Category: indolines-derivatives

Related Products of 7699-18-5, The prevalence of solvent effects in heterogeneous catalysis has motivated developing quantitative kinetic, spectroscopic, and theoretical assessments of solvent structures and their interactions with reaction intermediates and transition states.

PREPARATION A N-methyl-5-methoxyoxindole 5-methoxy oxindole (450 mg, 2.76 mmol) and potassium carbonate (585 mg, 4.23 mmol) were combined in 45 ml of acetone under an inert atmosphere. To this white, heterogenous mixture was added 0.33 ml of methyl iodide (5.30 mmol) via syringe. The reaction mixture was stirred at room temperature for 10 hours and then at 75 C. for 3 hours. Additional potassium carbonate and methyl iodide were added (290 mg and 0.11 ml, respectively), and the reaction mixture was stirred at 75 C. for 6 more hours. The reaction mixture was then poured into 300 ml of saturated brine solution and extracted with 3*200 ml ether. The combined organic layers were dried over MgSO4, filtered, and stripped to a yellow oil. This was purified via flash chromatography (3:1 ethyl ether/hexane) to provide the title compound (307 mg, 63% yield) as white crystals: m.p. 93-94 C. M/z calculated for C10 H11 NO2: 177.0790, Found: 177.08066.

In the meantime we’ve collected together some recent articles in this area about 7699-18-5 to whet your appetite. Happy reading!

Reference:
Patent; Pfizer Inc.; US5502072; (1996); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 261732-38-1, name is tert-Butyl 5-bromoindoline-1-carboxylate, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of tert-Butyl 5-bromoindoline-1-carboxylate

A solution of 5-bromo-2,3-dihydro-indole-1-carboxylic acid tert-butyl ester (4. 0 g, 13.5 mmol), tributylamine and bis-triphenylphosphinopalladium(II) chloride (0.65 g, 0.926 mmol) in methanol was sealed in a Parr pressure apparatus and pressurized with 600 psi of carbon monoxide. The solution was heated at 100 C for one week. The vessel was cooled to room temperature and the gas vented. The solution was filtered, and the solvent was evaporated in vacuo. The residue was purified by flash chromatography, on silica gel eluted with 10-40% ethyl acetate in hexane to give the product mixed with tributylamine, 2.5 g (67%). The product was used without further purification in the subsequent step.

Interested yet? This just the tip of the iceberg, You can reading other blog about 261732-38-1.

Reference:
Patent; JANSSEN PHARMACEUTICA N.V.; WO2004/69792; (2004); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 20780-77-2 as follows. Application of 20780-77-2

c. 7-Iodo-2H-3,1-benzoxazine-2,4(1H)-dione To a stirred warm (80 C.) solution of 6-iodo-1H-indole-2,3dione (3.0 g, 11 mM) in acetic acid (10 mL) and acetic anhydride (10 mL) was added in small portions chromium trioxide (1.83 g, 18.3 mM) while maintaining the temperature of the reaction mixture at 80-90 C. The reaction mixture was then heated at 80 C. for 10 min, cooled and poured into water. The resulting mixture was filtered and the collected solids dried to provide the title compound as a yellow solid (2.6 g, 81.8%); MS(CI): 290 (M+H).

You can get involved in discussing the latest developments in this exciting area about 6-Iodoindoline-2,3-dione.

Reference:
Patent; Imperial Chemical Industries, PLC; US5599814; (1997); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In chemical reaction engineering, simulations are useful for investigating and optimizing a particular reaction process or system., Quality Control of 3-Nitrophthalimide

To a solution of potassium hydroxide (16.1 g, 286 mmol) in water (500 mL), was added 3-nitrophthalimide (25.0 g, 130 mmol) in portion at 0 C. The suspension was stirred at 0 C for 3 hrs, and then heated to 30 C for 3 hrs. To the solution, was added HC1 (100 mL, 6N). The resulting suspension was cooled to 0 C for 1 hr. The suspension was filtered and washed with cold water (2 x 10 mL) to give 3- nitro-phthalamic acid as a white solid (24.6 g, 90% yield): ?H NMR (DMSO-d6) 5 7.69 (brs, 1H, NHJ]), 7.74 (t, J= 8 Hz, 1H, Ar), 7.92 (dd, J= 1, 8 Hz, 1H, Ar), 8.13 (dd, J= 1, 8Hz, 1H, Ar), 8.15 (brs, 1H, NHJ]), 13.59 (s, 1H, 01]); ?3C NIVIR (DMSO-d6) 5125.33, 129.15, 130.25, 132.54, 136.72, 147.03, 165.90, 167.31.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 603-62-3.

Reference:
Patent; CELGENE CORPORATION; HUANG, Lianfeng; ZOU, Daozhong; (177 pag.)WO2018/165142; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 56341-37-8, name is 6-Chlorooxindole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 6-Chlorooxindole

General procedure: To the mixture of optionally substituted 6-chlorooxindole (5.0 mmol) and 3-chloro-2-fluorobenzaldehyde (2.4 g, 15 mmol) (Oakwood) in methanol (50 mL) was addedpiperidine (Aldrich) (1.7 g, 20 mmol) dropwise. The mixture was then heated at 50 Cfor 3 h. After cooled to 4 C, the mixture was filtered and resulting precipitate wascollected, washed with cold methanol, dried to give the desired product.(E)-6-chloro-3-(3-chloro-2-fluoro-benzylidene)-1,3-dihydro-indol-2-one 13.1 (R3a = H,R3b = H, R3c = H): a yellow solid (Yield, 84%); 1H NMR (300 MHz, DMSO-d6) 10.88 (br.s., 1H), 7.73 (q, J = 7.41 Hz, 2H), 7.56 (s, 1H), 7.34 – 7.43 (m, 1H), 7.17 (d, J = 8.10 Hz,1H), 6.87 – 6.97 (m, 2H) ppm.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 56341-37-8 is helpful to your research.

Reference:
Article; Zhang, Zhuming; Ding, Qingjie; Liu, Jin-Jun; Zhang, Jing; Jiang, Nan; Chu, Xin-Jie; Bartkovitz, David; Luk, Kin-Chun; Janson, Cheryl; Tovar, Christian; Filipovic, Zoran M.; Higgins, Brian; Glenn, Kelli; Packman, Kathryn; Vassilev, Lyubomir T.; Graves, Bradford; Bioorganic and Medicinal Chemistry; vol. 22; 15; (2014); p. 4001 – 4009;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 317-20-4 as follows. Recommanded Product: 317-20-4

To a stirred solution of 7-fluoroindoline-2,3-dione (500 mg, 3.03 mmol) in DMF (5 mL) were successively added K2C03 (502 mg, 3.63 mmol) and methyl iodide (0.199 mL, 3.18 mmol). The resulting mixture was stirred at RT for 1 hr. The mixture was quenched with water, diluted with EtOAc and saturated aqueous NaHC03 solution and both phases were separated. The aqueous layer was extracted with EtOAc. The combined organic layers were washed with brine, dried over anhydrous MgS04, filtered and concentrated under reduced pressure to afford the title product (497 mg, 2.219 mmol, 73.3% yield) as yellow solid. Rt = 0.69 min (UPLC-MS); ESI-MS = 179.9 [M+1]+ (UPLC-MS).

As always, wish you can browse a selection of our May HOT articles below about 7-Fluoroisatin.

Reference:
Patent; NOVARTIS AG; ARISTA, Luca; CHAMOIN, Sylvie; D’ALESSANDRO, Pier Luca; LINDVALL, Mika; LIZOS, Dimitrios; STIEFL, Nikolaus Johannes; TEIXEIRA-FOUCHARD, Sylvie; ULLRICH, Thomas; WEILER, Sven; (151 pag.)WO2019/102256; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 446292-07-5, name is (R)-2-(2-Hydroxy-3-((4-(3-oxomorpholino)phenyl)amino)propyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., Recommanded Product: 446292-07-5

142.5 g (0.360 mol) of 2-((2R)-2-hydroxy-3-{[4-(3-oxo-4-morpholinyl)phenyl]amino} propyl)-1 H-isoindole-1 , 3(2H)-dione (I), 175.32 g (1 .082 mol) of N,N- carbonyldiimidazole and 1425 mL of tetrahydrofuran were charged in a 3L flask and the reaction mass was heated to reflux for 4 hours. Then, the reaction mass was cooled down to 0 C for 1 hour and the resulting solid was filtered off and dried under vacuum at 70 C.Yield: 137.8 g. Molar yield: 90.73%. HPLC purity: 99.74%. M.P.: 223 C. S.O.R.: [a ]D25 = -75.26 (c = 1 ,DMSO)

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 446292-07-5.

Reference:
Patent; LABORATORIOS LESVI, S. L.; VISHNU NEWADKAR, Ravindranath; CHANGDEO GAIKWAD, Avinash; MADHUKAR HARAD, Ajay; DALMASES BARJOAN, Pere; WO2013/53739; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Chemistry graduates have much scope to use their knowledge in a range of research sectors, including roles within chemical engineering, chemical and related industries, healthcare and more. , 1074-82-4

50 mL of DMF, 0.025 mol of the potassium salt of phthalimide, 0.10 mol of 1,4-dibromobutane and 0.5 g of TBAB, reaction at 70 C. for 2.0 h; cooling to room temperature, pouring into ice water, extraction with ethyl acetate, After washing with water, drying and desolvation, the mixture was allowed to stand overnight to precipitate 5.82 g of N-(4-bromobutyl)phthalimide as a white solid, mp 78-81C, yield 82.5%.

Interested yet? This just the tip of the iceberg, You can reading other blog about 1074-82-4.

Reference:
Patent; Hunan University; Hu Aixi; Yang Zihui; Li Jingwen; (9 pag.)CN107540647; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Recommanded Product: 1029691-06-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1029691-06-2 as follows.

Mix (+/-)-2-(3-oxo-cyclopentyl)-isoindole-1,3-dione (12.7 g, 55.3 mmol) and 4-cyanophenylhydrazine-HCl (8.53 g, 50.3 mmol) in HOAc (200 mL) and 4N HCl dioxane (50 mL). Using mechanical stirring, heat the reaction to 90 C. for 18 h, then add additional 4N HCl dioxane (20 mL). Heat the reaction to 100 C. for 18 h. Dilute the reaction mixture with water (600 mL) and collect a black solid by vacuum filtration. Sonicate the solid with MeOH (200 mL), then collect and dry in a vacuum oven to give 10.94 g (66%) of a gray-brown solid. MS (m/z): 328 (M+1), 326 (M-1).

Keep reading other articles of 2-(3-Oxocyclopentyl)isoindoline-1,3-dione! Don’t worry, you don’t need a PhD in chemistry to understand the explanations! I believe this compound will play a more active role in future production and life.

Reference:
Patent; Gavardinas, Konstantinos; Green, Jonathan Edward; Jadhav, Prabhakar Kondaji; Matthews, Donald Paul; US2010/69404; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 7147-90-2,When developing chemical systems it’s of course important to gain a deep understanding of the chemical reaction process.

To a solution of 5-chloro-isoindole-l,3-dione (3.63 g, 20 mmol) in DCM (150 mL) was added benzylmagnesium chloride (2 M in THF, 30 mL) dropwise at 0 C. After the addition, the reaction mixture was allowed to stir at 0 C for 3 hours before it was quenched with satd. aq. NH4C1 solution. After extraction with DCM, the organic layer was washed with brine, dried over anhy. Na2S04, filtered and concentrated in vacuo to give a crude product containing a mixture of two regio isomers (5.47 g, 100%). MS: 274.1 (M+H+).

The chemical industry reduces the impact on the environment during synthesis 5-Chloroisoindoline-1,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; AEBI, Johannes; AMREIN, Kurt; CHEN, Wenming; HORNSPERGER, Benoit; KUHN, Bernd; LIU, Yongfu; MAERKI, Hans P.; MAYWEG, Alexander V.; MOHR, Peter; TAN, Xuefei; WANG, Zhanguo; ZHOU, Mingwei; WO2013/79452; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem