Category: indolines-derivatives

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 3484-35-3 as follows. Recommanded Product: 5-Methylindolin-2-one

General procedure: To a solution of appropriate oxindole (7a-e, 0.3 mmol) in ethanol (3 mL) was added corresponding aldehydes (11a-e,0.32 mmol) and a catalytic amount of piperidine. The reaction mixture was stirred at reflux for 6-12 h (reaction monitored byTLC). After cooling, the precipitate was filtered, washed with cold ethanol, and dried in air to furnish pure (Z)-3-(3′-methoxy-4′-(2-amino-2-oxoethoxy)-benzylidene)indolin-2-ones title compounds of formula (4a-v) as yellow/brown/orange solids in moderate to excellent yields.

According to the analysis of related databases, 3484-35-3, the application of this compound in the production field has become more and more popular.

Reference:
Article; Senwar, Kishna Ram; Reddy, T. Srinivasa; Thummuri, Dinesh; Sharma, Pankaj; Naidu; Srinivasulu, Gannoju; Shankaraiah, Nagula; European Journal of Medicinal Chemistry; vol. 118; (2016); p. 34 – 46;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 118289-55-7, SDS of cas: 118289-55-7

Preparation of 5-(2-(4-(l ,2-benzisothiazol-3-vD-1 -piperazinvl)ethyl)-6-chloro-1,3-dihvdro-2H-indol-2-one(Ziprasidone)In a 50 ml 3 necked round bottom flask there were placed 1 gram (4.56 mmol) of 3-piperazinylbenzo[d]isothiazole; 2.5 grams (10.86 mmol) of 6-chloro-5-(2-chloroethyl)indolin-2-one; 50 mg of potassium iodide; 1.64 grams (11.88 mmol) of potassium carbonate. The contents of the flask were heated to 90 C. The reaction was monitored by HPLC. After completion of the reaction, 50 ml of DM water was added to the reaction mixture and stirred. The product was filtered off and washed with water and dried to obtain 1.41 grams (75%) of 5-(2-(4-(l,2-benzisothiazol-3-yl)-l-piperazinyl)ethyl)-6-chloro-l,3-dihydro-2H-indol-2-one. The crude product was purified by IPA and/ or THF. The product matched the spectra of a standard NMR and showed the correct retention time by HPLC with 98.0% assay. The melting point of the compound was found to be 218 C-220 C, and was found to conform with the melting point of 218 C -220 C as disclosed in US. 5,206,366.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Chloro-5-(2-chloroethyl)indolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; LUPIN LIMITED; WO2006/11157; (2006); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 18711-13-2, name is 4,7-Dichloroindoline-2,3-dione, A new synthetic method of this compound is introduced below., Quality Control of 4,7-Dichloroindoline-2,3-dione

with the operation of Example 1, the isatin (147mg, lmmol) to 4,7_ dichloro isatin (216mg, lmmol), reflux for 4h, the obtained orange-red solid product (IV-3) 2 – (3-amino-4, 7-dichloro-2-oxo-indol-3-yl) -3-hydroxy-1,4-naphthoquinone (300mg, 77%),

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Zhejiang University of Technology; Song, Qingbao; Che, Fengfeng; Zhang, Peng; Shen, Tian Hua; (10 pag.)CN104030966; (2016); B;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 6326-79-0, name is 6-Bromoisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6326-79-0, Computed Properties of C8H4BrNO2

A mixture of 6-bromoisatin (226 mg, 1 mmol), malonic acid, (114 mg, 1.1 mmols) and sodium acetate (103 mg, 1.25 mmols) and acetic acid (2.5 ml) the was stirred under a nitrogen atmosphere for 5 h. Additional sodium acetate (100 mg) was added and the resultant mixture was heated overnight. The reaction mixture was cooled to room temperature, excess acetic acid was removed under reduced pressure and the resultant pinkish brown solid was washed with copious amounts of water and dried under vacuum to obtain the desired product (234 mg, 88%). ‘H NMR (300 MHZ, DMSO-d6): 6. 88 (s, 1H), 7.44 (d, 1H), 7.58 (s, 1H), 8.18 (d, 1H), 12.11 (br s, 1H), INLZ 268

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ASTRAZENECA AB; WO2004/81008; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 118289-55-7 as follows. Recommanded Product: 118289-55-7

88.7 g (0.837 mols, 3.21 molar equivalents) of sodium carbonate, 600 mL of acetonitrile and 66.7 g (0.261 mols, 1.0 molar equivalent) of 3- (1-piperazinyl) -1, 2- benzisothiazole hydrochloride are added into a beaker equipped with a magnetic stirrer. The resulting white suspension is stirred for 10 minutes. At this point 60.0 g (0.261 mols, 1.0 molar equivalent) of 5- (2- chloroethyl) -6-chloro-l, 3-dihydro-indole-2- (2H) -one and 0.3 g (0.002 mols, 0.008 molar equivalents) of NaI are added. The resulting brown suspension is charged into a 1 L reactor vessel, which is purged with nitrogen and heated to 120-125 C (internal pressure increases to 400- 500 kPa) for 25 hours. The reaction is cooled to room temperature, stirred for 30 minutes, filtered and the solid washed with acetonitrile. A wet mixture of zipradisone and inorganic salts is obtained, that is further washed with acetonitrile. The resulting wet mixture of ziprasidone and inorganic salts is stirred with 675 ml of water at reflux temperature for 1 h to remove inorganic salts. The suspension is cooled to room temperature, stirred for 30 minutes and filtered. The solid is washed with water, and 140 g of wet solid (corresponding to 87 g of dry material) are obtained. EPO The wet solid is stirred again with water at reflux temperature for 1 h to remove residual inorganic salts. The suspension is cooled to room temperature, stirred for 30 minutes and filtered. The solid is washed with water, and 170 g of wet solid (corresponding to 81 g of dry- material) are obtained. HPLC analysis reveals a purity of 97.8%.To remove starting materials present in the wet solid obtained in the previous step, it is stirred twice with400 ml of tetrahydrofuran at reflux temperature. The solution is cooled to room temperature, stirred for 30 minutes and filtered. The solid is washed twice with 40 ml of tetrahydrofuran, and 60 g of wet solid, corresponding to 54.8 g of dry material, are obtained.The solid obtained is ziprasidone base having a purity of 99.4% by HPLC and the global yield from the starting compounds is 51% (molar yield) . Potentiometric titration with HClO4: 100.03%

According to the analysis of related databases, 118289-55-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MEDICHEM, S.A.; WO2006/34965; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 1074-82-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1074-82-4 as follows.

To a solution of 1 -bromo-4-bromomethyl-benzene (3.0 g, 12.0 mmol, 1.0 eq) in DMF (40 mL) was added phthalimide potassium (4.4 g, 24.0 mmol, 2.0 eq). The reaction mixture was stirred for 1 h at rt Water was added, and the mixture was extracted with EtOAc. The organic layer was dried over Na2S04 and evaporated to give 2-(4-bromo-benzyl)-isoindole-l,3-dione which was used as a white solid (4.0 g, quant)without further purification.

According to the analysis of related databases, 1074-82-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; LIFESCI PHARMACEUTICALS, INC.; MCDONALD, Andrew; WO2015/103317; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 893620-44-5, name is 6-Bromo-5-fluoroindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 893620-44-5, COA of Formula: C8H5BrFNO

d) 6-Bromo-5-fluoro-1 ,3-trimethylindolin-2-one To a suspension of NaH (5.04 g, 126 mmol) in tetrahydrofuran (105 ml) under an argon atmosphere was added 6-bromo-5-fluoroindolin-2-one (7.24 g, 31.5 mmol) in portions. After gas evolution has ceased methyl iodide (17.9 g, 7.88 ml, 126 mmol) was added dropwise within 50 minutes by means of a syringe pump (exothermic reaction), keeping the temperature of the reaction mixture between 24C and 26C. The reaction mixture was kept at room temperature for 4 hours and then carefully quenched with aqueous ammonium chloride solution. The reaction mixture was diluted with tert-butyl methyl ether, water and saturated aqueous ammonium chloride solution. The aqueous phase was extracted with tert-butyl methyl ether, the combined organic phases were washed with saturated aqueous ammonium chloride and dried over sodium sulfate. The solvent was evaporated and the residue was triturated with heptane to give the title compound as light brown solid (7.87 g). 1H NMR (CDC13, 400 MHz): (ppm) = 7.02-6.97 (m, 2H), 3.19 (s, 3H), 1.36 (s, 6H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 6-Bromo-5-fluoroindolin-2-one, and friends who are interested can also refer to it.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BRUNNER, Daniela; MALBERG, Jessica; SHANKAR, Bavani G.; KOLCZEWSKI, Sabine; LIMBERG, Anja; PRINSSEN, Eric; RIEMER, Claus; STOLL, Theodor; WO2014/40969; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 3485-84-5, name is N-Vinylphthalimide, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3485-84-5, Safety of N-Vinylphthalimide

A thick walled glass tube, equipped with a stir bar, was charged with palladium (II) acetate (64 mg, 0.29 mmol), acetonitrile (50 mL), JV-vinylphthalimide (1.19 g, 6.89 mmol), triethylamine (2.4 mL, 17 mmol), tri-o-tolylphosphine (260 mg, 0.86 mmol) and l-(7-bromo-2-ethyl-17f-imidazo[4,5-c]quinolin-l-yl)-2-methylpropan-2-ol (2.00 g, 5.74 mmol). The reaction mixture was purged with nitrogen and the tube was sealed and heated at 120 0C in an oil bath for 16 hours. The reaction was cooled to ambient temperature and silica gel (20 g) was added followed by concentration under reduced pressure. The sample absorbed on silica was purified by chromatography using a HORIZON HPFC system (silica cartridge, eluting with a 0-7% gradient of methanol in dichloromethane). The recovered solid was washed with 1% aqueous sodium carbonate to provide 1.95 g of 2-{2- EPO [2-ethyl- 1 -(2-hydroxy-2-methylpropyl)- 1 H-imidazo[4,5 -c]quinolin-7-yl]ethenyl} – 1 H- isoindole-l,3(2H)-dione as a bright yellow solid. MS (APCI) m/z 441 (M + H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, N-Vinylphthalimide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; 3M INNOVATIVE PROPERTIES COMPANY; WO2006/91394; (2006); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 7147-90-2, The chemical industry reduces the impact on the environment during synthesis 7147-90-2, name is 5-Chloroisoindoline-1,3-dione, I believe this compound will play a more active role in future production and life.

To a solution of 5-chloro-isoindole-l,3-dione (5.0 g, 27.5 mmol) in DCM (200 mL) was added ethylmagnesium chloride (2 M in THF, 41.3 mL) dropwise at 0 C. After the addition, the mixture was allowed to stir at 0 C for 3 hours before it was quenched with satd. aq. NH4C1 solution. After extraction with DCM, the organic layer was washed with brine, dried over anhy. Na2S04, filtered and concentrated in vacuo to give a crude product containing a mixture of two regioisomers (5.82 g, 100%). MS: 212.0 (M+H+).; Under N2 protection, triethylsilane (19.3 g, 166 mmol) and TFA (20 mL) were added successively to a mixture of 5-chloro-3-ethyl-3-hydroxy-2,3-dihydro-isoindol- 1 -one and 6- chloro-3-ethyl-3-hydroxy-2,3-dihydro-isoindol-l-one (3.52 g, 16.6 mmol). After stirring at room temperature for 2 hours, the reaction mixture was concentrated under reduced pressure. The residue was treated with a satd. aq. solution of NaHCC>3 (30 mL) and extracted with DCM (2 x 30 mL). The combined organic layers were washed with brine, dried over anhy. Na2S04, filtered and concentrated in vacuo to give a crude mixture of products. Both 5-chloro-3-ethyl-2,3-dihydro-isoindol-l-one (0.65 g, 20%) MS: 196.1 – 147 -(M+H+) and 6-chloro-3-ethyl-2,3-dihydro-isoindol-l-one (0.62 g, 19%) MS: 196.1 (M+H+) were obtained by prep-HPLC separation as white solids.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Chloroisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; AEBI, Johannes; AMREIN, Kurt; CHEN, Wenming; HORNSPERGER, Benoit; KUHN, Bernd; LIU, Yongfu; MAERKI, Hans P.; MAYWEG, Alexander V.; MOHR, Peter; TAN, Xuefei; WANG, Zhanguo; ZHOU, Mingwei; WO2013/79452; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 20870-90-0, A common heterocyclic compound, 20870-90-0, name is 5-Bromo-1-methyl-2-oxoindoline, molecular formula is C9H8BrNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a Schlenk tube were added oxindole 1 (0.3 mmol), t-BuONO (0.6 mmol), andTHF (2 mL). Then the tube was stirred at 50 C under 1 atm of O2 for the indicatedtime until complete consumption of starting material monitored by TLC analysis.After the reaction was finished, the reaction mixture was washed with brine. The aqueous phase was re-extracted with ethyl acetate. The combined organic extractswere dried over Na2SO4, removal of the solvent under vacuum afforded the crudeproduct, which was purified further by column chromatography using hexane-ethylacetate.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Wei, Wen-Ting; Ying, Wei-Wei; Zhu, Wen-Ming; Wu, Yi; Huang, Yi-Ling; Cao, Yi-Qi; Wang, Yi-Ning; Liang, Hongze; Synlett; vol. 28; 17; (2017); p. 2307 – 2310;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem