Category: indolines-derivatives

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 603-62-3, name is 3-Nitrophthalimide, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C8H4N2O4

Example 1 Preparation of 6-nitrophthalamic acid (2) Commercially available 4-nitro-isoindole-1,3-dione (1) (25 g, 0.13 mol) was stirred in water (300 mL) at 0 C. Over a few minutes, an aqueous solution of sodium hydroxide (30% w/w, 35 g, 0.26 mol) was added. The mixture was stirred for 1.5 h at 0-5 C. The cold solution was acidified with concentrated HCl (22 mL, 0.26 mol) and the product precipitated as a white solid. After allowing to stand overnight in a refrigerator, the mixture was filtered to afford the title compound (26.3 g, 96%) as a white solid: 1H NMR (300 MHz, DMSO) delta 8.2 (s, 1H), 8.15 (d, 1H), 7.93 (d, 1H), 7.88-7.65 (m, 2H); ESIMS m/z 211 ([M+H]+), m/z 209 ([M-H]-).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 603-62-3.

Reference:
Patent; DOW AGROSCIENCES LLC; US2011/301178; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 102359-00-2,Some common heterocyclic compound, 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, molecular formula is C9H7NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 12 To a solution of 0.88g of 5-carboxyoxindol in 10 ml of DMF was added under ice-cooling 0.82 ml of triethylamine, and 0.77 ml of isobutyl chloroformate was added thereto subsequently. The mixture was stirred at the same temperature for 1 hour. Then, 1.1g of 1-benzylpiperazine was added thereto, and the mixture was stirred at room temperature overnight. After the reaction was completed, DMF was removed under reduced pressure, and to the residue was added an aqueous sodium hydrogencarbonate solution and extracted with chloroform. After washing with water and drying over magnesium sulfate, chloroform was distilled off under reduced pressure. The resultant residue was purified by silica-gel column chromatography (eluent: methylene chloride: methanol = 50:1) and recrystallized from isopropyl alcohol to give 0.7g of 5-(4-benzyl-1-piperazinylcarbonyl)oxindol. (Not claimed) m.p.: 151-153C

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Oxoindoline-5-carboxylic Acid, its application will become more common.

Reference:
Patent; OTSUKA PHARMACEUTICAL CO., LTD.; EP168003; (1991); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 6326-79-0, A common heterocyclic compound, 6326-79-0, name is 6-Bromoisatin, molecular formula is C8H4BrNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To R4 (500 mg, 2.21 mmol) in acetonitrile (15 mL) is added Mel (0.303 mL, 4.87 mmol) and K2CO3 (1.2 g, 8.68 mmol) and the reaction mixture stirred at 60 C for 45 min DCM and water is added and the aqueous layer extracted twice with DCM, the combined organic layers are washed with brine, dried and concentrated. Yield 65%. m/z 240/242 [M+H]+, rt 0.49 min, LC-MS Method b.

The synthetic route of 6326-79-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; GRUNDL, Marc; OOST, Thorsten; PAUTSCH, Alexander; PETERS, Stefan; RIETHER, Doris; WIENEN, Wolfgang; WO2013/41497; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 32692-19-6, name is 5-Nitroindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C8H8N2O2

To a solution of 5-nitroindoline (11.72 g) and triethylamine (8.67 g) in N, N-dimethylformamide (150 ml) was added dropwise chloroacetyl chloride (8.06 g) at 5C and the mixture was stirred at ambient temperature for 20 hours. The mixture was poured into a mixture of ethyl acetate and water and the separated organic layer was washed with water and brine, dried over magnesium sulfate and evaporated in vacuo. The residue was triturated with ethyl acetate and collected by filtration to give 1- (CHLOROACETYL)-5-NITROINDOLINE (14.66 g) as a yellow crystal. 1H-NMR (DMSO-d6): 8 3. 28 (2H, t, J=8.6 Hz), 4.25 (2H, t, J=8.6 HZ), 4.64 (2H, s), 8.1-8. 2 (3H, m) ESI-MS (m/z): 263 (M+Na) +

The synthetic route of 32692-19-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; FUJISAWA PHARMACEUTICAL CO., LTD.; DAISO CO., LTD.; WO2004/39795; (2004); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 59-48-3, name is Indolin-2-one, A new synthetic method of this compound is introduced below., category: indolines-derivatives

Oxindole (1.30 g, 0.010 mmol) was suspended in dry acetonitrile (22.0 mL) under N2 and cooled to -10 C. To this stirred mixture was added recrystallized NBS (2.00 g, 0.011 mol) portionwise. The resulting suspension was stirred at -10 to 10 C. for 3 h. The precipitated solid was collected by filtration, washed with H2O and dried to give the intermediate title compound as an off white solid 1.75 g (82%). Electrospray mass spectrum (M-1)=210, (M-1)=211

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Eli Lilly and Company; US7034045; (2006); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 110568-64-4, name is 6-Nitroisoindolin-1-one, molecular formula is C8H6N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 110568-64-4

To a solution of 5-nitro-2,3-dihydro-1H-isoindol-1-one (60 mg, 0.337 mmol) in methanol (20 mL) was added 50 mg of 10percent Pd on carbon. The mixture was hydrogenated (with a balloon) for 1 hour. Filtration through Celite.(TM). followed by concentration led to 38 mg of 5-amino-2,3-dihydro-1H-isoindol-1-one as a tan solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 110568-64-4, its application will become more common.

Reference:
Patent; Wyeth; US2010/15141; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3416-57-7, name is 2-(2-Oxopropyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 2-(2-Oxopropyl)isoindoline-1,3-dione

EXAMPLE 1 Phthalimidoacetone ethylene ketal A solution of phthalimidoacetone 61.9 g (300 mmole) and ethylene glycol 18.9 g (300 mmole) in 300 ml of benzene in the presence of concentrated sulfuric acid (1 drop) is refluxed with stirring for 24 hours. An additional portion of ethylene glycol (18.9 g., 300 mmole) and p-toluenesulfonic acid (3 mg) is added and refluxing is continued for 65 hours. The reaction mixture is cooled in ice, washed with saturated sodiumchloride solution and dried over anhydrous sodium sulfate. The benzene is removed in vacuo and the residue is crystallized from methanol to give 67 g (90%) of phthalimidoacetone, ethylene ketal as white prisms of melting point 92-94 C.

The synthetic route of 3416-57-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; The Upjohn Company; US3992408; (1976); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 317-20-4, name is 7-Fluoroisatin, A new synthetic method of this compound is introduced below., Recommanded Product: 317-20-4

STEP C: 2-amino-3-fluoro-benzoic acid A mixture of 19.27 g of the product of Step B and 197 ml of 10N sodium hydroxide solution was heated to 70 C. with stirring and heating was ceased to add 36.5 ml of 30% hydrogen peroxide over 20 minutes during which the temperature rose to 80 C. and descended to 70 C. At the end of the addition, the mixture was heated to 80 C. and held there for 10 minutes and then was cooled during which a mass formed. The latter was added to 200 ml of water with stirring and the pH was adjusted to 1 by addition of concentrated hydrochloric acid at a temperature less than 20 C. The mixture was stirred for 90 minutes and was vacuum filtered. The product was empasted twice with iced water and dried under reduced pressure at 70 C. The product was crystallized from 100 ml of a 1-1 ethanol-water mixture and 3 ml of acetic acid. The mixture was iced for one hour and was vacuum filtered. The product was empasted with a 1-1 ethanol-water mixture and dried at 70 C. under reduced pressure to obtain 14.8 g of 2-amino-3-fluoro-benzoic acid melting at 188 C.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Roussel Uclaf; US4736033; (1988); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 61-70-1, name is 1-Methylindolin-2-one, A new synthetic method of this compound is introduced below., Recommanded Product: 61-70-1

General procedure: To a Schlenk tube were added indolin-2-one 1 (0.3 mmol), t-BuOOH (0.6 mmol), and DCE (2 mL). Then the tube was stirred at 85 oC under air for the indicated time until complete consumption of starting material monitored by TLC analysis. After the reaction was finished, the reaction mixture was washed with brine. The aqueous phase was re-extracted with ethyl acetate (3¡Á10 mL). The combined organic extracts were dried over Na2SO4, removal of the solvent under vacuum afforded the crude product, which was purified further by column chromatography using hexane-ethyl acetate (10:1).

The synthetic route of 61-70-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ying, Wei-Wei; Zhu, Wen-Ming; Liang, Hongze; Wei, Wen-Ting; Synlett; vol. 29; 2; (2018); p. 215 – 218;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 110568-64-4, name is 6-Nitroisoindolin-1-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C8H6N2O3

6-Nitro-2,3-dihydroisoindol-1-one (4.7 g, 26 mmol) was dissolved in acetic acid (130 ml) and hydrogenated at 50 psi (3 bar) in the presence of palladium on charcoal (0.47 g) overnight. The catalyst was filtered off through a pad of Hyflo and the acetic acid was removed in vacuo. The residue was triturated with dichloromethane/hexane and the resulting solid was filtered off to afford the title compound (3.56 g, 91%). 1H NMR (360 MHz, d6 DMSO) X 8.28 (1H, s), 7.17 (1H, d, J=8 Hz), 6.82 (1H, s), 6.78 (1H, dd, J=8.1, 1.8 Hz), 5.25 (2H, s), 4.16 (2H, s). m/z (ES+) 149 (M+H)+.

The synthetic route of 6-Nitroisoindolin-1-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Boase, Amanda Louise; Ladduwahetty, Tamara; MacLeod, Angus Murray; Merchant, Kevin John; US2004/58970; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem