Category: indolines-derivatives

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 24566-80-1, name is 2-(10-Bromodecyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., Quality Control of 2-(10-Bromodecyl)isoindoline-1,3-dione

A 99.0 g amount of 2-(10-bromodecyl)-1H-isoindole-1,3(2H)-dione (prepared as described above) was dissolved in 300 ml of warm N,N-dimethylformamide with stirring. This solution was added to a stirred solution of 1H-imidazole, sodium salt (prepared by stirring a mixture of 20 g of imidazole and 14.0 g 50% sodium hydride in 500 ml of N,N-dimethylformamide at room temperature for 48 hours). The resulting mixture was heated on a steam bath for 14 hours, then taken to dryness in vacuo. The residue was partitioned between 500 ml of dichloromethane and 250 ml of water. The organic layer was washed with 250 ml of water, dried over magnesium sulfate and filter. The filtrate was evaporated in vacuo and gave 85.4 g of 2[10-(1H-imidazol-1-yl)decyl]-1H-isoindole-1,3(2H)dione as an oil which solidified on standing at room temperature.

The synthetic route of 24566-80-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; American Cyanamid Company; US4684654; (1987); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1336963-95-1, name is 6-Bromo-7-fluoroindoline-2,3-dione, A new synthetic method of this compound is introduced below., Product Details of 1336963-95-1

To a solution of 6-bromo-7-fluoroindoline-2,3-dione (1.41 g, 5.80 mmol) in 2 N NaOH (15 mL) was added H202 (30%, 3 mL) at 0C, the mixture was stirred at 0C for 30 mm. After stirring at rt for 16 h, the mixture was poured into ice water, the solution was acidified with Conc. HC1, the precipitate was filtered and dried in the air to afford the desired product as a white solid (1.2 g, 89% yield)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ARAXES PHARMA LLC; LI, Liansheng; FENG, Jun; LONG, Yun Oliver; LIU, Yuan; WU, Tao; REN, Pingda; LIU, Yi; (246 pag.)WO2017/87528; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 20870-79-5, name is 5-Nitroindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 20870-79-5, Computed Properties of C8H6N2O3

To the mixture of 5-nitro-2-oxindole 2c (0.5g, 0.003mol) and zinc dust (0.91g, 0.014mol) in ethanol (5mL) 2mL of concentrated hydrochloric acid were rapidly added with intensive stirring. After 30min the reaction was terminated by addition of cold water (3mL). Then solid sodium bicarbonate was carefully added to the reaction mixture to adjust pH 8. Solvent was removed in vacuum and crude product was purified by filtering through silica gel pad (eluent MeOH:EtOAc 1:1). After eluent evaporation in vacuum the 5-amino-2-oxindole 2d was obtained as gray powder with yield 79% (0.35g) and used without additional purification. Mp (exp)=190-195C, mp lit34=212-214C). dH (400MHz, DMSO-d6): 3.31 (2H, s, CH2), 4.64, (1H, br s, NH2) 6.39 (1H, dd, J 8.1, 1.3, CHAr), 6.51 (1H, s, CHAr), 6.53 (1H, d, J 7.6, CHAr), 9.99 (1H, s, NH).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Lozinskaya, Natalia A.; Babkov, Denis A.; Zaryanova, Ekaterina V.; Bezsonova, Elena N.; Efremov, Alexander M.; Tsymlyakov, Michael D.; Anikina, Lada V.; Zakharyascheva, Olga Yu.; Borisov, Alexander V.; Perfilova, Valentina N.; Tyurenkov, Ivan N.; Proskurnina, Marina V.; Spasov, Alexander A.; Bioorganic and Medicinal Chemistry; vol. 27; 9; (2019); p. 1804 – 1817;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 18711-15-4,Some common heterocyclic compound, 18711-15-4, name is 4,6-Dichloroisatin, molecular formula is C8H3Cl2NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(i) 3-Hydroxy-4,6-dichloro-1,3-dihydro-3-(benzofuran-5-yl)indole-2-one 2.25 g of magnesium for a Grignard reaction in 15 ml of anhydrous THF are placed in a round-bottomed flask equipped with a mechanical stirrer, and under a stream of nitrogen. A mixture of 13.6 g of 5-bromobenzofuran in 35 ml of anhydrous THF is then added. The mixture is stirred for one hour, followed by addition of a solution of 5 g of 4,6-dichloro-1H-indole-2,3-dione in 50 ml of anhydrous THF. The mixture is stirred at room temperature for 4 hours 30 minutes. Water is added and the resulting mixture is extracted with ethyl acetate. The organic phase is separated out, dried over Na2SO4, filtered and evaporated under vacuum. The residue is taken up in ethyl acetate and washed with 1N sodium hydroxide solution. The organic phase is dried over Na2SO4, filtered and evaporated under vacuum. The solid is taken up in ethyl ether and filtered off. 4.2 g of expected product are obtained.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4,6-Dichloroisatin, its application will become more common.

Reference:
Patent; SANOFI; US2011/312972; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 3335-98-6, name is 1-Phenyloxindole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C14H11NO

General procedure: The appropriate compound 2 (10 mmol) was dissolved inmethanol (100 mL) and treated with the equivalent of the appropriatealdehyde 1 and piperidine (1 mL). For compounds 39, 41 and42 the yield was much lower (5%), and an improvement (15-20%)was obtained by replacing piperidine with 33% NH4OHThe reaction mixture was refluxed for 5-10 h, except for compounds39-42 which required a longer reflux time (16-24 h; theprogress of the reaction was followed by TLC). The precipitate,formed on cooling, was collected by filtration.Compounds 39e41 were purified by column chromatographywith petroleum ether/acetone as the eluent. Most of the crudeproducts were crystallized from methanol, except 27 (acetone/petroleumether), 34, 43-48, 50-52 (ethanol) and 42, 49 (toluene). Inthe case of compound 10, the two E/Z isomers were isolated byfractional crystallization from methanol.

The synthetic route of 1-Phenyloxindole has been constantly updated, and we look forward to future research findings.

Reference:
Article; Morigi, Rita; Locatelli, Alessandra; Leoni, Alberto; Rambaldi, Mirella; Bortolozzi, Roberta; Mattiuzzo, Elena; Ronca, Roberto; Maccarinelli, Federica; Hamel, Ernest; Bai, Ruoli; Brancale, Andrea; Viola, Giampietro; European Journal of Medicinal Chemistry; vol. 166; (2019); p. 514 – 530;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 7477-63-6, name is 7-Chloroisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7477-63-6, category: indolines-derivatives

General procedure: For compound 3, arenesulfenyl chloride (5 mmol) was added dropwise to a solution of isatin or isatin derivatives (5 mmol) and triethylamine (5 mmol) in N,N-dimethylformamide (DMF, 5 mL) at room temperature. Stirring was continued for an additional 30 min and then the mixture was poured into ice water (20 mL). The yellow precipitates were collected by filtration and recrystallized from ethanol to give pure 3a-3m.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Shang, Jian-Li; Guo, Hui; Li, Zai-Shun; Ren, Biao; Li, Zheng-Ming; Dai, Huan-Qin; Zhang, Li-Xin; Wang, Jian-Guo; Bioorganic and Medicinal Chemistry Letters; vol. 23; 3; (2013); p. 724 – 727;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 611-09-6 as follows. name: 5-Nitroindoline-2,3-dione

General procedure: To a solution of L-proline-melamine complex (3 mol%) in DMSO (2 mL) was added dimedone 0.025 mg (0.178 mmol), malononitrile (1 equiv) and benzaldehyde / isatin (1 equiv) and stirred at room temperature for 1-20 min. After completion of the reaction (monitored by TLC), ethyl acetate was added stirring and continued for another 5 min. The precipitate formed was filtered. Evaporation of solvent gave the crude product which was recrystallized using ethanol to give the pure compound.

According to the analysis of related databases, 611-09-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Nagaraju, Sakkani; Paplal, Banoth; Sathish, Kota; Giri, Santanab; Kashinath, Dhurke; Tetrahedron Letters; vol. 58; 44; (2017); p. 4200 – 4204;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 480-91-1, These common heterocyclic compound, 480-91-1, name is Isoindolin-1-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Isoindolin-1-one (200 mg, 1.50mmol) was dissolved in super-dry DMSO (4 mL), and Cs2CO3 (1215 mg, 3.75 mmol), CuI (58 mg, 0.30mmol) and N1,N2-dimethylethane-1,2-diamine (27 mg, 33 muL, 0.30 mmol) were added to the solution.The resulting mixture was stirred at room temperature for 10 min, after which iodobenzene (2.25mmol) was added. Then the mixture was heated to 120 C. When TLC showed that isoindolin-1-onehad been fully converted, the reaction was stopped. The mixture was extracted with ethyl acetate (20mL) and H2O (10 mL). The water phase was re-extracted with ethyl acetate (20 mL). The organic layerwas combined and washed with brine (10 mL). Then the solution was dried over anhydrous MgSO4,filtered and concentrated, and the crude residue was purified by flash chromatography over silica gelusing CH2Cl2/CH3OH as the gradient elution to afford the title compounds.

Statistics shows that Isoindolin-1-one is playing an increasingly important role. we look forward to future research findings about 480-91-1.

Reference:
Article; Wang, Yixuan; Wang, Huiqiang; Jiang, Xinbei; Jiang, Zhi; Guo, Tingting; Ji, Xingyue; Li, Yanping; Li, Yuhuan; Li, Zhuorong; Molecules; vol. 24; 5; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 32692-19-6,Some common heterocyclic compound, 32692-19-6, name is 5-Nitroindoline, molecular formula is C8H8N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: We described the synthesis of the compound 1 (Table 2) to illustrate the general procedure for TFA accelerated Petasis three-component reaction. The descriptions of the preparations of all reported compounds are in the Supporting information section. To a magnetically stirred mixture of 5-nitroindoline (0.164 g, 1.0 mmol), 4-tolyboronic acid (0.135 g, 1.0 mmol), and glyoxylic acid monohydrate (0.092 g, 1.0 mmol) in CH2Cl2 (5 ml) was added TFA (20 mul). The mixture was stirred at room temperature for 4 h. After the completion of the reaction (TLC monitoring), half of the solvent was evaporated by means of a rotovap. The resulting solid was filtered through a sintered glass funnel. The collected solid was thoroughly washed with petroleum ether and a small amount of ice water (5 ml), and then dried in vacuo at room temperature for 24 h to afford 0.26 g (83.3 %) of 2-(5-nitroindolin-1-yl)-2-(p-tolyl) acetic acid as a light yellow solid.

The synthetic route of 32692-19-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhang, Jing; Yun, Fan; Xie, Rui; Cheng, Chunhui; Chen, Guangyao; Li, Jingxuan; Tang, Pingwah; Yuan, Qipeng; Tetrahedron Letters; vol. 57; 35; (2016); p. 3916 – 3919;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 6872-06-6, A common heterocyclic compound, 6872-06-6, name is 2-Methylindoline, molecular formula is C9H11N, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 7Synthesis of 5-((2,3-dihydrobenzo[b][1,4]dioxin-6-yl)sulfonyl)-2-methyl-1-(phenylsulfonyl)indolineReagents MW Reagent/raw material (g/mole) Quantity moles 2-methylindoline 133.20 1 g 7.5 mmol benzenesulfonyl chloride 176.62 1.98 g 11 mmol 2-methyl-1- 273.35 0.76 g 2.77 mmol (phenylsulfonyl)indoline 2,3- 234.66 0.5 g 2.13 mmol dihydrobenzo[b][1,4]dioxine- 6-sulfonyl chloride Aluminium chloride 133.3 0.369 g 2.77 mmol Step 1: 2-methylindoline was dissolved in 5 mL dry pyridine, and benzenesulfonyl chloride was dropped in. The reaction was stirred for 2 hours at room temperature and an intense red color developed. When complete as determined by HPLC using the protocol in Example 1 above, as well as by LCMS, the crude reaction was poured into 100 mL cold 1M KHSO4, and extracted twice with 50 mL CH2Cl2. The organic phase was dried, evaporated and purified by CombiFlash to provide 2 grams of 100% pure product (97% yield).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Becker, Oren M.; Shitrit, Alina; Schutz, Nili; Ben-Zeev, Efrat; Yacovan, Avihai; Ozeri, Rachel; Kehat, Tzofit; Mirilashvili, Sima; Aizikovich, Alex; Sherman, Daniel; Behar, Vered; Kashtan, Osnat; US2012/108631; (2012); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem