Category: indolines-derivatives

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, A new synthetic method of this compound is introduced below., Safety of 2-Oxoindoline-5-carboxylic Acid

2-Oxo-3-(4-oxo-4,5,6,7-tetrahydro-2H-pyrrolo[3,4-c]pyridin-1-ylmethylene)-2,3-dihydro-1H-indole-5-carboxylic acid A mixture of 2-oxo-2,3-dihydro-1H-indole-5-carboxylic acid (44.5 mg, 0.25 mmol), 4-oxo-4,5,6,7-tetrahydro-2H-pyrrolo[3,4-c]pyridine-1-carbaldehyde (41 mg, 0.25 mmol) and 0.1 mL of piperidine in ethanol (1 mL) was heated in a sealed tube at 80 C. for 6 hours. The precipitate was collected by vacuum filtration, washed with cold ethanol. The solid was then dissolved in methanol, the insoluble materials were removed and the filtrate was concentrated to give 20 mg (25%) of the title compound as a yellow solid. 1NMR (300 MHz, DMSO-d6) delta 13.59 (s, 1H, NH), 11.10 (br s, 1H, NH), 8.24 (s, 1H), 7.76 (d, J=7.8 Hz, 1H), 7.65 (m, 2H), 7.37 (br s, 1H, NH), 6.78 (d, J=8.1 Hz, 1H), 3.38 (m, CH2), 3.0 (t, 2H, CH2). MS m/z 324 [M++1].

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Tang, Peng Cho; Miller, Todd A.; Li, Xiaoyuan; Zhang, Ruofei; Cui, Jinrong; Huang, Ping; Wei, Chung Chun; US2002/42427; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 883-44-3, name is 2-(3-Hydroxypropyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., HPLC of Formula: C11H11NO3

Compound 359l-(3-((((2R^S,4R,5R)-5 6-amino-9H-purin-9-yl)-3,4-dihydroxytetrahydrofuran-2- yl)methyl)(isopropyl)amino)propyl)-3-(3-chlorophenyl)ureaStep 1. Preparation of 2-(3-((((3aR,4R,6R,6aR)-6-(6-amino-9H-purin-9-yl)-2,2- dimethyltetrahydrofuro[3,4-d][l,3]dioxol-4-yl)methyl)amino)propyl)isoindoline-l,3- dioneTo a solution of 2-(3-hydroxypropyl)isoindoline-l,3-dione (1.0 g, 4.88 mmol) in EA (50 mL) was added IBX (3.4 g, 12.19 mmol). The mixture was heated to reflux for 2h. After cooling, the mixture was filtered and the filtrate was concentrated to give 3-(l,3- dioxoisoindolin-2-yl)propanal crude (not weight), which was directly used for next step.To a solution of 9-((3aR,4R,6R,6aR)-6-(aminomethyl)-2,2- dimethyltetrahydrofuro[3,4-d][l,3]dioxol-4-yl)-9H-purin-6-amine (1.5 g, 4.90 mmol) and 3- (l ,3-dioxoisoindolin-2-yl)propanal (from last step) in DCE (50 mL) was added NaBH(OAc)3 (1.56 g, 7.30 mmol). The reaction mixture was stirred at rt overnight then saturated NaHC03 aqueous solution (50 mL) was added. The resulting mixture was extracted with DCM (50 mL x 2). The combined organic layers were dried over Na2S04 and concentrated. The residue was purified by SGC (DCM : MeOH = 100 : 1 to 10 : 1) to afford the title compound (1.38 g, yield: 57%) as a white solid. 1H NMR (500 MHz, MeOD): 58.30 (s, 1H), 8.23 (s, 1H), 7.85-7.79 (m, 4H), 6.17 (d, J = 2.5 Hz, 1H), 5.48 (dd, J = 2.5, 6.0 Hz, 1H), 5.03 (dd, J = 3.0, 6.5 Hz, 1H), 4.36 (t , J = 3.5 Hz, 1H), 3.67-3.65 (m, 2H), 2.94-2.89 (m, 2H), 2.62-2.60 (m, 2H), 1.82-1.79 (m, 2H), 1.60 (s, 9H), 1.39 (s, 3H) ppm; ESI-MS (m/z): 494.2 [M+l]+.

The synthetic route of 883-44-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; EPIZYME, INC.; CHESWORTH, Richard; KUNTZ, Kevin, Wayne; OLHAVA, Edward, James; PATANE, Michael, A.; WO2012/82436; (2012); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 17630-75-0, name is 5-Chloro-2-oxindole, A new synthetic method of this compound is introduced below., COA of Formula: C8H6ClNO

General procedure: To a Schlenk tube were added indolin-2-one 1 (0.3 mmol), t-BuOOH (0.6 mmol), and DCE (2 mL). Then the tube was stirred at 85 oC under air for the indicated time until complete consumption of starting material monitored by TLC analysis. After the reaction was finished, the reaction mixture was washed with brine. The aqueous phase was re-extracted with ethyl acetate (3×10 mL). The combined organic extracts were dried over Na2SO4, removal of the solvent under vacuum afforded the crude product, which was purified further by column chromatography using hexane-ethyl acetate (10:1).

The synthetic route of 17630-75-0 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ying, Wei-Wei; Zhu, Wen-Ming; Liang, Hongze; Wei, Wen-Ting; Synlett; vol. 29; 2; (2018); p. 215 – 218;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2436-29-5, name is 3-(1,3-Dioxoisoindolin-2-yl)propanal, A new synthetic method of this compound is introduced below., Computed Properties of C11H9NO3

Compound 359l-(3-((((2R^S,4R,5R)-5 6-amino-9H-purin-9-yl)-3,4-dihydroxytetrahydrofuran-2- yl)methyl)(isopropyl)amino)propyl)-3-(3-chlorophenyl)ureaStep 1. Preparation of 2-(3-((((3aR,4R,6R,6aR)-6-(6-amino-9H-purin-9-yl)-2,2- dimethyltetrahydrofuro[3,4-d][l,3]dioxol-4-yl)methyl)amino)propyl)isoindoline-l,3- dioneTo a solution of 2-(3-hydroxypropyl)isoindoline-l,3-dione (1.0 g, 4.88 mmol) in EA (50 mL) was added IBX (3.4 g, 12.19 mmol). The mixture was heated to reflux for 2h. After cooling, the mixture was filtered and the filtrate was concentrated to give 3-(l,3- dioxoisoindolin-2-yl)propanal crude (not weight), which was directly used for next step.To a solution of 9-((3aR,4R,6R,6aR)-6-(aminomethyl)-2,2- dimethyltetrahydrofuro[3,4-d][l,3]dioxol-4-yl)-9H-purin-6-amine (1.5 g, 4.90 mmol) and 3- (l ,3-dioxoisoindolin-2-yl)propanal (from last step) in DCE (50 mL) was added NaBH(OAc)3 (1.56 g, 7.30 mmol). The reaction mixture was stirred at rt overnight then saturated NaHC03 aqueous solution (50 mL) was added. The resulting mixture was extracted with DCM (50 mL x 2). The combined organic layers were dried over Na2S04 and concentrated. The residue was purified by SGC (DCM : MeOH = 100 : 1 to 10 : 1) to afford the title compound (1.38 g, yield: 57%) as a white solid. 1H NMR (500 MHz, MeOD): 58.30 (s, 1H), 8.23 (s, 1H), 7.85-7.79 (m, 4H), 6.17 (d, J = 2.5 Hz, 1H), 5.48 (dd, J = 2.5, 6.0 Hz, 1H), 5.03 (dd, J = 3.0, 6.5 Hz, 1H), 4.36 (t , J = 3.5 Hz, 1H), 3.67-3.65 (m, 2H), 2.94-2.89 (m, 2H), 2.62-2.60 (m, 2H), 1.82-1.79 (m, 2H), 1.60 (s, 9H), 1.39 (s, 3H) ppm; ESI-MS (m/z): 494.2 [M+l]+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; EPIZYME, INC.; CHESWORTH, Richard; KUNTZ, Kevin, Wayne; OLHAVA, Edward, James; PATANE, Michael, A.; WO2012/82436; (2012); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 324-03-8, name is 6-Fluoroindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C8H4FNO2

Intermediate 1 A6-bromo-2-(trifluoromethyl)quinoline-4-carboxylic acid 300 mg (1.33 mmol) of 5-bromo-1 H-indole-2,3-dione was suspended in 3 mL water in a microwave vial. 82 mg ( 1.46 mmol) potassium hydroxide, 152 muL (2.65 mmol) acetic acid and 152 mg (1.86 mmol) sodium acetate were added so that the pH was around 5. The solution was cooled to 10 C and 238 muL (2.65 mmol) 1 ,1,1 -trifluoroacetone was added rapidly, the microwave vial was sealed and heated in the microwave for 2 h at 120 C. The reaction was stopped by the addition of 10% aqueous hydrochloric acid solution and the resulting precipitate was isolated by filtration, washed with water and dried in a vacuum drying cabinet at 50 C overnight to obtain 409 mg (1.28 mmol, 96%) of the desired title compound .1 H NMR (300 MHz, DMSO d6): delta (ppm) = 8.14 (dd, 1 H), 8.21 (d, 1 H), 8.32 (s, 1 H), 9.09 (d, 1 H), 14.50 (br. s. , 1 H)._n analogy to intermediate 1 A, 200 mg (1.21 mmol) 6-fluoro-1 H-indole-2,3-dione was heated with 217 muL (2.42 mmol) 1 ,1 ,1 -trifluoroacetone, 75 mg (1.33 mmol) potassium hydroxide, 139 muL (2.42 mmol) acetic acid and 139 mg (1.70 mmol) sodium acetate in 2 mL water for 2 h at 80 C in the microwave. As the conversion was not complete further 217 muL (2.42 mmol) 1,1 ,1 -trifluoroacetone was added to the reaction mixture and heated again for 1 h at 80 C in the microwave. Once again 217 muL (2.42 mmol) 1 ,1 ,1-trifluoroacetone was added and the reaction mixture was heated a third time for 1 h at 100 C in the microwave to obtain 227 mg (0.88 mmol, 72%) of the desired title compound after aqueous work-up.1 H NMR (300 MHz, DMSO d6): delta (ppm) = 7.83 – 7.93 (m, 1 H), 8.10 (dd, 1 H), 8.26 (s, 1 H), 8.90 (dd, 1 H), 14.51 (br. s. , 1 H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 324-03-8.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; HEISLER, Iring; MUeLLER, Thomas; SIEBENEICHER, Holger; BUCHMANN, Bernd; CLEVE, Arwed; GUeNTHER, Judith; KOPPITZ, Marcus; HEROULT, Melanie; NEUHAUS, Roland; PETRUL, Heike; QUANZ-SCHOeFFEL, Maria; WO2015/91428; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 16800-68-3,Some common heterocyclic compound, 16800-68-3, name is 1-Acetylindolin-3-one, molecular formula is C10H9NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 1a (35.0 mg, 0.2 mmol, 1 equiv.), tert-BuOK (22.4 mg, 0.2 mmol, 1.0 equiv.) were added to a Schlenk tube. Then 2 ml THF was added using a syringe. The reaction mixture was stirred 15min,and then added iodonium salt 2 (0.2 mmol, 1.0 eq). The reaction was stirred at 30C for 10 hours.After cooling to room temperature, the solvent was removed in vacuo and the residue was purifiedby silica gel using a proper eluent (EtOAc/Hexane) to afford the desired products

The synthetic route of 16800-68-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhang, Yanxia; Han, Jianwei; Liu, Zhen-Jiang; Synlett; vol. 26; 18; (2015); p. 2593 – 2597;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 346-34-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 346-34-9, name is 4-Fluoroindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Intermediate 1 A6-bromo-2-(trifluoromethyl)quinoline-4-carboxylic acid 300 mg (1.33 mmol) of 5-bromo-1 H-indole-2,3-dione was suspended in 3 mL water in a microwave vial. 82 mg ( 1.46 mmol) potassium hydroxide, 152 muL (2.65 mmol) acetic acid and 152 mg (1.86 mmol) sodium acetate were added so that the pH was around 5. The solution was cooled to 10 C and 238 muL (2.65 mmol) 1 ,1,1 -trifluoroacetone was added rapidly, the microwave vial was sealed and heated in the microwave for 2 h at 120 C. The reaction was stopped by the addition of 10% aqueous hydrochloric acid solution and the resulting precipitate was isolated by filtration, washed with water and dried in a vacuum drying cabinet at 50 C overnight to obtain 409 mg (1.28 mmol, 96%) of the desired title compound .In analogy to intermediate 1 A, 300 mg (1.82 mmol) 4-fluoro-1 H-indole-2,3-dione was heated with 900 muL (9.08 mmol) 1 -cyclopropylethanone, 112 mg (2.00 mmol) potassium hydroxide, 208 muL (3.63 mmol) acetic acid and 209 mg (2.54 mmol) sodium acetate in 3 mL water for 6 h at 150 C in the microwave. The reaction mixture was quenched with 10% hydrochloric acid solution and filtered. The filtrate was extracted with ethyl acetate and the combined organic layers were washed with brine, dried over sodium sulfate, filtered and evaporated to obtain 120 mg (0.52 mmol, 29%) of the desired title compound after drying.1 H NMR (400 MHz, DMSO d6): delta (ppm) = 1.10 – 1.17 (m, 4 H), 2.40 – 2.47 (m, 1 H), 7.52 – 7.60 (m, 2 H), 7.93 (s, 1 H), 8.35 – 8.41 (m, 1 H,) 13.98 (br. s, 1 H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Fluoroindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; HEISLER, Iring; MUeLLER, Thomas; SIEBENEICHER, Holger; BUCHMANN, Bernd; CLEVE, Arwed; GUeNTHER, Judith; KOPPITZ, Marcus; HEROULT, Melanie; NEUHAUS, Roland; PETRUL, Heike; QUANZ-SCHOeFFEL, Maria; WO2015/91428; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 317-20-4, name is 7-Fluoroisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 317-20-4, Safety of 7-Fluoroisatin

In another example, 7-fluoro-N-((2-(trimethylsilyl)ethoxy)methyl)indoline-2,3-dione (S3) is prepared according to Scheme 1e: 7-Fluoroisatin (SM3) (1.50 g, 9.08 mmol, 1.0 equiv) was dissolved in N,N-dimethylformamide (30 mL), and the resultant red solution was cooled to 0 C. Sodium hydride (436 mg, 10.9 mmol, 60% dispersion in mineral oil, 1.2 equiv) was added in two portions resulting in a purple suspension. The mixture was allowed to warm to rt for 20 min with vigorous stirring, then cooled to 0 C. 2-(Trimethylsilyl)ethoxymethyl chloride (1.91 mL, 10.8 mmol, 1.2 equiv) was added dropwise, and the dark brown solution was maintained at 0 C. for 1.5 hr, then poured into brine (10 mL) at 0 C. The resulting mixture was extracted with Et2O (4×20 mL), and the combined organic extracts were dried over Na2SO4, and concentrated. Purification of the residue by silica gel flash column chromatography (1:4 EtOAc-hexanes) gave isatin derivative S3 (2.44 g, 91%) as an orange solid: mp 5556 C.; Rf 0.51 (1:3 EtOAc-hexanes); 1H NMR (500 MHz, CDCl3): delta 7.40 (d, J=7.5, 1H), 7.34 (dd J=11.1, 8.4, 1H), 7.09 (td, J=11.6, 3.9, 1H), 5.19 (s, 2H), 3.56 (t, J=7.7, 2H), 0.87 (t, J=7.7, 2H), 0.10 (s, 9H); 13C NMR (125 MHz, CDCl3): delta 182.8 (d, J=1.9, C), 158.1 (C), 148.5 (d, J=249.2, C), 136.5 (d, J=9.6, C), 126.6 (d, J=19.6, CH), 125.2 (d, J=5.8, CH), 121.4 (d, J=3.4, CH), 120.6, (d, J=2.5, C), 71.2, (d, J=4.9, CH2), 66.9 (CH2), 17.8 (CH2), 1.5 (CH3); IR (film): 1746, 1627 cm1; HRMS-ESI (m/z) [M+Na]+ calcd for C14H18FNO3SiNa, 318.0938; found, 318.0935.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7-Fluoroisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Horne, David A.; Jove, Richard; Lincoln, Christopher; Nam, Sangkil; Overman, Larry; Xie, Jun; US2013/225637; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

15362-40-0, name is 1-(2,6-Dichlorophenyl)-2-indolinone, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Quality Control of 1-(2,6-Dichlorophenyl)-2-indolinone

General procedure: A finely ground mixture of 5-substituted indole-3-carboxaldehyde (1 mmol) and active methylene compound (indolinone/oxindole/barbituric acid/1-(3-chlorophenyl)-3-methyl-2-pyrazolin-5-one)/2-trifluoromethylbenzaldehyde (1.2 mmol) was irradiated in microwave oven for 1-5 min. The solid product was washed with diethyl ether and purified by column chromatography to get pure products 2-5 and 11-28 except compound 3. Compound 3 was prepared by treatment of 5-substituted indole-3-carboxaldehyde with indolinone in ethanol-water in presence of NaOH (1.5 mmol).

The synthetic route of 15362-40-0 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Shaveta; Singh, Palwinder; European Journal of Medicinal Chemistry; vol. 74; (2014); p. 440 – 450;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 222036-66-0, name is 5-Aminoisoindolin-1-one, A new synthetic method of this compound is introduced below., Product Details of 222036-66-0

Example 461-(7-(3,4-Dimethoxyphenylamino)thiazolo[5,4-d]pyrimidin-5-yl)-N-(1-oxoisoindolin-5-yl)piperidine-3-carboxamideProcedure:To a solution of 1-(7-(3,4-dimethoxyphenylamino)thiazolo[5,4-d]pyrimidin-5-yl)piperidine-3-carboxylic acid (70 mg, 0.17 mmol) and 5-aminoisoindolin-1-one (25 mg, 0.17 mmol) in dichloromethane (15 mL) were added the solution of 1-methyl-1H-imidazole (55 mg, 0.68 mmol) and EDCI (129 mg, 0.68 mmol) in dichloromethane (5 mL), the reaction mixture was stirred at room temperature for 24 hours, the solvent was removed in vacuo, then methanol (5 mL) was added, the precipitate was collected by filtration and washed with methanol (3 mL) to afford 1-(7-(3,4-dimethoxyphenylamino)thiazolo[5,4-d]pyrimidin-5-yl)-N-(1-oxoisoindolin-5-yl)piperidine-3-carboxamide (48 mg, 51.8percent) as a brown solid. 1H NMR (300 MHz, DMSO): delta 10.29 (s, 1H), 9.64 (s, 1H), 8.84 (s, 1H), 8.38 (s, 1H), 7.96 (s, 1H), 7.64-7.53 (m, 3H), 7.33 (dd, 1H, J1=8.4 Hz, J2=1.8 Hz), 6.80 (brs, 1H), 4.81-4.63 (m, 2H), 4.33 (s, 2H), 3.68 (s, 3H), 3.59 (s, 3H), 3.14-2.92 (m, 2H), 2.65-2.60 (m, 1H), 2.04-2.00 (m, 1H), 1.81-1.69 (m, 2H), 1.49-1.45 (m, 1H). LC-MS: 545.9 [M+H]+, tR=1.42 min. HPLC: 99.69percent at 214 nm, 99.44percent at 254 nm, tR=4.87 min.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Hermann, Johannes Cornelius; Lowrie, JR., Lee Edwin; Lucas, Matthew C.; Luk, Kin-Chun Thomas; Padilla, Fernando; Wanner, Jutta; Xie, Wenwei; Zhang, Xiaohu; US2012/252777; (2012); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem