Category: indolines-derivatives

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 22190-33-6 as follows. Computed Properties of C8H8BrN

To a solution of 5-bromo-2,3-dihydro-1H-indole (2.11 g, 10.7 mmol) in 40 mL of THF was added Boc2O (2.56 g, 11.7 mmol). The reaction mixture was stirred at room temperature for 18 hours, and then concentrated under reduced pressure. Purification of the residue via flash chromatography (8% EtOAc in hexane) afforded 5-bromo-2,3-dihydro-indole-1-carboxylic acid tert-butyl ester (2.59 g, 95%) as a white solid; MS (M+H)=298.

According to the analysis of related databases, 22190-33-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Carter, David Scott; Schoenfeld, Ryan Craig; Weikert, Robert James; US2008/45543; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 2058-72-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2058-72-2 as follows.

General procedure: The mixture of corresponding 2-amino-4-arylimidazoles 1 (1.0 mmol), isatin 18 (1.0 mmol) andmalononitrile 12 (1.0 mmol) in 2 mL of 2-propanol was refluxed during 50-60 min. After cooling, the solid products 19 were filtered off and crystallized from iPrOH.

According to the analysis of related databases, 2058-72-2, the application of this compound in the production field has become more and more popular.

Reference:
Article; Lipson, Victoria V.; Pavlovska, Tetiana L.; Svetlichnaya, Nataliya V.; Poryvai, Anna A.; Gorobets, Nikolay Yu.; Van Der Eycken, Erik V.; Konovalova, Irina S.; Shiskina, Svetlana V.; Borisov, Alexander V.; Musatov, Vladimir I.; Mazepa, Alexander V.; Beilstein Journal of Organic Chemistry; vol. 15; (2019); p. 1032 – 1045;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 675109-26-9, name is 6-Bromoisoindolin-1-one, molecular formula is C8H6BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: indolines-derivatives

A mixture of 6-bromoisoindolin-1-one (2.0 g, 9.44 mmol), bis(pinacolato)diboron (2.41 g, 9.7 mmol), KOAc (1.86 g, 18.66 mmol) and Pd(dppf)2C12 (0.39 g, 0.49 mmol) in dioxane (50 mE) was stirred at 1000 C. overnight under a nitrogen atmosphere. The mixture was poured into water and extracted with EtOAc (100 mLx3). The combined organic fractions were washed with brine, dried over sodium sulfate and concentrated under vacuum. The residue was purified by chromatography on silica gel (1/10 to 1/5 EtOAc in pet. ether) to give compound 13A (600 mg, 25% yield) as a white solid. ESI mlz 260.0 [M+1].

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 675109-26-9, its application will become more common.

Reference:
Patent; Seal Rock Therapeutics, Inc.; BROWN, Samuel David; US2018/291002; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 21544-81-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 21544-81-0, name is 4,6-Dimethoxyindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

3,5-dimethoxy aniline (199g, 1.30mol) in diethyl ether (5.0 L) was added inthe flask 5L3 Cooled to 0 C. After 45 minutes the HCl gas (227g)introduced into the solution.at 10C 45 Minutes the mixture was filtered, (4L) and washed withisopropyl acetate, under high vacuum, dried at 45 C Night to give the hydrochloride as a white solid (242.3g, 98%). Under stirring the above hydrochloride (20g, 0The mixture.105mol) and oxalyl chloride (33 mL of) isequipped with a reflux condenser, 3-neck flask was heated 2 Hour (170 C externaltemperature), oxalyl chloride was distilled off from the reactionmixture. The flask was cooled to 0 C, was added methanol (40mL). The reactionmixture was heated at reflux for 45 minutes, filtered while hot, with A Alcohol(80mL) and washed to give a yellow-green solid4,6-dimethoxy isatin (17.2g, 79%). After 2 Hour to isatin (162g,0.78mol) was heated in aqueous NaOH solution(40%, 1.5L) in (externalTemperature 70 C) was slowly added to H 2 O 2(35%, 405mL). H 2 O 2 was added after each batch, the internal temperature of the reaction Degree(initially 64 C) increase (to a maximum temperature of 80 C). Afterthe addition was complete, then at 70 C will blister The reaction mixture wasstirred for an additional 2hours, the mixture was stirred overnight while cooling to roomtemperature. The mixtureIt was heated to 70 C. An additional H 2 O 2 (75mL), at 70 C and themixture was stirred for an additional 2 Hours until the reaction was complete.Cooled to 10 C (bath temperature), a solution of Na 2 S 2 O 3 solution (150mL, saturation). The mixture was washed with HCl (37%, 1.6L) was adjusted to pH8, with acetic acid(glacial acetic acid, 75mL) transfer To pH6, while not allowing thereaction mixture was warmed exceed 40 C. The reaction mixture was filtered,washed with water (4L) and washed to give the desired brownsolid amino acid (83.7g, 55%). The amino acid (82.7g, 0.42mol) (4.2L) was added in dry THF EDCl (89.2g, 0.48mol), HOBT(65g, 0.48mol) and NMM (51.3mL), and the mixturewas stirred at roomtemperature for 3 hours. Adding NH3 Aqueoussolution (83mL, 50%), and the mixture was stirred at room temperature for 16 hours.Was added water (1.25L), the The mixture (2 × 250mL) and extracted with DCM.Then the combined extracts were washed with water (2 × 500mL) washed Fandi.Concentrated, slurried with ethyl ether (550mL), filtered, and dried under highvacuum to afford a brown The solid4,6-dimethoxy-2-amino-benzamide (46.7g, 57%).2-Amino-4,6-dimethoxy – benzamide (1.06g, 5.4mmol), 3,5- dimethyl-4-hydroxy Benzaldehyde (0.810g,5.4mmol), K 2 CO 3 (0.747g, 5.4mmol) and I 2(1.645g, 6.5mmol) DMF (20mL) in mixing, at 80 C and the reaction mixture was heated for 12 hours. It was cooledto Room temperature, poured onto crushed ice. The solid was collected, whichwas purified by column chromatography to give a white solid State of 2- (4-hydroxy-3,5-dimethylphenyl)-5,7-dimethoxy-quinazolin -4 (3H) – one (0.9g, 51%). Selected data:MP291-293 C.

The synthetic route of 4,6-Dimethoxyindoline-2,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; RESVERLOGIX CORP; HANSEN, H; (62 pag.)CN103319408; (2016); B;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 446292-07-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 446292-07-5, name is (R)-2-(2-Hydroxy-3-((4-(3-oxomorpholino)phenyl)amino)propyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a 2 litre 4 Neck RBF, charge Toluene (830 ml), Compound (IV) (100 gms). Stirr the reaction mass and cool to 10-15C. Charge N,N-carbonyl-diimidazole (82 gms). Reflux the reaction mass at 105-110C for 2 hrs. Cool the reaction mass to 55-60C and charge methanol (170 ml). Cool the reaction mass further to 25-30C and filter. Wash the residue with Methanol (50 gms). Dry the solid under vacuum. Dry Wt: 100 gms (Theoretical yield: 93.80%); Purity: 99.78%

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (R)-2-(2-Hydroxy-3-((4-(3-oxomorpholino)phenyl)amino)propyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MEHTA API PVT. LTD.; KHAN, Rao, Uwais, Ahmad; SONI, Amit Manohar; MALI, Sanjay, Gunda; (29 pag.)WO2016/199027; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 6341-92-0, name is 6-Chloroisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6341-92-0, Formula: C8H4ClNO2

Weigh rapamycin (0.05mmol), isatin 3h (0.10mmol) and rhodium octanoate dimer(0.0005mmo),They were placed in a reaction flask, 2.0 mL of dry dichloromethane was added, and after stirring at room temperature for 5 minutes,Phenyldiazo 2a (0.10 mmol) was weighed and dissolved in dry dichloromethane (1.0 mL), and slowly added dropwise to the reaction system (about 1 hour), and stirring was continued for half an hour.The solvent was removed by rotary distillation to give a crude product. The rapamycin analog I-h was obtained by column chromatography (eluent: petroleum ether: ethyl acetate = 1:10 to 1:4).The yield was 82%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Chloroisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Ha Yao Cihang Pharmaceutical Co., Ltd.; Changsha Tianci Bio-pharmaceutical Technology Co., Ltd.; Changsha Cihang Pharmaceutical Institute Co., Ltd.; Duan Yanwen; Huang Yong; Qiu Lin; Wen Zhongqing; Su Meng; (38 pag.)CN109776571; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 3339-73-9 as follows. Quality Control of 3-(1,3-Dioxoisoindolin-2-yl)propanoic acid

A solution of 28 (2.000 g, 9.12 mmol), DPPA (1 .966 mL, 9.12 mmol, 1 eq) and TEA (2.543 ml, 2 eq, 1 8.25 mmol) in dry toluene (60 mL) was stirred at rt, under a nitrogen atmosphere. After disappearance of starting materials by TLC (approximately 1 hour), the mixture was refluxed to promote conversion to the isocyanate. After evolution of nitrogen gas had ceased, the reaction mixture was split into half (by volume). 2-aminophenol (747 mg, 1.5 eq, 6.84 mmol) was added to one half of the isocyanate solution and stirred under reflux for 16 hours. On cooling to rt a yellow precipitate formed, which was collected by filtration (suction) and washed with EtOAc. On drying, 867 mg of pale yellow solid was obtained requiring no further purification.

According to the analysis of related databases, 3339-73-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; THE UNIVERSITY OF NOTTINGHAM; MISTRY, Shailesh; DARAS, Etienne; FROMONT, Christophe; JADHAV, Gopal; FISCHER, Peter Martin; KELLAM, Barrie; HILL, Stephen John; BAKER, Jillian Glenda; WO2012/4549; (2012); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 20780-72-7, name is 4-Bromoisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 20780-72-7, category: indolines-derivatives

General procedure: To a solution of isatin derivative (0.68mmol, 1.0eq) in DMF (4mL) was added K2CO3 (0.68mmol, 1.0eq) at room temperature, the mixture was stirred for about 30min, and then the propargyl bromide (0.75mmol, 1.1eq) was added dropwise. The mixture was stirred for 6?10hat room temperature depending on the isatin derivative used. Upon completion, EtOAc and H2O were added. The aqueous layer was extracted with EtOAc; the combined organic layers were washed with H2O for several times to remove the DMF, and then washed with brine, dried over MgSO4 and evaporated to give the products. Yellow solid, yield: 89percent, m. p.: 153.1?154.9°C, Rf=0.26 (petroleum ether/ethyl acetate=2/1). 1H NMR (400MHz, CDCl3) delta 7.49 (t, J=8.0Hz, 1H), 7.33 (d, J=8.1Hz, 1H), 7.11 (d, J=7.9Hz, 1H), 4.57 (d, J=2.5Hz, 2H), 2.34 (t, J=2.5Hz, 1H).13C NMR (100MHz, CDCl3) delta 179.90, 156.21, 151.10, 138.42, 128.93, 121.74, 116.52, 109.86, 75.36, 73.67, 30.94, 29.53

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Bromoisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Yu, Bin; Qi, Ping-Ping; Shi, Xiao-Jing; Huang, Ruilei; Guo, Hao; Zheng, Yi-Chao; Yu, De-Quan; Liu, Hong-Min; European Journal of Medicinal Chemistry; vol. 117; (2016); p. 241 – 255;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 150560-58-0, name is 5-Isopropylindoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 150560-58-0, Application In Synthesis of 5-Isopropylindoline-2,3-dione

General procedure: A suspension mixture of N-(2,3,4,6-tetra-O-acetyl-beta-d-glucopyranosyl)thiosemicarbazide 2 (2mmol, 0.84g) and appropriate substituted isatin 3a-l (2mmol) and glacial acetic acid (0.02mL) in absolute ethanol was microwave irradiated for 5-15min (depending on substituents on benzene ring of isatins). After irradiating for 1-3min, the suspension mixture became a clear solution. The irradiation was continued in a given time. At the end of reaction process, the precipitate appeared. Upon completion, monitored by TLC, the reaction mixture was cooled to room temperature; the color precipitate was filtered with suction. The crude product was recrystallized from 96% ethanol or mixture of toluene-96% ethanol (2:1 in volume) to afford the title compounds of substituted isatin N-(2,3,4,6-tetra-O-acetyl-beta-d-glucopyranosyl) thiosemicarbazones 4a-l. The spectral (FT-IR, 1H NMR, 13C NMR and ESI-MS or EI-HRMS) data are in good agreement with their structures.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Thanh, Nguyen Dinh; Giang, Nguyen Thi Kim; Quyen, Tran Ha; Huong, Doan Thi; Toan, Vu Ngoc; European Journal of Medicinal Chemistry; vol. 123; (2016); p. 532 – 543;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 59-48-3, The chemical industry reduces the impact on the environment during synthesis 59-48-3, name is Indolin-2-one, I believe this compound will play a more active role in future production and life.

An oven-dried flask was charged with oxindole (133 mg, 1 mmol, 1 equiv) before the addition of anhydrous DMF (0.8 M, 1.25 mL) and dibromoethane (94 muL, 1.1 mmol, 1.1 equiv). The solution was then cooled to 0 C before the addition of NaH (60% dispersion in mineral oil, 180 mg, 4.5 mmol, 4.5 equiv) portionwise over 20 min. The mixture was then warmed to r.t. and stirred overnight, then the reaction was quenched with H2O (3 mL) and the mixture was extracted with EtOAc (5 mL). The organic layers were then washed with H2O (2 × 5mL) and brine (2 × 5 mL) and passed through a hydrophobic frit and concentrated under vacuum before being purified (silica gel; EtOAc/petroleum ether, 20-40%) to afford the desired product. Yield: 23 mg (14%); red/brown amorphous solid. IR (solid): 3200, 1701, 1684, 1671, 1627, 1474, 1357 cm-1. 1H NMR (400 MHz, CDCl3): delta = 8.34 (s, 1 H), 7.19 (t, J = 7.7 Hz, 1 H), 7.01 (t, J = 7.5 Hz, 1 H), 6.96 (d, J = 7.7 Hz, 1 H), 6.83 (d, J = 7.4 Hz, 1 H), 1.76 (d, J = 3.0 Hz, 2 H), 1.54 (d, J = 2.9 Hz, 2 H). 13C NMR (101 MHz, CDCl3): delta = 179.1, 140.6, 131.3, 126.7, 122.0, 118.6, 109.7, 27.4, 19.5. HRMS (NSI): m/z [M + H]+ calcd for C10H10NO: 160.0757; found: 160.0753.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Indolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Seath, Ciaran P.; Fyfe, James W. B.; Molloy, John J.; Watson, Allan J. B.; Synthesis; vol. 49; 4; (2017); p. 891 – 898;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem