Category: indolines-derivatives

Reference of 324-03-8, These common heterocyclic compound, 324-03-8, name is 6-Fluoroindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

compound 119 6-fluoroindoline-2,3-dione (15.05 g, 91.1mmol), urea (5.47g, 91.1mmol), p-TSA (7.85 g, 45.57 mmol) and methyl acetoacetate (10.6 g, 91.1 mmol) in acetonitrile (500 mL) was refluxed overweekend. The reaction mixture was allowed to cool to room temperature. The precipitate was filtered off. The precipitate was taken up in CH2CI2 (1L) and saturated NaHC03 solution (500mL). The mixture was stirred vigorously during 15 minutes. The precipitate was filtered off and dried in vacuo, resulting in compound 119 as a beige powder (9.25 g). Method A; Rt: 0.61 m/z : 323.1 (M+NH4)+ Exact mass: 305.1; 1H NMR (400 MHz, DMSO-dg) delta ppm 2.24 (s, 3 H), 3.32 (s, 3 H), 6.57 (dd, J=9.4, 2.3 Hz, 1 H), 6.63 – 6.75 (m, 1 H), 7.13 (dd, J=8.0, 5.6 Hz, 1 H), 7.81 (s, 1 H), 8.31 – 11.56 (m, 2 H).

Statistics shows that 6-Fluoroindoline-2,3-dione is playing an increasingly important role. we look forward to future research findings about 324-03-8.

Reference:
Patent; JANSSEN R&D IRELAND; VANDYCK, Koen; HACHE, Geerwin Yvonne Paul; ROMBOUTS, Geert; VERSCHUEREN, Wim Gaston; RABOISSON, Pierre Jean-Marie Bernard; WO2013/102655; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 19727-83-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 19727-83-4 as follows.

General procedure: In a 2-neck RBF, 1 (20 mg, 0.0005 mmol) and TMNO (45 mg, 0.6 mmol) were suspended in toluene (4 mL) and to this solution indoline (60 mg, 0.5 mmol) was added. The reaction mixture was then heated to 100 oC for 20 h and it was filtered and solvent evaporated. The crude product obtained was purified by column chromatography using hexane/ethylacetate (7:1) as eluent to give pure indole (47 mg, 79%). A similar procedure was used for the other indolines and N-heterocycles.

According to the analysis of related databases, 19727-83-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Kumaran, Elumalai; Leong, Weng Kee; Tetrahedron Letters; vol. 59; 44; (2018); p. 3958 – 3960;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 496-12-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 496-12-8 name is Isoindoline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Preparation of the title compound was initiated by subjecting the product from step 2 A (0.02 g, 0.03 mmol) to isoindoline (0.01 g, 0.06 mmol) andDBU (0.01 g, 0.06 mmol) in 1 mL DCM at 45 0C for 3 h. Once complete byMS analysis, the reaction was diluted with 10 mL EtOAc and extracted withNaHCtheta3 (2 x 10 mL) and brine (2 x 20 mL). The organic phase was dried over anhydrous Na2SO4, filtered, and then concentrated in vacuo. The residue was purified by silica gel flash chromatography using 70%EtOAc/hexanes affording pyridazinone 4a. (0.01 g, 64 %).MS (ESI) m/z = 755.3 (M+H)+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Isoindoline, and friends who are interested can also refer to it.

Reference:
Patent; ENANTA PHARMACEUTICALS, INC.; WO2008/19266; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 1029691-06-2, name is 2-(3-Oxocyclopentyl)isoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C13H11NO3

To a mixture of DIPEA (5.32 g, 41.17 mmol) and S4 (5.9 g, 25.73 mmol) in DCM (100 mL) was added Tf2O (8.7 g, 30.9 mmol) dropwise at 0 C. for 30 min. The reaction mixture was stirred at 0 C. for 16 hrs. After dilution with DCM, the mixture was washed with aq. NH4Cl solution and aq. NaHCO3solution successively. The organic phase was dried over anhydrous Na2SO4, filtered and concentrated to give crude product, which was purified by column chromatography on silica gel (eluted with petroleum ether: ethyl acetate=4:1) to give the title compound (6.3 g, 67.7% yield) as off-white solid.

The synthetic route of 2-(3-Oxocyclopentyl)isoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACHILLION PHARMACEUTICALS, INC.; WILES, Jason, Allan; PHADKE, Avinash, S.; DESHPANDE, Milind; AGARWAK, Atul; CHEN, Dawei; GADHACHANDA, Venkat, Rao; HASHIMOTO, Akihiro; PAIS, Godwin; WANG, Qiuping; WANG, Xiangzhu; (905 pag.)WO2017/35353; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 41910-64-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 41910-64-9, name is 4-Chloroindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Step 2d: 2 ml of toluene, 90 mg of ethyl (1-cyclopropyl-4-morpholin-4-yl-6-oxo-1,6-dihydropyrimidin-2-yl)acetate and, finally, dropwise, 0.55 ml of a 2M solution of trimethylaluminum in toluene are successively added to a solution of 113 mg of 4-chloroindoline in 4 ml of tetrahydrofuran. The reaction mixture is heated at 90 C. for 4 hours, and then cooled to ambient temperature, and 5 ml of methanol are added. After the addition of 10 g of silica, the reaction mixture is concentrated under reduced pressure. After purification by silica column chromatography (solid deposit), elution being carried out with a mixture of dichloromethane and methanol (100/0 then 98/02 V/V), 39 mg of 2-[2-(4-chloro-2,3-dihydro-1H-indol-1-yl)-2-oxoethyl]-3-cyclopropyl-6-(morpholin-4-yl)pyrimidin-4(3H)-one are obtained in the form of a white solid, the characteristics of which are the following:1H NMR spectrum (400 MHz): 0.83 (m, 2H); 1.07 (m, 2H); 2.69 (m, 1H); 3.18 (t, J=8.6 Hz, 2H); 3.36 (m, 4H); 3.55 (m, 4H); 4.18 (s, 2H); 4.23 (t, J=8.6 Hz, 2H); 5.27 (s, 1H); 7.09 (d, J=8.1 Hz, 1H); 7.21 (t, J=8.1 Hz, 1H); 7.98 (d, J=7.9 Hz, 1H)Mass spectrometry: method ARetention time Tr (min)=0.85;[M+H]+: m/z 415; [M-H]-: m/z 413

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Chloroindoline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SANOFI; Brollo, Maurice; Carry, Jean-Christophe; Certal, Victor; Didier, Eric; Doerflinger, Gilles; EL Ahmad, Youssef; Filoche-Romme, Bruno; Halley, Frank; Karlsson, Karl Andreas; Schio, Laurent; Thompson, Fabienne; US2013/274253; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 35197-64-9, name is 2-Bromo-4-(1,3-dioxoisoindolin-2-yl)butanoic acid, molecular formula is C12H10BrNO4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 35197-64-9

Example 373 (BVT056664); 2-{2-[2-(bicyclo [2.2. 1] hept-5-en-2-ylamino)-4-oxo-4, 5-dihydro-1, 3-thiazol-5-yl] ethyl}- I H-isoindole-1, 3 (2H)-dione; 2-bromo-4-(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)butanoic acid (0.204 g, 0.654 mmol) and N-bicyclo [2.2. 1] hept-5-en-2-ylthiourea (0.112 g, 0.666 mmol) were dissolved in acetone (15 ml) and heated to reflux for 8h. The reaction mixture was allowed to cool to room temperature. NaHCO3 (sat. solution) was added and extraction with DCM was performed. The organic phase was concentrated in vacuum to give the crude product (0.269 g) of which 10 mg was purified using preparative LC-MS (System C, 20-80% MeCN). 7mg, yield ‘H NMR (270 MHz, CHLOROFORM-D) 1.65-1. 84 (m, 4 H) 2.16-2. 37 (m, 1 H) 2.57-2. 73 (m, 1 H) 2.99-3. 11 (m, 2 H) 3.37 (t, J=4. 58 Hz, 1 H) 3.73-3. 88 (m, 1 H) 3.96-4. 12 (m, 1 H) 4.20 (dd, J=10. 27,3. 59 Hz, 1 H) 6.03-6. 10 (m, 1 H) 6.29 (dd, J=5. 69,2. 97 Hz, 1 H) 7.73- 7.81 (m, 2 H) 7.81-7. 91 (m, 2 H) MS (ESI+) for C2oHi9N303S/ 382 (M+H) +

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 35197-64-9, its application will become more common.

Reference:
Patent; BIOVITRUM AB; WO2005/75471; (2005); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 20870-79-5,Some common heterocyclic compound, 20870-79-5, name is 5-Nitroindolin-2-one, molecular formula is C8H6N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a suspension of 5-nitroindolin-2-one (5 g, 1 eq.) in EtOH(50 mL), activated carbon (1 g) and FeCl3 (1 g) were added.The mixture was heated to 78 C, and stirred for 10 min.Then 80% aqueous solution of hydrazine hydrate (8 eq.)was added dropwise into the reaction mixture in 5 min, theresulting mixture was stirred at 78 C for 8-10 h, thencooled to room temperature. The mixture was filtered to remove residue of activated carbon; the filtrate was concentratedunder vacuum to afford crude product, which waspurified by recrystallization from EtOH (about 15 mL) togive 5-aminoindolin-2-one as a pale yellow solid (yield91.9%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Nitroindolin-2-one, its application will become more common.

Reference:
Article; Zhou, Yuanzheng; Ju, Yuan; Yang, Yang; Sang, Zitai; Wang, Zhenling; He, Gu; Yang, Tao; Luo, Youfu; Journal of Antibiotics; vol. 71; 10; (2018); p. 887 – 897;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 603-62-3, name is 3-Nitrophthalimide, A new synthetic method of this compound is introduced below., Computed Properties of C8H4N2O4

a) Preparation of 6-nitrophthalamic acid:; A suspension of 57.6 g of 3-nitro-phthalimide (0.3 mol) in 672 g of water is cooled to 5C. 80 g of 30% sodium hydroxide solution (0.6 mol, 2 equivalents) are added in the shortest possible time. After 2 hours at 5C, the reaction mixture is added at 5C to 65 g of 32% hydrochloric acid solution (0.57 mol, 1.9 equivalents), which is diluted beforehand with 72 ml of water. The pH value is adjusted to 2-2.5 and the crude product which crystallises out is filtered off and washed twice with water. 6-Nitrophthalamic acid is obtained in a yield of 73%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SYNGENTA PARTICIPATIONS AG.; SYNGENTA LIMITED.; WO2007/31323; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 2436-29-5,Some common heterocyclic compound, 2436-29-5, name is 3-(1,3-Dioxoisoindolin-2-yl)propanal, molecular formula is C11H9NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of (R)-(l-amino-but-3-ynyl)-7-chloro-3-phenylamino-3H-quinazolin-4-one (4.60 g, 12.2 mmol) and diisopropylethylamine (DIPEA) (5.5 ml) in dichloromethane (60 ml) was added a solution of 3-(l,3-dioxo-l,3-dihydro-isoindol-2-yl)-propionaldehyde (2.45 g, 12.1 mmol) in dichloroethane (10 ml), followed by a solution of sodium triacetoxy borohydride (NaBH(OAc)3) (0.25M in dichloroethane, 100 ml). The reaction mixture was stirred at room temperature and the reaction progress was monitored by HPLC/MS. Upon completion, a saturated sodium carbonate solution (100 ml) was added. The resulted organic layer was collected and washed with brine solution. The solvent was removed and residue was purified by flash column to afford 2- {3-[(R)- 1 -(7-chloro-4-oxo-3-phenylamino-3,4-dihydro-quinazolin-2-yl)-but-3- ynylamino]-propyl}-isoindole-l,3-dione (6.1 g, 95%) as off-white solid. M.p. 78-80 0C. LCMS: m/e 526 [M+H]. 1H NMR (DMSO-d6): delta 9.09 (s, br, IH), 8.07 (d, J= 8.8 Hz, IH), 7.74 (m, IH), 7.83-7.76 (m, 5H), 7.58 (dd, J= 8.8 and 2.0 Hz, IH), 7.17 (t, J= 7.6 Hz, 2H), 6.83 (brm, IH), 6.65 (m, 2H), 4.1 and 4.0 (s,s, br, IH, rotomers), 3.6 (t, J= 6.8Hz, 2H), 2.75 (s, br, 1 H), 2.67- 2.52 (brm, 2H), 2.35 (brm, 2H), 1.67 (brm, 2H).

The synthetic route of 2436-29-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARQULE, INC.; WO2009/2808; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 6872-06-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 6872-06-6 name is 2-Methylindoline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

2-methylindoline (3.26 g, 24.5 mmol) and hexane (0.536 M, 45.7 ml) were placed in a 100 ml Schlenk flask. N-BuLi (1.1 eq, 10.8 ml) was added at -20 & lt; 0 & gt; C and allowed to stand at room temperature overnight. Filtered through glass frit (G4) and vacuum dried to obtain phosphine-amine lithium. The phosphine-amine lithium (3.37 g, 24.2 mmol) was added to diethyl ether (0.423 M, 57.3 ml) in a 250 ml Schlenk flask and CO 2 bubbling was performed at -78 C for 1 hour. THF (1.1 eq, 2.16 ml) and t-BuLi (1.1 eq, 15.7 ml) were added at -20 C and kept at this temperature for 2 hours. IPr2PCl (0.85 eq, 3.14 g) and diethyl ether (0.359 M, 57.3 ml) were added at the same temperature and maintained at the same temperature for 1 hour. After slowly reacting at room temperature overnight, 50 ml of distilled water was added at 0 C, followed by stirring at room temperature for 30 minutes. Work-up with diethyl ether, drying over MgSO4, and then red oil was obtained in 2.23 g, 37% yield via hexane, diethyl ether 50: 1 column.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Methylindoline, and friends who are interested can also refer to it.

Reference:
Patent; LG CHEM, LTD.; JANG, Jae Kwon; PARK, In Sung; KIM, Seul Ki; LEE, Eun Jung; LEE, Chong Hoon; HAN, Ki Won; HAN, Hyo Jung; (18 pag.)KR2017/68331; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem