Author: Jessica.F

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 675109-26-9, name is 6-Bromoisoindolin-1-one, A new synthetic method of this compound is introduced below., Computed Properties of C8H6BrNO

TDI01239-1 (500 mg, 2.358 mmol) was dissolved in tetrahydrofuran (24 mL), and cooled to 0 C. Under the protection of nitrogen, 60% NaH (236 mg, 5.895 mmol) was added to the above reaction solution, and the reaction was performed at room temperature for 1h after the addition. Bromoethyl acetate was then added at 0 C, and the reaction was continued at room temperature for 2h. LC-MS indicated the reaction was complete. After completion of the reaction, ice water and 1N HCl solution was added to quench the reaction, and the aqueous phase was extracted with ethyl acetate (15 mL). The combined organic phase was washed with saturated brine, dried over anhydrous sodium sulfate and concentrated to dryness to afford TDI01239-2 (700 mg, yellow solid, yield: 99.57%). MS m/z (ESI): 298.1 [M+H].

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Beijing Tide Pharmaceutical Co., Ltd.; Zhao, Yanping; Wang, Hongjun; Li, Gong; Jiang, Yuanyuan; Li, Xiang; Zhou, Liying; Liu, Yanan; (106 pag.)EP3421464; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, A new synthetic method of this compound is introduced below., HPLC of Formula: C9H4F3NO3

3beta-hydroxy-5alpha,8alpha-peroxyandrost-6-ene-17-hydrazine obtained in the step (f)(100 mg, 0.30 mmol) and 5-trifluoromethoxy-isatin (76.2 mg, 0.30 mmol) dissolved in 20 mLIn absolute ethanol, placed in a 50 mL single-necked flask, and the system was heated to 50 C for 2 to 4 hours.The reaction was terminated until no starting material was reacted. Decomposition under reduced pressure, purification by silica gel column,The product was obtained as a pale yellow solid, 114.2 mg, yield: 70%.

The synthetic route of 169037-23-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Qiqihar Medical University; Bu Ming; Wang Haijun; Wang Jing; Lin Yu; Li Hongling; Ma Yukun; (18 pag.)CN108707180; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 350797-56-7, name is 3-(7-Cyano-5-(2-nitropropyl)indolin-1-yl)propyl benzoate, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 350797-56-7, HPLC of Formula: C22H23N3O4

Procedure-2: To a stirring solution of 3-(7-Cyano-5-(2-nitropropyl)-indolin-l-yl)- propyl benzoate of Formula XII (10 g, 25.4mmol) in methanol (50 ml) was added con. HC1 (10 ml) followed by Zn (3.35 g, 50.08mmol). The mixture was heated to 60-65 C for 20 h. After completion of the reaction, the mixture was filtered and the residue was washed with Methanol (5 ml). The filtrate was concentrated under vacuum and the residue was dissolved in water and washed with isopropyl ether (2×20 ml). The MDC (80 ml) was added to the aqueous layer and basified the mixture by adding aqueous 20% NaOH solution. The obtained solid slurry mass was filtered and both the layers were separated from the filtrate. The organic layer was washed twice with water (2 x 100 ml) and concentrated under vacuum to get 8.5 g of 3-(5-(2-aminopropyl)-7- cyanoindolin-l-yl)propyl benzoate of Formula XII as a thick mass (HPLC purity is -abo-ve-95-%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-(7-Cyano-5-(2-nitropropyl)indolin-1-yl)propyl benzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; PANACEA BIOTEC LTD; JAIN, Rajesh; RAO, Jagadeeshwar R; RAO, Siripragada Mahender; WO2012/131710; (2012); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 20870-79-5, name is 5-Nitroindolin-2-one, A new synthetic method of this compound is introduced below., Quality Control of 5-Nitroindolin-2-one

Step-b: tert-butyl 5-nitro-2-oxoindoline-l-carboxylate: Di-tert-butyl dicarbonate (4.63 g, 21.2 mmol) and sodium hydrogen carbonate (10.7 g, 127 mmol) were added to a stirred solution of 5-nitroindoIin-2-one (3.0 g, 14.2 mmol) in THF (150 mL) and the mixture was heated to 60C. After 3h, the reaction mixture was cooled, filtered and the filtrate was concentrated under reduced pressure. The obtained crude was purified by chromatography by using silica gel using a mixture of 10% ethyl acetate/hexane as an eluent to get the desired compound as a white solid as (2.3 g, 51%). 1H-NMR (300 MHz, DMSO-i/6): delta 8.3 (d, 1H), 8.2 (s, 1H), 7.9 (d, 2H), 3.8 (s, 2H), 1.5 (s, 9H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ORION CORPORATION; UJJINAMATADA, Ravi Kotrabasaiah; HOSAHALLI, Subramanya; SAMAJDAR, Susanta; ABBINENI, Chandrasekhar; WO2015/92118; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 19727-83-4, name is 6-Nitroindoline, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 19727-83-4, name: 6-Nitroindoline

Step A: 6-Nitroindoline (3.0 g, 18.3 mmol) was dissolved in THF (45 mL) and Et3N (3.4 mL, 24.4 mmol) at O0C. Acetyl chloride (1.5 mL, 21 mmol) was added drop wise. The mixture was stirred at room temperature for 30 minutes. The mixture was partitioned between EtOAc and aqueous HCl. The organic layer was dried and concentrated to yield l-acetyl-6-nitroindoline (3.8 g, 100%) as a yellow solid.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; PTC THERAPEUTICS, INC.; HWANG, Peter Seongwoo; TAKASUGI, James; REN, Hongyu; WILDE, Richard Gerald; TURPOFF, Anthony; AREFOLOV, Alexander; KARP, Gary Mitchell; CHEN, Guangming; CAMPBELL, Jeffrey Allen; WO2006/19831; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 20870-79-5,Some common heterocyclic compound, 20870-79-5, name is 5-Nitroindolin-2-one, molecular formula is C8H6N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Trifluoroacetic acid (0.75 mL, 0.009 mol) was added to a cooled (0 C) solution (4.5 mL CH2Cl2) of3-amino-2,2?-bipyridine (0.513 g, 0.003 mol), followed by isoamyl nitrite (0.61 mL, 0.004 mol). After 1 h,the diazonium salt of 3-amino-2,2?-bipyridine was precipitated out by cooling the reaction mixtureto -78 C, followed by the addition of diethyl ether (30 mL). The precipitate was filtered. A sample(2 mmol; 0.27 g) of indol-2-one was dissolved in dilute potassium hydroxide solution (15 mL) andcooled in a saltice bath and then cold diazonium solution was added to this cooled solution portionwise by stirring. The solution was further stirred at 0-5 C for 1 h. The pH of the reaction mixturewas maintained at 4-6 by the addition of solid sodium acetate in portions. The mixture was stirredfor 24 h at room temperature. The resulting solid was filtered, washed with cold water, and air-dried.Crystallization from ethanol gave yellow crystalline.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Nitroindolin-2-one, its application will become more common.

Reference:
Article; ?andrik, Robert; Tisovsky, Pavol; Csicsai, Klaudia; Donovalova, Jana; Gaplovsky, Martin; Sokolik, Robert; Filo, Juraj; Gaplovsky, Anton; Molecules; vol. 24; 14; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 39755-95-8, The chemical industry reduces the impact on the environment during synthesis 39755-95-8, name is 5-Methoxyisatin, I believe this compound will play a more active role in future production and life.

The mixture was poured into 500 g of ice and extracted 3 times with ethyl acetate. The combined extracts were dried over anhydrous sodium sulfate and concentrated to give 5.1 g (65% yield) of 5-methoxyisatin as a dark red solid. 5-Methoxyisatin (5.0 g) and 30 mL of hydrazine hydrate were heated to reflux for 15 minutes. The reaction mixture was cooled to room temperature and 50 mL of water was added. The mixture was extracted 3 times with 25 mL of ethyl acetate each time, the organic layers combined, dried over anhydrous sodium sulfate and concentrated to give a yellow solid. The solid was stirred in ethyl acetate and 1.1 g of insoluble material was removed by vacuum filtration and saved. This material proved to be 2-hydrazinocarbonylmethyl-4-anisidine. The filtrate was concentrated and chromatographed on silica gel eluding with ethyl acetate:hexane (1:1) to give 0.7 g of 5-methoxy-2-oxindole as a yellow solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methoxyisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Sugen, Inc.; US6114371; (2000); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 32692-19-6,Some common heterocyclic compound, 32692-19-6, name is 5-Nitroindoline, molecular formula is C8H8N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of silver sulfate (100 g, 0. 32 mol) and iodine (82 g, 0.32 mol) IN NN-DIMETHYLFORMAMIDE (700 mL) and ethanol (1400 mL) was treated with 5-nitro-2, 3-DIHYDRO-1H-INDOLE I (48 G, 0. 29 mol). The resulting mixture was stirred at 25C for 1.5 h, filtered and the filter pad washed with ethyl acetate. The filtrate was concentrated in vacuo to a volume of approximately 500 mL. This solution was treated with a L. oN aqueous sodium thiosulfate solution (100 mL) and a saturated aqueous sodium chloride solution (400 mL). The resulting precipitate was collected by filtration, washed with water and petroleum ether, and dried in vacuo to afford 7-IODO-5-NITRO-2, 3-DIHYDRO-1H-INDOLE II (83.9 G, 98. 9%) as a white solid: 1H NMR (DMSO-D6, 300 MHz) 8 8. 18 (d, J = 2. 20 Hz, 1H), 7. 80 (d, J = 1. 46 Hz, 1H), 7. 03 (broad s, 1H), 3.65 (t, J = 8. 97 Hz, 2H), 3. 17 (t, J = 8. 60 Hz, 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Nitroindoline, its application will become more common.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; WO2004/101568; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 6872-06-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6872-06-6, name is 2-Methylindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A 25 mL oven-dried Schlenk tube was sequentially added N-methylaniline 1 or aniline 4 (0.2 mmol), Ethyl Bromodifluoroacetate 2a (81.2 mg, 0.4 mmol), DMF (1ml) and H2O (1 mL) was added under air. The reaction mixture was stirred for 6 h at 110. The solution was then diluted with ethyl acetate (20 mL), washed with brine (10 mL), extracted with ethyl acetate (3*5 mL), dried over anhydrous Na2SO4, filtered and evaporated under vacuum. The crude reaction mixture was purified by column chromatography (silica gel, ethyl acetate/petroleum ether) yielded the desired product 3 or 5.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Methylindoline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Xu, Zhuo-Wei; Xu, Wen-Yi; Pei, Xiao-Jun; Tang, Fei; Feng, Yi-Si; Tetrahedron Letters; vol. 60; 18; (2019); p. 1254 – 1258;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 19155-24-9, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 19155-24-9 name is 3,3-Dimethylindolin-2-one, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

a 5-Chloroacetyl-3,3-dimethyl-2H-indol-2-one 10.8 g (66.4 mmoles) 3,3-dimethyl-3H-indol-2-one are slowly added (in 1 h) to a suspension of 26 7 g (200 mmoles) aluminium chloride and 15 g, that is 10.58 ml (133 mmoles) chloroacetyl chloride in 60 ml dichloromethane, then the mixture is heated under reflux for 1 h 30 min. The brown suspension obtained is slowly poured into 500 ml ice-water, the mixture is stirred for 30 min and then filtered and the solid is washed with a little ether and dried. 16.3 g of crystals are obtained, which are used as such in the following step.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,3-Dimethylindolin-2-one, and friends who are interested can also refer to it.

Reference:
Patent; Synthelabo; US5034401; (1991); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem