Category: indolines-derivatives

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 603-62-3, name is 3-Nitrophthalimide, A new synthetic method of this compound is introduced below., Recommanded Product: 3-Nitrophthalimide

3-Nitrophthalimide (LOOGR) was taken into a beaker and dissolved using 200ML of dimethylformamide and 300ML of methanol. The solution was transferred into a 1L hydrogenation kettle and 20gr of Raney nickel was charged into the kettle. Hydrogenation was carried out initially at 20-40psi and 25-30C until the exothermic nature was over. Hydrogenation was further continued at 40-60psi pressure and 40-50C. After checking the completion of reaction by TLC catalyst was removed by filtration and the solvents distilled off from the reaction mixture at 50-60C. The residue thus obtained was suspended in water (500ML) and filtered off to get a bright yellow crystalline compound of 3-aminophthalimide (78gr, 92.5%). Melting point: 263-4C

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; NATCO PHARMA LIMITED; VENKAIAH CHOWDARY, Nannapaneni; WO2004/43919; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 7699-18-5,Some common heterocyclic compound, 7699-18-5, name is 5-Methoxyindolin-2-one, molecular formula is C9H9NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution OF NAHMDS (1 M THF solution) (800 ml, 0.8 mol), the solution OF 5-METHOXY-1, 3- dihydro-indol-2-one (26.1 g, 0.16 mol) in THF (160 ml) and benzyl-bis- (2-chloro-ethyl)-amine (47.3 g, 0.18 mol) in THF (176 ml) are added AT-78?C. The reaction mixture is stirred for 15 h at room temperature, quenched with saturated ammonium chloride and ice-water and extracted with ethyl acetate. The combined extracts are washed with brine, dried over sodium sulphate and evaporated down. Ethyl ether is added to the residue to give the powder, which is filtrated. Yield: 39 % Rf=0.25 (N-hexane: AcOEt = 1:1). 1H-NMR (400MHz, CDCl3) delta: 1.81-1.99 (m, 2H), 2.00-2.04 (m, 2H), 2.66-2.72 (m, 2H), 2.90-2.96 (m, 2H), 3.67 (s, 2H), 3.77 (s, 3H), 6.71-6.81 (m, 2H), 7.00 (s, 1H), 7.25-7.40 (m, 5H), 8.32 (brs, 1H)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Methoxyindolin-2-one, its application will become more common.

Reference:
Patent; NOVARTIS AG; NOVARTIS PHARMA GMBH; WO2004/76455; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 611-09-6, name is 5-Nitroindoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 611-09-6, Application In Synthesis of 5-Nitroindoline-2,3-dione

Mg(ClO4)2 (0.1 g) was added to a mixture of isatin (2 mmol), and dimedone (4 mmol) in aqueousethanol solution (50%, v/v, 5 mL), and the resulting mixture was stirred at 80C for 10-12 h. Upon completion of the reaction (TLC, Ethyl acetate/Petroleum ether = 1:4), the mixture was allowedto cool to room temperature. The resulting solid was filtered and washed successively with water(2 30 mL) and cold aqueous ethanol (2 1 mL) to afford a crude product, which was recrystallizedfrom EtOH to afford the pure product 3. Some insolubility could be observed in the refluxing ethanolduring the recrystallization process, which should be filtered when hot.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Chen, Chunfeng; Lv, Chunlei; Liang, Jianfeng; Jin, Jianqing; Wang, Lijun; Wu, Chunlei; Shen, Runpu; Molecules; vol. 22; 8; (2017);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 1168150-46-6,Some common heterocyclic compound, 1168150-46-6, name is (E)-Methyl 3-(methoxy(phenyl)methylene)-2-oxoindoline-6-carboxylate, molecular formula is C18H15NO4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of intermediate (3a, 3b, 6a, 6b, 10a, 10b, 11a-d, and14a-g, 1.5 mmol) and methyl (E)-3-(methoxy(phenyl)methylene)-2-oxoindoline-6-carboxylate (1.5 mmol) in methanol (10 mL) wasstirred under reflux for 5-10 h. When TLC showed the completionof the reaction, the solution was cooled to room temperature. Theprecipitate was filtered off to give a crude product, which wasrecrystallized from methanol to provide the target compounds.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (E)-Methyl 3-(methoxy(phenyl)methylene)-2-oxoindoline-6-carboxylate, its application will become more common.

Reference:
Article; Qin, Mingze; Tian, Ye; Sun, Xiaoqing; Yu, Simiao; Xia, Juanjuan; Gong, Ping; Zhang, Haotian; Zhao, Yanfang; European Journal of Medicinal Chemistry; vol. 139; (2017); p. 492 – 502;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Product Details of 169037-23-4

Preparation of 3-hydroxy-5-trifluoromethoxy-3-(nitromethyl)indolin-2-one 5-trifluoromethoxy isatin ((0.115 g) and nitromethane (0.1 ml) were added to water and the reaction mixture was vigorously stirred at a temperature of 30 C. for 20 minutes. The obtained product was extracted with ethyl acetate and the solvent was removed to give pure product.

The synthetic route of 169037-23-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; RAO, Mandapati Mohan; PRATHIMA, Parvathaneni Sai; US2013/345438; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 324-03-8, name is 6-Fluoroindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 6-Fluoroindoline-2,3-dione

Add 11.33g NaNO3 and 100mL H2SO4 to a 500mL reaction flask.With stirring, the temperature of the ice bath was lowered to 0 C. Take 20.00g of compound 1-1,Dissolved in 120mL H2SO4,Slowly add the 1-1 H2SO4 solution to the reaction flask,After dripping, the reaction was held at 0 C for 1 hour, and then the reaction solution was poured into 1 L of ice water.After stirring for 0.5 hours, it was filtered and the filter cake was washed with water until neutral.The filter cake was washed with 80 mL of EtOH / H2O (7: 3) for 0.5 hours, filtered,The filter cake was dried to obtain 18.83 g of a crude product of 2-1.Yield: 74%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 324-03-8.

Reference:
Patent; Chinese Academy Of Sciences Shanghai Organic Chemistry Institute; Ma Dawei; Wang Kailiang; Xia Shanghua; Li Zheng; Zhao Jinlong; Li Ying; (82 pag.)CN110642874; (2020); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 20870-79-5, These common heterocyclic compound, 20870-79-5, name is 5-Nitroindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a suspension of 5-nitro-3-substituted-2-oxindole derivatives 8-12 or commercially available 5-nitroindolin-2-one (1 mmol) in amixture of ethanol and water (10 mL, 4:1 v/v) was added iron powder (560 mg.10 mmol,10 equiv.) and NH4Cl (134 mg, 2.5 mmol,2.5 equiv.). The mixture was refluxed for 2 h, cooled and filteredthrough Celite. The filtrate was diluted with water (5 mL) andextracted with dichloromethane (3 x 10 mL). The combinedorganic layers were washed with water (10 mL) and brine (10 mL),dried over anhydrous Na2SO4 and concentrated under reduced pressure. The crude residue was purified by crystallization withethyl ether.

The synthetic route of 20870-79-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Romagnoli, Romeo; Baraldi, Pier Giovanni; Prencipe, Filippo; Oliva, Paola; Baraldi, Stefania; Salvador, Maria Kimatrai; Lopez-Cara, Luisa Carlota; Bortolozzi, Roberta; Mattiuzzo, Elena; Basso, Giuseppe; Viola, Giampietro; European Journal of Medicinal Chemistry; vol. 134; (2017); p. 258 – 270;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 6941-75-9, name is 5-Bromoisoindoline-1,3-dione, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C8H4BrNO2

280 ml of 1M Borane-THF complex was added dropwise to a stirred solution of 4-bromophthalimide (20.85 g; 92.2 mmol) in anhydrous THF (200 ml) at 0 C. then heated at reflux overnight. The reaction was cooled to 0 C. then treated cautiously with methanol (100 ml) followed by 2M HCl (100 ml) then heated at reflux for 3 hours. The reaction mixture was cooled and the organics evaporated. The aqueous was diluted with water (100 ml) the extracted with DCM (×3). The aqueous was basified with 2M NaOH then extracted with DCM (×3). The combined DCM extracts were dried (MgSO4), filtered and evaporated to give 6.99 g of 5-bromo-2,3-dihydro-1H-isoindole as a dark brown gummy solid. 1H NMR (DMSO-d6) 7.45 (1H, s), 7.36 (1H, d), 7.20 (1H, d), 4.05 (4H, s).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 6941-75-9, its application will become more common.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; US2010/152184; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7477-63-6, name is 7-Chloroisatin, A new synthetic method of this compound is introduced below., Formula: C8H4ClNO2

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 °C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 667463-64-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 667463-64-1, name is 6-Bromo-1-methylindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Step 1: To a 250 mL flask equipped with a silicone oil bubbler was added commercially available isatin (7.7 g, 50 mmol) and anhydrous DMF (80 mL). the mixture was cooled down to 0 oC. To this solution was added NaH (1.32 g, 55 mmol), followed by the addition of CH3I in 15 min. Upon completion of the reaction (monitored by TLC), the mixture was diluted with saturated NH4Cl solution and extracted with ethyl acetate. The organic layer was washed with water, dried over Na2SO4, filtered, and concentrated to yield the crude N-methylindoline-2, 3-dione, which was used directly in the next step. Step 2: The N-methylindoline-2, 3-dione (7.58 g, 47 mmol) was refluxed in NH2·NH2-H2O ( 35 %) for 1h. Then the mixture was cooled to rt. The crude product was extracted with ethyl acetate. The combined organic layer was then dried over Na2SO4, purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 10:1). 1-Methylindolin-2-one was obtained as a pink solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Bromo-1-methylindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Zhao, Jian-bo; Ren, Xinfeng; Zheng, Bu-quan; Ji, Jian; Qiu, Zi-bin; Li, Ya; Journal of Fluorine Chemistry; vol. 215; (2018); p. 44 – 51;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem