Category: indolines-derivatives

Synthetic Route of 20780-72-7,Some common heterocyclic compound, 20780-72-7, name is 4-Bromoisatin, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In an ordinary vial equipped with a Teflon-coated stir bar, thiourea IV or V (0.04 mmol, 11.89 mg, 20 mol percent) was dissolved in 1.0 mL of THF. Then the corresponding isatins 1 (0.1 mmol, 1.0 equiv) was added, followed by the addition of alpha,beta-unsaturated ketones 2 (0.2 mmol, 2.0 equiv). The vial was capped with a rubber stopper and the mixture was stirred at room temperature for the time given in the tables. The crude mixture was then purified by flash column chromatography silica gel, using hexane/ethylacetate 2:1 as the eluent. Solvent was removed in vacuo to give the desired products.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Bromoisatin, its application will become more common.

Reference:
Article; Liu, Guo-Gui; Zhao, Hua; Lan, Yu-Bao; Wu, Bin; Huang, Xiao-Fei; Chen, Jian; Tao, Jing-Chao; Wang, Xing-Wang; Tetrahedron; vol. 68; 20; (2012); p. 3843 – 3850;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 552330-86-6, name is 5-Bromoisoindolin-1-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 552330-86-6, name: 5-Bromoisoindolin-1-one

(i) (S)-tert-Buty l-(l-amino-3-(4-(l-(difluoromethyl)-6-oxo-l,6-dihydropyridin-3- yl)phenyl)-l-oxopropan-2-ylcarbamoyl)cyclohexylcarbamatePotassium carbonate (178 mg) in water (5 mL) was added to (S)-tert-butyl l-(l-cyano-2-(4- (4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2-yl)phenyl)ethylcarbamoyl)cyclohexylcarbamate (Example 23 step (i), 300 mg), 5-bromoisoindolin-l-one (141 mg) and 1,1 bis(di-tert- butylphosphino)ferrocene palladium dichloride (12 mg) in degassed acetonitrile (15 mL) at 20C under an atmosphere of nitrogen. The resulting solution was stirred at 90C for 4h. The reaction mixture was concentrated to dryness and the residue purified by chromatography on silica eluting with ethyl acetate to afford the sub-titled compound (180 mg) as a colourless solid.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; FORD, Rhonan; KINCHIN, Elizabeth; MATHER, Andrew; METE, Antonio; MILLICHIP, Ian; STANIER, Andrew Geoffrey; WO2011/154677; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 20870-90-0, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 20870-90-0, name is 5-Bromo-1-methyl-2-oxoindoline, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: To a precooled stirring suspension of NaH (6.0 mmol, 0.144 g) in THF (10 mL) at -78 C was added a solution of N-methyloxindole (5a) (6.0 mmol, 0.883 g) in THF (10 mL) dropwise. Then the cooling bath was removed and stirring continued for 5 min (till the formation of clear solution). Then the reaction mixture was again cooled to -78 C and a solution of methyl 3-hydroxy-2-methylene-3-phenylpropanoate (6a) (2.0 mmol, 0.468 g) in THF (15 mL) was added dropwise over 30 min. After stirring for further 10 min at the same temperature, the cooling bath was removed and the reaction was quenched with saturated NH4Cl solution and extracted with EtOAc (3¡Á30 mL). Combined organic layer was dried over anhydrous Na2SO4.. Solvent was removed and the crude obtained was purified by column chromatography(10-15% EtOAc in hexanes) provided title compound (7a) (0.539 g) as a colorless solid in 84% yield.

The chemical industry reduces the impact on the environment during synthesis 5-Bromo-1-methyl-2-oxoindoline. I believe this compound will play a more active role in future production and life.

Reference:
Article; Basavaiah, Deevi; Lingam, Harathi; Babu, Thelagathoti Hari; Tetrahedron; vol. 74; 19; (2018); p. 2306 – 2313;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 24566-79-8 as follows. Computed Properties of C14H16BrNO2

To a stirred solution of compound 3-i (6.39 g, 20.3 mol) in DMF (60 mL) was added potassium thioacetate (2.78 g, 34.3 mmol) portion wise and stirred for 20 mm at room temperature. After complete addition, the reaction mixture was stirred at room temperature for 30 mm. Reaction progress was monitored by TLC; after completion the reaction mixture was quenched with ice-cold water (250 mL) and stirred for 1 h. The resultant precipitated was filtered, washed with water (100 mL) and dried in vacuo to afford 4-i as an off-white solid(5.8 g, 93.5%). LCMS: 306.20 (M+1).

According to the analysis of related databases, 24566-79-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CV6 THERAPEUTICS (NI) LIMITED; SPYVEE, Mark; LADNER, Robert, D.; (340 pag.)WO2018/98207; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 446292-07-5,Some common heterocyclic compound, 446292-07-5, name is (R)-2-(2-Hydroxy-3-((4-(3-oxomorpholino)phenyl)amino)propyl)isoindoline-1,3-dione, molecular formula is C21H21N3O5, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

100 g (i?)-2-(2-hydroxy-3-(4-(3-oxo-morpholino) phenyl amino) propyl) isoindoline-l,3-dione of Formula (F) and MDC (1000 ml) were added to RBF at 25C to 35C and heated to 40C to 45C. Further, 61 g Nu,Nu-Carbonyl diimidazole (CDI) and 0.5 g DMAP were added and stirred for 3-4 hours. Excess MDC was evaporated under reduced pressure. The reaction mass was cooled to 25C to 35C followed by addition of dilute HCl solution and stirred for 1 hour and finally filtered and washed with 2 x 200 ml water to afford title compound as (S)-2-((2-oxo 3-(4-(3-oxo- mo holno)phenyl)oxazolidin-5-yl)methyl)isoindoline-l,3-dione of Formula (I).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (R)-2-(2-Hydroxy-3-((4-(3-oxomorpholino)phenyl)amino)propyl)isoindoline-1,3-dione, its application will become more common.

Reference:
Patent; CADILA HEALTHCARE LIMITED; DWIVEDI, Shriprakash, Dhar; PRASAD, Ashok; PAL, Daya, Ram; SHARMA, Mukul, Hari, Prasad; JAIN, Kuldeep, Natwarlal; PATEL, Naitik, Bharatbhai; WO2013/98833; (2013); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 118289-55-7, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 118289-55-7 as follows.

100.0 g of 6-Chloro-5-(2-chloroethyl) oxindole, 133.39 g of 3-(l-Piperazinyle)- 1,2-benzisothiazole hydrochloride, 105.94 g of sodium carbonate and 1500 mL of water were taken in round bottom flask and heated to 1000C to HO0C for 24-26 hours. The reaction mixture was cooled and maintained for 30 min. The solid was filtered and washed with water. The wet solid was further slurried with water followed by adjusting the pH of the reaction mass with dilute acetic acid to 6.0 to 7.5 and maintain the reaction mass for 1-2 hours. The solid was filtered and washed with water. The wet solid was treated with isopropanol 1100 mL in round bottom flask and heated at 750C to 850C for 2 hours. The reaction mixture was cooled, the obtained solid was filtered and washed with isopropanol. The wet solid was dried at 6O0C to 650C for 8-10 hours to obtain crude Ziprasidone base.

According to the analysis of related databases, 118289-55-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CADILA HEALTHCARE LIMITED; SHAH, Niraj, Shyamlal; DWIVEDI, Shriprakash, Dhar; WO2010/73255; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 13220-46-7,Some common heterocyclic compound, 13220-46-7, name is 4-Methylindolin-2-one, molecular formula is C9H9NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 21 3-[2,4-Dimethyl-5-(4-methyl-2-oxo-1,2-dihydroindol-3-ylidene-methyl)-1H-pyrrol-3-yl]-propionic acid 3-(2-Carboxyethyl)-2,4-dimethyl-5-formylpyrrole (97.5 mg), 74 mg 4-methyl-2-oxindole, and 75 muL piperidine in 3 mL of ethanol were heated at 95 C. for 5 hours. The reaction mixture was cooled and concentrated. The residue was suspended in 6 N of aqueous hydrochloric acid. The precipitate was filtered, washed with water to pH 6 and dried in a vacuum oven overnight to give 60 mg (37%) of the title compound as a green solid. 1H-NMR (360 MHz, DMSO-d6): delta 13.41 (s, br, 1H, NH-1′), 12.03 (s, br, 1H, COOH), 10.72 (s, br, 1H, NH-1), 7.50 (s, 1H, H-vinyl), 7.01 (t, J=7.82 Hz, 1H, H-6), 6.79 (d, J=7.82 Hz, H-5), 6.74 (d, J=7.82 Hz, 1H, H-7), 2.64 (t, J=7.76 Hz, 2H, CH2CH2COOH), 2.56 (s, 3H, CH3), 2.34 (t, J=7.76 Hz, 2H, CH2CH2COOH), 2.29 (s, 3H, CH3), 2.18 (s, 3H, CH3); MS m/z (relative intensity, %) 325 ([M+1]+, 100).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Methylindolin-2-one, its application will become more common.

Reference:
Patent; Sugen, Inc.; US6395734; (2002); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 141452-01-9, name is Methyl indoline-5-carboxylate, A new synthetic method of this compound is introduced below., SDS of cas: 141452-01-9

To a stirred solution of 4,6-dichloro-5-methylpyrimidine (101 mg, 0.62 mmol) in n- propanol (2.0 ml.) was added 2,3-dihydro-1 H-indole-5-carboxylic acid methyl ester {Bioorg. Med. Chem. Lett. 2008, 18, 5684 – 8) (100 mg, 0.56 mmol). The resulting yellow solution was heated at reflux (100 degrees Celsius). After 4 hours at reflux the reaction mixture was cooled to room temperature and was concentrated in vacuo. The reside was purified by flash chromatography, eluting with a gradient mixture of 10-40% ethyl acetate to heptane to give methyl 1-(6-chloro-5-methylpyrimidin-4-yl)indoline-5- carboxylate as a white solid (60 mg).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; PFIZER INC.; DAROUT, Etzer; DENINNO, Michael, Paul; FUTATSUGI, Kentaro; GUIMARAES, Cristiano, Ruch, Werneck; LEFKER, Bruce, Allen; MASCITTI, Vincent; MCCLURE, Kim, Francis; MUNCHHOF, Michael, John; ROBINSON, Ralph, Pelton, Jr.; WO2010/128414; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 4403-36-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4403-36-5, name is 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 31 1-[5-(2-Phthalimidoethanesulfonamido)indole-2-carbonyl]-4-[N-methyl-N-(3-(1-methylethylamino)-2-pyridinyl)amino]piperidine (I) To a solution of 1-[5-aminoindole-2-carbonyl]-4-[N-methyl-N-(3-(1-methylethylamino)-2-pyridinyl)amino]piperidine (PREPARATION 56, 606 mg) in dry methylene chloride (5 ml) under nitrogen is added pyridine (127 mul, 1.05 equivalents) and 2-phthalimidoethanesulfonyl chloride (400 mg). The mixture is stirred at 20-25 for 3 days and then diluted with methylene chloride (40 ml) and water (20 ml). The layers are separated and the organic phase is washed with saline (15 ml), dried over sodium sulfate, and concentrated under reduced pressure to give a residue which is then chromatographed on silica gel (230-400 mesh, 85g, 8 psi), eluding with a gradient of methanol/chloroform (1/99-2.5/97.5). The appropriate fractions (Rf =0.33, TLC, methanol/chloroform, 5/95) are pooled and concentrated to give the title compound, NMR (CDCl3) 10.33, 7.80, 7.76-7.63, 7.35, 7.22, 6.95, 6.85, 6.69, 4.65, 4.51, 4.13, 3.60-3.40, 3.40-2.90, 2.64, 1.94, 1.65 and 1.22 delta.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; The Upjohn Company; US5599930; (1997); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 552330-86-6, The chemical industry reduces the impact on the environment during synthesis 552330-86-6, name is 5-Bromoisoindolin-1-one, I believe this compound will play a more active role in future production and life.

To a solution of 5-bromo-2,3-dihydro-isoindol-l-one (1 equiv) in dry dioxan (0.1 M) were added bis(pinacolato)diboron (1.1 equiv), potassium acetate (3.5 equiv) and dppf (0.05 equiv). The reaction mixture was degassed with nitrogen for 20 minutes. PdCl2(dppf) (0.05 equiv) was added to the reaction mixture, which was degassed for a further 5 minutes. The reaction mixture was heated to 70C for 2 hours under nitrogen then heated to 120C for 16 hours. The reaction mixture was partitioned between EtOAc and water. The aqueous phase was further extracted with EtOAc and the combined organic phases dried (MgSO4), filtered and concentrated in vacuo. The residue was dissolved in CH2Cl2 and hexane was added. The resulting suspension was filtered and the collected brown powder was dried and used without further purification.5-(4,4,5,5-Tetramethyl-[l,3,2]dioxaborolan-2-yl)-2,3-dihydro-isoindol-l-one: (94 % yield, 76 % purity, main impurity being the boronic acid 13 %) m/z (LC-MS, ESP): 260.4 [2M+H]+ R/T = 3.51 min

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Bromoisoindolin-1-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; KUDOS PHARMACEUTICALS LIMITED; WO2008/23161; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem