Category: indolines-derivatives

Electric Literature of 71294-03-6,When developing chemical systems it’s of course important to gain a deep understanding of the chemical reaction process.

7-Fluoro-1,3-dihydro-indol-2-one (7.3 g, 48 mmol) and lithium chloride (6.67 g, 158 mmol) was dissolved in THF (200 mL). The solution was then cooled to -78 C. and n-butyllithium (2.5 M, 40 mL, 100 mmol) was added slowly over a 15 minute period. After 20 minutes at -78 C., methyl iodide (6 mL, 96 mmol) was added and the mixture allowed to warm to room temperature. After 24 hours, the mixture was poured into water and extracted with ethyl acetate, dried (MgSO4), and concentrated in vacuo. Flash chromatography (SiO2, Hexane/ethylacetate 9/1 then 8/2) gave 7-fluoro-3,3-dimethyl-1,3-dihydro-2H-indol-2-one (4.1 g, 48%)

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 7-Fluoroindolin-2-one, and friends who are interested can also refer to it.

Reference:
Patent; Wyeth; US2006/9509; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 2058-72-2, Researchers are common within chemical engineering and are often tasked with creating and developing new chemical techniques, frequently combining other advanced and emerging scientific areas.

General procedure: To a stirred mixture of 1-benzyl-1H-indole-2,3-dione (1a, 0.25 g,1.05 mmol), CuI (0.01 g, 0.05 mmol, 0.05 equiv), and phenylacetylene (2a, 0.11 g, 1.11 mmol, 1.05 equiv) in anhyd toluene (2 mL), DBU (0.032 g, 0.21 mmol, 0.2 equiv) was added at 25 C under a N2 atmosphere. Stirring was continued at this temperature until the starting material was completely consumed (TLC monitoring). After completion, the mixture was quenched with sat. aq NH4Cl (2mL) and extracted with EtOAc (2 × 5 mL). The combined organic layers were dried (anhyd Na2SO4) and evaporated under reduced pressure to dryness. The crude product thus obtained was purified by column chromatography (activated silica gel, 60-120 mesh, hexane-EtOAc) to afford pure 3aa as a white solid; yield: 0.35 g (97%); mp 177-179 C.

You can also check out more blogs about 2058-72-2.

Reference:
Article; Chouhan, Mangilal; Senwar, Kishna Ram; Kumar, Kapil; Sharma, Ratnesh; Nair, Vipin A.; Synthesis; vol. 46; 2; (2014); p. 195 – 202;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6341-92-0, name is 6-Chloroisatin, A new synthetic method of this compound is introduced below., category: indolines-derivatives

D. 6-Chloro-2-oxindole Reaction of 36.2 g of 6-chloroisatin with hydrazine hydrate followed by sodium ethoxide in ethanol, substantially according to C above, afforded 14.2 g of 6-chloro-2-oxindole, mp 196-198 C.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 6341-92-0.

Reference:
Patent; Pfizer Inc.; US4721712; (1988); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Formula: C9H6BrNO2, Chemical engineers ensure the efficiency and safety of chemical processes, adapt the chemical make-up of products to meet environmental or economic needs, and apply new technologies to improve existing processes.

Example 14: 6-((R)-5-{2-[((R5)-8-methoxy-l,2-dihydro-3-oxa-5,9-diaza- cyclopenta[fl]naphthalen-l-ylmethyl)-amino]-ethyl}-2-oxo-oxazolidin-3-yl)- 4H-benzo [ 1 ,4] thiazin-3-one:; 14.L rac-3-( 1 ,3-dioxo- 1 ,3-dihydro-isoindol-2-yl)-2-(3-fluoro-6-methoxy- [ 1 ,5] naphthyridin-4-yl)-propionic acid ethyl ester:; A solution of (3-fluoro-6-methoxy-[l,5]naphthyridin-4-yl)-acetic acid ethyl ester (6.78 g; prepared in analogy to the corresponding methyl ester described in WO 2007/122258) in TEtaF (30 niL) was added dropwise at -78C to a solution of LiEtaMDS (31 mL; IM in TEtaF) diluted in TEtaF (2O mL). After stirring for I h at -78C a solution of Lambda/-(bromomethyl)phthalimide (7.40 g) in TEtaF (30 mL) was added dropwise and the mixture was stirred for an additional 1 h at -78C and then overnight at rt. The yellow solution was quenched with N HCl (280 mL) and extracted with DCM. The combined org. layers were washed with H2O, dried over MgSO4, concentrated and purified by CC (Hept/EA 1 : 1), affording a light yellow foam (5.49 g; 51% yield). MS (ESI, m/z): 424.2 [M+H+].

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 5332-26-3 is helpful to your research.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; HUBSCHWERLEN, Christian; RUEEDI, Georg; SURIVET, Jean-Philippe; ZUMBRUNN ACKLIN, Cornelia; WO2010/15985; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 868066-91-5, The chemical industry reduces the impact on the environment during synthesis 868066-91-5, name is 5-Bromo-2-methylisoindolin-1-one, I believe this compound will play a more active role in future production and life.

[00532] Intermediate Sic: 2-methyl-5-(4,4,5,5-tetramethyl-1 ,3,2-dioxaborolan-2-yI)isoindolin-1-one[00533] A round bottomed flask containing bis(pinacolato)diboron (354mg, 1 .3gmmol) and KOAc (326mg, 3.32mmol) in 1 ,4-dioxane (6.5mL) was evacuated/backfilled with nitrogen. Pd(dppt)C12.CH2CI2 (54mg, 0.O7mmol) was added and the flask was evacuated/backfilled with nitrogen again. The reaction mixture was then stirred and heated at 85 C overnight. After this timethe mixture was cooled to room temperature, filtered through a plug of celite and the solid was washed with EtOAc. The filtrate was concentrated and the residue purified by column chromatography using an eluent of 0-100% EtOAc in heptane to give 2-methyl-5-(4,4,5,5- tetramethyl-1,3,2-dioxaborolan-2-yl)isoindolin-1-one (324mg,1.lgmmol, 89% yield) as a brown solid.1H NMR (CDCI3, 400MHz) O/ppm: 7.92 (1H, dd, J= 7.6Hz, 0.4Hz), 7.90-7.89 (1H, m), 7.85 (1H, dd, J 7.6Hz, 0.4Hz), 4.39 (2H, 5), 3.23 (3H, 5), 1.38 (12H, 5).MS Method 3: RT: 3.61 mi m/z 274.1 [M+H]

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 868066-91-5.

Reference:
Patent; REDX PHARMA PLC; ARMER, Richard; BELFIELD, Andrew; BINGHAM, Matilda; JOHNSON, Alice; MARGATHE, Jean-Francois; AVERY, Craig; HUGHES, Shaun; MORRISON, Angus; (278 pag.)WO2016/51193; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 17702-83-9, Having gained chemical understanding at molecular level, chemistry graduates may choose to apply this knowledge in almost unlimited ways, as it can be used to analyze all matter and therefore our entire environment.

General procedure: 0.91 g (3.6 mmol) N-(2 -bromoethyl) phthalimide was dissolved 20 mL DMF, added 0.53 g (3 mmol)1-benzylpiperazine, 0.62 g (4.5 mmol) K2CO3, heated to 60-70 °C reacted for 4 h, TLC detection, until the benzylpiperazinewas complete reaction. 30 mL of water was added, extracted three times withethyl acetate (20 mL× 3), the organic layer was extracted four times (30mL × 4)with saturated brine, dried with anhydrous magnesium sulfate, and the solventwas distilled off under reduced pressure, cooled to room temperature, silicagel column chromatography (100-200 mesh silica gel, eluent petroleum ether:ethyl acetate = 1:1 – 1: 4) to give 0.7 g (67percent yield) as a white solid. #10;

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 17702-83-9.

Reference:
Article; Si, Weijie; Zhang, Tao; Zhang, Lanxiang; Mei, Xiangdong; Dong, Mengya; Zhang, Kaixin; Ning, Jun; Bioorganic and Medicinal Chemistry Letters; vol. 26; 9; (2016); p. 2380 – 2382;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., Synthetic Route of 675109-26-9

6-Bromoisoindolin-1-one (636 mg, 3.10 mmol), 4,4,4′,4′,5,5,5′,5′-octamethyl-2,2′-bi(1,3,2-dioxaborolane) (930 mg, 3.70 mmol), and Pd(dppf)Cl2 (125 mg, 0.150 mmol) were added to a dry flask and placed under N2. Potassium acetate (900 mg, 9.20 mmol) was weighed directly into the flask. The flask was then evacuated and back filled with N2. Anhydrous N,N-dimethylformamide (DMF) (18 mL) was added and the reaction was heated at 80 C. overnight. The reaction mixture was evaporated to dryness and the resulting material was purified by silica gel chromatography eluting with 0-100% ethyl acetate in hexane to yield 6-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)isoindolin-1-one (493 mg, 62%). ESI-MS m/z calc. 259.1, found 260.1 (M+1)+. Retention time 1.24 minutes.

Interested yet? This just the tip of the iceberg, You can reading other blog about 675109-26-9.

Reference:
Patent; HADIDA RUAH, SARA S.; Miller, Mark; Zhou, Jinglan; Bear, Brian; Grootenhuis, Peter; US2009/143381; (2009); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 13220-46-7, Chemistry built the modern world, from the materials that make up the everyday objects around us, the batteries in our devices and cleaning products that help to maintain sanitation.

4-Methyl-oxindole was condensed with 3-(2-formyl-1,4,5,6,7,8-hexahydro-cyclohepta[b]pyrrol-3-yl)-propionic acid and piperidine in ethanol to give the title compound. MS (m/z) 365 [M+1].

In the meantime we’ve collected together some recent articles in this area about 13220-46-7 to whet your appetite. Happy reading!

Reference:
Patent; SUGEN, Inc.; US2004/186160; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 6872-06-6, Modeling chemical reactions helps engineers virtually understand the chemistry, optimal size and design of the system, and how it interacts with other physics that may come into play.

Under the protection of anhydrous oxygen-free and inert gas, 0.01161 g (1.14×10-5 mol) {L1La[N(SiMe3)2]}2 was added to the reaction flask, and then 148 muL (1.14×10-3 mol) 2- Methyl porphyrin was added to 1.41 mL of tetrahydrofuran and stirred at room temperature for 0.5 hour. Further, 0.34 mL (3.40 x 10-3 mol) of benzaldehyde was added, and after the reaction was stirred for 3 hours, the reaction was completed.Pour the reaction solution into an eggplant-shaped bottle, add a small amount of ethyl acetate to the reaction flask and wash it three times, still pour into the eggplant-shaped bottle.Add appropriate amount of silica gel, spin dry, and then load on the packed column of silica gel.The column was passed through a suitable eluent (ethyl acetate: petroleum ether = 1: 6) to afford product, yield 75%.

Keep up to date with our latest articles, reviews, collections & more by following us. You can also keep informed by signing up to our E-Alerts.

Reference:
Patent; Soochow University (Suzhou); Zhao Bei; Xiao Yang; Lu Chengrong; (18 pag.)CN104817583; (2019); B;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Career opportunities within science and technology are seeing unprecedented growth across the world, and those who study chemistry or another natural science at university now have increasingly better career prospects. Related Products of 239463-85-5

To a slurry of SI-I (769 g, 1.50 mol) as the tartrate salt (e.e. 98.3%) in dichloromethane (2 L) was added dropwise an aqueous solution of sodium hydroxide (5 N, 126 g, 3.15 mol) at 10 C, all in a round bottom flask (5 L). The reaction mixture was stirred until the pH was 11. The organic layer was separated and the aqueous layer was extracted with dichloromethane twice (500 ml 2). The combined organic layer was washed with water to neutrality, dried over sodium sulfate and filtered. The filtrate was concentrated under reduced pressure to give the SI-II (531 g, 97.5%, HPLC 98.2%) as a light yellow oil.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to navigate research efforts intended to implement such knowledge in the development of new catalytic chemistries. Read on for other articles about 239463-85-5.

Reference:
Article; Liu, Hui; Lv, Fei; Liu, Yuan; Organic Preparations and Procedures International; vol. 51; 3; (2019); p. 287 – 293;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem