Author: Jessica.F

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2307-00-8, name is 5-Amino-2-methylisoindoline-1,3-dione, A new synthetic method of this compound is introduced below., Computed Properties of C9H8N2O2

4-(3-Chloro-2-hydroxypropylamino)-N-methylphthalimide Twenty-five grams (g) (0.142 mole) 4-amino-N-methylphthalimide [Flitsch, Chem. Ber. 94:2494(1961)] and 20.7 g (0.21 mole) 1-chloro-2,3-epoxypropane were added to 150 ml 2,2,2-trifluoroethanol and the reaction mixture was heated to reflux with stirring for 48 hours. Seventy to eighty ml of 2,2,2-trifluoroethanol was removed by distillation and a heavy yellow precipitate formed when the remaining solution cooled to room temperature. This precipitate was triturated with ethyl acetate, collected by filtration and dried to give 29.5 g (77% yield) of the desired phthalimide intermediate m.p. 136-138.5 C. Analysis: Calculated for C12 H13 ClN2 O3: C, 53.64; H, 4.88; N, 10.45. Found: C, 53.87; H, 4.85; N, 10.81.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Miles Laboratories, Inc.; US4261893; (1981); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

317-20-4, name is 7-Fluoroisatin, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Application In Synthesis of 7-Fluoroisatin

This compound was prepared following the procedure of Johnson, B. L.; Rodgers, J. D. Syn. Comm. 2005, 35, 2681-2684. A suspension of 5.28 g 7-fluoroisatin in 30 mL of water was added 1.30 g NaOH, in 10 mL water with stirring. The resulting dark red solution was stirred until all of the solids dissolved and was then cooled in an ice water bath. The solution was then slowly added a cooled (ice bath) solution of 2.21 g NaNO2 in 10 mL water. These combined solutions were then added slowly to cooled (ice bath) to solution of aqueous sulfuric acid (3.4 mL H2SO4 in 60 mL water). Ice was added to maintain a temperature of approximately 0 C. After stirring for approximately 10 minutes, this dark red diazonium solution was added slowly to a chilled (0 C., ice bath) solution of 18 g SnCl22H2O in 30 mL concentrated HCl. Ice was again added to maintain a temperature of approximately 0 C. After stirring for approximately 1 hour, the reaction was filtered and the resulting residue was dissolved in 1 N NaOH (60 mL), washed with ether (2×50 mL). The resulting yellow-brown solution was cooled in an ice bath and acidified to a pH3 (litmus paper) with concentrated HCl, which resulted in the formation of a dark yellow precipitate. The precipitate was collected by filtration, washed with water, and dried over night in an oven to give 3.69 g (47%) of 7-fluoro-1H-indazole-3-carboxylic acid as an orange solid. 1H NMR (400 MHz, DMSO-d6) delta 14.35 (br s, 1H), 13.22 (br s, 1H), 7.89-7.87 (m, 1H), 7.26-7.21 (m, 2H). MS (ESI) m/z 181 (M+H)+.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Pfizer Inc.; US2011/28447; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 61-70-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 61-70-1 name is 1-Methylindolin-2-one, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

N-methyloxindole (0.5 g, 3.4 mmol) in acetonitrile(5 mL) was stirred at 0C, and then NBS (0.62 g) in 10 mL acetonitrile was added dropwise. The mixture was stirred at that temperature for 1h and then stirred for 2h at ambienttemperature. Then the solution was evaporated and the solid was dissolved in CHCl3,washed twice with water. After CHCl3 was evaporated, the brown solid was recrystallizedwith hexane. 5-bromo-N-methyloxindole (0.44 g) was prepared in 58% yield.1H-NMR (300MHz, CDCl3) delta(ppm) : 7.42-7.39 (d, 1H), 7.26 (s, 1H), 6.71-6.68 (d,1H), 3.52-3.20 (s, 2H), 3.19 (s, 3H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Methylindolin-2-one, and friends who are interested can also refer to it.

Reference:
Article; Kang, Hyeonmi; Lee, Hayoon; Shin, Hwangyu; Kang, Seokwoo; Kim, Beomjin; Park, Jongwook; Molecular Crystals and Liquid Crystals; vol. 618; 1; (2015); p. 47 – 54;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 6341-92-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 6341-92-0 as follows.

Is added to the reactor 153.8 mg (0.85 mmol) 6 – chloro – isatin and 102.1 mg (1.02 mmol) 2, 4 – pentanedionato, add 50 ml toluene and 5 ml DMF as the reaction solvent, adding 13.6 mg KMnO4, 7.5 Mg MnO2And 20 mg of strongly acidic ion resin D001 as catalyst, electric jacket is heated to 115 C, magnetic stirring reflux reaction for 9 hours. Thin-layer chromatographic trace to after the reaction is complete, evaporating the solvent under reduced pressure, the filter cake is toluene washing, drying to obtain the target compound 127.2 mg, total yield 56.9%.

According to the analysis of related databases, 6341-92-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Shaanxi University of Science and Technology; Liang Chengyuan; Tian Danni; Jia Minyi; Wang Xuechuan; Dong Hao; Wang Qiang; (12 pag.)CN108558895; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 6872-06-6, name is 2-Methylindoline, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6872-06-6, Recommanded Product: 2-Methylindoline

General procedure: The mixture of xylene (1.0 mL), substrate (0.3 mmol), and rGO (100 w%) was stirred at 100 C for 12 h under O2 atmosphere. After the reaction, the mixture was diluted with AcOEt and water. The organic phase was concentrated under reduced pressure, and purified by column chromatography with silica gel.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Methylindoline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Morimoto, Naoki; Takeuchi, Yasuo; Nishina, Yuta; Chemistry Letters; vol. 45; 1; (2016); p. 21 – 23;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 611-09-6, These common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Weigh5-nitroindole-dione 5.00g (26.02mmol) into a 250mL round bottom flask was added150mL of cyclohexane under stirring conditions, neopentyl glycol was slowlyadded 2.98g (28.63mmol), of methylbenzenesulfonate 0.896g (5.20mmol), thenheated at reflux at 100 6h.Starting material disappeared on TLC, cooled to room temperature, suctionfiltered, washed with a saturated aqueous sodium hydrogen carbonate builders,and dried under vacuum oven to give 5-nitro-3,3-shrink glutaraldehyde newindolinone 6.63g, yield 91.6%.

Statistics shows that 5-Nitroindoline-2,3-dione is playing an increasingly important role. we look forward to future research findings about 611-09-6.

Reference:
Patent; Tianjin University of Science&Technology; Yu, peng; Liu, fengxi; sun, HUA; Teng, yuou; Guo, qiannan; Han, kailin; Li, Huan Huan; Yang, yao; song, BINBIN; (19 pag.)CN103554008; (2016); B;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1127-59-9, name is 7-Methylindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., name: 7-Methylindoline-2,3-dione

General procedure: Mg(ClO4)2 (10 mol %) was added to a mixture of isatin (2 mmol), malononitrile or ethyl cyanoacetate (2mmol), and dimedone (2 mmol) in aqueous ethanol solution(50%, v/v, 5 mL), and the resulting mixture was stirred at 50C for 30-60 min. Upon completion of the reaction (TLC),the mixture was allowed to cool to room temperature. The resulting solid was filtered and washed successively with water (2 × 30 mL) and cold aqueous ethanol (2 × 1 mL) to afford pure product 4.

According to the analysis of related databases, 1127-59-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Wu, Chunlei; Shen, Runpu; Chen, Jianhui; Hu, Chunqi; Bulletin of the Korean Chemical Society; vol. 34; 8; (2013); p. 2431 – 2435;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 13861-75-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 13861-75-1, name is Spiro[cyclopropane-1,3′-indolin]-2′-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 1,2-dihydro-3-spiro-1′-cyclopropyl-1H-indole-2-one (2.5 g crude) in THF (50 mL) was added LiAlH4 (2 g, 52 mmol) portionwise. After heating the mixture to reflux, it was poured into crushed ice, basified with aqueous ammonia to pH 8 and extracted with EtOAc. The combined organic layers were washed with brine, dried over Na2SO4 and concentrated to give the crude 1,2-dihydro-3-spiro-1′-cyclopropyl-1H-indole as a yellow solid (about 2 g), which was used directly in the next step.

The synthetic route of Spiro[cyclopropane-1,3′-indolin]-2′-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Vertex Pharmaceuticals Incorporated; Van Goor, Fredrick F.; Burton, William Lawrence; US2015/231142; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 611-09-6,Some common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, molecular formula is C8H4N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: First, 0.01g of the CoFe2O4(at)SiO2(at)SO3H was dispersed for 30min and after that an amount of 1mmol from isatin, malononitrile and dimedone with ethanol/water (ratio 1:1) were mixed, and the final mixture was placed in 80C at the reflux condition. After completing the reaction by passing a certain time, the con -taining solution was separated by centrifuging and the crude product extracted and washed with ethyl acetate, and then Na 2 SO 4 was added to dehydrating the product. After that, the solvent was removed by using a rotary evaporator and finally the product recrystallized in hot ethanol to gain the pure product. Moreo -ver, the catalyst was washed and applied for several times to examine reusability. Structural assignments of the products are based on their 1 HNMR, 13 CNMR and IR spectra.

The synthetic route of 611-09-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zamani-Ranjbar-Garmroodi, Bardia; Nasseri, Mohammad A.; Allahresani, Ali; Hemmat, Kaveh; Research on Chemical Intermediates; vol. 45; 11; (2019); p. 5665 – 5680;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 2058-72-2,Some common heterocyclic compound, 2058-72-2, name is 5-Bromo-1-methylindoline-2,3-dione, molecular formula is C9H6BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of isatin derivatives 3 (1 mmol), proline 4 (1 mmol, 0.115 g) and chiral cinamoyl oxazolidinone 1 (1 mmol, 0.293 g) was dissolved in EtOH (80%) (5 mL) and stirred at room temperature for about 5 h. After completion of the reaction (TLC), the solvent was evaporated under reduced pressure, the products (5a-i) were obtained in quantitative yields; and for future purification they were washed with cold EtOH.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromo-1-methylindoline-2,3-dione, its application will become more common.

Reference:
Article; Taghizadeh, Mohammad Javad; Arvinnezhad, Hamid; Samadi, Saadi; Jadidi, Khosrow; Javidan, Abdollah; Notash, Behrouz; Tetrahedron Letters; vol. 53; 38; (2012); p. 5148 – 5150;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem