Category: indolines-derivatives

Safety of 5-Bromo-2-methylisoindolin-1-one, Chemical engineers ensure the efficiency and safety of chemical processes, adapt the chemical make-up of products to meet environmental or economic needs, and apply new technologies to improve existing processes.

Synthesis of 5-bromo-2,3-dimethylisoindolin-1-one (2) To a solution of 5-bromo-2-methylisoindolin-1-one (1, 1 g, 4.42 mmol) in tetrahydrofuran (20 mL) at -78° C., sodium hexamethyldisilazane (4.4 mL, 4.86 mmol 1M solution in tetrahydrofuran) was added and the reaction mixture was allowed to stir at the same temperature for 15 min. Methyl iodide (0.55 mL, 8.85 mmol) was added and the reaction mixture was stirred at -78° C. for 2 h. The reaction mixture was quenched with water and extracted with ethyl acetate. The organic layer was washed with brine, separated, dried over sodium sulphate and concentrated under reduced pressure. The residue was purified by silica gel column chromatography using 30percent ethyl acetate in hexanes as eluent to afford 5-bromo-2,3-dimethylisoindolin-1-one (2). Yield: 0.1 g, 9percent; MS (ESI) m/z 240 [M+1]+.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 868066-91-5.

Reference:
Patent; eFFECTOR Therapeutics, Inc.; Sprengeler, Paul A.; Reich, Siegfried H.; Ernst, Justin T.; Webber, Stephen E.; Shaghafi, Mike; Murphy, Douglas; Tran, Chinh; (131 pag.)US10112955; (2018); B2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Career opportunities within science and technology are seeing unprecedented growth across the world, and those who study chemistry or another natural science at university now have increasingly better career prospects. Recommanded Product: 193354-13-1

5-Methoxycarbonyl-2-oxindole 5-Iodo-2-oxindole (17 g) was refluxed with 2 g of palladium diacetate, 18.2 g of triethylamine, 150 ML of methanol, 15 ML of dimethylsulfoxide and 2.6 g of DPPP in an atmosphere saturated with carbon monoxide.. After 24 hours, the reaction was filtered to remove the catalyst and the filtrate concentrated.. The concentrate was chromatographed on silica gel (30% ethyl acetate in hexane).. The fractions containing product were concentrated and allowed to stand.. The precipitated product was collected by vacuum filtration to give 0.8 g (7%) of the title compound as an off-white solid.

According to the analysis of related databases, 193354-13-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Sugen, Inc.; US6350754; (2002); B2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

We’ll be discussing some of the latest developments in chemical about CAS: 954255-04-0. Application of 954255-04-0

Example 39 Adamantan-1-yl-(5,6-difluoro-2,3-dihydro-indol-1-yl)-methanone In analogy to the procedure described for the synthesis of adamantan-1-yl-(3,4-dihydro-1H-isoquinolin-2-yl)-methanone (example 1) the title compound was prepared from 5,6-difluoroindoline and adamatanecarbonyl chloride as light brown solid. MS(m/e): 318.3 (MH+).

Because a catalyst decreases the height of the energy barrier, its presence increases the reaction rates of both the forward and the reverse reactions by the same amount.Read on for other articles about 954255-04-0.

Reference:
Patent; Hoffmann-La Roche Inc.; Kimbara, Atsushi; Grether, Uwe; Nettekoven, Matthias; Puellmann, Bernd; Rogers-Evans, Mark; Schulz-Gasch, Tanja; US2015/111886; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

SDS of cas: 39603-24-2,When developing chemical systems it’s of course important to gain a deep understanding of the chemical reaction process.

General procedure: A solution of an isatin (3) (1 mmol), a C-H acidderivative (2) (1 mmol), and naphthalen-1-amine (1)(1 mmol) was heated at 80 C in acetic acid (5 mL)for 24 h. After completion of the reaction as indicatedby TLC (MeOH/AcOEt, 1:4), the residue wasfiltered and washed successively with gl. acetic acid andCHCl3 (3 × 10 ml). The crude product thus obtainedwas crystallized from MeOH or EtOH and dried atroom temperature. The final product was obtained as a powder.

In the meantime we’ve collected together some recent articles in this area about 39603-24-2 to whet your appetite. Happy reading!

Reference:
Article; Rahmati, Abbas; Eskandari-Vashareh, Miranda; Journal of Chemical Sciences; vol. 126; 1; (2014); p. 169 – 176;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 114041-16-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 114041-16-6 as follows.

General procedure: Compound 8 (70.6 mg, 0.24 mmol) and 5,6-dimethoxyisoindoline(68.5 mg, 0.38 mmol) were dissolved in CH3CN (30 mL), followed by addition of K2CO3 (138.8 mg, 1.00 mmol). The mixture was heated under reflux and stirred at 90 C for 6 h. After cooling and filtration, the solvent was removed under reduced pressure. The residue was purified by silica gel chromatography (petroleum ether/ethyl acetate/triethyamine) = 10:10:1, v/v/v) to afford 13(56.8 mg, 59%)

According to the analysis of related databases, 114041-16-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Wang, Liang; Ye, Jiajun; He, Yingfang; Deuther-Conrad, Winnie; Zhang, Jinming; Zhang, Xiaojun; Cui, Mengchao; Steinbach, Joerg; Huang, Yiyun; Brust, Peter; Jia, Hongmei; Bioorganic and Medicinal Chemistry; vol. 25; 14; (2017); p. 3792 – 3802;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., Recommanded Product: 20870-90-0

To a solution of 5-bromo-1-methyl-1 ,3-diotahydro-indol-2-one (CASNo. 20870-90-0, 4.07 g, 18.00 mmol). in DMSO (50 mL) was added biotas(pinaco.ato)diboron (5 03 g, 19.80 mmol), and potassium acetate (5.30 g, 54 0 mmol) Next, [1 , 1 ‘-biotas(diphenylphosphiotano)- ferrocene]-d(chloropalladiotaum(ll) complexed with dichloromethane (CASNo. 72287-26-4, 0 417 g, 0 540 mmol) was added The reaction mixture was degassed by bubbling nitrogen through the solution for 3 minutes The reaction was then heated at 80 C for 18 hr The reaction was then poured into ice-water and extracted three times with diethyl ether, The organic extracts were combined, washed with brine, dned over anhydrous sodium sulfate, filtered and concentrated The resulting residue was purified by silica gel flash chromatography (ethyl acetate-heptane, O to 70%) to afford 1-methyl-5-(4,4,5,5- tetramethyl-(1 ,3,2Jdioxaboro.an-2-yl)-1 ,3-diotahydro-indol-2-one, 1H NMR (400 MHz1 CDCI3) delta ppm 1 35 (s, 12 H), 3.23 (s, 3 H), 3.51 (s, 2 H), 6 83 (d, J=7,6 Hz, 1 H), 7.69 (S1 1 H)1 7,77 (d, J= 7 8 Hz, 1 H),

As always, wish you can browse a selection of our May HOT articles below about 5-Bromo-1-methyl-2-oxoindoline.

Reference:
Patent; NOVARTIS AG; ADAMS, Christopher Michael; CHAMOIN, Sylvie; HU, Qi-Ying; ZHANG, Chun; WO2010/130794; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

We’ll be discussing some of the latest developments in chemical about CAS: 20870-90-0. Related Products of 20870-90-0

General procedure: To a precooled stirring suspension of NaH (6.0 mmol, 0.144 g) in THF (10 mL) at -78 C was added a solution of N-methyloxindole (5a) (6.0 mmol, 0.883 g) in THF (10 mL) dropwise. Then the cooling bath was removed and stirring continued for 5 min (till the formation of clear solution). Then the reaction mixture was again cooled to -78 C and a solution of methyl 3-hydroxy-2-methylene-3-phenylpropanoate (6a) (2.0 mmol, 0.468 g) in THF (15 mL) was added dropwise over 30 min. After stirring for further 10 min at the same temperature, the cooling bath was removed and the reaction was quenched with saturated NH4Cl solution and extracted with EtOAc (3×30 mL). Combined organic layer was dried over anhydrous Na2SO4.. Solvent was removed and the crude obtained was purified by column chromatography(10-15% EtOAc in hexanes) provided title compound (7a) (0.539 g) as a colorless solid in 84% yield.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 5-Bromo-1-methyl-2-oxoindoline.

Reference:
Article; Basavaiah, Deevi; Lingam, Harathi; Babu, Thelagathoti Hari; Tetrahedron; vol. 74; 19; (2018); p. 2306 – 2313;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Career opportunities within science and technology are seeing unprecedented growth across the world, and those who study chemistry or another natural science at university now have increasingly better career prospects. Application of 16800-68-3

General procedure: A mixture of oxindole 1 (0.30 mmol), allenoate 2 (0.75 mmol), PPh3 (0.045 mmol) in xylene (2.0 mL, dried over 4 A MS) was stirred at 50 C under Ar atmosphere for 24 h. After completion of the reaction (indicated by TLC), the mixture was quenched with saturated NaCl solution and diluted with EtOAc, followed by washing with H2O and saturated NaCl solution, and finally dried over Na2SO4. The crude product was purified by flash column chromatography to provide the corresponding product 3.

The synthetic route of 16800-68-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhang, Ji-Quan; Li, Shu-Min; Wu, Chun-Feng; Wang, Xing-Lan; Wu, Ting-Ting; Du, Yao; Yang, Yuan-Yong; Fan, Ling-Ling; Dong, Yong-Xi; Wang, Jian-Ta; Tang, Lei; Catalysis Communications; vol. 138; (2020);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 20870-79-5 as follows. Application In Synthesis of 5-Nitroindolin-2-one

To a suspension of the lactam (10.0 g, 56 mmol) in 200 ml of 1 ,2-dichloroethane, was added POBr3 (15.3g, 53.2 mmol) at RT. The resulting mixture was heated at reflux temperature in a 9OC oil bath for 0.5 hour (the reaction formed a copious amount of precipitate, and an oil bath was preferred over a heating mantle, as it provided gentle heating and avoided a darkening of the precipitate). The reaction was cooled just below reflux temperature, and imidazole (4.57 g, 62 mmol) was added in one portion. The resulting gummy suspension was heated at reflux temperature in an oil bath for another 2 hours. The reaction was cooled to RT, and 100 mL of ice-water was added. Solid NaHCO3 (ca. 50 g) was added to the mixture until no further gas was evolved. The suspension was extracted with DCM (4chi), and the combined DCM extracts were washed with 300 mL of brine. The DCM extracts were filtered through silica gel and concentrated to dryness to afford a crude product. The crude product was recrystallized from chloroform to give 5.41 g of the desired compound as a white solid. The filtrate was concentrated to dryness, and the residue was purified by flash column chromatography (30% EtO Ac/Hex) to give an additional 2.6 g of desired product. MS (ESI) m/e (MH-H+): 242.

You can also check out more blogs about 20870-79-5.

Reference:
Patent; MERCK SHARP &; DOHME CORP.; COBURN, Craig, A.; MCCAULEY, John, A.; LUDMERER, Steven, W.; LIU, Kun; VACCA, Joseph, P.; WU, Hao; HU, Bin; SOLL, Richard; SUN, Fei; WANG, Xinghai; YAN, Man; ZHANG, Chengren; ZHENG, Mingwei; ZHONG, Bin; ZHU, Jian; WO2010/111483; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 16800-68-3, name is 1-Acetylindolin-3-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Synthetic Route of 16800-68-3

General procedure: 1a (35.0 mg, 0.2 mmol, 1 equiv.), tert-BuOK (22.4 mg, 0.2 mmol, 1.0 equiv.) were added to a Schlenk tube. Then 2 ml THF was added using a syringe. The reaction mixture was stirred 15min,and then added iodonium salt 2 (0.2 mmol, 1.0 eq). The reaction was stirred at 30C for 10 hours.After cooling to room temperature, the solvent was removed in vacuo and the residue was purifiedby silica gel using a proper eluent (EtOAc/Hexane) to afford the desired products

This is the end of this tutorial post, and I hope it has helped your research about 16800-68-3.

Reference:
Article; Zhang, Yanxia; Han, Jianwei; Liu, Zhen-Jiang; Synlett; vol. 26; 18; (2015); p. 2593 – 2597;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem