Category: indolines-derivatives

Synthetic Route of 16800-68-3,Some common heterocyclic compound, 16800-68-3, name is 1-Acetylindolin-3-one, molecular formula is C10H9NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 1a (35 mg, 0.2 mmol, 1 equiv.), tert-BuOK (22.4 mg, 0.2 mmol, 1.0 equiv.) were added to a Schlenk tube. Then 2 mL THF was added using a syringe. The reaction mixture was stirred 15 min,and then 6 ( 0.2 mmol, 1.0 eq) was added, and the reaction was stirred at room temperature for 10 hours. the solvent was removed in vacuo and the residue was purified by silica gel using a propereluent (EtOAc/Hexane) to afford the desired products.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Acetylindolin-3-one, its application will become more common.

Electric Literature of 6941-75-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6941-75-9, name is 5-Bromoisoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The mixture of 4-bromophthalimide (225 mg, 1 mmol), 4-RPhSH(3 mmol), K2CO3 (136 mg, 1 mmol) and CuI (10 mg) was added to DMF (10 mL). The solution was heated at 130 C for 6 h under the protection of nitrogen. After cooled, water (30 mL) was added and the precipitation was filtered, washed with water. The product was purified by column chromatography on silica gel using dichloromethane/acetone (60:1).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Bromoisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 99365-40-9, name is 6-Bromoindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. category: indolines-derivatives

Compound 2 (2.1g, 10mmol), 6- bromo-indole (5.6g, 11mmol), glacial acetic acid (60ml) was addedThe two bottles, 3 drops of hydrochloric acid was added dropwise, under a nitrogen atmosphere, 130 refluxed for 24h, cooled to room temperature, adding a lot of water,Extracted with methylene chloride three times, the combined organic phase was washed with saturated sodium chloride, dried over anhydrous MgSO4, spin dry solvent,Petroleum ether: methylene chloride 1:1 (by volume) as eluent, column separation, spin dry to give a brown flaky solid(6.46g, 92%).

The synthetic route of 99365-40-9 has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 150560-58-0, name is 5-Isopropylindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 5-Isopropylindoline-2,3-dione

General procedure: Isatin based oxadiazole were synthesized in two steps, first semicarbazide(1 mmol, 0.71 g) and different substituted benzaldehydes(1 mmol) were mixed and reflux in methanol for 2-3 hrs. The completionof reaction was monitored by TLC. After completion of reaction,the intermediate was further cyclized by treating it with iodine andpotassium carbonate in 1, 4-dioxane to give a 2-aminooxadiazolemoiety. After drying, it was reacted with 5% Na2S2O3 (20 mL) and then it was extracted the desired organic compound from the reaction mixtureusing CH2Cl2/MeOH (10:1, 10 mL×4). The desired organiccompound was dried over anhydrous sodium sulphate and was purifiedusing petroleum ether and ethylacetate mixture as eluent through silicagel column chromatography afford the synthesis of correspondinganalogs. In the second step, 1 mmol of synthesized 2-aminooxadiazolewere refluxed with different substituted isatin in methanol in the presenceof few drops of glacial acetic acid for 3hrs. Reaction completionwas monitored through TLC. After completion of reaction, reactionmixture was washed with chloroform/hexane to obtained desired differentisatin based oxadiazole.

The synthetic route of 150560-58-0 has been constantly updated, and we look forward to future research findings.

Some common heterocyclic compound, 446292-08-6, name is (S)-2-((2-Oxo-3-(4-(3-oxomorpholino)phenyl)oxazolidin-5-yl)methyl)isoindoline-1,3-dione, molecular formula is C22H19N3O6, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: (S)-2-((2-Oxo-3-(4-(3-oxomorpholino)phenyl)oxazolidin-5-yl)methyl)isoindoline-1,3-dione

1360 g of 2-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-1H-iso-indole-1,3(2H)-dione (VI) are suspended in 10.2 l of ethanol at 22 C., and 1103 g of methylamine solution (40% strength in water) are added. The reaction mixture is then heated to 60 to 63 C., and the resulting solution is stirred at this temperature for 2 hours. After cooling to 55 to 60 C., a total of 2348 g of hydrochloric acid solution (20% strength in water) is added until the pH is 2.7, after which the product starts to crystallize. After cooling to 20 C., the precipitated reaction product is filtered off with suction, washed with methanol and then dried. Yield: 875 g; equivalent to 82.7% of theory. Melting point: decomposition above 280 C. 1H NMR (300 MHz, d6-DMSO): 3.25 (m, 2H), 3.72 (m, 2H), 3.98 (m, 3H), 4.42 (m, 3H), 4.97 (m, 1H), 7.42 (d, 2H, J=9.0 Hz), 7.57 (d, 2H, J=9.0 Hz), 8.44 (s (br.), 3H) ppm.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 446292-08-6, its application will become more common.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 32692-19-6, name is 5-Nitroindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. category: indolines-derivatives

General procedure: We described the synthesis of the compound 1 (Table 2) to illustrate the general procedure for TFA accelerated Petasis three-component reaction. The descriptions of the preparations of all reported compounds are in the Supporting information section. To a magnetically stirred mixture of 5-nitroindoline (0.164 g, 1.0 mmol), 4-tolyboronic acid (0.135 g, 1.0 mmol), and glyoxylic acid monohydrate (0.092 g, 1.0 mmol) in CH2Cl2 (5 ml) was added TFA (20 mul). The mixture was stirred at room temperature for 4 h. After the completion of the reaction (TLC monitoring), half of the solvent was evaporated by means of a rotovap. The resulting solid was filtered through a sintered glass funnel. The collected solid was thoroughly washed with petroleum ether and a small amount of ice water (5 ml), and then dried in vacuo at room temperature for 24 h to afford 0.26 g (83.3 %) of 2-(5-nitroindolin-1-yl)-2-(p-tolyl) acetic acid as a light yellow solid.

The synthetic route of 32692-19-6 has been constantly updated, and we look forward to future research findings.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 19727-83-4, name is 6-Nitroindoline, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 6-Nitroindoline

General procedure: To a 100-mL, one-necked, round-bottomed flask,sequentially charged with compound A (2.25 mmol, 1 equiv.), CS2 (11.25 mmol, 5 equiv.), K3PO4 (2.25 mmol, 1 equiv.) and 30 mL ofacetone. The mixture was stirred for 0.5 h at r.t. and then 4-(bromomethyl)benzoic acid (2.25 mmol, 1 equiv.) was added. TLCanalysis was used to indicate the completed reaction. The reactionmixture was concentrated to provide crude compound B.

According to the analysis of related databases, 19727-83-4, the application of this compound in the production field has become more and more popular.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3484-35-3, name is 5-Methylindolin-2-one, A new synthetic method of this compound is introduced below., SDS of cas: 3484-35-3

General procedure: To a solution of 3-substituted-5-benzylidene-2-thioxo-4-thiazolidinone (3a-3h, 8a-8f) (0.003 mol) in 1,4-dioxane (15 ml) was added HC(OEt)3 (2 ml) and BF3·Et2O (2 ml). The reaction mixture was heated to 80 C and stirring was continued at the same temperature for 4 h. The resulting 2-ethylthio-3-substituted-5-benzylidene-4-thiazolium fluoroborate (4a-4h, 9a-9f) was precipitated, filtered off, and dried without any additional purification, as starting material for the following reactions. To a mixture of thiazolium fluoroborate (4a-4h, 9a-9f) (0.003 mol) and indolin-2-one (11a-11f) (0.003 mol) in acetonitrile (15 ml) was added triethylamine (0.91 g, 0.009 mol) dropwise at 25 C, and the mixture was stirred for 4 h at the same temperature. The orange precipitate was collected and washed with ethyl acetate (8 ml). The crude product thus obtained was recrystallized from methanol or acetone to give compound (5a-5s, 10a-10s).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

317-20-4, name is 7-Fluoroisatin, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: indolines-derivatives

Preparation 5. Synthesis of 8-F-4-CO2H-quinoline: To a solution of 7-fluoroisatin (500 mg, 3.03 mmol) in water (10 mL) at the room temperature were added aqueous NaOH solution (2.5 mL, SM, 12.5 mmol) and sodium pyruvate (400 mg, 3.66 mmol), and it?s then placed in a microwavereactor (CEM discover 5) at 110C for 10 mm. The resulting solution was cooled down and acidified to pH 2, and the dark solid was then collected. A suspension ofsolid in water (2 mL) was then placed in a 10 mL microwave tube followed by stirring at 170C (or 280 psi) in a microwave reactor for 5 mm. The desired product (brown solid, 340 mg, 60% yield) was then filtered off and collected. LRMS (M+Hj m/z: cacld 192.04, found 192.16.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 5332-26-3, COA of Formula: C9H6BrNO2

EXAMPLE 20 Reaction of N-bromomethylphthalimide with trimethyl phosphite as described in Example 18 for N-(2-bromoethyl)phthalimide and triethyl phosphite gives dimethyl phthalimidomethylphosphonate.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(Bromomethyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.