Category: indolines-derivatives

These common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 5-Nitroindoline-2,3-dione

General procedure: A mixture of an isatin (1mmol), molononitrile (1mmol), CH activatedacid (1mmol), and [C4(DABCO)2]·2OH(2mol%) inwater (3mL)was stirred at 80 C. The reaction progress was monitored by TLC [eluent:n-hexane:EtOAc (9:2)] (It is important to that by beginning of thereaction the products were precipitated in the reaction medium).After completion of the reaction, the mixture was cooled to room temperature and the solid product was filtered, washed with cold distilledwater (2 mL) to obtain essentially pure products. The solid productswere recrystallized from ethanol if necessary.

The synthetic route of 5-Nitroindoline-2,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Article; Goli-Jolodar, Omid; Shirini, Farhad; Seddighi, Mohadeseh; Journal of Molecular Liquids; vol. 224; (2016); p. 1092 – 1101;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 201940-08-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 201940-08-1, name is tert-Butyl 5-bromoisoindoline-2-carboxylate, This compound has unique chemical properties. The synthetic route is as follows.

0.69 ml of n-Butyl lithium (2.5M solution in hexane) was added dropwise to a stirred solution of 5- bromo-1,3-dihydro-isoindole-2-carboxylic acid tert-butyl ester (429 mg; 1.44 mmol) in anhydrous THF (10 ml) at -78C under an atmosphere of nitrogen. The reaction was stirred for 50 minutes then 1-methyl-4-piperidone (212 mul; 1.2 equiv.) was added and stirred at -78C for a further 60 minutes then warmed to room temperature. The reaction was quenched with saturated ammonium chloride solution then extracted with EtOAc. The EtOAc layer was washed with saturated NaHCO3, brine, dried (MgSO4) and evaporated. Purification by flash column chromatography on SiO2, gradient elution from 0% to 10% 2M methanolic ammonia / DCM gave 111 mg of 5-(4-hydroxy-1-methyl- piperidin-4-yl)-1 ,3-dihydro-isoindole-2-carboxylic acid tert-butyl ester as a colourless oil.

The chemical industry reduces the impact on the environment during synthesis tert-Butyl 5-bromoisoindoline-2-carboxylate. I believe this compound will play a more active role in future production and life.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; WO2008/44045; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 20870-90-0, name is 5-Bromo-1-methyl-2-oxoindoline, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 20870-90-0

To a solution of 5-bromo-1-methyl-1 ,3-diotahydro-indol-2-one (CASNo. 20870-90-0, 4.07 g, 18.00 mmol). in DMSO (50 mL) was added biotas(pinaco.ato)diboron (5 03 g, 19.80 mmol), and potassium acetate (5.30 g, 54 0 mmol) Next, [1 , 1 ‘-biotas(diphenylphosphiotano)- ferrocene]-d(chloropalladiotaum(ll) complexed with dichloromethane (CASNo. 72287-26-4, 0 417 g, 0 540 mmol) was added The reaction mixture was degassed by bubbling nitrogen through the solution for 3 minutes The reaction was then heated at 80 C for 18 hr The reaction was then poured into ice-water and extracted three times with diethyl ether, The organic extracts were combined, washed with brine, dned over anhydrous sodium sulfate, filtered and concentrated The resulting residue was purified by silica gel flash chromatography (ethyl acetate-heptane, O to 70%) to afford 1-methyl-5-(4,4,5,5- tetramethyl-(1 ,3,2Jdioxaboro.an-2-yl)-1 ,3-diotahydro-indol-2-one, 1H NMR (400 MHz1 CDCI3) delta ppm 1 35 (s, 12 H), 3.23 (s, 3 H), 3.51 (s, 2 H), 6 83 (d, J=7,6 Hz, 1 H), 7.69 (S1 1 H)1 7,77 (d, J= 7 8 Hz, 1 H),

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 20870-90-0.

Reference:
Patent; NOVARTIS AG; ADAMS, Christopher Michael; CHAMOIN, Sylvie; HU, Qi-Ying; ZHANG, Chun; WO2010/130794; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3416-57-7, name is 2-(2-Oxopropyl)isoindoline-1,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Formula: C11H9NO3

5.5. Examples 5-13; Similar to Examples 3 and 4,5-methyl-7H-pyrrolo[2,3-d]pyrimidin-4-ol was prepared using the following solvent/base combinations for the preparation of the 2-amino-4-methyl-1H-pyrrole-3-carboxamide intermediate:

According to the analysis of related databases, 3416-57-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Bednarz, Mark S.; Kanamarlapudi, Ramanaiah C.; Wu, Wenxue; US2008/97098; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 172078-33-0, These common heterocyclic compound, 172078-33-0, name is Indolin-5-ol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Compound 1E (100 mg, 423 mmol), compound 24A (63 mg, 465 mmol) and cesium carbonate (303 mg, 930mmol) were added to NMP (1 mL). The reaction solution was heated to 120 C and stirred for 2 hours, and then thereaction was quenched with water, and extracted with ethyl acetate (3 x 10 ml). The organic layer was washed withsaturated NaCl solution, dried over anhydrous sodium sulfate, filtered and evaporated to dryness. The residue waschromatographed on a silica gel plate (dichloromethane/methanol = 10: 1, Rf = 0.2) and purified to give compound 24B(yellow solid, 80 mg, 57%).LCMS (ESI) m/z: 336.1(M+1)+

Statistics shows that Indolin-5-ol is playing an increasingly important role. we look forward to future research findings about 172078-33-0.

Reference:
Patent; GUANGDONG ZHONGSHENG PHARMACEUTICAL CO., LTD; LONG, Chaofeng; CHEN, Zhengxia; CHEN, Xiaoxin; ZHANG, Yang; LIU, Zhuowei; LI, Peng; CHEN, Shuhui; LIANG, Guibai; XIE, Cheng; LI, Zhengwei; FU, Zhifei; HU, Guoping; LI, Jian; (276 pag.)EP3293177; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 6341-92-0 as follows. Recommanded Product: 6-Chloroisatin

General procedure: In a 25 mL round bottom flask, isatins 1 (1 mmol), 3-phenylisoxazol-5(4H)-one 2 (1 mmol) or 3-ethylisoxazol-5(4H)-one 7 (1 mmol), pyrazol-5-amine 3 (1 mmol) or 6-aminopyrimidine-2,4-(1H,3H)-dione 5 (1 mmol), and Amberlyst-15 (100 mg) were stirred in CH3OH (5.0 mL) at 80 C. When the reaction was completed (detected by TLC), the spherical catalyst was separated by a sieve at once under hot condition. Then, the reaction mixture was cooled to room temperature, and solid precipitation occurred. After filtration, the crude product was recrystallized from EtOH and DMF to give pure compound.

According to the analysis of related databases, 6341-92-0, the application of this compound in the production field has become more and more popular.

Reference:
Article; Niu, Qingqing; Xi, Junhua; Li, Lei; Li, Li; Pan, Chengli; Lan, Meijun; Rong, Liangce; Tetrahedron Letters; vol. 60; 43; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 2-(Bromomethyl)isoindoline-1,3-dione

To a suspension of NaH (2.2 g, 54 mmole) in THF (200 ml_) was added diethyl 2-(phenylmethyl)butanedioate (12.5 g, 49.9 mmole). After 30 min at RT, bromomethyl phthalimide was added to the reaction mixture and the contents were stirred for 14 h at RT. The reaction was quenched with H2O (15 mL), diluted with Et2O (300 mL) and layers separated. The organic layer was concentrated under vacuum and the resulting residue recrystallized from EtOH (0) to give the title compound (13 g, 64%) as a white solid: LCMS (ES) m/z 410 (M+H)+.

The synthetic route of 2-(Bromomethyl)isoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/76423; (2007); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 6326-79-0, name is 6-Bromoisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6326-79-0, SDS of cas: 6326-79-0

General procedure: TiCl4 (0.7 mL, 6 mmol)was added to a stirred suspension of Zn powder (0.78 g, 12 mmol) in freshlydistilled anhydrous THF (15 mL) at room temperature (rt) under a dry N2atmosphere. After completion of the addition, the mixture was refluxed for 2 h.The suspension of the low-valent titanium reagent thus-formed was cooled tort. A solution of isatin or its derivatives 1 or 3 (2 mmol) in THF (10 mL) wasadded dropwise. The mixture was stirred at room temperature for about 5 minunder N2. After this period, the thin layer chromatography (TLC) analysis of themixture showed the reaction completed. The reaction mixture was quenchedwith 3% HCl (15 mL) and extracted with CHCl3 (3 50 mL). The combinedextracts were washed with water (3 50 mL) and dried over anhydrousNa2SO4. After evaporation of the solvent under reduced pressure, the crudeproduct was purified by column chromatography (petroleum ether/ethylacetate = 5:1) to give the pure products 2 or 4.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Bromoisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Lin, Wei; Hu, Ming-Hua; Feng, Xian; Fu, Lei; Cao, Cheng-Pao; Huang, Zhi-Bin; Shi, Da-Qing; Tetrahedron Letters; vol. 55; 14; (2014); p. 2238 – 2242;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 20870-90-0, A common heterocyclic compound, 20870-90-0, name is 5-Bromo-1-methyl-2-oxoindoline, molecular formula is C9H8BrNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of oxindole 1 (0.30 mmol), allenoate 2 (0.75 mmol), PPh3 (0.045 mmol) in xylene (2.0 mL, dried over 4 A MS) was stirred at 50 C under Ar atmosphere for 24 h. After completion of the reaction (indicated by TLC), the mixture was quenched with saturated NaCl solution and diluted with EtOAc, followed by washing with H2O and saturated NaCl solution, and finally dried over Na2SO4. The crude product was purified by flash column chromatography to provide the corresponding product 3.

The synthetic route of 20870-90-0 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhang, Ji-Quan; Li, Shu-Min; Wu, Chun-Feng; Wang, Xing-Lan; Wu, Ting-Ting; Du, Yao; Yang, Yuan-Yong; Fan, Ling-Ling; Dong, Yong-Xi; Wang, Jian-Ta; Tang, Lei; Catalysis Communications; vol. 138; (2020);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 14192-26-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 14192-26-8, name is Methyl 2-oxoindoline-6-carboxylate belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a yellow solution of methyl 2-oxoindoline-6-carboxylate (6.24 g, 31.7 mmol, Eq: 1) and methyl iodide (9.08 g, 4 ml, 64 mmol, Eq: 2.02) in dry dimethylformamide (90.5 ml) was added portionwise a suspension of NaH in mineral oil (60% w/w, 2.54 g, 63.4 mmol, Eq: 2) over 1.5h while controlling the exothermicity with a water bath. The reaction mixture was carefully poured on an icecooled mixture of -1 1 g sodium hydrogenocarbonate, water (150 mL) and ethyl acetate(150 mL). The resulting mixture was extracted with ethyl acetate and the organic layers were washed with brine. The combined organic layers were dried with sodium sulfate, filtered and concentrated in vacuo.The residue was triturated with heptane ethyl acetate 1:1 and the precipitate was filtered and washed with heptane ethyl acetate 1:1. The solid was dried in vacuo to afford the desired product as a light brown solid (5.026 g, 72%).MS (mlz) = 218.1 [M + H].

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-oxoindoline-6-carboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HILPERT, Hans; KOLCZEWSKI, Sabine; HUMM, Roland; STOLL, Theodor; MUSER, Thorsten; PLANCHER, Jean-Marc; GAUFRETEAU, Delphine; (142 pag.)WO2015/197567; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem