Category: indolines-derivatives

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 114041-16-6, name is 5,6-Dimethoxyisoindoline, A new synthetic method of this compound is introduced below., COA of Formula: C10H13NO2

General procedure: Compound 8 (70.6 mg, 0.24 mmol) and 5,6-dimethoxyisoindoline(68.5 mg, 0.38 mmol) were dissolved in CH3CN (30 mL), followed by addition of K2CO3 (138.8 mg, 1.00 mmol). The mixture was heated under reflux and stirred at 90 C for 6 h. After cooling and filtration, the solvent was removed under reduced pressure. The residue was purified by silica gel chromatography (petroleum ether/ethyl acetate/triethyamine) = 10:10:1, v/v/v) to afford 13(56.8 mg, 59%)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 59-48-3, name is Indolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 59-48-3

AlCl3 (303 g, 2.27 mol) is placed in a 3-necked flask fitted with a thermometer and a dropping funnel. While stirring DMF (50 ml) is added dropwise and the temperature rises to about 60. The mixture is cooled down to 45, and oxindole (33 g, 0.25 mol) is added in 3 portions. After an additional 10 minutes, acetyl chloride (36 ml, 0.5 mol) is added. The mixture is stirred for an additional 30 minutes at room temperature. The mixture is poured onto ice (3000 g). This results in the formation of a solid which is filtered off, washed first with water and then with cold methanol (1000 ml), and then dried to give 5-acetyloxindole.

According to the analysis of related databases, 59-48-3, the application of this compound in the production field has become more and more popular.

Reference of 32692-19-6,Some common heterocyclic compound, 32692-19-6, name is 5-Nitroindoline, molecular formula is C8H8N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: We described the synthesis of the compound 1 (Table 2) to illustrate the general procedure for TFA accelerated Petasis three-component reaction. The descriptions of the preparations of all reported compounds are in the Supporting information section. To a magnetically stirred mixture of 5-nitroindoline (0.164 g, 1.0 mmol), 4-tolyboronic acid (0.135 g, 1.0 mmol), and glyoxylic acid monohydrate (0.092 g, 1.0 mmol) in CH2Cl2 (5 ml) was added TFA (20 mul). The mixture was stirred at room temperature for 4 h. After the completion of the reaction (TLC monitoring), half of the solvent was evaporated by means of a rotovap. The resulting solid was filtered through a sintered glass funnel. The collected solid was thoroughly washed with petroleum ether and a small amount of ice water (5 ml), and then dried in vacuo at room temperature for 24 h to afford 0.26 g (83.3 %) of 2-(5-nitroindolin-1-yl)-2-(p-tolyl) acetic acid as a light yellow solid.

The synthetic route of 32692-19-6 has been constantly updated, and we look forward to future research findings.

Reference of 6326-79-0, The chemical industry reduces the impact on the environment during synthesis 6326-79-0, name is 6-Bromoisatin, I believe this compound will play a more active role in future production and life.

General procedure: TiCl4 (0.7 mL, 6 mmol)was added to a stirred suspension of Zn powder (0.78 g, 12 mmol) in freshlydistilled anhydrous THF (15 mL) at room temperature (rt) under a dry N2atmosphere. After completion of the addition, the mixture was refluxed for 2 h.The suspension of the low-valent titanium reagent thus-formed was cooled tort. A solution of isatin or its derivatives 1 or 3 (2 mmol) in THF (10 mL) wasadded dropwise. The mixture was stirred at room temperature for about 5 minunder N2. After this period, the thin layer chromatography (TLC) analysis of themixture showed the reaction completed. The reaction mixture was quenchedwith 3% HCl (15 mL) and extracted with CHCl3 (3 50 mL). The combinedextracts were washed with water (3 50 mL) and dried over anhydrousNa2SO4. After evaporation of the solvent under reduced pressure, the crudeproduct was purified by column chromatography (petroleum ether/ethylacetate = 5:1) to give the pure products 2 or 4.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Bromoisatin, other downstream synthetic routes, hurry up and to see.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 317-20-4, name is 7-Fluoroisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. category: indolines-derivatives

N,N-dimethylformamide (540.0 mL, 6980 mmol, 100 mass%) was added to a 2-L ChemGlass reactor equipped with a mechanical agitator, a temperature probe, and a cooling/heating circulator. Next, 7-fluoroindoline-2,3-dione (135.0 g, 817.6 mmol, 100 mass%) was added at 25 C and dissolved to form a dark red solution. The charging ports and the beaker that contained the 7-fluoroindoline-2,3-dione were washed with N,N-dimethylformamide (135.0 mL, 1750 mmol, 100 mass%) and the rinse solution was poured into the reactor. Next, cesium carbonate 60-80 mesh (203.66 g, 625.05 mmol, 100 mass%) was added portion-wise to the reaction mixture. The addition was exothermic and the temperature of the reaction mixture increased from 20 to 25.5 C. The color of the reaction mixture changed from a dark red solution to a black solution. The reactor jacket temperature was set to 0 C. Next, iodomethane (56.5 mL, 907 mmol, 100 mass%) was added slowly via an additional funnel at ambient temperature, (iodomethane temperature) while maintaining the batch temperature at less than 30 C. Upon stirring, the reaction was exothermic, reaching a temperature of 29.3 C. The batch temperature decreased to 26.3 C after 85% of iodomethane was added, and the reaction mixture turned from black to an orange. After the addition of the iodomethane was completed, the jacket temperature was raised to 25.5 C. The reaction mixture was stirred at 25 C for 2 hrs. The reddish orange-colored reaction mixture was transferred to a 1 L Erlenmeyer flask. The reaction mixture was filtered through a ceramic Buchner funnel with a No.1 Whatman filter paper to remove solid CS2CO3 and other solid by-products. In addition to a light-colored powder, there were yellow to brown colored rod-shaped crystals on top of the cake, which were water soluble. The filtrate was collected in a 2-L Erlenmeyer flask. The solids cake was washed with N,N-dimethylformamide (100.0 mL, 1290 mmol, 100 mass%). The DMF filtrate was collected in a 2-L Erlenmeyer flask. To a separate 5-L ChemGlass reactor was charged water (3000.0 mL, 166530 mmol, 100 mass%). Next, 1.66 g of 7-fluoro-l-methylindoline-2,3-dione was added as seed to the water to form an orange colored suspension. The DMF filtrate was charged to the 5-L reactor slowly while maintaining the batch temp, at less than 29 C over a period of 60 min. Stirring was maintained at 290 rpm. The orange solids precipitated instantly. The 2-L Erlenmeyer flask was rinsed with N,N-dimethylformamide (55.0 mL, 711 mmol, 100 mass%) and charged to the 5-L reactor. The slurry was cooled to 25 C and agitated at 200 rpm for 12 hrs. The mixture remained as a bright orange-colored suspension. The slurry was filtered over a No. l Whatman filter paper in a 9 cm diameter ceramic Buchner funnel to a 4L Erlenmeyer flask to provide a bright orange-colored cake. The cake was washed with 1200 mL of water via rinsing the 5000 mL reactor (400 mL x 2), followed by 300 mL of deionized water introduced directly on the orange cake. The wet cake was dried under suction for 40 min at ambient temperature until liquid was not observed to be dripping from the cake. The cake was introduced into a vacuum oven (800 mbar) with nitrogen sweeping at ambient temperature for 1 hr, at 40-45 C for overnight, and at 25 C for 1 day to provide 7-fluoro-l-methylindoline-2,3-dione (Q, 130.02 g, 725.76 mmol, 100 mass%, 88.77% yield) as a bright orange-colored solid. NMR (400 MHz, DMSO- de) delta 7.57 (ddd, J=12.0, 8.5, 1.0 Hz, 1H), 7.40 (dd, J=7.3, 1.0 Hz, 1H), 7.12 (ddd, J=8.5, 7.5, 4.0 Hz, 1H), 3.29 (d, J=3.0 Hz, 3H). 13C NMR (101 MHz, DMSO-de) delta 182.3, 158.2, 148.8, 146.4, 137.2, 125.9, 124.3, 120.6, 28.7.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

Reference of 16800-68-3, These common heterocyclic compound, 16800-68-3, name is 1-Acetylindolin-3-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 1a (35.0 mg, 0.2 mmol, 1 equiv.), tert-BuOK (22.4 mg, 0.2 mmol, 1.0 equiv.) were added to a Schlenk tube. Then 2 ml THF was added using a syringe. The reaction mixture was stirred 15min,and then added iodonium salt 2 (0.2 mmol, 1.0 eq). The reaction was stirred at 30C for 10 hours.After cooling to room temperature, the solvent was removed in vacuo and the residue was purifiedby silica gel using a proper eluent (EtOAc/Hexane) to afford the desired products

The synthetic route of 16800-68-3 has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 7699-18-5, name is 5-Methoxyindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7699-18-5, category: indolines-derivatives

General procedure: 4.4.22 (Z)-5-methoxy-3-((2-(thiophen-2-yl)-1H-benzo[d]imidazol-6-yl)methylene)indolin-2-one (6b) Compound 6b was prepared according to the method described for compound 5a, employing aldehyde 14 (114 mg, 0.5 mmol) and 5-methoxyindolin-2-one (12b, 81 mg, 0.5 mmol) to obtain the pure product 6b as a yellow solid (104 mg, 56%); mp: 189-191 C; IR (KBr): 3420, 3152, 2920, 2330, 1689, 1640, 1603, 1476, 1430, 1308, 1209, 1092, 1037, 862 cm-1; 1H NMR (300 MHz, DMSO-d6): delta 10.33 (bs, 1H), 7.94-7.83 (m, 2H), 7.75 (s, 1H), 7.68 (s, 1H), 7.67 (s, 1H), 7.55 (d, J = 8.3 Hz, 1H), 7.34 (d, J = 8.4 Hz, 1H), 7.20 (t, J = 4.9 Hz, 1H), 6.84-6.64 (m, 2H), 3.62 (s, 3H); 13C NMR (75 MHz, CDCl3 + DMSO-d6): delta 168.8, 153.7, 148.6, 137.2, 136.3, 133.0, 128.8, 127.0, 126.3, 124.0, 121.9, 114.1, 113.6, 109.9, 109.4, 108.6, 55.0; MS (ESI): m/z 374 [M + H]+; HRMS (ESI): calcd for C21H16O2N3S m/z 374.09561 [M + H]+; found 374.09577.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methoxyindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference of 611-09-6, A common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, molecular formula is C8H4N2O4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of isatin derivatives (1a-1d, 1 mmol) oracenaphthoquinone (5, 1 mmol), methylene nitriles (2a,2b, 1 mmol), 1,3-dicarbonyl (3, 1 mmol), and 5 mg IG in3 cm3 H2O was stirred at 60 C for the mentioned timeshown in tables. Rapid conversion of reagents can beclearly confirmed by reaction color change. The progress ofthe reaction was monitored by TLC using EtOAc/n-hexane(1:3) as an eluent. Upon completion, the reaction mixturewas allowed to cool to room temperature and the precipitatewas obtained from the reaction mixture by filtration.The product 4a was dissolved in DMSO and the catalystwas separated by simple filtration. Pure products wereafforded by evaporation of the solvent under reduced pressure.

The synthetic route of 611-09-6 has been constantly updated, and we look forward to future research findings.

Related Products of 104618-32-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 104618-32-8 as follows.

A solution of N-(4-oxocyclohexyl)phthalimide (14, 5.00 g, 21 mmol, 1 eq.) and 4-methoxyphenylhydrazine hydrochloride (3.59 g, 21 mmol, 1 eq.) in dry ethanol (100 mL) was heated at reflux for 2.5 h. After cooling down to room temperature, the precipitate was filtrated off and washed with ethanol 96% (3 * 10 mL). The solid was dried under reduced pressure and freeze-dried overnight. Rf = 0.66 (cyclohexane/ethyl acetate/dimethylethylamine 5:5:0.2). Colorless solid, mp 222-223 C, yield 6.88 g (97%). Purity (HPLC): 84.1% (tR = 22.2 min). C21H18N2O3 (346.4 g/mol). Exact mass (APCI): m/z = 347.1389 (calcd. 347.1390 for C21H19N2O3 [M + H+]). 1H NMR (400 MHz, DMSO-D6): delta (ppm) = 2.03-2.11 (m, 1H, 2-H), 2.67 (tt, J = 12.3/6.4 Hz, 1H, 2-H), 2.80-2.98 (m, 3H, 1-CH2, 4-H), 3.20-3.28 (m, 1H, 4-H), 3.71 (s, 3H, OCH3), 4.43-4.52 (m, 1H, 3-H), 6.65 (dd, J = 8.7/2.4 Hz, 1H, 7-H), 6.82 (d, J = 2.4 Hz, 1H, 5-H), 7.15 (d, J = 8.7 Hz, 1H, 8-H), 7.84-7.91 (m, 4H, 4-Hphth, 5-Hphth, 6-Hphth, 7-Hphth), 10.61 (s, 1H, NH). 13C NMR (101 MHz, DMSO-D6): delta (ppm) = 22.6 (1C, C-1), 24.7 (1C, C-4), 26.5 (1C, C-2), 47.8 (1C, C-3), 55.3 (1C, OCH3), 99.7 (1C, C-5), 106.3 (1C, C-4a), 109.9 (1C, C-7), 111.2 (1C, C-8), 123.0 (2C, C-4phth, C-7phth), 127.2 (1C, C-4b), 131.3 (1C, C-8a), 131.5 (2C, C-3aphth, C-7aphth), 134.2 (1C, C-9a), 134.4 (2C, C-5phth, C-6phth), 153.0 (1C, C-6), 167.9 (2C, C=O). FTIR (neat): ? (cm-1) = 3425 (w, N-H), 3379 (w, C-H, arom), 2924 (w, C-H, aliph), 1697 (s, C=O), 1597 (w, C-C, arom).

According to the analysis of related databases, 104618-32-8, the application of this compound in the production field has become more and more popular.

Synthetic Route of 17564-64-6,Some common heterocyclic compound, 17564-64-6, name is 2-(Chloromethyl)isoindoline-1,3-dione, molecular formula is C9H6ClNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

tert-Butyl 3-bromo-4-oxo-piperidine-1-carboxylate (2 g, 7.2 mmol) was suspended in THF (2 mL) and cooled in an ice bath before addition of dimethylamine (16 mL of 2 M, 32 mmol). Upon complete addition, the ice bath was removed and the mixture was stirred at ambient temperature for 16 hours. The mixture was partitioned between saturated aqueous sodium bicarbonate solution and EtOAc. The organic phase was dried (Na2SO4), filtered and concentrated in vacuo. The residue was dissolved in THF (28 mL) under N2. The solution was cooled to -78 C and LiHMDS (10 mL of 1 M, 10 mmol) was added dropwise. After 40 minutes, 2- (chloromethyl)isoindoline-1,3-dione (2.32 g, 11.8 mmol) was added in portions over 5 minutes. The solution was stirred for 1 hour then left to warm up to 0 C before being quenched by addition of saturated aqueous NH4Cl solution. The mixture was partitioned between saturated aqueous sodium bicarbonate solution and EtOAc. The organic layer was separated, dried (Na2SO4), filtered and concentrated in vacuo. The residue was purified by column chromatography (silica, 0-10% MeOH/DCM gradient elution) to give tert-butyl 3-(dimethylamino)-5-[(1,3-dioxoisoindolin-2- yl)methyl]-4-oxo-piperidine-1-carboxylate (1.58 g, 50%); MS m/z: 402 (M+H)+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(Chloromethyl)isoindoline-1,3-dione, its application will become more common.