Category: indolines-derivatives

Synthetic Route of 17702-83-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 17702-83-9, name is 2-(8-Bromooctyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 0.91 g (3.6 mmol) N-(2 -bromoethyl) phthalimide was dissolved 20 mL DMF, added 0.53 g (3 mmol)1-benzylpiperazine, 0.62 g (4.5 mmol) K2CO3, heated to 60-70 ¡ãC reacted for 4 h, TLC detection, until the benzylpiperazinewas complete reaction. 30 mL of water was added, extracted three times withethyl acetate (20 mL¡Á 3), the organic layer was extracted four times (30mL ¡Á 4)with saturated brine, dried with anhydrous magnesium sulfate, and the solventwas distilled off under reduced pressure, cooled to room temperature, silicagel column chromatography (100-200 mesh silica gel, eluent petroleum ether:ethyl acetate = 1:1 – 1: 4) to give 0.7 g (67percent yield) as a white solid. #10;

The synthetic route of 2-(8-Bromooctyl)isoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Article; Si, Weijie; Zhang, Tao; Zhang, Lanxiang; Mei, Xiangdong; Dong, Mengya; Zhang, Kaixin; Ning, Jun; Bioorganic and Medicinal Chemistry Letters; vol. 26; 9; (2016); p. 2380 – 2382;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 675109-45-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 675109-45-2, name is 6-Amino-2,3-dihydro-1H-isoindol-1-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

6-Ammnoisoindolin-1-one (15.34 mg, 0.104 mmol) was dissolved in DCM (1.0 mL) along with pyridine (0.039 mL, 0.487 mmol) and DIEA (0.032 mL, 0.183 mmol). Intermediate 14SF (28 mg, 0.061 mmol) in 2 mL of DCM was added dropwise, and the reaction mixture was stirred at room temperature for 50 minutes. The reaction was quenched with 1.0 N HC1 (0.5 mL). All solvent was removed under vacuum. The crudewas dissolved in DMSO/THF (2:1, 6 mL) and purified via preparative LC/MS (method C,40-100% B over 18 mm, then a 5-mm hold at 100% B). Fractions containing the desired product were combined and dried via centrifugal evaporation to yield Example 178 (10.7 mg, 31% yield). ?H NMR (500MHz, DMSO-d6) 8.72 (s, 1H), 8.56 (s, 1H), 8.51 (br. s., 1H), 7.86 (d, J=10.7 Hz, 2H), 7.81 (br. s., 2H), 7.61 (br. s., 1H), 7.46 (d, J=5.8 Hz, 1H),5.48-5.38 (m, 1H), 4.54 (d, J12.2 Hz, 1H), 4.41 (dd, J=12. 1, 7.2 Hz, 1H), 4.29 (s, 2H),4.08 (s, 3H), 3.64 (dd, J15.9, 9.8 Hz, 1H), 3.36 (d, J=13.7 Hz, 1H), 2.62 (s, 3H);LC-MS: method C, 2 to 98% B. RT = 2.21 mm, MS (ESI) m/z: 572.30 (M+H).Analytical HPLC purity (method B): 100%.

The synthetic route of 6-Amino-2,3-dihydro-1H-isoindol-1-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; ZHANG, Xiaojun; PRIESTLEY, Eldon Scott; HALPERN, Oz Scott; JIANG, Wen; REZNIK, Samuel Kaye; RICHTER, Jeremy M.; (545 pag.)WO2018/13776; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 111992-61-1, name is 2-(3-Bromo-2,2-dimethylpropyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., Application In Synthesis of 2-(3-Bromo-2,2-dimethylpropyl)isoindoline-1,3-dione

Step 3 A suspension of 3-(4-phenoxyphenyl)-1H-pyrazolo[3,4-d]pyrimidin-4-amine (400 mg, 1.3 mmol, 1.00 equiv), 2-(3-bromo-2,2-dimethylpropyl)-2,3-dihydro-1H-isoindole-1,3-dione (570 mg, 1.95 mmol, 1.50 equiv) and cesium carbonate (847 mg, 2.60 mmol, 2.00 equiv) in NMP (50 mL) was stirred at 100 C. for 12 h under nitrogen atmosphere. It was quenched with water (150 mL). The resulting solution was extracted with ethyl acetate (5*30 mL). The organic layers were combined, dried over sodium sulfate and concentrated under vacuum. The residue was applied onto a silica gel column eluting with dichloromethane/methanol (10/1). This resulted in 280 mg (41%) of 2-(2-[[4-amino-3-(4-phenoxyphenyl)-1H-pyrazolo[3,4-d]pyrimidin-1-yl]methyl]-2-methylpropyl)-2,3-dihydro-1H-isoindole-1,3-dione as a yellow oil.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Principia Biopharma Inc.; Goldstein, David Michael; US8673925; (2014); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 7699-18-5, A common heterocyclic compound, 7699-18-5, name is 5-Methoxyindolin-2-one, molecular formula is C9H9NO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 4.4.14 (Z)-3-((2-(3,5-difluorophenyl)-1H-benzo[d]imidazol-6-yl)methylene)-5-methoxyindolin-2-one (5n) Compound 5n was prepared according to the method described for compound 5a, employing aldehyde 11d (129 mg, 0.5 mmol) and 5-methoxyindolin-2-one (12b, 81 mg, 0.5 mmol) to obtain the pure product 5n as a yellow solid (110 mg, 55%); mp: 296-298 C; IR (KBr): 3425, 3165, 2925, 2357, 1673, 1640, 1560, 1410, 1282, 1190, 1120, 942, 866, 745 cm-1; 1H NMR (300 MHz, DMSO-d6): delta 10.69 (bs 1H), 8.04 (s, 1H), 7.91 (s, 3H), 7.75 (s, 1H), 7.62 (s, 2H), 7.47 (t, J = 7.9 Hz, 1H), 7.05-6.87 (m, 2H), 3.79 (s, 3H); 13C NMR (75 MHz, CDCl3 + DMSO-d6): delta 168.8, 164.4 and 161.3 (d, J = 246.1 Hz), 163.7 and 161.7 (d, J = 246.1 Hz) 160.7,154.6, 149.7, 141.2, 137.5, 134.6, 128.7 (d, J = 4.9 Hz), 127.6, 125.4, 124.8, 122.7, 120.6, 118.6, 109.8, 109.4, 105.7, 55.2; MS (ESI): m/z 404 [M + H]+; HRMS (ESI): calcd for C23H16O2N3F2 m/z 404.12308 [M + H]+; found 404.12758.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Kamal, Ahmed; Nagaseshadri; Nayak, V. Lakshma; Srinivasulu, Vunnam; Sathish, Manda; Kapure, Jeevak Sopanrao; Suresh Reddy; Bioorganic Chemistry; vol. 63; (2015); p. 72 – 84;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 32692-19-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 32692-19-6, name is 5-Nitroindoline, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: We described the synthesis of the compound 1 (Table 2) to illustrate the general procedure for TFA accelerated Petasis three-component reaction. The descriptions of the preparations of all reported compounds are in the Supporting information section. To a magnetically stirred mixture of 5-nitroindoline (0.164 g, 1.0 mmol), 4-tolyboronic acid (0.135 g, 1.0 mmol), and glyoxylic acid monohydrate (0.092 g, 1.0 mmol) in CH2Cl2 (5 ml) was added TFA (20 mul). The mixture was stirred at room temperature for 4 h. After the completion of the reaction (TLC monitoring), half of the solvent was evaporated by means of a rotovap. The resulting solid was filtered through a sintered glass funnel. The collected solid was thoroughly washed with petroleum ether and a small amount of ice water (5 ml), and then dried in vacuo at room temperature for 24 h to afford 0.26 g (83.3 %) of 2-(5-nitroindolin-1-yl)-2-(p-tolyl) acetic acid as a light yellow solid.

The chemical industry reduces the impact on the environment during synthesis 5-Nitroindoline. I believe this compound will play a more active role in future production and life.

Reference:
Article; Zhang, Jing; Yun, Fan; Xie, Rui; Cheng, Chunhui; Chen, Guangyao; Li, Jingxuan; Tang, Pingwah; Yuan, Qipeng; Tetrahedron Letters; vol. 57; 35; (2016); p. 3916 – 3919;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 611-09-6, name is 5-Nitroindoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 611-09-6, category: indolines-derivatives

General procedure: GN/SO3H (80 mg) was added to the 3 mL of EtOH/water (1:1) and dispersed for 30 min. Then, malononitrile (1 mmol), isatin (1 mmol), and dimedone (1 mmol) were added to the mixture and the mixture was heated to reflux and kept at this temperature for an appropriate time. After the time of reaction was completed, water was separated by centrifuging followed by extracting the crude product by ethyl acetate. The solvent was dried using Na2SO4 and removed from the reaction by evaporation with a rotary evaporator. Finally, the crude product was recrystallized in hot ethanol to achieve the pure product. The GN/SO3H nanocomposite was washed and reused several times.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri; Research on Chemical Intermediates; vol. 44; 11; (2018); p. 6979 – 6993;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., Safety of 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione

The title compound from Step A above (28 g, 114 mmol) was dissolved in dichloromethane (990 mL) and pyridinium chlorochromate (33.6 g, 157 mmol) was added in portions. The reaction mixture was stirred at room temperature for 8 h. Then another batch of pyridinium chlorochromate (10.4 g, 48.6 mmol) was added in portions and stirring at room temperature was continued for 18 h. The reaction mixture was filtered through a pad of Celite and the Celite pad was washed with dichlormethane (400 mL). The combined filtrate was concentrated under reduced pressure and the residue was purified by chromatography on silica using ethyl acetate/n-heptane (60/40) as a mobile phase to afford the title compound as a white solid (24.62 g, 88%)1H-NMR (400 MHz, CDCl3): delta=2.17-2.24 (m, 2H), 2.60-2.71 (m, 4H), 2.80-2.90 (m, 2H), 4.78 (tt, 1H), 7.84-7.88 (m, 2H), 7.97-8.02 (m, 2H)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; AC Immune, S.A.; US2011/280808; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, molecular formula is C10H9Cl2NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C10H9Cl2NO

119 ml (90.1 g, 0.698 mols, 3.21 molar equivalents) of N,N-diisopropylethylamine, 500 ml of acetonitrile and 55.8 g (0.218 mols, 1.0 molar equivalents) of 3-(l- piperazinyl) -1, 2-benzisothiazole hydrochloride (addition salt of compound of formula (III) and hydrochloric acid) are added into a beaker equipped with a magnetic stirrer. The resulting suspension is stirred for 10 minutes. At this point 50 g (0.217 mols, 1.0 molar equivalent) of 5- (2-chloroethyl) -6-chloro-l, 3-dihydro-indole-2- (2H) -one (Compound of formula (II) wherein X is chlorine) and 0.26 g (1.174 mmols, 0.008 molar equivalents) of NaI are added. The resulting brown suspension is charged into a 1 L reactor vessel, which is heated to 121-122 C (internal pressure increases to 200 kPa) for 25 hours. The reaction is cooled to room temperature and filtered. The solid is washed with acetonitrile, and 56 g of a wet solid are obtained. –> The resulting wet solid is stirred with 4 volumes of water at reflux temperature for 1 h to remove inorganic salts. The suspension is cooled to room temperature and filtered. The solid is washed with water. Ziprasidone base is obtained in 56% molar yield and the purity is 97.8% by HPLC.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 118289-55-7, its application will become more common.

Reference:
Patent; MEDICHEM, S.A.; WO2006/34964; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 21857-45-4, name is 5-Methoxyindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Formula: C9H11NO

12 g of compound obtained in the preceding step are heated at 140 C. for 3 h in HBr (48%, 200 ml). After cooling to AT, filtering, the filtrate is concentrated dry. The residue is washed with acetone and dried. 14.8 g of desired product are obtained and used as such.

The synthetic route of 21857-45-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CEREP; US2009/233910; (2009); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 924304-73-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 924304-73-4, name is 4-Chloroisoindoline hydrochloride, This compound has unique chemical properties. The synthetic route is as follows.

Step 4: Synthesis of (3J?,5S)-1-((S)-4-(but-3-enyIoxy)-2-(tert- butoxycarbonylamino)butanoyl)-5-((li?,25)-1-(ethoxycarbonyl)-2- vinylcyclopropylcarbamoyl)pyrrolidin-3-yl 4-chIoroisoindoline-2-carboxylate[0489] (17?,25)-ethyl l-((25,4i)-1-((5)-4-(but-enyloxy)-2-(tert- butoxycarboalphaylamino)butanoyl)-4-hydroxypyrrolidine-2-carboxamido)-2- vinylcyclopropanecarboxylate (0.55 g, 1.1 mmol) in THF (20 mL) was added 1,1 ‘- carbonyldiimidazole (0.204 g, 1.26 mmol) in one portion. The reaction was stirred at room temperature for 3 hours. To the reaction was then added the N-ethyl-N-isopropylpropan-2- amine (0.92 mL, 5.3 mmol), followed by 4-chloroisoindoline hydrochloride (0.258 g, 1.37 mmo.). The reaction was stirred at 50 C for 18 hours. The solvent was removed. The residue was partitioned between ethyl acetate (20 mL) and saturated sodium bicarbonate solution. The organic layer was separated and dried over sodium sulfate. After removal of solvent, the residue was purified by chromatography (HexanerEthyl acetate=l :3) to give (3i?,5?)-1-((S)-4- (but-3-enyloxy)-2-(tert-butoxycarbonylamino)butanoyi)-5-(( IR,2S)- 1 -(ethoxycarbonyl)-2- vinylcyclopropylcarbamoyl)pyrrolidin-3-yl 4-chloroisoindoline-2-carboxylate as white solid (0.49 g, 66%). MS: Calcd.: 702.3; Found: [M+H]+ 703.1.

The chemical industry reduces the impact on the environment during synthesis 4-Chloroisoindoline hydrochloride. I believe this compound will play a more active role in future production and life.

Reference:
Patent; INTERMUNE, INC.; ARRAY BIOPHARMA, INC.; WO2008/137779; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem