Category: indolines-derivatives

Recommanded Product: 1127-59-9, The prevalence of solvent effects in heterogeneous catalysis has motivated developing quantitative kinetic, spectroscopic, and theoretical assessments of solvent structures and their interactions with reaction intermediates and transition states.

General procedure: Mg(ClO4)2 (10 mol %) was added to a mixture of isatin (2 mmol), malononitrile or ethyl cyanoacetate (2mmol), and dimedone (2 mmol) in aqueous ethanol solution(50%, v/v, 5 mL), and the resulting mixture was stirred at 50C for 30-60 min. Upon completion of the reaction (TLC),the mixture was allowed to cool to room temperature. The resulting solid was filtered and washed successively with water (2 × 30 mL) and cold aqueous ethanol (2 × 1 mL) to afford pure product 4.

According to the analysis of related databases, 1127-59-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Wu, Chunlei; Shen, Runpu; Chen, Jianhui; Hu, Chunqi; Bulletin of the Korean Chemical Society; vol. 34; 8; (2013); p. 2431 – 2435;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

SDS of cas: 3484-35-3,You could be based in a pharmaceutical company, working on developing and trialing new drugs; or in a public-sector research center, helping to ensure national healthcare provision keeps pace with new discoveries.

General procedure: To a solution of 3-substituted-5-benzylidene-2-thioxo-4-thiazolidinone (1-19) (0.003 mol) in 1,4-dioxane (15 mL) was added HC(OEt)3(2 mL) and BF3Et2O (2 mL). The reaction mixture washeated to 80 C and stirring was continued at the same temperature for 4 h. Theresulting 2-ethylthio-3-substituted-5-benzylidene- 4-thiazolium fluoroborate (Ic, IIc) was precipitated, filteredoff, and dried without any additional purification, as starting material forthe following reactions. To a mixture of thiazolium fluoroborate (Ic, IIc) (0.003 mol) and correspondingindolin-2-one (0.003 mol) in acetonitrile (15 mL) was added triethylamine (0.91g, 0.009 mol) dropwise at 25 C, and the mixture was stirred for 4 h at thesame temperature. The orange precipitate was collected and washed with ethylacetate (8 mL). The crude product thus obtained was recrystallized from methanol or acetone to give compound (1-19).

We are continuing to develop the new Research Structures and WebCSD systems in response to feedback from you, our user community, so we would love to hear what you think about the enhanced search functionality and any suggestions you might have about 3484-35-3.

Reference:
Article; Wang, Feng; Liu, Zijian; Wang, Jian; Tao, Jun; Gong, Ping; Bao, Xue; Zhao, Yanfang; Wang, Yulin; European Journal of Medicinal Chemistry; vol. 101; (2015); p. 126 – 132;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Career opportunities within science and technology are seeing unprecedented growth across the world, and those who study chemistry or another natural science at university now have increasingly better career prospects. Application of 675109-45-2

6-Ammnoisoindolin-1-one (15.34 mg, 0.104 mmol) was dissolved in DCM (1.0 mL) along with pyridine (0.039 mL, 0.487 mmol) and DIEA (0.032 mL, 0.183 mmol). Intermediate 14SF (28 mg, 0.061 mmol) in 2 mL of DCM was added dropwise, and the reaction mixture was stirred at room temperature for 50 minutes. The reaction was quenched with 1.0 N HC1 (0.5 mL). All solvent was removed under vacuum. The crudewas dissolved in DMSO/THF (2:1, 6 mL) and purified via preparative LC/MS (method C,40-100% B over 18 mm, then a 5-mm hold at 100% B). Fractions containing the desired product were combined and dried via centrifugal evaporation to yield Example 178 (10.7 mg, 31% yield). ?H NMR (500MHz, DMSO-d6) 8.72 (s, 1H), 8.56 (s, 1H), 8.51 (br. s., 1H), 7.86 (d, J=10.7 Hz, 2H), 7.81 (br. s., 2H), 7.61 (br. s., 1H), 7.46 (d, J=5.8 Hz, 1H),5.48-5.38 (m, 1H), 4.54 (d, J12.2 Hz, 1H), 4.41 (dd, J=12. 1, 7.2 Hz, 1H), 4.29 (s, 2H),4.08 (s, 3H), 3.64 (dd, J15.9, 9.8 Hz, 1H), 3.36 (d, J=13.7 Hz, 1H), 2.62 (s, 3H);LC-MS: method C, 2 to 98% B. RT = 2.21 mm, MS (ESI) m/z: 572.30 (M+H).Analytical HPLC purity (method B): 100%.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 675109-45-2.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; ZHANG, Xiaojun; PRIESTLEY, Eldon Scott; HALPERN, Oz Scott; JIANG, Wen; REZNIK, Samuel Kaye; RICHTER, Jeremy M.; (545 pag.)WO2018/13776; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

SDS of cas: 169037-23-4, Having gained chemical understanding at molecular level, chemistry graduates may choose to apply this knowledge in almost unlimited ways, as it can be used to analyze all matter and therefore our entire environment.

Diethylcyanomethylphosphonate (279 mg, 1.58 mmol) was dissolved in dry THF (6 mL) at 0oC. Sodium hydride (66 mg, 1.15 mmol) was added and, to the resulting suspension, 5-trifluoromethoxyistain (347 mg, 1.50 mmol) was added slowly. Upon completion of the reaction as shown by TLC analysis, water (10 mL), brine (10 mL) and ethyl acetate (10 mL) were added and the aqueous layer extracted with ethyl acetate (3 x 5 mL) and dried with Na2SO4. The solvent was evaporated in vacuo and the resulting solid was purified by column chromatography (PSp:EtOAc 1:0 to 1:1) to yield a yellow product (31%), 1H NMR (400 MHz, CDCl3): d 6.39 (s, 1H), 6.91 (d, J 8.7, 1H), 7.26-7.31 (m, 1H), 7.84 (br s, 1H), 7.94 (d, J 1.9, 1H); 13C NMR (100 MHz, CDCl3): d 99.8, 111.3, 115.3, 118.9, 120.43 (q, J 258), 120.6, 126.9, 141.3, 142.5, 144.8 (q, J 2.1), 165.9; IR (neat, cm-1): 3254, 2228, 1760, 1728, 1624, 1473, 1245, 1124; HRMS: m/z: [M+Na]+ calcd for C11H5N2O2F3Na, 277.0195; found, 277.0188.

According to the analysis of related databases, 169037-23-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Davis, Holly J.; Kavanagh, Madeline E.; Balan, Tudor; Abell, Chris; Coyne, Anthony G.; Bioorganic and Medicinal Chemistry Letters; vol. 26; 15; (2016); p. 3735 – 3740;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 3339-73-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3339-73-9, name is 3-(1,3-Dioxoisoindolin-2-yl)propanoic acid belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 1.0 mmol of (1,3-dioxoisoindolin-2-yl) acid, N-ethyl-N-dimethylaminopropylcarbodiimide (EDC) (1.1 mmol), hydroxybenzotriazole(HOBt) (1.2 mmol) and N,N-Diisopropylethylamine (2.0 mmol) weremixed in minimum DMF and the obtained mixture was stirred for5 min. Then, 4-aminoquinoline-diamines (1.0 mmol) was added to thereaction mixture and the stirring was continued for 5 h. The reactionend was proved by thin layer chromatography (TLC). Then, DMF wasevaporated using rotary evaporator and cold water (20 mL) was added,and solid precipitates obtained were filtered and washed with coldwater. The crude product was recrystallized in absolute ethanol.

The synthetic route of 3-(1,3-Dioxoisoindolin-2-yl)propanoic acid has been constantly updated, and we look forward to future research findings.

Reference:
Article; Rani, Anu; Legac, Jenny; Rosenthal, Philip J.; Kumar, Vipan; Bioorganic Chemistry; vol. 88; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 25369-33-9,Some common heterocyclic compound, 25369-33-9, name is 7-Chloroindolin-2-one, molecular formula is C8H6ClNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: An oven-dried flask was charged with stir bar, oxindole (0.5 mmol), PIDA (0.25 mmol) in dry acetonitrile (4.0 mL). Then to the reaction mixture TEMPO (0.5 mmol) was added in presence of air and the mixture was stirred at room temperature until complete conversion takes place as indicated by TLC analysis. The resulting reaction mixture was extracted with ethyl acetate (3 10 mL). The combined organics were dried with Na2SO4 and dried under vacuum to afford crude solid. Then the crude product was purified by column chromatography on silica gel.

The synthetic route of 25369-33-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sai Prathima, Parvathaneni; Bikshapathi, Raktani; Rao, Vaidya Jayathirtha; Tetrahedron Letters; vol. 56; 46; (2015); p. 6385 – 6388;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 20870-79-5, A common heterocyclic compound, 20870-79-5, name is 5-Nitroindolin-2-one, molecular formula is C8H6N2O3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The derivatives 1 -5 were synthesized following the synthetic procedure reported in scheme 1 of Figure 1 . The 5-nitro-1 ,3-dihydro-2/-/-indol-2-one commercial compound was reduced to the corresponding 5-amino-1 ,3-dihydro-2H-indol-2-one by means of catalytic hydrogenation using Pd/C as a catalyst. The subsequent reaction with the chloro acetyl chloride provided 2-chloro-/V-(2-oxo-2,3-dihydro-1 /-/-indol-5-yl)acetamide which was condensed with the appropriate amine derivative to provide, respectively, 2-[(6,7-dimethoxy-3,4-dihydroisoquinol-2-(1 H)-yl)]-N-(2-oxo-2,3- dihydro-1 H-indol-5-yl)acetamide and 2-[(3,4-dimethoxybenzyl)amino]-/V-(2-oxo- 2,3-dihydro-1 /-/-indol-5-yl)acetamide. Lastly, condensation of the appropriate aromatic carbaldehyde in the presence of pyrrolidine provided the desired products 1 -5.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; INTERNATIONAL SOCIETY FOR DRUG DEVELOPMENT S.R.L.; RAPPOSELLI, Simona; MARTINI, Claudia; CALDERONE, Vincenzo; PURICELLI, Guido; (30 pag.)WO2016/55454; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 24566-79-8,Some common heterocyclic compound, 24566-79-8, name is N-(6-Bromohexyl)phthalimide, molecular formula is C14H16BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Amixture of the corresponding secondary amine 7a-d (5.5 mmol), anhydrous K2CO3 (6 mmol) andcompounds 2-4 (5 mmol) was added inCH3CN (20 ml). The mixture was heated at 65 C for 8-10 h. Thesolvent was evaporated under reduced pressure. Then water (25 mL) was added,and the mixture was extracted with dichloromethane (20 mL × 3). The combinedorganic phases were washed with saturated aqueous NaCl (30 mL), dried oversodium sulfate, and filtered. The solvent was evaporated under a vacuum. The residue was purified on a silicagel chromatography using mixtures of petroleum/acetone as eluent to obtain theoil products 8-10.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route N-(6-Bromohexyl)phthalimide, its application will become more common.

Reference:
Article; Pan, Wanli; Hu, Ke; Bai, Ping; Yu, Lintao; Ma, Qinge; Li, Tao; Zhang, Xu; Chen, Changzhong; Peng, Kelin; Liu, Wenmin; Sang, Zhipei; Bioorganic and Medicinal Chemistry Letters; vol. 26; 10; (2016); p. 2539 – 2543;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 24566-79-8 as follows. COA of Formula: C14H16BrNO2

General procedure: A mixture of the corresponding secondary amine 3a-d [23] (5.5mmol), anhydrous K2CO3 (6mmol) and compounds 2a-d (5mmol) were added in CH3CN (20ml). The mixture was heated at 65C for 8-10h. The solvent was evaporated under reduced pressure. Then water (25mL) was added, and the mixture was extracted with dichloromethane (20mL×3). The combined organic phases were washed with saturated aqueous sodium chloride (30mL), dried over sodium sulfate, and filtered. The solvent was evaporated under vacuum. The residue was purified on a silica gel chromatography using mixtures of petroleum/acetone as eluent to obtain the oil products 4-7.

According to the analysis of related databases, 24566-79-8, the application of this compound in the production field has become more and more popular.

Reference:
Article; Sang, Zhipei; Qiang, Xiaoming; Li, Yan; Xu, Rui; Cao, Zhongcheng; Song, Qing; Wang, Ting; Zhang, Xiaoyu; Liu, Hongyan; Tan, Zhenghuai; Deng, Yong; European Journal of Medicinal Chemistry; vol. 135; (2017); p. 307 – 323;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 6941-75-9, name is 5-Bromoisoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6941-75-9, name: 5-Bromoisoindoline-1,3-dione

A mixture of Zn powder (1.73 g, 26.154 mmol), copper (II) sulfate pentahydrate (0.02 g, 0.08 mmol) and 2M aq NaOH (27 mL) were cooled to 0 C. 5-Bro moisoindoline-1,3-dione (5 g, 22 mmol) was added at the same temperature over the period of 30 min The reaction mixture was stirred at 0 C. for 30 min and 3 h at ambient temperature. The reaction mixture was filtered and the filtrate was neutralized with concentrated HCl. The reaction mixture was diluted with ethanol and extracted with ethyl acetate. The combined ethyl acetate layer was dried over Na2SO4 and concentrated under reduced pressure to afford the crude title compound as a brown solid, which was used in the next step without further purification (1.3 g): mp 258-261 C.; 1H NMR (400 MHz, DMSO-d6) delta 9.03 (br, 1H), 7.81 (m, 2H), 7.69 (m, 1H), 6.44 (m, 1H), 5.88 (d, J=9.3 Hz, 1H); ESIMS m/z 225.83 ([M-H]-); IR (thin film) 1684, 3246, 606 cm-1.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Bromoisoindoline-1,3-dione, and friends who are interested can also refer to it.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171308; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem