Category: indolines-derivatives

Related Products of 102359-00-2,Some common heterocyclic compound, 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, molecular formula is C9H7NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Reference Example 15 Production of 5-(5-phenyloxazol-2-yl)indolin-2-one To a solution of 2-oxoindoline-5-carboxylic acid (1.3 g, 7.3 mmol) in DMF (50 ml) was added iPr2NEt (3.8 ml, 22 mmol), HOBt (1.2 g, 8.8 mmol), WSCI (1.7 g, 8.8 mmol) and 2-amino-1-phenylethanone hydrochloride (1.3 g, 7.3 mmol). The reaction mixture was stirred for 2 h at room temperature. The mixture was poured into H2O and EtOAc. The resulting precipitate was removed by filtration, and the filtrate was separated. The organic layer was washed with sat. NaHCO3 solution, sat. NH4Cl solution and brine, and then dried over Na2SO4. The solvent was evaporated and the residue (0.73 g) was used for the next reaction without further purification. Sulfuric acid (5 ml) was added to the residue, and the mixture was heated for 2 h at 100 C. Ice was added, and the mixture was extracted with EtOAc. The organic layer was washed with H2O and brine, dried over Na2SO4 and evaporated. The residue was crystallized from EtOH to afford 5-(5-phenyloxazol-2-yl)indolin-2-one (0.27 g, 13%). 1H NMR (300 MHz, DMSO-d6) delta 10.68 (s, 1H), 7.96-7.91 (m, 2H), 7.84-7.80 (m, 2H), 7.77 (s, 1H), 7.52-7.47 (m, 2H), 7.37 (m, 1H), 6.97 (d, 1H, J=8.0 Hz), 3.60 (s, 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Oxoindoline-5-carboxylic Acid, its application will become more common.

Reference:
Patent; Tsuboi, Katsunori; Takanashi, Yosuke; Tojo, Shingo; Kodama, Tomohiro; Kubota, Katsumi; Kanai, Toshio; US2014/275076; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 2-(Bromomethyl)isoindoline-1,3-dione

General procedure: After the compound 1o (700 mg, 1.68 mmol) was dissolved in dichloromethane (15 mL), potassium hydroxide (278 mg, 4.22 mmol) and tetrabutylammonium bromide (60 mg) were added thereto, and iodomethyl (0.525 mL, 8.435 mmol) was slowly added thereto at room temperature. This solution was stirred for 10 hours at 25C. Cooling water was added to the reaction material, and the result was adjusted to pH 5 to 6 using a 2N aqueous hydrochloric acid solution. After the organic layer was separated and taken, the aqueous layer was extracted once with dichloromethane, and the organic layers were combined, dried with anhydrous magnesium sulfate, and concentrated under reduced pressure. The residue was separated using silica gel column chromatography (normal-hexane/ethyl acetate=4/1) to give a pure target compound 1z (574 mg, 79%). 1H-NMR (300 MHz, CDCl3) delta 0.97 (s, 9H), 1.49 (s, 3H), 2.28 (s, 3H), 2.71 (s, 3H), 3.65 (s, 3H), 3.75 (s, 3H), 5.07 (s, 1H), 7.24 (m, 1H), 7.43 (m, 3H); MS (EI, m/e)=428 (M+). A target compound 19a (780 mg, 94%) was obtained by reacting the compound 1o (600 mg, 1.446 mmol) inthe same manner as in Step 1 of Example 1, except that N-(bromomethyl)phthalimide (787 mg, 3.0 equivalents) andpotassium hydroxide (400 mg, 5 equivalents) were used instead of iodomethyl and the stirring was carried out for 7hours at 20C. 1H-NMR (300 MHz, CDCl3) delta 0.98 (s, 9H), 1.46 (s, 3H), 2.45 (s, 3H), 2.65 (s, 3H), 3.63 (s, 3H), 5.04 (s, 1H),6.08 (AB-q, 2H), 7.24 (m, 2H), 7.37 (m, 2H), 7.73 (m, 2H), 7.68 (m, 2H); MS (EI, m/e)=573 (M+).

According to the analysis of related databases, 5332-26-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Korea Research Institute of Chemical Technology; SON, Jong Chan; KIM, Bong Jin; KIM, Jae Hak; LEE, Ill Young; YUN, Chang Soo; LEE, Sang Ho; LEE, Chong Kgo; (98 pag.)EP2781519; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 264916-06-5, name is tert-Butyl 5-aminoisoindoline-2-carboxylate, A new synthetic method of this compound is introduced below., Computed Properties of C13H18N2O2

(2) 2-tert-Butoxycarbonyl-5-(2-nitrophenylamino)isoindoline A dimethylformamide (10 ml) suspension of 5-amino-2-tert-butoxycarbonylisoindoline (5.3 g, 22.6 mmol), o-fluoronitrobenzene (7.15 ml, 22.6 mmol) and potassium carbonate (3.12 g, 22.6 mmol) was stirred at 145 C. for 2 hours under nitrogen atmosphere. After cooling, the reaction mixture was diluted with ethyl acetate and washed with water. After drying over anhydrous magnesium sulfate, the mixture was concentrated under reduced pressure. The residue was purified by a silica gel column chromatography to give 2-tert-butoxycarbonyl-5-(2-nitrophenylamino)isoindoline (4.9 g, 61%) as an oil. 1H-NMR(CDCl3) delta: 1.53(9H, s), 4.67(2H, s), 4.70(2H, s), 6.76(1H, t, J=6.8 Hz), 7.15-7.41(5H, m), 8.20(1H, d, J=8.8 Hz), 9.47(1H, bs).

The synthetic route of 264916-06-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Oi, Satoru; Suzuki, Nobuhiro; Matsumoto, Takahiro; US2003/149027; (2003); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 59-48-3, name is Indolin-2-one, A new synthetic method of this compound is introduced below., HPLC of Formula: C8H7NO

Preparation of 5-Nitro-2-indolinone The 2-indolinone (6.5 g) was dissolved in 25 mL of concentrated sulfuric acid and the mixture maintained at -10-15 C. while 2.1 mL of fuming nitric acid was added dropwise. After the addition of the nitric acid the reaction mixture was stirred at 0 C. for 0.5 hr and poured into ice-water. The precipitate was collected by filtration,. washed with water and crystallized from 50% of acetic acid. The final crystal was then filtered, washed with water and dried under vacuum to give 6.3 g (70%) of 5-nitro-2-indolinone.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Sugen, Inc.; US6316635; (2001); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 3484-35-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 3484-35-3 name is 5-Methylindolin-2-one, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: A reaction mixture of compound 19-21 (2.35 mmol),compound 14-18 (2.14 mmol) and 2 drops of piperidine was stirred at RT for 3 h. The precipitate was filtered off and dried. The crude compound was purified by column chromatography using ethyl acetate in dichloromethane (13%) to afford the desired products (4, 22-32).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Methylindolin-2-one, and friends who are interested can also refer to it.

Reference:
Article; Dai, Hou-Ling; Gao, Li-Xin; Yang, Ying; Li, Jing-Ya; Cheng, Jia-Gao; Li, Jia; Wen, Ren; Peng, Yan-Qing; Zheng, Jian-Bin; Bioorganic and Medicinal Chemistry Letters; vol. 22; 24; (2012); p. 7440 – 7443;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 99365-40-9, name is 6-Bromoindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C8H6BrNO

Sodium bis(trimethylsilyl)amide (1.0M in tetrahydrofuran, 9.40 mL, 9.40 mmol) was added dropwise to a stirred suspension of 6-bromoindolin-2-one (preparation 1, 0.40 g, 1.89 mmol) in tetrahydrofuran (4 mL) at -78C. The mixture was stirred for 30 minutes, then 2-chloro-N-(2-chloroethyl)-N-methylethanamine hydrochloride (0.36 g, 1.89 mmol) was added and the mixture was warmed to room temperature. After stirring overnight, water was added to the reaction and the mixture was extracted with ethyl acetate. The organic layer was dried (MgSO4) and evaporated. Purification of the residue by reverse phase chromatography (0% CH3CN in H2O to 100% CH3CN in H2O) gave the title compound as a yellow oil (0.17 g, 31%). LRMS (m/z): 295/297 (M+1)+. 1H-NMR delta (DMSO-d6): 1.68-1.86 (m, 4H), 2.51-2.62 (m, 4H), 2.80-2.87 (s, 3H), 7.00 (s, 1H), 7.14 (d, J=6.0 Hz, 1H), 7.41 (d, J=6.0 Hz, 1H), 8.28 (brs, 1H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 99365-40-9.

Reference:
Patent; Laboratorios Almirall, S.A.; EP2108641; (2009); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 102359-00-2, A common heterocyclic compound, 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, molecular formula is C9H7NO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Into a 10-mL round-bottom flask was placed 2-oxo-2,3-dihydro-1H-indole-5- carboxylic acid (48 mg, 0.27 mmol, 2.00 equiv), 1-hydroxybenzotrizole (40 mg, 1.26 mmol, 2.00 equiv), triethylamine (50 mg, 0.49 mmol, 4.00 equiv), N-[4-[(2S,4S)-4- amino-2-methylpiperidine-1-sulfonyl]phenyl]acetamide (40 mg, 0.13 mmol, 1.00 equiv), and dichloromethane (4 mL). N-(3-dimethylaminopropyl)-N?-ethylcarbodiimide hydrochloride (56 mg, 0.29 mmol, 2.00 equiv) was added batchwise at 0-5oC. The resulting solution was stirred for 16 hours at 25oC. The mixture was then washed with 3×5 mL of brine and the organic layer concentrated under vacuum. The crude product was purified by Prep-HPLC with the following conditions (2-Waters 2767-2(HPLC- 08)): Column, Xbridge Shield RP 18, 5um, 19*150mm; mobile phase, water with 50mmol NH4HCO3and CH3CN (10.0% CH3CN up to 28.0% in 2 min, up to 46.0% in 10 min,up to 100.0% in 1 min, down to 10.0% in 1 min); Detector, UV 254 nm. This resulted in 2.6 mg (4%) of N-[(2S,4S)-1-[(4-acetamidobenzene)sulfonyl]-2- methylpiperidin-4-yl]-2-oxo-2,3-dihydro-1H-indole-5-carboxamide as a white solid

The synthetic route of 102359-00-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Epizyme, Inc.; Poley, Megan Allen Clunan; Kunz, Kevin Wayne; Mills, James Edward John; Mitchell, Lona Helen; munckhof, Michael John; Harvey, Darren Martin; (303 pag.)KR2017/45749; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 118289-55-7, COA of Formula: C10H9Cl2NO

General procedure: Equimolar mixture of 6-chloro-5-(2-chloroethyl)-1,3-dihydro-2H-indol-2-one 1 (1.00mol) and the carbonyl compound (4i-x) (1.00mol) was stirred at RT in methanol (10mL) for 2h in presence of potassium carbonate (1.20mol). After completion, the reaction mass was filtered to remove inorganic salt, added methanol (10-20mL) and activated charcoal to the filtrate and stirred for 1hr. The crude product was filtered to remove charcoal, methanol was evaporated and cooled to 0-5C to get crude solid. Recrystallized using aqueous ethanol or methanol (Yield 60-70%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Meti, Gangadhar Y.; Kamble, Atulkumar A.; Kamble, Ravindra R.; Somagond, Shilpa M.; Devarajegowda; Kumari, Sandhya; Kalthur, Guruprasad; Adiga, Satish K.; European Journal of Medicinal Chemistry; vol. 121; (2016); p. 221 – 231;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 99365-40-9, name is 6-Bromoindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 99365-40-9, Product Details of 99365-40-9

To a warm, stirred solution of 6-bromo-2-oxindole (4 g, 26.3 mmol) dissolved in 60 mL toluene and 60 mL ethanol was added tetrakis(triphenylphosphine)palladium(0) (2.3 g, 1.9 mmol) followed by 2M aqueous sodium carbonate (50 mL, 100 mmol) and thiophene-2-boronic acid (4.38 g, 34.2 mmol) in three portions over 1.5 hours. The mixture was stirred at 100 C. in an oil bath for 12 hours. The mixture was then diluted with ethyl acetate (400 mL) and washed with saturated sodium bicarbonate (200 mL), water (200 mL) and brine (200 mL). The organic layer was separated, dried over anhydrous magnesium sulfate and concentrated to give 2.53 g (42%) of 6-thiophen-2-yl-1,3-dihydro-indol-2-one a tan solid. 1H NMR (360 MHz, DMSO-d6) delta 10.42 (s, 1H, NH), 7.50 (dd, J=0.83 and 4.97 Hz, 1H, Ar-H), 7.43 (dd, J=0.89 and 3.52 Hz, 1H, Ar-H), 7.21 (s, 2H, Ar-H), 7.10 (dd, J=3.31 and 4.82 Hz, 1H, Ar-H), 7.01 (s, 1H, Ar-H), 3.47 (s, 2H, CH2CO). MS EI: 215 [M]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Bromoindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Sugen, Inc.; US6689806; (2004); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 21857-45-4, name is 5-Methoxyindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Safety of 5-Methoxyindoline

12 g of compound obtained in the preceding step are heated at 140 C. for 3 h in HBr (48%, 200 ml). After cooling to AT, filtering, the filtrate is concentrated dry. The residue is washed with acetone and dried. 14.8 g of desired product are obtained and used as such.

The synthetic route of 21857-45-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CEREP; US2009/233910; (2009); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem