Category: indolines-derivatives

Reference of 201940-08-1, These common heterocyclic compound, 201940-08-1, name is tert-Butyl 5-bromoisoindoline-2-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

5-Bromo-1,3-dihydro-isoindole-2-carboxylic acid tert-butyl ester (2.97 g, 10 mmol) was azeotropically dried by evaporation from toluene. Tris(dibenzylideneacetone)dipalladium (0) (228 mg, 0.25 mmol), 2-(di-tert-butylphosphino)biphenyl (149 mg, 0.50 mmol) and sodium tert-butoxide (1.34 g, 13.9 mmol) were added and the flask was purged with nitrogen. Toluene (25 mL) then N-methylpiperazine (1.33 mL, 12 mmol) were added and the mixture was heated to 800C for 2 hours. After allowing to cool to r.t. the mixture was diluted with ether, filtered through Celite and concentrated to give a residue that was purified by flash chromatography on silica (2M methanolic ammonia/dichloromethane, 1% to 3% gradient). This afforded the title compound as a brown solid (1.45g, 46%). 1H NMR (MeOH-d4) 7.15 (1H, m), 6.94-6.88 (2H, m), 4.60-4.54 (4H, m), 3.20-3.17 (4H, m), 2.63-2.60 (4H, m), 2.34 (3H, s), 1.52 (9H1 s). MS: [M+H]+ 318.

The synthetic route of 201940-08-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; WO2008/44045; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 3891-07-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3891-07-4, name is 2-(2-Hydroxyethyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

a synthetic process of amlodipine besylate,The difference from Embodiment 1 is thatStep 2 specifically includes:In the reaction tank,Put 350kg of toluene,Stirring,Distilling toluene,After the liquid in the water separator is full,Keep the reflux water for 60 minutes,Sampling to determine water separation,When the water content of the reflux liquid is ?0.2%,Change the reflux to distillation,Distilling off toluene,Stir and cool down,When the temperature inside the tank drops to 45 C,Filling the reaction tank with nitrogen,Continue to cool down to 5 C,40 kg of N-(2-hydroxyethyl)-phthalimide was added with stirring.Then add 20kg of sodium hydride,Plus,Close the lid,Stir at 5 C,38.4 kg of ethyl 4-chloroacetoacetate was taken in the measuring tank.45kg of toluene and mix well,Drop into the reaction tank at 5 CAdd a solution of ethyl 4-chloroacetoacetate in toluene,The dripping time is controlled at 4 hours.Plus,Continue to stir the reaction for 2 hours.Slowly warming up,The temperature of the reaction solution was slowly raised to 38 C within 5 hours.The reaction time is more than 12 hours.Warm up to 51 C and keep warm for 1 hour.Until the reaction is complete,Cooling down,Control the internal temperature of 35 C,Add 61kg glacial acetic acid,Plus,Stirring was continued for 60 minutes to stir the material in the reaction solution evenly.The internal temperature is controlled at 35 C.Add 180kg of water,Plus,Continue to stir for 30 minutes.Stop filling with nitrogen,Stop stirring,Stand still and separate the water layer into the bucket.Transfer the toluene layer to the washing tank,Transfer the water layer to the reaction tank,Add 75 kg of toluene to the reaction tank.Stir,Stand still and separate the water layer into the bucket.Then transfer the toluene layer to the washing tank.Transfer the water layer to the reaction tank,Add 75 kg of toluene to the reaction tank.Stir,Rest,Separate the water layer,Combine the toluene layer into a water wash tank,Add 100kg of 25% salt water to the washing tank.Stir for 15 minutes,Let stand for 30 minutes,Divided into the water layer,Toluene solution of 4-[(2-phthalimido)ethoxy]acetic acid ethyl acetate;The yield of amlodipine besylate was 91.1%, and the purity was 99.3%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(2-Hydroxyethyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Shanghai Fenglin Biological Technology Co., Ltd.; Zheng Yulin; Chen Yushuang; Liu Lijuan; Gao Huanhuan; Yu Yaoying; (13 pag.)CN108456160; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 16800-68-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16800-68-3, name is 1-Acetylindolin-3-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

3 – (2 – Thienyl) propyne acid 4 – nitrophenyl-unitz (81.9 mg 0.3 mmol), was obtained. N- Acetylindole -3 -unitz 26.3 mg (0.15 mmol), the carbene-unitz (0.015 mmol), 3.96 mg, 1 diazabicycloundecene 8 – (-7 -) and methylene-methylene chloride shown in Formula 45 mul IV 0.3 mmol were placed in 3 ml a 25 ml unitunito-two-port 3h bottle, and reacted 30 C, under unituniteous conditions, and concentrated, under inert atmosphere protection, unitant-like conditions. The eluate fractions of all the products 10:1 detected were collected by chromatography with petroleum ether: ethyl acetate in the timetime as eluent column chromatography, and the solvent was evaporated to obtain the residue unit, 26 mg and gave rise 58% to unit_.

The synthetic route of 1-Acetylindolin-3-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; China Pharmaceutical University; Du Ding; Sun Kewen; (10 pag.)CN110156800; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 2307-00-8, These common heterocyclic compound, 2307-00-8, name is 5-Amino-2-methylisoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Compound 20: 2-METHYL-5 -IY2-OXO-1 -PHENYL- 1.2-DIHYDRO-3 H-INDOL-3- YLIDENE)AMINO1-2H-ISOINDOLE- 1 ,3(2H)-DIONE: A mixture of 1-phenylisatin (50 mg, 0.22 mmol) and 4-amino-N-methylpthalimide (40 mg, 0.22 mmol) was heated neat at 215 0C for 2 h. The crude material was purified by preparative TLC using a mixture of 3:7 ethyl acetate and hexane as the eluent, giving the desired product as a yellow solid (8 mg, 0.02 mmol, 10 %). 1H NMR (400 MHz): delta 7.88 (d, J = 7.8, IH), 7.83 – 7.80 (m, IH), 7.51 (t, J = 7.5, IH), 7.47 – 7.18 (m, 6H), 7.02 (t, J = 8.0, IH), 6.91 – 6.79 (m, 2H), 6.58 (d, J = 7.5, IH), 3.22 (s, 3H); ESI-MS m/z found 382 (MH+).

The synthetic route of 2307-00-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; HELICON THERAPEUTICS, INC.; WO2008/2946; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 954-81-4, name is N-(5-Bromopentyl)phthalimide, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 954-81-4, Recommanded Product: N-(5-Bromopentyl)phthalimide

General procedure: A mixture of the intermediates 3a-3e (5 mmol) and corresponding secondary amine 4a-4g (5.5 mmol) was added in CH3CN (20 ml) at the presence of anhydrous K2CO3 (6 mmol). The mixture was heated at 65 C for 6-10 h. The solvent was evaporated in vacuo. The residue was dissolved in CH2Cl2 (25 mL), washed with water (20 mL ¡Á 3), and the combined organic phases were washed with saturated aqueous NaCl (30 mL), dried over sodium sulfate, and filtered. The solvent was evaporated under reduced pressure. The residue was purified on a silica gel chromatography using mixtures of petroleum/acetone as eluent to get the target products TM-1~TM-28.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, N-(5-Bromopentyl)phthalimide, and friends who are interested can also refer to it.

Reference:
Article; Sang, Zhipei; Wang, Keren; Wang, Huifang; Yu, Lintao; Wang, Huijuan; Ma, Qianwen; Ye, Mengyao; Han, Xue; Liu, Wenmin; Bioorganic and Medicinal Chemistry Letters; vol. 27; 22; (2017); p. 5053 – 5059;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 2058-72-2, These common heterocyclic compound, 2058-72-2, name is 5-Bromo-1-methylindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: DABCO (0.112 g, 1.00 mmol) was added to a solution of 2a (0.08 g, 0.5 mmol), phenol (0.094 g, 1.00 mmol) and 1a (0.147 g, 1.00 mmol) in acetonitrile (0.5 mL), and the reaction was kept for 2 days. The reaction mixture was then directly subjected to column chromatography (EtOAc/Hexane, 3:10) to obtain the product 3aa as a yellow solid (0.142 g) at 92% yield.

The synthetic route of 2058-72-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Singh, Radhey M.; Bharadwaj, Kishor Chandra; Tiwari, Dharmendra Kumar; Beilstein Journal of Organic Chemistry; vol. 10; (2014); p. 2975 – 2980;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 15861-23-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 15861-23-1, name is Indoline-5-carbonitrile belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 2,3-dihydro-lH-indole-5-carbonitrile (8 g, 0.0556 mol; see step (iv) above) in DCM (50 mL) at 0C was added NN-dimethylaniline (13.5 g, 0.1112 mol) followed by 2-chloropropionyl chloride (8.46 g, 0.0667 mol). The reaction mixture was stirred for 3 h before being diluted with water and extracted with DCM. The organic layer was washed with water and brine, dried over sodium sulfate and then concentrated under reduced pressure. The resulting residue was purified by column chromatography over silica gel to yield the sub-title compound as a pale yellow solid. Yield: 10.5 g.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Indoline-5-carbonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ASTRAZENECA AB; WO2005/123748; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 102359-00-2, A common heterocyclic compound, 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, molecular formula is C9H7NO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of 4 (1.77 g, 10 mmol) in 120 mL ofdichloromethane and 10 mL of DMF was added 4-methylmorpholine or DIEA (10 mL), TBTU (4.81 g, 15mmol) and aniline derivatives (11 mmol). The mixture wasstirred under room temperature for 18 h and washed in turnwith 5% sodium carbonate solution, 5% citric acid solutionand saturated sodium chloride solution. After dried byanhydrous sodium sulfate, the organic layer was evaporatedto dryness. The residue was purified with flash chromatography(CH2Cl2:CH3OH, 50:1) to afford intermediates 5a-5l, which were used in the next step in short time. To asolution of compounds 5a-5l (1.0 mmol) in 10 mL methanolwas added piperidine (30 muL) and 1H-pyrrole-2-carbaldehyde/furan-2-carbaldehyde (1.0 mmol). The mixturewas stirred at 60 C for 5 h and cooled to room temperature.After kept in fridge overnight, the target compounds 6a-6land 7a-7l were obtained in high yields.

The synthetic route of 102359-00-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ai, Juntao; Lv, Meng; Li, Xiaohui; Chen, Zhuo; Hu, Gaoyun; Li, Qianbin; Medicinal Chemistry Research; vol. 27; 1; (2018); p. 161 – 170;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 104618-31-7 as follows. Application In Synthesis of 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione

(b) 4-(Phthalimido)-cyclohexanone 95 g (0.388 Mol) of 4-(phthalimido)cyclohexanol are dissolved in 600 ml of chloroform and, after the addition of 450 ml of water and 120 ml of sulfuric acid, 90 g (0.3 Mol) of potassium dichromate are added in batches. The internal temperature of the mixture is maintained at between 25 and 30 C. by slight cooling. The mixture is stirred for a further 3 hours, then the chloroform phase is separated of and the mixture extracted twice more with chloroform. After drying and concentration of the extracts 82 g (86.9% of theory) are obtained.

According to the analysis of related databases, 104618-31-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dr. Karl Thomae GmbH; US4731374; (1988); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

56341-37-8, name is 6-Chlorooxindole, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: indolines-derivatives

General procedure: To a 25 mL round bottomed flask was added different substituted oxindoles 8 (0.2 mmol, 1.0 equiv.) and bromoethylsulfonium salt 9 (132.99 mg, 0.3 mmol, 1.5 equiv.), DMF (2 mL). The mixture was stirred at room temperature for 5min and Et3N (61.88 mg, 0.6 mmol, 3.0 equiv.) was added into reaction system. The mixture was stirred for 6h at room temperature until the reaction completed, quenched with saturated ammonium chloride solution (5 mL), and was extracted with EtOAc (3¡Á30 mL). The combined organic layer washed with H2O (2¡Á10 mL), dried with anhydrous sodium sulfate. After concentration, product was purified using column chromatography on silica gel with suitable eluent.

The synthetic route of 56341-37-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Qin, Hui; Miao, Yuanyuan; Zhang, Ke; Xu, Jian; Sun, Haopeng; Liu, Wenyuan; Feng, Feng; Qu, Wei; Tetrahedron; vol. 74; 47; (2018); p. 6809 – 6814;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem