Category: indolines-derivatives

Application of 5394-18-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5394-18-3, name is 2-(4-Bromobutyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Example 26; Compound of Formula VII, Wherein R1 and R2 Taken Together with the Carbon Atom to which they are Attached are CCH2, and R20=(4-Pyridin-3-yl-1H-triazol-1-ylbutyl), Rx=Ac; Step 26a.; To a solution of commercially available 2-(4-bromo-butyl)-isoindole-1,3-dione (7.1 mmol) in DMF (7 ml) was added sodium azide (5 eq.). After stirring at room temperature overnight, the mixture was diluted with water and extracted with EtOAc. The combined organic extracts were washed 3 times with water, once with brine, dried over MgSO4, filtered and concentrated under vacuum to give the desired azide product in quantitative yield. 13C NMR (CDCl3, ppm) delta: 168.4, 134.0, 132.1, 123.3, 50.9, 37.3, 26.3, 26.3, 25.9.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(4-Bromobutyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Or, Yat Sun; Tang, Datong; Gai, Yonghua; Sun, Ying; Xu, Guoyou; Wang, Zhe; US2006/122128; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 32692-19-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 32692-19-6, name is 5-Nitroindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

4.92 g (30 mmol) of 5-nitroindoline is introduced by portions into a 250 ml double-necked flask, under argon atmosphere, containing a suspension of 2.4 g (60 mmol) of NaH (60%) in 60 ml DMF,. The vigorous hydrogen evolution is accompanied by the formation of a red suspension. Agitation is maintained for 30 minutes at 23 C. before the addition, by portions, of 4.74 g (30 mmol) of 3-dimethylaminopropyl chloride hydrochloride. The reaction mixture is agitated and heated at 60 C. during 18 hours. The whole is finally poured into 200 ml of a water/ice mixture. The product is then extracted twice with 100 ml of AcOEt. The organic solution is washed successively with 100 ml of water and 100 ml of brine. After drying over MgSO4 and concentration under vacuum, the evaporation residue is purified by flash chromatography an a silica column (eluent: AcOEt/MeOH 100/0 to 0/100). A dark yellow oil is obtained with a yield of 48%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Nitroindoline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Societe de Conseils de Recherches et d’Applications Scientifiques (S.C.R.A.S.); US6653312; (2003); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 40314-06-5, The chemical industry reduces the impact on the environment during synthesis 40314-06-5, name is 5-Methylisoindoline-1,3-dione, I believe this compound will play a more active role in future production and life.

Isolation and analytic data for 13, observed in the crossover study, was obtained by independent preparation using the following procedure. Isovaleryl chloride (65 muL, 0.53 mmol) was added to a mixture of 4-methylphthalimide (200 mg, 1.2 mmol), isobutyraldehyde (108 muL, 1.19 mmol), NaI (170 mg, 1.1 mmol), 4 A MS (100 mg), triethylamine (150 muL, 1.1 mmol), ethyl acetate (1.1 mL), and acetonitrile (1.1 mL) at room temperature and with stirring. After 24 h, the mixture was diluted in EtOAc and washed with 1 M NaOH (3×) and brine. The organic phase was dried (MgSO4) and concentrated. Purification by flash chromatography (SiO2, hexanes:EtOAc 4:1) gave 13 (105 mg, 0.33 mmol, 62%) as a white solid. 1H NMR (300 MHz, CDCl3): delta 7.76 (d, J=7.6Hz, 1H), 7.68 (s, 1H), 7.55 (d, J=7.6Hz, 1H), 6.19 (d, J=10.4Hz, 1H), 2.90 (nfom, 1H), 2.52 (s, 3H), 2.23 (d, J=7.3Hz, 2H), 2.09 (septet, J=6.7Hz, 1H), 1.08 (d, J=6.6Hz, 3H), 0.91 (d, J=6.6Hz, 3H), 0.90 (d, J=7Hz, 3H), and 0.88 (d, J=7.6Hz, 3H). 13C NMR (75 MHz, CDCl3): delta 171.9, 167.1, 166.9, 145.8, 135.0, 131.8, 128.9, 124.2, 123.6, 79.1, 43.1, 29.5, 25.6, 22.3, 22.1, 19.0, and 17.9. IR (neat): 2963, 2875, 1779, 1748, 1721, 1618, 1468, 1430, 1363, 1101, and 1006 cm-1. HRMS (ESI-TOF): Calcd for C18H23NNaO4+ [M+Na+] requires 340.1519; found 340.1522. Mp: 53-55 C.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methylisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Enright, Robert N.; Grinde, Jeffrey L.; Wurtz, Lincoln I.; Paeth, Matthew S.; Wittman, Tekoa R.; Cliff, Emily R.; Sankari, Yessra T.; Henningsen, Lucas T.; Tan, Chuchen; Scanlon, Joseph D.; Willoughby, Patrick H.; Tetrahedron; vol. 72; 41; (2016); p. 6397 – 6408;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 5332-26-3 as follows. Application In Synthesis of 2-(Bromomethyl)isoindoline-1,3-dione

To a solution of benzyl 2-phenylacetate (1 1.3 g, 50 mmol) in dry THF (100 mL) at -78 C under nitrogen was added LiHMDS (2.5 M in THF, 40 mL, 100 mmol) dropwise over 25 min. A solution of 2-(bromomethyl)isoindoline-1,3-dione (14.4 g, 60 mmol) in THF (100 mL) was then added dropwise and the mixture was stirred at -78 C for 2 h, then allowed to warm to r.t. and stirred overnight. The mixture was diluted with water (100 mL) and extracted with EtOAc (100 mL x 3). The combined organic extracts were dried over sodium sulfate, filtered and concentrated. The residue was purified by column chromatography (DCM/MeOH = 100:0- 100:1) to give the desired product (12.5 g, 65% yield) as a white solid. LCMS (ES-API): Rt 2.78 min; m/z 386.1 [M+H]+.

According to the analysis of related databases, 5332-26-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CTXT PTY LIMITED; MORROW, Benjamin Joseph; FOITZIK, Richard Charles; CAMERINO, Michelle Ang; LAGIAKOS, Helen Rachel; WALKER, Scott Raymond; BOZIKIS, Ylva Elisabet Bergman; STEVENSON, Graeme Irvine; CUZZUPE, Anthony Nicholas; STUPPLE, Paul Anthony; (313 pag.)WO2019/43139; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 3339-73-9, A common heterocyclic compound, 3339-73-9, name is 3-(1,3-Dioxoisoindolin-2-yl)propanoic acid, molecular formula is C11H9NO4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 3-(1,3-dioxoisoindolin-2-yl)propanoic acid (256 mg, 1.17 mmol) in CH2Cl2 (5.9mL) were added (COCl)2 (200 L, 2.33 mmol) and DMF (1 drop) at 0 C.The reaction mixture was stirred at 0 C for 30 min and at room temperature for 3 h. Thesolvents were removed under reduced pressure. Azeotropic distillations were carried out withtoluene (2 × 3 mL) under reduced pressure. The residue (acid chloride) was used for next stepwithout further purification

The synthetic route of 3339-73-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Natori, Yoshihiro; Hwang, Candy S.; Lin, Lucy; Smith, Lauren C.; Zhou, Bin; Janda, Kim D.; Beilstein Journal of Organic Chemistry; vol. 15; (2019); p. 1020 – 1031;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 41910-64-9, name is 4-Chloroindoline, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 41910-64-9, Safety of 4-Chloroindoline

1 , 1 -dime th yleth yl 4-chloro-2, 3-dih ydro- 1 H-indole- 1 -carboxylateA solution of 4-chloro-2,3-dihydro-1 H-indole (4.0 g, 26.0 mmol), Boc20 (6.05 mL, 26.0 mmol), DIEA (9.10 mL, 52.1 mmol), DMAP (0.318 g, 2.60 mmol) was stirred at room temperature overnight. LCMS indicated complete conversion. The reaction mixture was poured into 0.1 N HCI (10 mL) and extracted with ethyl acetate (3 x 20 mL). The combined organics were dried over sodium sulfate, filtered and concentrated to afford 1 ,1 – dimethylethyl 4-chloro-2,3-dihydro-1 H-indole-1 -carboxylate (6.36 g) as a yellow oily semisolid. LC-MS(ES) m/z = 198 [M+H-t-Bu]+. 1H NMR (400 MHz, DMSO-d6) delta ppm 1 .51 (s, 9 H), 3.07 (t, J=8.72 Hz, 2 H), 3.95 (t, J=8.72 Hz, 2 H), 6.98 (d, J=8.84 Hz, 1 H), 7.19 (t, J=8.08 Hz, 1 H), 7.48 – 7.70 (m, 1 H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Chloroindoline, and friends who are interested can also refer to it.

Reference:
Patent; GLAXOSMITHKLINE LLC; AXTEN, Jeffrey, Michael; GRANT, Seth, Wilson; HEERDING, Dirk, A.; MEDINA, Jesus, Raul; ROMERIL, Stuart, Paul; TANG, Jun; WO2011/119663; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 7147-90-2, name is 5-Chloroisoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7147-90-2, Quality Control of 5-Chloroisoindoline-1,3-dione

4- Chlorophthalimide (273 mg) is dissolved in a minimum of boiling ethanol (ca. 2.5 ml). 37% formaldehyde solution (0.15 ml) is added to the still hot solution followed by /V-(4-chlorophenyl)glycine (279 mg). Reflux is continued for 3 h. The yellow solution is kept in the refrigerator overnight. The yellow precipitate is collected by suction filtration, washed with ethanol, and dried in vacuo. The crude is recrystallised from ethanol to provide /V-[(5-chloro-l,3-dioxo-2-isondolinyl)methyl]- /V-(4-chlorophenyl)glycine (135 mg) as light yellow crystals. 1H-NMR (500 MHz, DMSOcI6): delta (ppm) = 4.26 (s, 2H), 5.24 (s, 2H), 6.97 (d, J = 9.1 Hz, 2H), 7.22 (d, J = 9.1 Hz, 2H), 7.90 (d, J = 1.2 Hz, 2H), 7.97 (t, J = 1.2 Hz, IH), 12.71 (br s, IH).13C-NMR and DEPT (125 MHz, DMSOd6) : delta (ppm) = 51.77 (CH2), 54.72 (CH2), 114.39 (2 CH), 121.70 (C), 123.35 (CH), 124.99 (CH), 128.39 (2 CH), 129.97 (C), 133.41 (C), 134.38 (CH), 139.41 (C), 145.34 (C), 167.01 (CO), 167.35 (CO), 171.48 (CO). MS ( + ESI): m/z = 379 (M + H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Chloroisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; UNIVERSITAET DES SAARLANDES; ENGEL, Matthias; FROeHNER, Wolfgang; STROBA, Adriane; BIONDI, Ricardo M.; WO2010/43711; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 172078-33-0,Some common heterocyclic compound, 172078-33-0, name is Indolin-5-ol, molecular formula is C8H9NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of 6-(3,5-dimethylisoxazol-4-yl)-7-methoxy-2-oxo-l-(pyri- din-2-ylmethyl)-l,2-dihydroquinoline-3-carbaldehyde (intermediate- le) (0.2 g, 0.51 mmol) in titanium isopropoxide (5 mL) was added indolin-5-ol (0.1 g, 0.77 mmol) followed by stirring at RT for 16 h. After stirring, methanol (20 mL) was added to the mixture at 0 C followed by NaCNBH4 (0.16 g, 2.56 mmol). The mixture was stirred at RT for 2 h. The mixture was then quenched with ammonium hydroxide and the solids were filtered off. The filtrate was extracted with EtOAc (100 mL x 2), washed with water (100 mL) and brine (100 mL), dried over sodium sulphate and concentrated under reduced pressure. The residue was purified to get the title compound as pale brown solid (0.016 g, 6 %). 1H NMR (400 MHz, CDC13) delta 8.60 (d, J=4.8 Hz, 1H), 7.86 (s, 1H), 7.67 (t, J=7.8 Hz, 1H), 7.34 (d, J=7.8 Hz, 1H), 7.27 (s, 1H), 7.23-7.20 (m, 2H), 6.69 (s, 1H), 6.60-6.48 (m, 2H), 5.74 (s, 2H), 4.29 (s, 2H), 3.79 (s, 3H), 3.61-3.59 (m, 2H), 3.10-3.00 (m, 2H), 2.25 (s, 3H), 2.11 (s, 3H); LC-MS: m/z 509.3 (M+H)+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Indolin-5-ol, its application will become more common.

Reference:
Patent; ORION CORPORATION; SAMAJDAR, Susanta; ABBINENI, Chandrasekhar; LINNANEN, Tero; WOHLFAHRT, Gerd; (120 pag.)WO2017/1733; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1074-82-4, name is Potassium 1,3-dioxoisoindolin-2-ide, A new synthetic method of this compound is introduced below., category: indolines-derivatives

General procedure: A mixture of dibromoalkane (23 mmol) and potassium carbonate (12 mmol)was added in acetone (30 mL), and potassium phthalimide (10 mmol) was added slowly over a 15-min period, and then the reaction was heated under reflux for 8-10 h. The reaction mixture was filtered,and the acetone was evaporated in vacuo. The crude product was purified by column chromatography on silica gel using mixtures of petroleum/acetone as eluent) to obtain the white solid compounds 2-4.

The synthetic route of 1074-82-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Pan, Wanli; Hu, Ke; Bai, Ping; Yu, Lintao; Ma, Qinge; Li, Tao; Zhang, Xu; Chen, Changzhong; Peng, Kelin; Liu, Wenmin; Sang, Zhipei; Bioorganic and Medicinal Chemistry Letters; vol. 26; 10; (2016); p. 2539 – 2543;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 60434-13-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 60434-13-1, name is 5-Chloro-1-methylindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: General procedure forthe preparation of oxazolo[5,4-b]quinoline- fused spirooxindoles 4a-t: A reaction of isatin(1 mmol),beta-diketone (1 mmol) and5-amino-3-methylisoxazole (1 mmol) were mixed and irradiated in a closed vesselin the absence of any solvent in a Synthos 3000 microwave reactor at 700 W, 14 bar,and 110 C for 10 min. The reaction was monitored by TLC. Then, thereaction mixture was filtered hot and the resulting solid products were washed with ethanol, dried in air and recrystallized from ethanol.

The chemical industry reduces the impact on the environment during synthesis 5-Chloro-1-methylindoline-2,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Article; Yuvaraj, Panneerselvam; Manivannan, Karthikeyan; Reddy, Boreddy S.R.; Tetrahedron Letters; vol. 56; 1; (2015); p. 78 – 81;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem