Category: indolines-derivatives

Synthetic Route of 3485-84-5, These common heterocyclic compound, 3485-84-5, name is N-Vinylphthalimide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a sealed tube under argon atmosphere, were introducedcompound 4 (4.74 g, 20 mmol), DMF (20 mL), triethylamine(11.16 mL, 80 mmol), palladium diacetate (225 mg, 1 mmol), tri(otolyl)-phosphine (609 mg, 2 mmol) and N-vinylphthalimide (5.20 g,30 mmol). The mixturewas stirred at 110 C for 3 h and hydrolyzed.The formed solid was solubilized in CH2Cl2, washed with water andbrine, dried over MgSO4 and evaporated under reduced pressure.The crude productwas recrystallized from acetonitrile to afford 7 asa white solid (91% yield)

Statistics shows that N-Vinylphthalimide is playing an increasingly important role. we look forward to future research findings about 3485-84-5.

Reference:
Article; Landagaray, Elodie; Ettaoussi, Mohamed; Rami, Marouan; Boutin, Jean A.; Caignard, Daniel-Henri; Delagrange, Philippe; Melnyk, Patricia; Berthelot, Pascal; Yous, Said; European Journal of Medicinal Chemistry; vol. 127; (2017); p. 621 – 631;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3891-07-4, name is 2-(2-Hydroxyethyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., SDS of cas: 3891-07-4

Preparation of Ethyl 4-[2-(PHTHALIMIDO) ETHOXY] ACEFOACETATE (X1 A 250 mL two-necked flask, equipped with a magnetic stirring bar, thermometer and a pressure equalized addition funnel was charged with 75 mL of tetrahydrofuran under nitrogen atmosphere. 7.53 g Sodium hydride (60% dispersed in oil) was added and the resulting suspension was cooled to-10 C and 20 g of N- (2-HYDROXYETHYL) PHTHALIMIDE was added slowly over 5 minutes. The resulting slurry was stirred at-10 C for 30 minutes. To this mixture a solution of 16.35 g ethyl 4-chloroacetoacetate in 30 ML of TETRAHYDRAFURAN was added at-10 C in 40 minutes. The reaction mixture was warmed to room temperature and then stirred at room temperature for 18 hours. The reaction mixture was placed in an ice bath and quenched by dropwise addition of 10 mL ethanol. The mixture was then poured into 150 mL of IN hydrochloric acid solution in crushed ice and 200 ML of ethyl acetate was added. The resulting mixture was transferred into a separatory funnel and the aqueous phase was separated. The organic phase was first washed with 70 mL of ethyl acetate was added. The resulting mixture was transferred into a separatory funnel and the aqueous phase was separated. The organic phase was first washed with 70 mL of 5 wt. % OF NAHC03 solution, then with 150 ML of water, dried over 5 G of MgS04. MgS04 was filtered off and the filtrate was concentrated in vacuo to give a light brown oily product. The oil was washed with 15 mL of hexane to remove the mineral oil to give 17.2 g of ethyl 4- [2- (phthalimido) ethoxy] acetoacetate light brown product. (yield 51%, rel. compound purity > 80%). IR (KBR, CM~L) : 2995 and 1716. 1H-NMR (CDC13) 6 7.76 (dd, 2H), 7.65 (dd, 2H), 4.11 (S, 2H), 4.02 (q, 2H), 3.80 (t, 2H), 3.70 (t, 2H), 3.37 (s, 2H), 1. 16 (t, 3H). 13C-NMR (CDC13) 8 201.7, 168.4, 167.2, 134.3, 132.2, 123.5, 75.6, 68.7, 61.6, 46.0, 37.4, 14.3.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; EOS ECZACIBASI OZGUN KIMYASAL URUNLER SANAYI VE TICARET A.S.; WO2004/58711; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 32692-19-6, name is 5-Nitroindoline, A new synthetic method of this compound is introduced below., Recommanded Product: 5-Nitroindoline

General procedure: We described the synthesis of the compound 1 (Table 2) to illustrate the general procedure for TFA accelerated Petasis three-component reaction. The descriptions of the preparations of all reported compounds are in the Supporting information section. To a magnetically stirred mixture of 5-nitroindoline (0.164 g, 1.0 mmol), 4-tolyboronic acid (0.135 g, 1.0 mmol), and glyoxylic acid monohydrate (0.092 g, 1.0 mmol) in CH2Cl2 (5 ml) was added TFA (20 mul). The mixture was stirred at room temperature for 4 h. After the completion of the reaction (TLC monitoring), half of the solvent was evaporated by means of a rotovap. The resulting solid was filtered through a sintered glass funnel. The collected solid was thoroughly washed with petroleum ether and a small amount of ice water (5 ml), and then dried in vacuo at room temperature for 24 h to afford 0.26 g (83.3 %) of 2-(5-nitroindolin-1-yl)-2-(p-tolyl) acetic acid as a light yellow solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Zhang, Jing; Yun, Fan; Xie, Rui; Cheng, Chunhui; Chen, Guangyao; Li, Jingxuan; Tang, Pingwah; Yuan, Qipeng; Tetrahedron Letters; vol. 57; 35; (2016); p. 3916 – 3919;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 924304-73-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 924304-73-4 name is 4-Chloroisoindoline hydrochloride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Step 4: Synthesis of (3J?,5S)-1-((S)-4-(but-3-enyIoxy)-2-(tert- butoxycarbonylamino)butanoyl)-5-((li?,25)-1-(ethoxycarbonyl)-2- vinylcyclopropylcarbamoyl)pyrrolidin-3-yl 4-chIoroisoindoline-2-carboxylate[0489] (17?,25)-ethyl l-((25,4i)-1-((5)-4-(but-enyloxy)-2-(tert- butoxycarboalphaylamino)butanoyl)-4-hydroxypyrrolidine-2-carboxamido)-2- vinylcyclopropanecarboxylate (0.55 g, 1.1 mmol) in THF (20 mL) was added 1,1 ‘- carbonyldiimidazole (0.204 g, 1.26 mmol) in one portion. The reaction was stirred at room temperature for 3 hours. To the reaction was then added the N-ethyl-N-isopropylpropan-2- amine (0.92 mL, 5.3 mmol), followed by 4-chloroisoindoline hydrochloride (0.258 g, 1.37 mmo.). The reaction was stirred at 50 C for 18 hours. The solvent was removed. The residue was partitioned between ethyl acetate (20 mL) and saturated sodium bicarbonate solution. The organic layer was separated and dried over sodium sulfate. After removal of solvent, the residue was purified by chromatography (HexanerEthyl acetate=l :3) to give (3i?,5£)-1-((S)-4- (but-3-enyloxy)-2-(tert-butoxycarbonylamino)butanoyi)-5-(( IR,2S)- 1 -(ethoxycarbonyl)-2- vinylcyclopropylcarbamoyl)pyrrolidin-3-yl 4-chloroisoindoline-2-carboxylate as white solid (0.49 g, 66%). MS: Calcd.: 702.3; Found: [M+H]+ 703.1.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Chloroisoindoline hydrochloride, and friends who are interested can also refer to it.

Reference:
Patent; INTERMUNE, INC.; ARRAY BIOPHARMA, INC.; WO2008/137779; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 59-48-3, name is Indolin-2-one, molecular formula is C8H7NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of Indolin-2-one

Step 1 Oxindole (20.0 g; 0.15 mol) and lithium chloride (21.0 g; 0.49 mol) were suspended in tetrahydrofuran (400 mL) and the mixture cooled to -78° C. n-Butyllithium (120.0 mL; 0.30 mol, 2.5M in hexanes) was added slowly and the mixture was stirred for 20 minutes, then iodomethane (18.7 mL; 0.30 mol) was added. The mixture was warmed to 25° C., stirred overnight and then quenched with saturated aqueous ammonium chloride and diluted with diethyl ether. The organic layer was washed with water and brine, dried over magnesium sulfate, filtered and concentrated under reduced pressure. Purification by flash chromatography (0-20percent ethyl acetate-hexane) afforded 10.0 g (41percent) of 3,3-dimethyl-1,3-dihydro-indol-2-one as a yellow solid. MS (ESI) m/z 162 ([M+H]+).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 59-48-3, its application will become more common.

Reference:
Patent; Wyeth; US2007/72897; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 24566-79-8, name is N-(6-Bromohexyl)phthalimide, A new synthetic method of this compound is introduced below., Formula: C14H16BrNO2

To the 500 ml RB-flask was added 4-phenylpiperidine hydrochloride (5 g, 25 mmol), N-(6-bromohexyl)phthalimide (15.5 g, 50 mmol), N,N-diisopropylethylamine (21.8 ml, 125 mmol), tetrabutylammonium iodide (0.2 g), and dioxane (250 ml) at room temperature. The reaction mixture was stirred at 100 C. for 72 h. The solvent was removed in vacuo and the crude product was purified by flash chromatography (98:2=Chloroform:2N ammonia in methanol) to afford 7.67 g of the desired product (77% yield): 1H NMR (400 MHz, CDCl3) delta 7.78-7.79 (m, 2H), 7.74-7.65 (m, 2H), 7.32-7.14 (m, 5H), 3.69 (t, 2H, J=7.35 Hz), 3.06 (d, 2H, J=11.0 Hz), 2.49 (quintet, 1H, J=7.6 Hz), 2.36 (t, 2H, J=7.6 Hz), 2.02 (t, 2H, J=12.5 Hz), 1.82 (br s, 4H), 1.69 (t, 2H, J=6.3 Hz), 1.54 (br s, 2H), 1.37 (br s, 4H); ESMS m/e: 391.3 (M+H)+; Anal. Calc. for C25H30N2O2+0.2H2O: C, 76.19; H, 7.77; N, 7.11. Found: C, 76.14; H, 7.38; N, 7.13.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Synaptic Pharmaceutical Corporation; US6727264; (2004); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 18711-13-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 18711-13-2, name is 4,7-Dichloroindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows.

In these schemes, ketone (4.0 equiv.) and a catalytic amount of diethylamine (10 drops) are added to a solution of substituted isatin (1.0 equiv.) in methanol (5 mL). The mixture is stirred at room temperature until starting material (substituted isatin) disappears completely. The resulting solution is concentrated and applied to flash chromatography eluting with hexane / ethyl acetate to afford pure product in quantitative yield. Further purification is done by recrystallization with hexane / ethyl acetate. An example compound synthesized by the above scheme includes: 4,7-Dichloro-3- hydroxy-3-[2-(4-methoxyphenyl-2-oxoethyl)]-l,3-dihydroindol-2-one: white solid; mp 149- 151 C; 1H NMR (DMSO, 400 MH 1 z) delta 10.93 (s, 1H), 7.86 (d, 2H, J = 9.2 Hz), 7.26 (d, 1H, J = 8.8 Hz), 6.98 (d, 2H, J= 8.8 Hz), 6.86 (d, 1H, J = 8.4 Hz), 6.39 (s, 1H), 4.31 (d, 1H, J= 18.0 Hz), 3.80 (s, 3H), 3.61 (d, 1H, J= 18.0 Hz).

The chemical industry reduces the impact on the environment during synthesis 4,7-Dichloroindoline-2,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Patent; TOKALAS, INC.; VERNIER, Jean-michael; (82 pag.)WO2016/57698; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 667463-64-1, name is 6-Bromo-1-methylindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C9H6BrNO2

1-4.1 (15.0 g, 63 mmol) and hydrazine hydrate (30 mL, 618 mmol) are heated to 125 C for 72 h. To the cool reaction mixture DCM is added and extracted with water and 1 M HC1. The organic layer is dried over MgS04 and concentrated. The crystallized residue is dissolved in DCM, methanol is added and the DCM is removed in vacuo. The crystallized product is filtered by sunction and washed with cold methanol. Yield 63%, m/z 226/228 [M+H]+, rt 1.16 min, LC-MS Method V001 003.

The synthetic route of 667463-64-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; GRUNDL, Marc; MORSCHHAEUSER, Gerd; OOST, Thorsten; PAUTSCH, Alexander; WO2014/140078; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 667463-64-1, These common heterocyclic compound, 667463-64-1, name is 6-Bromo-1-methylindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 2: Synthesis of Intermediate I-4.2 [0294] I-4.1 (15.0 g, 63 mmol) and hydrazine hydrate (30 mL, 618 mmol) are heated to 125 C. for 72 h. To the cool reaction mixture DCM is added and extracted with water and 1 M HCl. The organic is layer is dried over MgSO4 and concentrated. The crystallized residue is dissolved in DCM, methanol is added and the DCM is removed in vacuo. The crystallized product is filtered by sunction and washed with cold methanol. Yield 63%, m/z 226/228 [M+H]+, rt 1.16 min, LC-MS Method V001-003.

The synthetic route of 667463-64-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; GRUNDL, Marc; MORSCHHAEUSER, Gerd; OOST, Thorsten; PAUTSCH, Alexander; US2014/275114; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 102359-00-2, A common heterocyclic compound, 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, molecular formula is C9H7NO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The above material was dissolved in methanol (50 mL) and formic acid (5 miL) and hydrogenated over Pd/C (0.40 g) at elevated hydrogen pressure (50 psi) for 16 h. The reaction mixture was filtered through a plug of celite (10 g), the celite was washed with methanol (2X20 ML), the combined filtrates were evaporated to dryness, dissolved in H20 (20 mL), and re-evaporated. The resulting residue was dissolved in N, N-DIMETHYLFORMAMIDE (5 mL), and added in one portion to the previously prepared suspension of 2-oxoindoline-5-carboxylic acid (0.53 g, 3 MMOL), O-(BENZOTRIAZOL-L-YL)-N, N, N, N-TETRAMETHYLURONIUM tetrafluoroborate (1.1 g, 3.6 mmol), 1-HYDROXYBENZOTRIAZOLE (0.486 g, 3.6 mmol) and N,N-diisopropylethylamine (1.7 g, 12 mmol) in acetonitrile (10 ML) and N,N-dimethylformamide (10 mL). The mixture was stirred overnight, the solvents were removed in vacuo, and the residue was purified on a silica gel column using chloroform/methanol, (10: 1), then CHLOROFORM/METHANOL/AQUEOUS ammonia, (100: 10: 1), as the eluent. The semi-solid crude material was again subjected to silica gel chromatography using chloroform/methanol/aqueous ammonia, (150: 10: 1), as the eluent to afford 0.20 g (19% yield) the title compound as yellow foam: MS (ES) M/Z 367 (M++1).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ASTRAZENECA AB; WO2005/27823; (2005); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem