Category: indolines-derivatives

Electric Literature of 3783-77-5, These common heterocyclic compound, 3783-77-5, name is 2-(3-Oxobutyl)isoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2. 1-Bromo-4-N-phthalimido-2-butanone 4-N-phthalimido-2-butanone (70.0 g, 0.322 mol) was dissolved in methylene chloride (525 ml) and methanol (425 ml). A solution of bromine (16.5 ml, 0.322 mol) in methanol (100 ml) was added dropwise over a 2 hour period. The reaction mixture was allowed to stir overnight, and was then treated with additional bromine (4 ml, 0.078 mol); after 1 hour, no starting material was visible by TLC. The reaction mixture was concentrated in vacuo to leave a yellow solid, which was triturated with ether and dried under nitrogen to give the product as a white solid, m.p. 88-90 C. (54.84 g, 0.185 mol, 58% yield). 1 NMR (CDCl3): 7.82 (m, 2H), 7.72 (m, 2H), 4.01 (t, J=8 Hz, 2H), 3.93 (s, 2H), 3.12 (t, J=8 Hz, 2H).

Statistics shows that 2-(3-Oxobutyl)isoindoline-1,3-dione is playing an increasingly important role. we look forward to future research findings about 3783-77-5.

Reference:
Patent; Pfizer Inc.; US5037834; (1991); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 16800-68-3, name is 1-Acetylindolin-3-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16800-68-3, COA of Formula: C10H9NO2

3 – (4 – Fluorophenyl) propyne acid 4 – nitrophenyl-unitz (85.5 mg 0.3 mmol), was obtained. N- Acetylindole -3 -unitz 26.3 mg (0.15 mmol), the carbene-unitz (0.015 mmol), 3.96 mg, 1 diazabicycloundecene 8 – (-7 -) and methylene-methylene chloride shown in Formula 45 mul IV 0.3 mmol were placed in 3 ml a 25 ml unitunito-two-port 2h bottle, and reacted 30 C, under unituniteous conditions, and concentrated, under inert atmosphere protection, unitant-like conditions. The eluate fractions of all the products 10:1 detected were collected by chromatography with petroleum ether: ethyl acetate in the timetime as eluent column chromatography, and the solvent was evaporated to obtain the residue unit, 31 mg and gave rise 65% to unit_.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; China Pharmaceutical University; Du Ding; Sun Kewen; (10 pag.)CN110156800; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 99365-40-9, The chemical industry reduces the impact on the environment during synthesis 99365-40-9, name is 6-Bromoindolin-2-one, I believe this compound will play a more active role in future production and life.

To a warm, stirred solution of 6-bromo-2-oxindole (4 g, 26.3 mmol) in 60 mL toluene and 60 mL ethanol was added tetrakis(triphenylphosphine)palladium(0) (2.3 g, 1.9 mmol) followed by 2M aqueous sodium carbonate (50 mL, 100 mmol) and pyridine-3-boronic acid, propanediol ester (5 g, 30.7 mmol). The mixture was stirred at 100 C. in an oil bath for 12 hours. The reaction mixture was cooled, diluted with ethyl acetate (500 mL) and washed with saturated sodium bicarbonate (200 mL), water (200 mL) and brine (200 mL). The organic layer was separated, dried over anhydrous magnesium sulfate and concentrated to afford a brown solid. The solid was triturated with methylene chloride/diethyl ether to give 2.32 g (42%) of 6-pyridin-3-yl-1,3-dihydro-indol-2-one as a brown solid. 1H NMR (360 MHz, DMSO-d6) delta 10.51 (s, 1H, NH), 8.81 (d, J=2.5 Hz, 1H, Ar-H), 8.55 (dd, J=1.8 and 5.7 Hz, 1H, Ar-H), 8 (m, 1H, Ar-H), 7.45 (dd, J=5.7 and 9.3 Hz, 1H, Ar-H), 7.3 (m, 2H, Ar-H), 7.05 (s, 1H, Ar-H), 3.51 (s, 2H, CH2CO). MS: 210 [M]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Bromoindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Sugen, Inc.; US6689806; (2004); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 337536-15-9,Some common heterocyclic compound, 337536-15-9, name is 4-Bromoisoindolin-1-one, molecular formula is C8H6BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Bromoisoindolin-1-one (11.5 mg, 0.0542 mmol), N-(6-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan- 2-yl)naphthalen-2-yl)thiophene-3-carboxamide (43.3 mg, 0.114 mmol), Fibercat palladium catalyst (Johnson-Matthey, 21.0 mg), and K2CO3 (2 M in water, 0.1 ml, 0.2 mmol) were combined in a microwave reaction vessel and 1,4-dioxane (0.55 ml) was added. The reaction tube was sealed and heated in the microwave (CEM microwave) for 10 minutes at 50 Watts and 80 C. The reaction was cooled to room temperature, diluted with water (10 ml), and extracted with dichloromethane (6 x 5 ml). The organic extracts were combined, dried over sodium sulfate, filtered, and concentrated. The crude material was washed with 15:1 hexanes / EtOAc and then purified on HPLC (10% -> 95% MeCN / water with 0.1% TFA) to afford title compound (4.9 mg, 24%). MS (ESI pos. ion) m/z: 385 (M+H). Calc’d Exact Mass for C23Hi6N2O2S: 384.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Bromoisoindolin-1-one, its application will become more common.

Reference:
Patent; AMGEN INC.; WO2007/5668; (2007); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 875003-43-3, name is 7-Fluoro-1-methylindoline-2,3-dione, molecular formula is C9H6FNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: indolines-derivatives

20.64 mg of N-methyl-7-fluoroisidine, 27.22 mg (28.06 mL) of trimethyl orthoformate and an appropriate amount of phosphotungstic acid were charged in a IOOmL flask, and the mixture was stirred at room temperature with Thin layer chromatography to determine whether there is a new product generation and tracking the progress of the reaction, the reaction is complete, add appropriate amount of triethylamine neutralization reaction to neutral, the reaction is complete after the reaction solution evaporated under pressure, the concentrate water, solid matter Precipitation, filtration, washing filter cake, the target product to obtain crude products, recrystallization can be pure target products.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 875003-43-3, its application will become more common.

Reference:
Patent; Shaanxi University of Science and Technology; Liang Chengyuan; Jia Minyi; Song Huihui; (15 pag.)CN106632365; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 774-47-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 774-47-0, name is 5,6-Difluoroindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Dissolved 5,6-difluoroindoline-2,3-dione (14) (0.714 g,3.899 mmol) in 25 mL of MeOH, under argon atmosphere, and refluxedthe resulting solution at 60 C for 15 min. p-toluenesulfonyl hydrazide(0.807 g, 4.333 mmol), dissolved in 5 mL of MeOH, was added to thehot solution in one portion. The resulting reaction mix was refluxed, at60 C for 24 h. Consequently, the reaction mixture was allowed to coolto room temperature, gradually, and filtered to afford a yellow precipitate.The precipitate was dissolved in 30 mL of distilled water,containing sodium hydroxide (0.331 g, 8.275 mmol), and heated to64 C for 4 h. Solid carbon dioxide was added to the cooled reactionmixture to precipitate the pure diazo product, UIAA-II-187 (15), whichwas filtered and concentrated. 52% yield. 1H NMR (300 MHz, DMSO)delta = 10.83 (bs, 1H), 7.64 (dd, J = 7.82, 10.65 Hz, 1H), 6.96 (dd,J = 7.07, 10.83 Hz, 1H). 19F NMR (282 MHz, DMSO) delta = -142.37 (m,1F), -147.72 (ddd, J = 6.96, 10.71, 21.72 Hz, 1F). HRMS (ESI) calculatedfor (M + H+) 196.0317, found 196.0323. Retention time(analytical HPLC) = 14.9 min.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5,6-Difluoroindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Aguirre, Arturo L.; Chheda, Pratik R.; Groves, Natalie P.; Held, Hailey A.; Hiasa, Hiroshi; Kerns, Robert J.; Lentz, Sarah R. C.; Bioorganic and medicinal chemistry; (2020);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 132898-96-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A stirred solution of N-Boc protected pyrrolidine (1.00 mmol) in dry DCM (2.2 mL) at 0 C under argon atmosphere was treated dropwise with TFA (10.00 mmol). Stirring was continued at 0 C for 30 min and at ambient temperature for 2 h. Subsequently, the solution was poured to ice-cooled 10% aq NaOH (15 mL) and extracted with DCM (3 × 15 mL). The combined organic phase was dried over MgSO4 and concentrated in vacuo to obtain a colorless oil as the corresponding unprotected pyrrolidine. After that a solution of the free pyrrolidine and DIPEA (2.00 mmol) in CHCl3 (1.1 mL) was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.50 mmol) in CHCl3/THF (1:1, 19 mL) at room temperature. The resulting solution was stirred at room temperature for 1 h and the solvent was completely removed in vacuo. The crude product was purified by flash column chromatography to obtain the corresponding inhibitors.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,3-Dioxoindoline-5-sulfonyl chloride, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Limpachayaporn, Panupun; Schaefers, Michael; Schober, Otmar; Kopka, Klaus; Haufe, Guenter; Bioorganic and Medicinal Chemistry; vol. 21; 7; (2013); p. 2025 – 2036;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 2,3-Dioxoindoline-5-sulfonyl chloride

Step 3: 8-{[(2S)-2-(Methoxymethyl)-2,3-dihydro-1H-indol-1-yl]sulfonyl}-3,3-dimethyl-3,4-dihydropyrimido[1,2-a]indol-10(2H)-one The title compound was prepared from 2,3-dioxo-2,3-dihydro-1H-indole-5-sulfonylchloride and (S)-2-methoxymethyl-2,3-dihydro-1H-indole as a yellow solid according to a procedure similar to that of Example 12. NMR (400 Mz, DMSO-d6): consistent. MS: (ES-) m/z 438 [M-H]. m.p.: 173.4-175.0 C.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 132898-96-5.

Reference:
Patent; Wyeth; US2005/250798; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 611-09-6,Some common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, molecular formula is C8H4N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 30 mg of SiO2_g-C3N4 nanocomposite was dispersed in aqueous media (3 ml) for 30 min and dimedone or 4-hydroxycoumarin (1 mmol), malononitrile (1 mmol) and isatin (1.0 mmol) were added to the mixture. Then, the mixture was stirred at reflux conditions for an appropriate time, while the reaction progress was monitored by thin layer chromatography (TLC). After the reaction was completed, ethyl acetate was employed for the extraction of crude product and the products were dried over anhydrous Na2SO4. The solvent was evaporated followed by recrystallizing of the crude product in hot ethanol, and pure products were identified by IR, 1H and 13C NMR spectral data. The SiO2_g-C3N4 nanocatalyst was washed with EtOH, dried and reused for the next run.

The synthetic route of 611-09-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri, Mohammad Ali; Research on Chemical Intermediates; vol. 44; 2; (2018); p. 1173 – 1188;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 496-12-8 as follows. HPLC of Formula: C8H9N

General procedure: A solution of N-heterocycle compound (0.2 mmol) and graphene oxide (GO) (8 mg) in N,N-dimethylformamide(1.0 mL) was stirred in a sealed tube under an atmosphere of argon at 150 C for 18 h. After being cooled to room temperature,the reaction mixture was filtered and washed with ethyl acetate (20 mL). Afterward, 10 mL water was added tothe solution and extracted with ethyl acetate (3 × 15 mL), the combined organic layers were dried over anhydrous Na2SO4.The solvent was evaporated under vacuum and the crude product was purified by preparative thin-layer chromatography (TLC) on silica gel with petroleum ether and ethyl acetate to achieve the pure product.

According to the analysis of related databases, 496-12-8, the application of this compound in the production field has become more and more popular.

Reference:
Article; Ma, Juan; Zhang, Jingyu; Zhou, Xiao; Wang, Jiawei; Gong, Hang; Journal of the Iranian Chemical Society; vol. 15; 12; (2018); p. 2851 – 2860;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem