 25° C. The reaction was allowed to stir at room temperature overnight, then was concentrated and the product triturated from methanol as a yellow solid (224.3 g; 82percent). 1H NMR (DMSO-d6, 400 MHz) .box. 3.29 (s, 2H), 6.76 (d, J=7.9 Hz, 2H), 7.39 (d, J=8.3 Hz), 7.51 (br s, 1H), 8.71 (s, 1H), 10.33 (s, 1H), 10.49 (s, 1H), 13C NMR (DMSO-d6, 100 MHz) .box. 177.0, 161.3, 158.7 (br), 140.7, 132.8, 126.9, 123.7 (q, J=268 Hz), 121.0, 118.7, 111.2 (q, J=32 Hz), 109.6, 36.7; HPLC ret. time: 5.759 min. LRMS (M+) 329.1, 331.1.

The synthetic route of 20876-36-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Pfizer Inc; US2005/256145; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 552330-86-6, name is 5-Bromoisoindolin-1-one, molecular formula is C8H6BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C8H6BrNO

Step 3: 5-(4,4,5,5-Tetramethyl-[1,3,2]dioxaborolan-2-yl)-2,3-dihydro-isoindol-1-one 5-Bromo-2,3-dihydro-isoindol-1-one (230 mg, 1.08 mmol), bis(pinacolato)diboron (300 mg, 1.18 mmol), PdCl2dppf (25 mg, 31 mumol) and KOAc (320 mg, 3.26 mmol) are suspended in dioxane (4 ml), purged with nitrogen for 5 minutes and then heated at 85 C. overnight. The solvent is removed in vacuo and the residue partitioned between ethyl acetate and water. The aqueous layer is extracted three times with ethyl acetate and the combined organic phases are washed once with brine, filtered through anhydrous MgSO4 and evaporated. The solid residue is triturated with hexane and dried in vacuo to furnish the title compound (185 mg, 66%) as a grey solid. 1H-NMR (400 MHz, CDCl3) delta (ppm) 1.37 (s, 12H, 4*CH3), 4.45 (s, 2H, CH2), 6.38 (bs, 1H, NH), 7.87 (d, 1H, H), 7.93 (m, 2H, H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 552330-86-6, its application will become more common.

Reference:
Patent; Andrews, Martin James Inglis; Chambers, Mark Stuart; Van De Poel, Herve; Bar, Gregory Louis Joseph; US2009/286798; (2009); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 169037-23-4, These common heterocyclic compound, 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of indoline-2,3-dione 1 (1mmol), l-tryptophan (2a) or l-histidine 2b (1mmol) and (E)-(2-nitrovinyl)benzene 3 (1.1mmol) was heated while stirred in [bmim]Br as the reaction medium (3mL) for 1hat 100C. After completion of the reaction (TLC), EtOAc (5mL) was added and the reaction mixture was stirred for 10min. This treatment was repeated and the combined ethyl acetate layers were removed in vacuo. The crude product was purified by recrystallization of the residue from EtOH (compounds 4) or by column chromatography (compounds 5). After extraction of the product, the ionic liquid was dried under vacuum at 80C for 2h to eliminate any water and could be reused for subsequent runs of the reaction.

The synthetic route of 169037-23-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Arumugam, Natarajan; Almansour, Abdulrahman I.; Kumar, Raju Suresh; Periasamy, Vaiyapuri Subbarayan; Athinarayanan, Jegan; Alshatwi, Ali A.; Govindasami, Periyasami; Altaf, Mohammad; Menendez, J. Carlos; Tetrahedron; vol. 74; 38; (2018); p. 5358 – 5366;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

39603-24-2, name is 5,7-Dimethylindoline-2,3-dione, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Computed Properties of C10H9NO2

General procedure: Isatin 1 (3 mmol), 0.198 g malononitrile (3 mmol),0.420 g dimedone (3 mmol), and 0.025 g sodium acetate(0.3 mmol) were grinded with the pestle in mortar atambient temperature for 15 min. The resulting mixture wasair dried. Crude solid was then put on filter, rinsed withwater (2 9 2 cm3), and dried with water pump.

The synthetic route of 39603-24-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Elinson, Michail N.; Ryzhkov, Fedor V.; Zaimovskaya, Tatiana A.; Egorov, Mikhail P.; Monatshefte fur Chemie; vol. 147; 4; (2016); p. 755 – 760;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 101207-45-8,Some common heterocyclic compound, 101207-45-8, name is 2-(4-Methylbenzyl)isoindoline-1,3-dione, molecular formula is C16H13NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Add 251 mg of 2- (4-methylbenzyl) isoindolin-1,3-dione (1 mmol), 12 mg of potassium methoxide to a glass test tube with magnetons, add 2 ml of isopropanol under nitrogen protection, add 2 microliters of 0.01M catalyst (S / C = 50,000), filled with 4 MPa hydrogen, and reacted at 40 C for 24 hours. After the reaction, the reaction mixture was naturally cooled to room temperature, and the hydrogen gas was carefully released. The celite was filtered, and the organic solvent was removed from the filtrate to obtain 249 mg of the product in a yield of 98%

The synthetic route of 101207-45-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; South University of Science and Technology of China; Ma Baode; Shao Panlin; Wu Chao; Wang Jiang; Zhang Xumu; (12 pag.)CN110746342; (2020); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 446292-08-6, name is (S)-2-((2-Oxo-3-(4-(3-oxomorpholino)phenyl)oxazolidin-5-yl)methyl)isoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 446292-08-6, category: indolines-derivatives

Reference example 3: Synthesis of (S)-4-{4-[5-(aminomethyl)-2-oxo-l,3-oxazolidin- 3-yl]phenyl}morpholin-3-one hydrochloride (compound IV-hydrochloride)26.00 g (79.3 mmol) of (5)-2-({2-oxo-3-[4-(3-oxomorpholin-4-yl)phenyl]-l,3- oxazolidin-5-yl}methyl)-lH-isoindole-l,3(2H)-dione (compound III, obtained from compound II following the process disclosed in the ‘ 823 patent) were suspended in 95.0 mL of ethanol. 21.1 mL (271.6 mmol) of 40% w/w aqueous methylamine were added to the suspension, and the resulting mixture was heated to 60-63 C and maintained at this temperature for about 2 hours. The content of unreacted compound III was checked to be below 5% by TLC. After cooling to 55-60 C, a total of 31.45 g (172.3 mmol) of 20% w/w aqueous hydrochloric acid were added over the reaction mixture until the pH was 2.65. Precipitation was observed during the addition. The resulting suspension was cooled down to 20 C and subsequently filtered. The collected solid was washed with1 5.0 mL of methanol to give 20.01 g of wet (,S)-4-{4-[5-(aminomethyl)-2-oxo-l,3- oxazolidin-3-yl]phenyl}morpholin-3-one hydrochloride as a white solid. After drying at 60 C, 17.49 g of dry product were obtained. Yield: 86.5%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (S)-2-((2-Oxo-3-(4-(3-oxomorpholino)phenyl)oxazolidin-5-yl)methyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MEDICHEM S.A.; MANGION, Bernardino; DURAN LOPEZ, Ernesto; WO2012/35057; (2012); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 239463-85-5, A common heterocyclic compound, 239463-85-5, name is (R)-3-(5-(2-Aminopropyl)-7-cyanoindolin-1-yl)propyl benzoate (2R,3R)-2,3-dihydroxysuccinate, molecular formula is C26H31N3O8, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

in a container having an inner volume of 5 E and equipped with a reflux condenser, a thermometer, and a stirrer, 317 g (0.62 moles) of 3-{5-[(2R)-2-aminopropyl]-7- cyano-2,3-dihydro-1H-indol-l-yl}propio benzoate.mono(2R,3R)-tartrate, 1.8 E of ethyl acetate, and 1280 g (1.83moles) of a 20% aqueous potassium carbonate solution were mixed and stirred at room temperature for 1 hout10108] After completion of the stirring, an organic phase was separated from the reaction liquid, and the obtained organic phase was concentrated under reduced pressure. The concentrate, 1.8 E of acetonitrile, 69 g (0.65 moles) of sodium carbonate, 10 g (0.03 moles) of tetrabutylammonium bromide, and 233 g (0.74 moles) of 2-[2-(2,2,2-trifluoroeth- oxy)phenoxy]ethyl methanesulfonate were mixed and subjected to reaction under stirring at 75 to 85 C. for 30 hours. 10109] After completion of the reaction, the reaction liquid was cooled to room temperature and then filtered, with the result that 2.2 kg of an acetonitrile solution of 3-(7-cyano- 5-[(2R)-2-({2-[2-(2,2,2-trifluoroethoxy)phenoxy]ethyl}amino)propyl] -2,3-dihydro-l H-indol-l -yl}propylbenzoate (content: 14.2 mass %, 0.53 moles) was obtained (yield: 85%).

The synthetic route of 239463-85-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; UBE INDUSTRIES, LTD.; MOTOYAMA, Takahiro; TAKATA, Katsunori; FUKUHARA, Yasuaki; UEMURA, Masato; SADO, Tatsunori; KASAI, Atsuyuki; (20 pag.)US2017/8842; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 356068-93-4,Some common heterocyclic compound, 356068-93-4, name is (Z)-5-((5-Fluoro-2-oxoindolin-3-ylidene)methyl)-2,4-dimethyl-1H-pyrrole-3-carboxylic acid, molecular formula is C16H13FN2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of compound 109 (0.5 g, 1.67 mmol) in THF(150 mL) at00C was added HOBt (0.34 g, 2.8 mmol), triethylamine (0.6 mL, 4.18 mmol),ECDI HCl (0.48 g, 2.8 mmol) and compound 202 (0.6 g, 3.33 mmol) successively. The mixture was stirred overnight at room temperature, evaporated to remove solvent, diluted with water (50 mL), brine (50 mL) and saturated sodium bicarbonate solution (50 mL). The pH of solution was adjusted to 11-12 with 1OM NaOH. The mixture was filtered, washed with water, dried to obtain crude yellow solid 203 (550 mg, 69%). LCMS: 478 [M+l]+, 1H NMR (DMSO-J6): delta 2.40 (s, 3H), 2.43 (s, 3H), 3.63 (m, 2H),3.82 (s, 3H), 4.20 (t,2H), 6.92 (m, 2H), 7.07 (d, 2H), 7.70 (m, 2H), 7.84(s, 1H),7 .91 (d, 2H), 10.88 (s, IH), 13.68 (s, IH).

The synthetic route of 356068-93-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CURIS, INC.; WO2008/33747; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, A new synthetic method of this compound is introduced below., Computed Properties of C9H7NO3

General procedure: A solution of 9a-d (2 mmol), EDCI (3 mmol) and HOBt (3 mmol) in dry DCM (20 mL) was stirred at 0C for 3.5 h. Then different substituted amines (2.2 mmol) and DIPEA (4 mmol) were added and the reaction was stirred at r.t. for another 1.5 h. The organic layer was washed with water and brine and dried over Na2SO4. Removal of the solvent gave a residue that was purified by column chromatography (silica gel, CH2Cl2-MeOH 100: 1 as an eluent) to furnish 10a-n as white solids.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Guo, Jing; Zhu, Mingyue; Wu, Tianxiao; Hao, Chenzhou; Wang, Kai; Yan, Zizheng; Huang, Wanxu; Wang, Jian; Zhao, Dongmei; Cheng, Maosheng; Bioorganic and Medicinal Chemistry; vol. 25; 13; (2017); p. 3500 – 3511;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem